Cisco VPN :: RVS4000 / QuickVPN Certificate Doesn't Exist

Jul 26, 2011

I have created a VPN client account on my RVS4000 router. I have installed Quick VPN on my laptop in the default directory -- Program Files (x86) / Cisco Small Business / Quick VPN Client
 
I have generated and exported a certificate -- RVS4000_Client.pem -- and placed that in the  Program Files (x86) / Cisco Small Business / Quick VPN Client directory. When I attempt to connect using the Quick VPN client, I get the warning "Server's certificate doesn't exist on your local computer."
 
If I ignore the message I can log in, and ping resources inside the network and log into the router. However, I cannot mount any drives and the router shows that no VPN tunnels exist. I've read several posts here and elsewhere and can't seem to see where I've gone wrong.

View 1 Replies


ADVERTISEMENT

Cisco Routers :: RV110W And QuickVPN - Servers Certificate Doesn't Exist

Dec 19, 2011

After a day of troubleshooting I have finally got the QuickVPN client to work.  I connect however during the connection I get: "Server's certificate doesn't exist on your local computer.  Do you want to quit this connection?" I click no and it connects fine other than this error.  So how do I get rid of this error? Also I have exported the client certificate from the RV110 and put it in the quickvpn directory as I saw suggested elsewhere.

Here is my log:
 
2011/12/21 00:39:44 [STATUS]Connecting...
2011/12/21 00:39:44 [DEBUG]Input VPN Server Address = ***.***.***
2011/12/21 00:39:45 [STATUS]Connecting to remote gateway with IP address: **.**.**.***
2011/12/21 00:39:50 [WARNING]Server's certificate doesn't exist on your local computer.
2011/12/21 00:39:56 [STATUS]Remote gateway was reached by https ...

[code]....

View 2 Replies View Related

Cisco Routers :: WRVS400n - QuickVPN Server's Certificate Doesn't Exist On Local Computer

May 7, 2012

I bought a new WRVS400n recently because it had Gigabit speed, wireless n and a built in VPN server.  The device works perfect except for the Quick VPN client.  I'm a system engineer so I thought I could set it up quite easy just like any other device I configured in the past.  Painfull but it isn't like this.
 
  I set up the VPN on the WRVS4400n and generated a certificate.  I saved both the client and admin certificate to my pc, I gave them a name to easily make up the difference between both of them.  When placing the certificate in the installed QuickVPN folder, it doesn't seem to get recognised by the QuickVPN software. When I try to connect, it says 'Server's certificate doens't exist on your local computer'.  I guess the naming convention must meet some kind of format, is that correct?  If so, this should have been described in the documentation.
 
Besides that I checked if the required ports used by the VPN server are open on the public port of the device, that is the case.  So It seems I'm quite close to get it working.
 
The version of QuickVPN I used is 1.4.2.1.  The WRVS4400n has the latest firmware loaded.

View 1 Replies View Related

Cisco VPN :: RVS4000 Router VLAN Using QuickVPN?

Apr 18, 2010

I'm trying to connect through a VPN to RVS4000 router that I have VLAN'ed into two seperate networks 192.168.1.x (default) and 192.168.77.x. When i connect with the QuickVPN Client, I have no problems seeing devices on the 192.168.1.x network but i can't see the 192.168.77.x devices; so i'm assuming that the QuickVPN client software puts me on the default network and not the "77" network. Thing is, i only want to VPN into the "77" network and not the 192.168.1.x network.
 
Will QuickVPN allow me to do this? If not how do I VPN into the 192.168.77.x network?

View 4 Replies View Related

Cisco Routers :: QuickVPN In Windows 7 Not Connecting To RVS4000

Oct 11, 2011

When I use QuickVPN under XP, I connect to my RVS4000 without problems.  When I switch to new computer running Windows 7 and V4.2.1 QuickVPN I can get all the way to Verifying Network.   Then I get the message that: "The remote gateway is not responding.  Do you want to wait?"  - repeatedly.  The icon in the tool bar remains with a red slash and I am unable to ping devices on the lan side of the router.  However, when I check the VPN Summary on the router, I see that it thinks I'm connected.  When I check the VPN log I see that I am not:
 
Oct 12 10:27:53 - Configuration changed!
Oct 12 10:28:33 - Configuration changed!
Oct 12 10:28:34 - [VPN Log]: added connection description "ValR_rw_rw"

[Code]....

