Cisco VPN :: 5520 Configure Intra Interface Command To Enable Connectivity Between Remote Clients
Feb 3, 2013
I'm working with AnyConnect for the first time (my prior experience is with IPSec client) and I have multiple remote users who connect to a 5520 via AnyConnect client; they need to print to each others' shared printers but currently have no connectivity between each other.
Can I configure the 'intra-interface' command to enable connectivity between remote clients, or is there more that needs to be done to enable this, presuming that it can be done at all?
View 3 Replies
ADVERTISEMENT
Jun 30, 2011
If you have a headsite with multiple EZVPN clients (PIX 501 & 515) connected in a star configuration can you have one remote site connect to another remote site using the intra-interface command and modifying the encryption domain on the EZVPN Server?
View 3 Replies
View Related
Oct 24, 2012
I have an ASA 5520 8.2(3) and allowing my remote client-to-site-vpn clients to access resources directly connected to my ASA on separate lower security interfaces (not the outside) besides just clients on my internal networks. Someone mentioned to me configuring 'VPN on a stick' however from what I've read this seems to be only applicable when it comes to split-tunneling back out the outside interface (could be off on that). Is this possible on other lower security interfaces as well, and if so what would a mock config that accomplishes that look like (acl's, nat, etc)? Also, if I want internal users to be able to connect to these remote clients once they are active, are there any nat statements necessary (such as nonatting them) or are the vpn clients just seen as internal clients from the rest of the internal network's standpoint by default?
View 5 Replies
View Related
Jul 6, 2011
I had insatalled the ACS 5.2 on Vmware . As per my requirement i need to configure a user to restricted privilege so that he should be able to execute only the below commands on the switch .
-Show ver
-Show interfaces
-Show ip Interface Brief
-Configure terminal
-Interface <interface name >
-Shutdown
-No shutdown
The users should not be authorized to execute any other commands than above listed one .After the configuration i was not able to restrict the config mode commands . Once the user is authoized for Configure terminal access he will have full access on the device. How to configure the command set only to allow interface access and he should be able to apply Shutdown and No shutdown command .
View 6 Replies
View Related
May 29, 2011
Recently, I deployed ASA 5520 as our company firewall, everything was working fine except two main problem I still can not resolve them after I did a lot of research.
1. DNS rewriting - The internal user can not access the DMZ or internal server by put in the domain or external ip address. such as [URL] will resolve our wan ip address 210.0.0.83 ( internal ip address is 192.168.1.21 ).I used static (inside,Outside) tcp 210.0.0.83 https 192.168.1.21 https netmask 255.255.255.255 dns, but it will not work. We have our internal DNS server, but don't want to just add the domain as a record. Is there anyway to get the internal user to access Internal server and DMZ server through the public domain?
2. We also have an internal multiple subnet, another router was conneting to ASA firewall inside interface and using ip address 192.168.1.223, another subnet 10.1.15.16/28 is behind the this router, for the users in subnet 192.168.1.0/24, they connect firewall inside interface directly.I added an static route and intra-interface permit route inside 10.1.15.16 255.255.255.240 192.168.1.223 1same-security-traffic permit intra-interface I also added access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 10.1.15.16 255.255.255.240access-list inside_nat0_outbound extended permit ip 10.1.15.16 255.255.255.240 192.168.1.0 255.255.255.0nat (inside) 0 access-list inside_nat0_outbound The internal users on 192.168.1.0/24 can ping 10.1.15.18 but can not telnet to 10.1.15.18 22. If I set 192.168.1.223 as one of the workstation on 192.168.1.0/24 default gateway, it can telnet to 10.1.15.18 22 without any problem.
View 2 Replies
View Related
Jan 22, 2013
I am trying to configure Remote Access VPN in our Cicco ASA 5520 firewall through SSL VPN wizard. I tried to configure Anyconnect VPN client option, but after entering user/pass it gives error "An error was received from the secure gateway in response to the VPN negotiation request. Please contact your network administrator. The following message was received from the remote VPN device: No assigned address"
As looking online there is no easy step-by-step option for same. I want to provide Remote Access VPN to some of our user abroad who should have access to few server applications and no internet access.
View 8 Replies
View Related
Dec 13, 2011
Not sure if my subject is a good decription of the problem or not.
I have an ASA 5520 at my home office and a SonicWALL NSA2400 at my remote office. The remote office has dual internet connections and I wanted to create two seperate VPNs between the devices using each internet connection on the SonicWALL.
