Cisco :: Interface Tunnel Command Does Not Exist?

Oct 21, 2012

I am using ASA 5520 Image in GNS3, when i come in Configuration Mode and try to create Tunnel through command "interface Tunnel 0", but this command doesn't exist. I need this command to create Tunnel for GRE Lab.

View 2 Replies


ADVERTISEMENT

Cisco Wireless :: AIR-LAP1242AG-A-K9 Configure Command Doesn't Seem To Exist

Oct 21, 2007

I have an AIR-LAP1242AG-A-K9. Straight out of the box I thought it would have the GUI functional but this is not the case. I am brand new to Cisco products so it is taking me a while to get use to them and to TelNet but from what I have read in about 6 different manuals none have explained how I can access the configure terminal command when It doesn't show up. I am in privileged mode with access of: AP001c.588e.a266#show privilege. Current privilege level is 15.If I can't get into global configuration mode I cant enable the GUI, turn on the wireless.

View 6 Replies View Related

Cisco Switching/Routing :: 2950 Error Would Be That Sticky Command Doesn't Exist

Jun 5, 2013

I'm having an issue with port-security on a cisco 2950 switch. The port-security is setup to user sticky mac-addresses and was working just fine. Recently when a computer was changed out and I needed to clear the security on the port it wouldn't let me.I would type clear port-security sticky int fa0/## and it would give me an error. The error would be that the sticky command doesn't exist.So I went back and type clear port-security ? and the only option was dynamic. Even if I try to take the port security off the switch it wont let me, it never shows the option for sticky.If I change the maximum number of mac-addresses allow the computer will work, but I can never clear the old addresses out.

View 3 Replies View Related

Cisco WAN :: 1941 Router - Enable IPSec Virtual Tunnel Interface With Tunnel Mode IPv4

Sep 23, 2012

I'm in process of purchasing a new Cisco routers for our branches that will be used primary to enable IPSec virtual tunnel interfce with "tunnel mode ipsec ipv4". does the default IOS IP Base supports this feature? or i need to purchase DATA license or SECURITY license?

View 4 Replies View Related

Cisco WAN :: Getting 1941 Tunnel Bandwidth Command?

May 13, 2011

I have a Cisco 1941 router with the Security license running IOS c1900-universalk9-mz.SPA.151-4.M.bin.  Is there a "tunnel bandwidth" command like with routers that have the Advanced IP Services license?  My concern is being able to adjust the bandwidth to a value greater than 8 Mbps...

View 3 Replies View Related

Cisco :: 3560 - Missing IPv6 Tunnel Command?

Sep 17, 2011

I've finally got my 3560 switch IPv6 capable (IP Services IOS), but I've stumbled upon something strange: I can configure a tunnel interface, but I can't put the tunnel in ipv6ip mode. The command is missing. I can choose GRE, IP in IP, and a bunch of other things, but no ipv6ip. I'm a bit desperate here and probably I am going to have to live with it, but just in case? I need the IPv6 tunnel for an uplink to a tunnel broker which only supports this type of tunnel, and I'm surprised this is missing.

View 4 Replies View Related

Cisco VPN :: ASA5540 Any Command To Check Tunnel Up-time

Mar 17, 2011

I am using cisco ASA 5540, Is there any command to check the tunnel uptime?

View 2 Replies View Related

Cisco VPN :: 3925 - LAN-LAN IPsec Tunnel Command Unavailable

Apr 14, 2011

I'm looking to utilize one of my 3925's to create a LAN-LAN IPsec VPN tunnel with another site.
 
I was under the impression that I needed to get a securityk9 license installed and then I would be good to go.   I got a temporary 60 day trial license and successfully installed it, but none of the commands that I need to create the tunnel are showing up for me.
 