I've disabled MS Security Essentials and made sure the Firewall is on.  IPSec  Policy Agent and IKE and AuthIP IPSec Keying Modules services are both started.  I've created a rule to allow QuickVPN throught the firwall in and out and a rule to let traffic on 443 and 60443 UDP and TCP through the Firewall. 

View 19 Replies View Related

Cisco Routers :: RVS4000 - VPN Client And QuickVPN On Same Windows PC

Sep 21, 2011

Is there a safe way to use the Cisco VPN Client (V5.x) and Cisco Quick VPN (V1.4.1.2) on the same Windows PC?  I need to access my office RVS4000 and my customer's PIX 506 from the same laptop (but not at the same time).
 
Perhaps I should be asking "Is there a single Windows VPN client that works with both the Cisco RVS4000 and Cisco PIX 506? I have seen these questions asked on various forums but have yet to see a definitive answer. 

View 2 Replies View Related

Linksys Wired Router :: RVS4000 - Set Up QuickVPN Client?

Apr 27, 2008

How to setup quickvpn to work with RVS4000.

View 9 Replies View Related

Cisco Routers :: QuickVPN Windows 7 64bit RVS4000 Don't Ping

Dec 17, 2011

Using the latest Cisco QuickVPN, my Windows 7, 64 bit laptop processes the QuickVPN connection to the point where the laptop attempts to ping the router and verify the connection.  Those pings fail.Windows firewall is ON and IPSEC is started on the laptop.  I have tried Kaspersky's firewall both enabled and disabled with no change.

View 19 Replies View Related

Cisco Routers :: RVS4000 QuickVPN - The Remote Gateway Is Not Responding

Apr 4, 2012

I am trying to connect with QuickVPN to my RVS4000 in another location. I get this message: "The remote gateway is not responding. Do you want to wait?'

View 15 Replies View Related

Cisco Routers :: Setup QuickVPN To RVS4000 With Windows 7 (64bit)?

Sep 13, 2011

I have a home network with an Actiontec Q1000 providing me 20 meg down and 5 meg up speeds.  The DSL modem supports DHCP, DMZ, port forwarding, application forwarding, filtering, etc.  I have an existing network 192.168.0.x that uses a combination of DHCP and static IP addresses for printers, scanners, and servers.I just purchased a RVS4000 and configured its LAN port to accept a DHCP address.  It received the .26 address.  I set up application and port forwarding so all VPN traffic goes to this address.  I also put the router in the DMZ and turned off all firewalls.On the LAN side of the RVS4000 I use the 192.168.1.x address and have the 4000 provide DHCP addresses.  I have a PC connected to the LAN port and it has the address of 1.100.  I am able to use TeamViewer to connect to this through the internet and I can also access the devices on the Actiontec network from the PC connected to the 4000.I set up the VPN as best I could while going through appendix B of the admin guide.  When I am at a remote location and use the QuickVPN client to access the 4000 I get the message, "The remote gateway is not responding.  Do you want to wait?'.  When I look at the log everything looks good except I get the following error:
 
[WARNING]Failed to ping remote VPN Router!
 
I am unable to get a DHCP address for my remote PC and am unable to ping any device on either network.  What do I have configured wrong that this is not working?I only purchased this so I can use the VPN.  Is the VPN established on the Actiontec LAN or on the RVS4000 LAN side?  I am obviously connecting to the 4000 but am just not getting an address so I can not use my home office network for all my communications.

View 1 Replies View Related

Cisco Routers :: Self-signed Certificate With RV220W And QuickVPN Client?

Nov 21, 2011

The establishment of IPSEC tunnel between the RV220 and QuickVPN client works properly with the security certificate of origin of the router.RV220 V1.0.3.5QuickVPN V1.4.2.1
 
Since the establishment of a security certificate self-signed, the RV220 and QuickVPN client refuses to work together .