I know how to configure this on the SonicWALL, the problem is on the ASA 5520
OK Basic network config
Main Office
ASA Public IP 1.1.1.1
ASA Internal network 192.168.1.0 (VPN source)
Remote office
Public IP 1 2.2.2.2
Public IP 2 3.3.3.3
Iternal network 192.168.2.0 (VPN destination on ASA)
If I have a VPN from the main ASA to either one of the SonicWALL's public IPs everything works fine
If I create 2 VPN tounels from the main ASA, 1 to each public IP on the SonicWALL, the VPN shows as up but no traffic flows.
View 1 Replies
View Related
Apr 16, 2012
i have cisco ASA5520 and i have a remote access vpn .I want to configure logging for this remote access vpn.
i want the time user connected .how log it is connected .If any error while connecting ?
View 4 Replies
View Related
Aug 31, 2006
I want to configure a MAC address on my asa 5520 interface.I ask you if exist a private MAC address range?
View 5 Replies
View Related
Nov 24, 2012
We already have a subnet defined to inside interface and is in produciton. the default gateway is this interface ip. In that setup now I have to add one more subnet and as the first subnet is been defined in ASA indside interface, I have to assign secondary Ip to the inside interface so that new subnet users can easily reach here and go outside.
View 1 Replies
View Related
Jun 4, 2013
Our ASA 5510 was configured with a public interface, a DMZ interface, and a private interface. I have a remote access VPN using AnyConnect client and LDAP authentication for Active Directory. We are changing ISP (groan!), which means all new public IP addresses. The new circuit is installed, so I have a second public interface (same security level as the first public interface, wholly different IP address range) enabled on the ASA. I hope to transition whatever I can, which means get the VPN access through either public interface. Can I just enable client access on the second public interface at the Anyconnect Connection Profiles tab in ASDM? That seems too simple. Can they share the one address pool?
View 1 Replies
View Related
Aug 12, 2012
I am adding a second external connection to an existing system on an ASA 5510 with ASA V8.2 and ASDM 6.4. I added the new WAN using an other interface (newwan).
The intention is to route most internet traffic over the new route/interface (newwan) but keep our existing VPNs using the former interface (outside).
I used the ASDM GUI to make the changes and most of it works.ie. The default route goes via (newwan). Outgoing VPNs of a site to site nature use the previous route via (outside) as they now have static routes to achieve this.
The only problem is that incomming Remote Access Anyconnect VPNs are not working. I set the default static route to use the new interface (newwan) and the default tunneled route to be via (outside) but this is the point is goes wrong....
I can no longer ping the outside IP address from an external location. It seems the outside interface does not send traffic back to the - outside interface (or at least that's where I think the problem lies). How do I force replies to the incomming VPN remote traffic from unknown IPs to go back out on the outside interface?
The only change I need to make to get everything working on the outside interface again is to make the Default Static route use the outside interface. Which puts all the internet traffic back on the original (outside) connection.
View 6 Replies
View Related
Oct 16, 2011
I have a asa 5520 with an outside and backup interface. I am trying to configure two static nat statements from the inside to the outside and backup interface. Here is what I have configured so far.
object network obj-10.1.1.254
host 10.1.1.254
object network obj-10.1.1.254
nat (inside,outside) static 172.25.10.3
I want to also use nat (inside,backup) static 172.25.10.3
View 3 Replies
View Related
Nov 5, 2012
We currently have an ASA 5520 communicating with 10 ASA 5510's, all on static outside addresses. I was asked to add 5 additional 5510's on dynamic address. All worked well in testing until it was decided that some of the dynamic clients needed to talk to each other.
My testing shows packets just dying in the 5520.
View 1 Replies
View Related
Sep 12, 2012
We have two ASA 5500 series Firewalls running 8.4(1). One in New York, another in Atlanta.They are configured identically for simple IPSecV1 remote access for clients. Authentication is performed by an Radius server local to each site.
There are multiple IPSec Site-to-Site tunnels on these ASA's as well but those are not affected by the issues we're having.First, let me start with the famous last words, NOTHING WAS CHANGED.
All of a sudden, we were getting reports of remote users to the Atlanta ASA timing out when trying to bring up the tunnel. They would get prompted for their ID/Password, then nothing until it times out.Sames users going to the NY ASA are fine.After extensive troubleshooting, here is what I've discovered. Remote clients will authenticate fine to the Atlanta Firewall ONLY IF THEY ARE USING A WIRED CONNECTION.
If they are using the wireless adapter for their client machine, they will get stuck trying to login to Atlanta.These same clients will get into the New York ASA with no problems using wired or wireless connections.Windows 7 clients use the Shrewsoft VPN client and Mac clients use the Cisco VPN client. They BOTH BEHAVE the same way and fail to connect to the Atlanta ASA if they use their wireless adapter to initiate the connection.
Using myself as an example.
1. On my home Win 7 laptop using wireless, I can connect to the NY ASA with no issues.
2. The same creditials USED to work for Atlanta as well but have now stopped working. I get stuck until it times out.
3. I run a wire from my laptop to the FiOS router, then try again using the same credentials to Atlanta and I get RIGHT IN.
This makes absolutely no sense to me. Why would the far end of the cloud care if I have a wired or wireless network adapter? I should just be an IP address right? Again, this is beyond my scope of knowledge.We've rebuilt and moved the Radius server to another host in Atlanta in our attempts to troubleshoot to no avail. We've also rebooted the Atlanta Firewall and nothing changed.
We've tried all sorts of remote client combinations. Wireless Internet access points from different carriers (Clear, Verizon, Sprint) all exhibit the same behavior. Once I plug the laptops into a wired connection, BAM, they work connecting to Atlanta. The New York ASA is fine for wired and wireless connections. Same with some other remote office locations that we have.
Below I've detailed the syslog sequence on the Atlanta ASA for both a working wired remote connection and a failed wireless connection. At first we thought the AAA/Radius server was rejecting us but is shows the same reject message for the working connection. Again, both MAC and Windows clients show the same sequence.Where the connection fails is the "IKE Phase 1" process.
-------------------------------------------------------------------------------------------------------------------------
WORKING CONNECTION
-------------------------------------------------------------------------------------------------------------------------
%ASA-6-713172: Automatic NAT Detection Status: Remote end is|is not behind a NAT device This end is|is not behind a NAT device
NAT-Traversal auto-detected NAT.
%ASA-6-113004: AAA user aaa_type Successful: server = server_IP_address, User = user
%ASA-6-113005: AAA user authentication Rejected: reason = string: server = server_IP_address, User = user
[code]...
View 1 Replies
View Related
Mar 11, 2013
Would like to check out is it possible binding Cisco secure ACS 5.x to support router/switch ios feature view - superview and parser command
Busines objective is assigning administrative roles, with different role based CLI access, using ACS5.X as backend server. a. Admin (allow all) b. network monitor (privlege # 7, enable view that can doing various show command and configure) c. support (privlege #1, read only)
View 2 Replies
View Related
Mar 18, 2013
For WLC 5508 software version 7.0.235.0, which command is needed to get the WLC send syslog messages everytime a wireless client associate and desassociate?
View 2 Replies
View Related
Nov 5, 2011
provide a sample configuration to use Cisco Secure ACS 4.2 to enable command authorization using TACACS.
View 8 Replies
View Related
Oct 19, 2011
I want internet for the clients behind the ASA. When i made an entry like:
object network as-us-db11_internet
nat (inside,outside) dynamic nat_usa_pool_72
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
then have the computer internet but the Client vpn connection wont work. i can not connect to the computer over vpn. but vpn connection worked.
View 1 Replies
View Related
Sep 28, 2011
We would like to enable our HelpDesk and Network team the ability to connect to Laptops using our ASA 5510 VPN device using Secure VNC application. Not sure if this is possible or how to enable this option.
View 5 Replies
View Related
May 4, 2012
I am wondering if it has its own DHCP router and if theres a command to enable it?Also Random side question. it hands out ip addresses to other devices (the 2950 im using infront of a router) but when I hook up another switch to this switch it doesnt initialize the port or try to connect? why.
View 1 Replies
View Related
Jan 27, 2013
We have an office with about 10 PCs, and several other network devices (smartphones, printers, etc). Some PCs and printers are wired, some are not. About two weeks ago, some (6) of the wireless devices lost connectivity. Since then, some (4) of the devices have also recovered normal connectivity.
As of right now, there are two computers, a laptop and a desktop, that cannot use the wireless network. They see the wireless network, connect to it, receive an IP via DHCP properly, have correct DNS servers listed in ipconfig, but they can't ping the router, use the intranet, or internet.
View 1 Replies
View Related
Nov 4, 2012
I have an RV220W running firmware 1.0.4.17. I have a couple of wireless laptop users that connect to the wireless without problems, but frequently cannot access the Internet. They can always access local network resources, but for some reason when laptops are first powered up or are idle for a prolonged period of time, Internet access is lost. Wired clients never experience this problem and always maintain local network and Internet connectivity.
To get the laptops to access the Internet over wireless, we have to run a TRACERT command from the command prompt to a public IP address, and then all Internet access is restored.
View 2 Replies
View Related
Dec 26, 2011
You have a Cisco ASA 5520 where clients connect using Cisco Anyconnect SSL VPN, say the URL is connect.whatever.org. You would like for when a user enters either [URL] or just connect.whatever.org into their web browser that it automatically puts the required url...
View 1 Replies
View Related
May 16, 2013
We have a catalyst 2950 switch running:
IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA6, RELEASE SOFTWARE (fc1)
This release doesnt have the snmp-server enable traps errdisable command.
Where to look on the cisco site for the next available release for me that would have this command in place?
View 2 Replies
View Related
Mar 30, 2013
I've some strange problems with multiple ASA (NEM) VPN remote clients (v8.4.5). On the HQ I've an ASA5510 (v8.4.5) with multiple NEM's connected to it. The group policy used on the HQ is configured for split tunneling. Now here's the problem;
The remote ASA (NEM) constructs easily a VPN connection to the main location; it seems that everything works well. Traffic through most of the tunneled networks works perfectly. Traffic to certain subnets or hosts brings me into trouble, there is no traffic flowing through the tunnel at all!
When using the command "show crypto ipsec sa | i caps|ident|spi” I can see all of the tunneled subnets. The subnets that works perfecly gives me the correct "local and remote ident" output. The subnets with problems gives me wrong values in the "remote ident". The remote ident should be the IP address of the inside LAN (of the remote NEM) and not the IP address of the ouside interface (of the remote NEM). How is this posible?
Here's is the crypto ipsec sa output:
Result of the command: "show crypto ipsec sa | i caps|ident|spi"
local ident (addr/mask/prot/port): (10.200.60.0/255.255.255.0/0/0) <-- this is the good subnet of the inside interface (NEM)
remote ident (addr/mask/prot/port): (10.100.2.2/255.255.255.255/0/0) <-- this is the good subnet (HQ)
#pkts encaps: 54712, #pkts encrypt: 54712, #pkts digest: 54712
#pkts decaps: 31893, #pkts decrypt: 31893, #pkts verify: 31893
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
current outbound spi: A4FA947A
[code]....
View 1 Replies
View Related
Aug 6, 2010
As I continue to have various issues with my revision A version of the DIR-825, does an updated firmware is in the works? Or has revision A been DE-supported by Dlink?
I'm still having issues with: Share port printer no longer being recognized/usable until router rebootedLoss/overload of router which causes all clients (wired and wireless) to loss connectivity Router rebooting itself periodically
View 4 Replies
View Related
Dec 12, 2012
I have 2 site here:
site A
Cisco 891
external IP: 195.xxx.yyy.zzz
VPN Gateway for Remote users
[Code]....
View 1 Replies
View Related
Aug 9, 2011
I am using Cisco 2911 router , i configured remote client in that . i need to provide the static ip to the remote users instead of providing from the dhcp pool. is it possible? if it is how we can do that.
View 5 Replies
View Related
Jul 9, 2012
Tried setting up a Shape Policy and it states its invalid. Worked fine on my 5520, just curious to know why its coming as invalid now
ciscoasa(config-pmap-c)# shape
^
ERROR: % Invalid input detected at '^' marker.
ciscoasa(config-pmap-c)# shape ?
ERROR: % Unrecognized command
View 11 Replies
View Related
Jan 23, 2012
So, I made the fatal mistake while consoled in to do a "Show Run". Now, it is just stuck in that cycle. I tried the usual "Ctrl+Shift+6" command, and even the "Ctrl+6" with no success.
View 5 Replies
View Related
Dec 24, 2012
We are trying to manage our Cisco ASA 5520 (8.2.5) SSL clients through Active Directory(ldap).
Currently the SSL VPN tunnel is up and all users are able to connect being authenticated by AD. but Group-policy to AD groups are not working. all the domain users are able to go to all the group policies .
I need to give access only to their respective Group policy in ASA. Following are the available groups and GP.
Code...
View 3 Replies
View Related
Feb 8, 2011
I have setup an AnyConnect Connection Profile on my ASA 5520.
We have some remote support software which the helpdesk use to connect to PC's remotley and torubleshoot.
I cannot connect to this software using the assigned IP address of the client even though it works fine with our old Nortel VPN.
If I hit the IP address the packet gets all the way to the ASA and seems to disappear.
I have setup an IP v4 access list on the connection profile which allows any/any access b ut still no joy.
View 1 Replies
View Related