I'm trying to use the "crypto isakmp" command, but that is not showing up: Router(config)#crypto ?   ca   Certification authority   key  Long term key operations   pki  Public Key components
 
Here's my show license:
Index 2 Feature: securityk9
Period left: 633 weeks 4  days
Period Used: 0  minute  0  second
License Type: Evaluation
License State: Active, Not in Use, EULA accepted
License Count: Non-Counted
License Priority: Low

View 7 Replies View Related

Cisco VPN :: ASA5500 / Command To Check Tunnel Up-time?

Jun 27, 2011

I am using ASA5500 series box which has a site to site tunnel terminated on it.Is there any command by which we can check the up time of the tunnel.
 
ASA# sh isakmp sa
   Active SA: 1    Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)Total IKE SA: 1
1   IKE Peer: x.x.x.x    Type    : L2L             Role    : responder     Rekey   : no              State   : MM_ACTIVE

View 2 Replies View Related

Cisco WAN :: 3845 Remove Tunnel Mode RBSCP Command

Sep 19, 2011

I am trying to implement RBSCP on two 3845s running 15.1(4)M1 Adv Enterprise over a satellite link.  The "show" commands all look correct, but whenever I policy route my machine through the RBSCP tunnel I dont even make it to the opposite side.  However, if I remove the "tunnel mode RBSCP" command so it acts like a regular GRE tunnel, I route through it just fine.  So I know its not a NAT, routing issue.  [code]

View 1 Replies View Related

Cisco Firewall :: Command To Check IPSEC Tunnel On ASA 5520?

Jan 7, 2013

Need to check how many tunnels IPSEC are running over ASA 5520.Tried commands which we use on Routers no luck?

View 6 Replies View Related

Cisco WAN :: 1841 - Show DSL Interface Command

Jul 15, 2012

I'm trying to troubleshoot one of our site today and can't seem to issue the show dsl interface command on a 1841 router. Does the same command is used for SHDSL or am I running with an IOS bug?
 
#sh dsl? 
% Unrecognized command
 
#sh ver
Cisco IOS Software, 1841 Software (C1841-BROADBAND-M), Version 12.4(15)T7, RELEASE SOFTWARE (fc3)
Technical Support: {URL}
Compiled Wed 13-Aug-08 15:42 by prod_rel_team
 
#sh inv 
NAME: "chassis", DESCR: "1841 chassis"
PID: CISCO1841         , VID: V05 , SN: FHK13212639
 
NAME: "WIC/HWIC 0", DESCR: "WAN Interface Card - ATM (With multi line G.SHDSL module)"
PID: WIC-1SHDSL-V3     , VID: V02 , SN: FOC132041KD

View 4 Replies View Related

Effectively Use Of Passive - Interface Fa0 / 0 Command

Apr 29, 2011

I don't really know how this things work, but somehow i know that when you summarized few subnets into 1 in RIPv1 protocol in router, you would need this command, but how this things actually works?

View 5 Replies View Related

Cisco :: ASR 1013 - Command Of Rate Limit On A Sub Interface

Jul 23, 2012

I am looking for the command of rate-limit on a sub-interface in cisco asr 1013.
 
Cisco IOS Software,
IOS-XE Software (X86_64_LINUX_IOSD-ADVENTERPRISEK9-M),
Version 15.2(2)S, RELEASE SOFTWARE (fc1)
IOS XE Version: 03.06.00.S

If it is possible in Cisco asr 1013. If yes then what are the commands.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 Configure Command Set Only To Allow Interface Access?

Jul 6, 2011

I had insatalled the ACS 5.2 on Vmware . As per my requirement i need to configure a user to restricted privilege so that he should be able to execute only the below commands on the switch .
 
-Show ver
-Show interfaces
-Show ip Interface Brief
-Configure terminal
-Interface <interface name >
-Shutdown
-No shutdown
 
The users should not be authorized to execute any other commands than above listed one .After the configuration i was not able to restrict the config mode commands . Once the user is  authoized for  Configure terminal access  he will have full access on the device. How to configure the command set only to allow  interface access and he should be able to apply Shutdown and No shutdown command .