Here are the log of the QuickVPN client

2011/09/27 12:45:14 [STATUS]OS Version: Windows 7
2011/09/27 12:45:14 [STATUS]Windows Firewall Domain Profile Settings: ON
2011/09/27 12:45:14 [STATUS]Windows Firewall Private Profile Settings: ON
2011/09/27 12:45:14 [STATUS]Windows Firewall Private Profile Settings: ON

[code].....

View 4 Replies View Related

Linksys Wired Router :: RVS4000 - QuickVPN Client For BlackBerry

Feb 2, 2012

I connect to my RVS4000 VPN router using QuickVPN. Very useful. 
 
Sometimes I am not near my laptop and need to check data. 
 
Is there a QuickVPN or compatible client for a BlackBerry Torch 9850, even if it's only functional when connected to WiFi?

View 1 Replies View Related

Cisco Routers :: RVS4000 - QuickVPN Client / Cannot Connect To Drive Or Computer

Sep 1, 2011

I have a RVS4000 router, and using Quick VPN client (latest version, 1.4.2.1?) on a computer with Windows Vista.  I can connect to the router, and I can see computers, and drives on the network. When I click on a drive or computer, I can't connect to the devices.  Local IP address are 192.168.1.x, remote is 192.168.2.x.

View 9 Replies View Related

Wireless Connecting Ability Doesn't Exist On Windows XP

Jun 16, 2012

How to connect my Windows XP Desktop to my homes wireless network system (my comp is outdated I know  ). I have no trouble with my my mum's Windows 7 Laptop and no problems with my MacBook Pro, but how do I connect this old clunky XP to it?

Wireless Connections doesn't exist in my network connections tab, and in Services under Admin Tool - in the 'Wireless Zero Configuration Properties' is set to Automatic startup type and it is 'started'.

View 1 Replies View Related

Cisco Wireless :: AIR-LAP1242AG-A-K9 Configure Command Doesn't Seem To Exist

Oct 21, 2007

I have an AIR-LAP1242AG-A-K9. Straight out of the box I thought it would have the GUI functional but this is not the case. I am brand new to Cisco products so it is taking me a while to get use to them and to TelNet but from what I have read in about 6 different manuals none have explained how I can access the configure terminal command when It doesn't show up. I am in privileged mode with access of: AP001c.588e.a266#show privilege. Current privilege level is 15.If I can't get into global configuration mode I cant enable the GUI, turn on the wireless.

View 6 Replies View Related

Cisco AAA/Identity/Nac :: ACS 4.2 Authorization Failed By User That Doesn't Exist

Jan 8, 2013

I am getting Authorisation requests failed log entries for a user however there aren't any successful authentication logs.
 
The user would never be able to authenticate as it no longer exists in ACS (it was the user for someone who left the company 3-4 month ago)
 
The other wierd thing is that the caller-id is 0.0.0.0 BTW the NAS is a Cisco ASA firewall running 8.0(3)

View 4 Replies View Related

Cisco Switching/Routing :: 2950 Error Would Be That Sticky Command Doesn't Exist

Jun 5, 2013

I'm having an issue with port-security on a cisco 2950 switch. The port-security is setup to user sticky mac-addresses and was working just fine. Recently when a computer was changed out and I needed to clear the security on the port it wouldn't let me.I would type clear port-security sticky int fa0/## and it would give me an error. The error would be that the sticky command doesn't exist.So I went back and type clear port-security ? and the only option was dynamic. Even if I try to take the port security off the switch it wont let me, it never shows the option for sticky.If I change the maximum number of mac-addresses allow the computer will work, but I can never clear the old addresses out.

View 3 Replies View Related

Cisco Routers :: RV110W QuickVPN Doesn't Work

Mar 10, 2013

I have a problem with my RV110W router. I would like to setup Quick VPN access. Manual is quite straightforward: enable management, create users, install client and that's all, should be working. But NOT. it does not work.
 
Remote Management is enabled on port 8080. Should it be changed to 443 as required for QVPN? Or it does not matter. Is it ok, to have management on 8080 and QVPN on 443?
 
I have tried to connect via QVPN Client ver. 1.4.1.2. Of course ip as well as user and pass has been changed. I tried to change management port to 443, but first:

1. i was not able to access management console at all

2. QVPN - still did not work

View 4 Replies View Related

Cisco VPN :: RVS4000 Router Doesn't Give Out An IP Address To A Client

Aug 9, 2011

RVS4000 router doesnt give out an IP address to a client connecting with QVPN v1.303, connection seems good, router logs the connection and tracks its duration etc but client side does not get an IP from the RVS4000 side -keeps local LAN ip + there is no access to the remote shares etc. RVS 4000 has DHCP enabled. Client side subnet is different to the VPN side. VPN users are setup correctly (Router logs the user as connected) . Port 443 is not setup in port forwarding.

View 3 Replies View Related

Cisco Routers :: RVS4000 Doesn't Give Out IP Address To Client?

Aug 16, 2011

RVS4000 router doesnt give out an IP address to a client connecting with QVPN v1.303 (or v1.4..- tried that too), connection seems good, router logs the connection and tracks its duration etc but client side does not get an IP from the RVS4000 side -keeps local LAN ip + there is no access to the remote shares etc. RVS 4000 has DHCP enabled. Client side subnet is different to the VPN side. VPN users are setup correctly (Router logs the user as connected) . Port 443 is not setup in port forwarding. (posted in LAN Routing & Switching 2 days ago but I got no response so I thought Id try here !)

View 3 Replies View Related

Cisco VPN :: RVS4000 Connection Doesn't Establish / Cannot Ping Remote Server

Sep 6, 2012

I have a RVS4000 with client VPNs setup and have created all 5 users......trouble I run into is that when one of the users attempts to connect to the VPN from a second device (ie the sixth device to connect to the VPN), the connection does not establish....cannot ping remote server (using QuickVPN).  In looking at the logs, the device that isn't working is getting a different IP (172.16 vs 192.168).  I know I'm limited to 5 users, but am I limited to 5 devices as well?

View 2 Replies View Related

Cisco AAA/Identity/Nac :: %ASA-3-717009 / Certificate Validation Failed / Certificate Date Is Out-of-range

Jan 30, 2012

There is ASA with remote access VPN and users are authenticated using third party signed certificates (CA is not local in ASA).When user certificate expires i can see it in syslog messages. For example:
 
     %ASA-3-717009: Certificate validation failed. Certificate date is out-of-range, serial number: (...)
 
I would like to know if there is an opportunity to view user's certificate expiry date beforehand, say, 3 days before?

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ISE 1.1.1 Don't Have Certificate Authority Certificate Anymore?

Oct 19, 2012

i am working on ISE 1.1.1, surprisingly i couldn't found certificate authority certifiate at certificate operation anymore.
 
would it be the change on GUI? So now where i can import the CA certificate to ISE?

View 5 Replies View Related

Cisco WAN :: NAT Does Not Exist Twice On 1841

Apr 28, 2013

a have a router CISCO 1841 and I configured a NAT inside from the router to the firewall like this :ip nat inside source static firewall_adresse  public_adresse and its work fine and when a added it I do this command "wr" to save the configuration and I restarted the router many times and it still work fine,but in the last five months this NAT does not exsit twice and I must add it a gain.

View 7 Replies View Related

Cisco WAN :: How Many Sub-interfaces Can Exist On 6509

Jan 6, 2012

Is there a limitation to the amount of sub-interfaces that can exist on a Cisco 6509? The switch has WS-SUP720-3B (Sup card), WS-X6724-SFP (linecard), and 12.2(33)SXH7 (IOS). 

View 7 Replies View Related

Do Streaming Files Actually Exist?

Apr 27, 2012

Everyone speaks about video and music streaming, however I am under the understanding that there isint actually any such thing as legitimate real time streaming, ALL files are saved to the disk or the RAM. If this was not the case, disrupting your Internet connection would cause an instantaneous crash of the streaming media, and well, I have had my Internet crash a lot of times while viewing streaming median and in every case it continued to play for some time.

View 5 Replies View Related

Cisco :: Interface Tunnel Command Does Not Exist?

Oct 21, 2012

I am using ASA 5520 Image in GNS3, when i come in Configuration Mode and try to create Tunnel through command "interface Tunnel 0", but this command doesn't exist. I need this command to create Tunnel for GRE Lab.

View 2 Replies View Related

Cisco :: Access-list Does Not Exist In The Configuration?

Jan 12, 2012

so far i also knew that if u assign an access-list to an interface:

for example:
int vlan1
ip access-group 150 in

and the access-list does not exist in the configuration it will block everything meaning it will be an implicit deny empty access-list but lately i've noticed on new routers that its different,if i assign an acl to an interface where the acl doesnt exist in the configuration it acts as permit all,

View 3 Replies View Related

LAN Disconnecting Wireless Internet / Can They Co-exist

Oct 20, 2012

I've got a LAN set up with a server and printer, no internet connectivity to it. When I need to access the internet, I connect through a wireless hotspot. The only problem is that I have to unplug the ethernet from my LAN connection for the wireless to work.Is there a way to have both connections coexist, so that when I need to print something or access a file on my server I can do so without it interfering with my internet connection?

View 4 Replies View Related

Belkin Routers :: F5D7632-4 Don't Seem To Exist?

Apr 13, 2013

I know my Modem/router is old but I am connecting okay to the internet with my laptop, the thing is my husband has just bought a Google Nexus Tablet and although it finds my Belkin Modem (model F5D7632-4) it says it's finding IP address, then says its saved and then connecting, but it dont connect. Also there is no security on it and it wont find my model number to add the security, is it me or what?

View 1 Replies View Related

ICS Dependency Service Does Not Exist Or Has Been Marked For Deletion

Jan 16, 2012

Let me try to give as much info as I can to start. Running Windows 7 64bit Ultimate have all updates as of 01-16-2012. Recently had some malware that I removed not sure if there is a correlation. I am trying to connect my wireless connection on my pc to a router to run xbox and BD player. So I connect to my wireless network have my network card plugged into my router, connected to both networks. I go to properties on wireless connection click sharing tab check allow other network users to connect to the internet through this computer connection, also checked allow other network users to control or disable the shared internet connection. I click ok and get a error window that says in the title bar Network Connections the body of the window says, "An error occurred while Internet Connection Sharing was being enabled. The dependency service does not exist or has been marked for deletion. I looked through services and device manager in non pnp drivers everything looks right to me... I am not super familiar with networking issues so I may have missed or overlooked something easily.

View 12 Replies View Related

Cisco Wireless :: 881W - Unified Setup / Bootimage Does Not Exist?

Feb 20, 2012

I'm setting up a couple 881W cisco routers to use Unified wireless and am running into a bit of a brick wall.I've read through the "Upgrading to Unified Cisco Software" section of the following article:[URL]The problem is, I can't run the "service-module wlan-ap0 bootimage unified" command. The keyword "bootimage" does not exist. The router is licensed for advipservices and I'm running version 15.0(1)M4 on the router. AP is currently running version 12.4(21a)JA1. why the bootimage command doesn't appear? Will I need to downgrade the router IOS to 12.4?Additionally I'm having trouble finding an answer to the following:Is there a way to set up the embedded AP on the same network as the Data VLAN on the router, or do I need to create a separate IP network for the embedded AP? I've tried using 'ip unnumbered vlan10' (vlan10 is the data vlan) on the wlan-ap0 interface but then when I try opening a session to the AP it doesn't connect.
 
bcp4n51001#service-module wlan-ap0 session
Trying 10.199.62.1, 2002 ...
% Connection timed out; remote host not responding
 
This is my Vlan10 setup for one of the routers:
 
interface Vlan10
ip address 10.199.62.1 255.255.255.0
ip helper-address 10.151.103.254
ip helper-address 10.150.1.254
ip pim sparse-mode

View 8 Replies View Related

Cisco Wireless :: 4400 WLC / Error - Object Dot11BandSelect Does Not Exist

Oct 30, 2012

Received Error:Object "Dot11BandSelect" does not exist. when configuring the 802.11 settings on a 4400 WLC runing ver. 6.0.196.0

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved