Cisco AAA/Identity/Nac :: ACS 5.2 Configure Command Set Only To Allow Interface Access?
Jul 6, 2011
I had insatalled the ACS 5.2 on Vmware . As per my requirement i need to configure a user to restricted privilege so that he should be able to execute only the below commands on the switch .
-Show ver
-Show interfaces
-Show ip Interface Brief
-Configure terminal
-Interface <interface name >
-Shutdown
-No shutdown
The users should not be authorized to execute any other commands than above listed one .After the configuration i was not able to restrict the config mode commands . Once the user is authoized for Configure terminal access he will have full access on the device. How to configure the command set only to allow interface access and he should be able to apply Shutdown and No shutdown command .
View 6 Replies
ADVERTISEMENT
Feb 3, 2013
I'm working with AnyConnect for the first time (my prior experience is with IPSec client) and I have multiple remote users who connect to a 5520 via AnyConnect client; they need to print to each others' shared printers but currently have no connectivity between each other.
Can I configure the 'intra-interface' command to enable connectivity between remote clients, or is there more that needs to be done to enable this, presuming that it can be done at all?
View 3 Replies
View Related
Apr 30, 2012
i would like to configure the wireless access on the cisco 877 router either on command line or gui -also, does the wireless authentication and SSID has to be local or can i put the cisco 877 on h-reap mode and connect back to my controllers in head office and use the same SSID as in my head office ?
View 8 Replies
View Related
May 2, 2011
how to map my command shells that I created to the access policies under Default Device Admin/Authorization. All I get an option for is Shell Profile but not commands. See attached doc.ACS 4.2 was easy.. I would just create a command set and apply to a group.
View 5 Replies
View Related
Apr 20, 2011
I have a sitecom 3G ready wireless router but does not support the local telephone company. i would like to know how to access its modem config from a command line inorder to configure the modem commands with local company settings. Its model no is WL-326v1001
View 1 Replies
View Related
Sep 10, 2012
Just got my server team to install ACS 5.3 on a virtual machine.Unable to access the web interface url...Nothing happens when i try and access this.how i can fault find this as i have cli access.
View 8 Replies
View Related
Jun 4, 2013
Our ASA 5510 was configured with a public interface, a DMZ interface, and a private interface. I have a remote access VPN using AnyConnect client and LDAP authentication for Active Directory. We are changing ISP (groan!), which means all new public IP addresses. The new circuit is installed, so I have a second public interface (same security level as the first public interface, wholly different IP address range) enabled on the ASA. I hope to transition whatever I can, which means get the VPN access through either public interface. Can I just enable client access on the second public interface at the Anyconnect Connection Profiles tab in ASDM? That seems too simple. Can they share the one address pool?
View 1 Replies
View Related
Aug 12, 2012
I am adding a second external connection to an existing system on an ASA 5510 with ASA V8.2 and ASDM 6.4. I added the new WAN using an other interface (newwan).
The intention is to route most internet traffic over the new route/interface (newwan) but keep our existing VPNs using the former interface (outside).
I used the ASDM GUI to make the changes and most of it works.ie. The default route goes via (newwan). Outgoing VPNs of a site to site nature use the previous route via (outside) as they now have static routes to achieve this.
The only problem is that incomming Remote Access Anyconnect VPNs are not working. I set the default static route to use the new interface (newwan) and the default tunneled route to be via (outside) but this is the point is goes wrong....
I can no longer ping the outside IP address from an external location. It seems the outside interface does not send traffic back to the - outside interface (or at least that's where I think the problem lies). How do I force replies to the incomming VPN remote traffic from unknown IPs to go back out on the outside interface?
The only change I need to make to get everything working on the outside interface again is to make the Default Static route use the outside interface. Which puts all the internet traffic back on the original (outside) connection.
View 6 Replies
View Related
Aug 21, 2011
I am new to ACS 5.1.I need to configure the ACS to act as the 802.1x authentication Server, as well as, act as the Radius Server for the authentication and authorization process when I access the switch.
I had created Two rules (under the Access policy) to cater for the two scenario, it will always "stuck" at the 1st rule. For e.g. Rule-1 is meant for the 802.1x, Rule 2 is meant for the AAA process. When I tested with 802.1x, it worked perfectly. But when I tested to login to the switch, it always failed. Based on the log, Rule1 is not able to fulfill my requirement (of course it can't). I thought the rules check process will proceed with Rule-2, but apparently it did not.
View 2 Replies
View Related
May 19, 2013
Is there a way to configure the GIG 0 interface on the 1552E Access Points to 10 Meg Full Duplex? Currently they will only work in Auto/Auto
View 3 Replies
View Related
May 1, 2013
I'm trying to configure ACS 5.4 as radius server for network access (PPP connections).In monitoring and reports the users have green color , but the clients cannot send data. Auth method is CHAP/MD5.
Allowed protocols are set to CHAP and PAP only.
View 5 Replies
View Related
Jul 26, 2012
I have an auditor wanting a screenshot of all users that have acces to configure our firewall, I am unfamiliar with 5.1. Is there a way of running such a report on a paticular device?
View 1 Replies
View Related
Jun 11, 2011
I try to configure in both Clean Access Manager and Switch 3560E-24Ps on SNMP Version 2 protocol but I can't make it working together (For CAM and Switch 3560G-48Ps I can do that). [code]
View 3 Replies
View Related
Aug 27, 2012
I have setup an Identity Firewall on a ASA version 5.6 on a DMZ interface.I have installed the ADAgent on a domain member Win2008 and configured as follows: [code]
where ashdew is a domain user and ACL 122(only one line) is applied on the dmz interface and NAT is properly configured.The ADagent has been properly tested and ASA can register to it.The ASA can connect to AD DC controller and query user database.I have placed a laptop ip 172.17.h.x on the DMZ and can ping the DMZ interface.
The laptop cannot authenticate on the domain and the asa does not seem to retrieve the user identity.Do I need to add extra rules in the access-list 122 to permit trafic to DC?Can I check on the AD Agent if it can retrieve the user to ip mapping ?
View 6 Replies
View Related
Jun 28, 2012
I am attempting to configure Radius authentication accross a site-to-site VPN for my ASA 5510-01 for remote access.
ASA5510-1 currently has a live site to site to ASA5510-2.
ASA 5510-1 - 10.192.0.253
ASA 5510-2 - 172.16.102.1
DC - 172.16.102.10
ASA5510-01 can ping the DC and vica versa but is unable to authticate when i perform a test. ASA5510-01 can authenticate to a DC on it;s own LAN but not on the remote LAN that DC sits on.
I have double checked the 'Server Secret Key' and ports as well as various users which all work locallly. ASA5510-02 authenticates to DC with no problems.
View 3 Replies
View Related
Oct 21, 2012
I am using ASA 5520 Image in GNS3, when i come in Configuration Mode and try to create Tunnel through command "interface Tunnel 0", but this command doesn't exist. I need this command to create Tunnel for GRE Lab.
View 2 Replies
View Related
Jul 15, 2012
I'm trying to troubleshoot one of our site today and can't seem to issue the show dsl interface command on a 1841 router. Does the same command is used for SHDSL or am I running with an IOS bug?
#sh dsl?
% Unrecognized command
#sh ver
Cisco IOS Software, 1841 Software (C1841-BROADBAND-M), Version 12.4(15)T7, RELEASE SOFTWARE (fc3)
Technical Support: {URL}
Compiled Wed 13-Aug-08 15:42 by prod_rel_team
#sh inv
NAME: "chassis", DESCR: "1841 chassis"
PID: CISCO1841 , VID: V05 , SN: FHK13212639
NAME: "WIC/HWIC 0", DESCR: "WAN Interface Card - ATM (With multi line G.SHDSL module)"
PID: WIC-1SHDSL-V3 , VID: V02 , SN: FOC132041KD
View 4 Replies
View Related
Apr 29, 2011
I don't really know how this things work, but somehow i know that when you summarized few subnets into 1 in RIPv1 protocol in router, you would need this command, but how this things actually works?
View 5 Replies
View Related
Jul 23, 2012
I am looking for the command of rate-limit on a sub-interface in cisco asr 1013.
Cisco IOS Software,
IOS-XE Software (X86_64_LINUX_IOSD-ADVENTERPRISEK9-M),
Version 15.2(2)S, RELEASE SOFTWARE (fc1)
IOS XE Version: 03.06.00.S
If it is possible in Cisco asr 1013. If yes then what are the commands.
View 2 Replies
View Related
Apr 4, 2013
I am using cisco packet tracer to configure the hsrp on 3560 (c3560-advipservicesk9-mz.122-37.SE1.bin) but the standby ip Command is not available on the interface the problem in that IOS or in config
View 1 Replies
View Related
Aug 13, 2012
what happens internally when no shut command is given on the interface of router.The router interface goes up. How? What happen internally on the interface of the router?
View 8 Replies
View Related
Feb 5, 2013
We have an issue with ACS server 5.1.0.44.X. We want make a one user with few commands: show ip route static-table(deny other show commands)configure terminal, terminal length 0 ip route (with all possible arguments). All works fine except ip route command, when i try to type it I see - "This command is not authorized".
View 1 Replies
View Related
Mar 4, 2013
I have to created command set under "Policy Elements>Authorization and Permissions>Device Administration" for limited access user in ACS 5.3. Like i triyed to give them permission to only few show commands. I have set user priviledge 1, 7, 10 however either of the priviledge level user was able to run those commands. I works like the shell priviledge level.
View 1 Replies
View Related
Mar 10, 2013
After logging in to the ACS, what is the command to launch the GUI on a Cisco ACS 5.x.
View 1 Replies
View Related
Nov 26, 2012
I'm trying to set up a command set in Cisco ACS 5.3, I can't get i to work no mather who I try What I'm trying to accomplish is that some users, say Bob can run every priv. level 1 command + show run, or just to specify which commands Bob will be able to run, whatever is easiest to set up.
In my switch I have the commands:
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization config-commands
aaa authorization commands 1 default group tacacs+
aaa authorization commands 15 default group tacacs+ <--- tried diffrent apporaches whith priv level..
(and specied a tacacs server)
is the "default" under "aaa authorization commands 1x default group tacacs+" the name of the command set?
In the ACS I have specied a Authorization group and binded it to the command set, should the user have priv 15 for this to work or priv 1?(I have also specied a user and an identity group and specied ip ranges under "Network Devices and AAA Clients")
View 2 Replies
View Related
Jan 15, 2012
I have a problem with the ACS 5.2 configuration: I am trying to use the AAA authorization to centralize privileges and commands but only the privilege level is sent to router, the command set aren't sent.
The test cenary is this:
ACS 5.2Router 2900 family IOS 15.0
The ACS is configured with:
Shell Profiles (to match with a privilege level), Command Sets (with the command list), Service Selection Rules (to set to one service) and Authorization (to assign one shell profile and one command set).
The router is configured with the follows commands:
[code]....
View 4 Replies
View Related
Jan 7, 2012
I want write comment for command when i config switch .i want when use show running display comment .
View 1 Replies
View Related
Apr 15, 2012
12 users, 3 servers, 5 smartphones/tables on the WiFi (existing AP), future VPN server (maybe 5 simultaneous inbound VPN connections at the most with at least one client using a Mac), Cisco Gigabit small business switch.Internet access, VPN connectivity, and firewall (reporting, close/open ports for custom applications as needed)I was originally going to select an ASA5505-50 user device for the above client. The device is highly regarded on the Internet, offers a command line interface, priced right for the budget and should perform all duties required by the client.However, the addition of the RV180W to the Cisco product line has me questioning my choice.
1)Does the RV180W offer a command-line interface?
2)Is the RV180W limited in the number of users it can support without having to purchase additional user licenses?
3)How are firmware/software upgrades handled with the RV180W?
4)What will the client be giving up if they choose the RV180W vs. the ASA5505?
View 1 Replies
View Related
May 26, 2011
is command accounting for Radius supported on ACS 5.2 ? provided vendor's radius implementation supports this capability.
View 1 Replies
View Related
Feb 3, 2013
As advised by Bug Toolkit for bug # CSCub82913: "Workaround: adflush resolves the issue temporarily". But I can't find that command in the console or in the documentation.
View 2 Replies
View Related
Oct 3, 2012
I have ACS 5.1, I have created a user with privilege 15. I need to allow a single command by command set. I have configured command set. in command set setting i have unchecked "Permit any command that is not in the table below"
and added command as below.
Grant Command Argument
Permit clear counters
its allowing me to run clear counters, good is its not allowing to show run and configuration t commands. And problem is i can run reload command also even show interface commands.I just want to allow clear counters command only.
View 2 Replies
View Related
Aug 24, 2012
I have a cisco air lap 1522 but i have problem with it! I cant use config command in cli ? And i cant assign ip address to ap.
View 19 Replies
View Related
Sep 24, 2012
I am having ACS 5.2. I have to configure a user which would have privilege 7 access and addition to this, a user can run "clear counters" command.how to configure cammand set for "clear counters"?Can i run clear counters by privilege 7?
View 2 Replies
View Related