View 6 Replies View Related

Cisco Switching/Routing :: 3560 Ip Command Is Not Available On Interface

Apr 4, 2013

I am using cisco packet tracer to configure the hsrp on 3560 (c3560-advipservicesk9-mz.122-37.SE1.bin) but the standby ip Command is not available on the interface  the problem in that IOS or in config

View 1 Replies View Related

What Happens Internally When No Shut Command Given On Router Interface

Aug 13, 2012

what happens internally when no shut command is given on the interface of router.The router interface goes up. How? What happen internally on the interface of the router?

View 8 Replies View Related

Cisco Routers :: Does RV180W Offer Command-line Interface

Apr 15, 2012

12 users, 3 servers, 5 smartphones/tables on the WiFi (existing AP), future VPN server (maybe 5 simultaneous inbound VPN connections at the most with at least one client using a Mac), Cisco Gigabit small business switch.Internet access, VPN connectivity, and firewall (reporting, close/open ports for custom applications as needed)I was originally going to select an ASA5505-50 user device for the above client.  The device is highly regarded on the Internet, offers a command line interface, priced right for the budget and should perform all duties required by the client.However, the addition of the RV180W to the Cisco product line has me questioning my choice. 
 
1)Does the RV180W offer a command-line interface?
 
2)Is the RV180W limited in the number of users it can support without having to purchase additional user licenses?
 
3)How are firmware/software upgrades handled with the RV180W?
 
4)What will the client be giving up if they choose the RV180W vs. the ASA5505?

View 1 Replies View Related

Cisco Command Similar To Junipers Monitor Interface Type / Number?

Mar 9, 2011

Any Cisco command similar to Junipers monitor interface interface type / number. It's handy seeing real time interface stats. monitor interface?

View 5 Replies View Related

Cisco Switching/Routing :: Getting Nexus 5000 Command (default Interface X / X)

Jun 26, 2012

when will be the command "default interface x/x" on the Nexus 5000 platform available? Even with latest software version (5.1.3.N2.1a) it is not possible. For Nexus7000 it's working fine with 5.2 train.Is there a feature request for it? If not here it is!!It's horrible to deconfigure many interfaces especially in N5k environments with many FEXes.

View 3 Replies View Related

Cisco WAN :: 3620 - Cannot Issue Ospf Neighbor Command With NBMA Interface

Jul 27, 2006

I config my E0/0 Interface with "ip ospf network non-broadcast" command, I want this interface to use uni cast to hello neighbor.
 
As I issue "neighbor x.x.x.x" under ospf process, it told me that: OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint networks. I am sure that there are no any typo, and show ip ospf interface e0/0 says it's been an NBMA interface, so what's wrong with this router?
 
IOS information:
(C3620-J1S3-M), Version 12.3(18), RELEASE SOFTWARE (fc3)

View 7 Replies View Related

Cisco VPN :: 2811 - IOS Tunnel Interface Keeps Going Down

Sep 7, 2011

I'm seeing on an IOS VPN Tunnel interface which keeps going down and then back up...
 
We have a Cisco 2811 acting as a VPN Hub router on the backbone, which connects to various client sites over VPN. Of the 7 VPNs configured so 6 work well and are generally trouble free. The VPN interface on the other VPN keeps going down ,multiple times throughout the day, just recently the client has been noticing loss of connectivity. The remote router is managed over the VPN so there is always some kind of traffic over it.
 
*Sep  7 06:40:53.631: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel111, changed state to down
*Sep  7 06:41:23.991: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel111, changed state to up

[Code]......

View 2 Replies View Related

Linksys Wireless Adapters :: WAG325N Command Line Interface?

Feb 29, 2012

I want to know if WAG325N supports cisco's IOS so that i can configure it using command line interface? Is it possible?If not, how would i change  ethernet interface speed setting so that it can support 100 mbps of speed. Because when i connect through LAN i'm always getting a full dulplex 10 mbps LAN connection automatically.

View 1 Replies View Related

Cisco :: Command To Show Uptime Of A Router Interface In Days / Hours / Minutes?

Aug 22, 2012

I'm probably overlooking something very simple but is there a command to show the uptime of a router interface in days,hours,minutes?

View 3 Replies View Related

Cisco Switching/Routing :: 3750x - Command Cts Dot1x When Applied To An Up-link Interface

May 7, 2012

we're having an issue with the command "cts dot1x" when applied to an uplink interface.  It basically kils the connection with this command is applied.  Once you remove it, everything is back to normal, the platform is a cisco 3750x.

View 0 Replies View Related

Cisco VPN :: 501 Intra-interface Command And Modifying Encryption Domain On EZVPN Server

Jun 30, 2011

If you have a headsite with multiple EZVPN clients (PIX 501 & 515) connected in  a star configuration can you have one remote site connect to another  remote site using the intra-interface command and modifying the  encryption domain on the EZVPN Server?

View 3 Replies View Related

Cisco Firewall :: ASA 5550 Switch - Change Media Type Command On Interface

Oct 12, 2011

I am switching a switch connecting to the ASA5550 tomorrow. My current switch is using fiber connecting to the ASA. The new one only support copper. If I switch between fiber to copper on the ASA (change media-type command on interface) will it cause a down time? I have VPN tunnel on the ASA and don't want the session to reset.

View 2 Replies View Related

Cisco VPN :: ASA5510 L2L VPN Tunnel End Point Interface?

Feb 12, 2012

Is this kind of configuration possible? Can the VPN tunnel go thru the Firewall to another interface (DMZ) on it? And not to end “outside” interface.I have DMZ network in ASA5510 interface and I like to end the L2L IPsec VPN tunnel on it. The tunnel mas go thru the ASA from Internet via outside to the end point DMZ interface. The traffic is decrypted to that interface.  So the VPN L2L peer interface is the DMZ interface IP address, not the Outside interface IP address.

View 0 Replies View Related

WL-326v1001 - How To Access Sitecom Router Config Interface From Command Line

Apr 20, 2011

I have a sitecom 3G ready wireless router but does not support the local telephone company. i would like to know how to access its modem config from a command line inorder to configure the modem commands with local company settings. Its model no is WL-326v1001

View 1 Replies View Related

Linksys Wireless Router :: How To Open E4200 Command Line Interface

Jan 6, 2012

how to open the Linksys E4200 command line interface? Ive tried using telnet but i get this message:Could not open connection to the host, on port 23.

View 3 Replies View Related

Cisco Switching/Routing :: Nexus 7010 IP Telnet Source-interface Command Not Working

Aug 20, 2012

I have configured the ip telnet source-interface Loopback 0 command on a Nexus7010, but when I telnet to another device and do a show users, the ip address is of the closest interface to the device I telnet to, not the ip address of the Loopback. All interfaces are in vrf default. I am running 5.1(6) NXOS.

View 6 Replies View Related

Cisco VPN :: 5520 Configure Intra Interface Command To Enable Connectivity Between Remote Clients

Feb 3, 2013

I'm working with AnyConnect for the first time (my prior experience is with IPSec client) and I have multiple remote users who connect to a 5520 via AnyConnect client; they need to print to each others' shared printers but currently have no connectivity between each other.
 
Can I configure the 'intra-interface' command to enable connectivity between remote clients, or is there more that needs to be done to enable this, presuming that it can be done at all?

View 3 Replies View Related

Cisco Firewall :: IPSec Tunnel On Sub-interface On ASA 5510?

Jun 11, 2012

I working on a security solution using ASA firewall. Is it possible to setup a IPSec tunnels  on each subinterface of a physical interface on ASA 5510?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved