I am wondering if it has its own DHCP router and if theres a command to enable it?Also Random side question. it hands out ip addresses to other devices (the 2950 im using infront of a router) but when I hook up another switch to this switch it doesnt initialize the port or try to connect? why.
View 1 RepliesWe have a catalyst 2950 switch running:
IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA6, RELEASE SOFTWARE (fc1)
This release doesnt have the snmp-server enable traps errdisable command.
Where to look on the cisco site for the next available release for me that would have this command in place?
With out using any server, will DHCP be configured in cisco 2950/2960 switch?I man cisco it self should work as a dhcp server also.
View 10 Replies View RelatedCan a layer 2 cisco 2950 switch be used as a dhcp server with it's own address pool.
View 3 Replies View RelatedHave a client wanting to hand out public ip addresses to all clients from a PFSense Firewall terminating the internet connection.
How do I allow the Cisco Switches currently in place, configured with private ip addresses in the 10.10.x.x ranges and Vlans, where the main 3550 layer 3 has defined dhcp scopes for each vlan, to relay dhcp requests from all vlans to the PFSense firewall?
I assume I would take off the currently defined dhcp scopes for the vlans and configure each vlan/switch with the ip helper address and specify the PFSense firewall and that Nat would have to be disabled onthe firewall?
i am having 2950 switch. Now i login through telnet but as per the company standard i have to login through ssh. Is there any possible to enable the SSH in 2950. Any IOS supporting this operation.
flash:/c2950-i6q4l2-mz.121-19.EA1c.bin
I'm having an issue with port-security on a cisco 2950 switch. The port-security is setup to user sticky mac-addresses and was working just fine. Recently when a computer was changed out and I needed to clear the security on the port it wouldn't let me.I would type clear port-security sticky int fa0/## and it would give me an error. The error would be that the sticky command doesn't exist.So I went back and type clear port-security ? and the only option was dynamic. Even if I try to take the port security off the switch it wont let me, it never shows the option for sticky.If I change the maximum number of mac-addresses allow the computer will work, but I can never clear the old addresses out.
View 3 Replies View RelatedHow do you enable multicast traffic on 2900 series switches?
View 7 Replies View RelatedStumped again with my Catalyst 2950. Everything is working perfectly with wan/dhcp/router on fa 0/1 with all ports assigned to vlan1. All devices plugged in connect to the router correctly with ip's being assigned via dhcp.Instead of hooking up by console port I want to be able to SSH or telnet in to the switch using any port while still maintaining the above functionallity. Is it possible to assign a dhcp assigned ip address to vlan 2 and have vlan1 and 2 bridged? Or is there a better way of doing this ?
View 3 Replies View RelatedI'm trying to configure my C3550 with fast ethernet port 0/48 assigned to vlan 2 in static access mode and SVI vlan 2 configured as dhcp client.
But I see command ip address dhcp is not available on interface vlan 2:
Cat3550(config-if)#ip ad
Cat3550(config-if)#ip address ?
A.B.C.D IP address
Cat3550(config-if)#ip address
Could it be a problem related to the version running on the equipment (see below the output of sh version command not sure of what EA1 stands for)? I read here [URL] that this command was introduced in version 12.1(2)T
If it is a version problem is there any possibility to download upgraded version for free?
Cat3550>sh ve
Cisco Internetwork Operating System Software
IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(20)EA1, RELEASE
[Code].....
In my organization we have several 2950T that conected each other. We have 4 floor with each floor have 1 sw except 4th flr have 3 sw.
Main server, apps, db ( 15 units) connected to core sw at 4th flr. Currently the problem is others devices can't connected to the server at core sw. Test ping and the network to core sw is intermittent problem. When ping 100 times only 30 reply. After 10 minutes the connection restored. Ping 100 times successful. It will not having problem again until the next day. This already happen 3 days. Any command for me to use to check if port or the switch having problem? Any log i can collect
I am trying to find a command for dhcp snooping rate-limiting on a CatOS. The PFC card is PFC. PFC3B is said to support that command. But there seems no this command.
-6k> (enable) sh ver
WS-C6509-E Software, Version NmpSW: 8.4(5)
Copyright (c) 1995-2005 by Cisco Systems
NMP S/W compiled on Aug 3 2005, 13:26:46
[Code] ......
Up time is 1183 days, 1 hour, 41 minutes
can you enable dhcp service on a 3560 switch.
View 3 Replies View RelatedI have a Cisco 2951 Router and I am trying to set it up to use DHCP and for security purposes I need to use the "IP Access-Group in" command. The DHCP will not work when I have this command on the interface that I need to run it through, DHCP works fine when I do not have the "IP Access-Group in" command in the configuration. When I check the log after the failed DHCP attempt it shows up as denied, as if it's being blocked. The IOS I have is c2951-UNIVERSALK9-m 15.0 (1) M3. Conf Reg 0x2102.
View 6 Replies View RelatedSo far we add any router in the existing network simply by disabling DHCP server, and adding LAN ip for that. We don't add WAN detail at all in the additional routers. And plug one cable from main network to the LAN port of the additional routers.So we basically use that additional routers only as a access point for WIFI.But what I wonder is if it's possible for me to use the additional routers with the same feature as of the main routers i.e. Enabling DHCP server so that it too can give its own DHCP ip address.
View 2 Replies View RelatedI get the following message when appling "DHCPD ENABLE INSIDE"
DHCP: Interface 'INSIDE' is currently configured as CLIENT and cannot be changed to a SERVER by a SERVER feature
This is an ASA 5505 Running 8.2.
I came across an interesting issue and thought I would see if anyone else has encountered it before contacting TAC.I have two Cisco Catalyst WS-4510R-E switches with a single Supervisor V module in each chassis. Both Sup cards are now running 12.2(54) SG1; ipbasek9 firmware; yes, I plan to move both switches to 15 code but that's another story. Anyways, prior to the upgrade the one switch was running 12.2 (33) code; I suspect the code was never upgraded; running ipbase non - K9 code. The other switch was running 12.2(44) with K9 prior to upgrade to 12.2(54).
View 2 Replies View RelatedI have two Cisco Catalyst WS-4510R-E switches with a single Supervisor V module in each chassis. Both Sup cards are now running 12.2(54) SG1; ipbasek9 firmware; yes, I plan to move both switches to 15 code but that's another story. Anyways, prior to the upgrade the one switch was running 12.2 (33) code; I suspect the code was never upgraded; running ipbase non - K9 code. The other switch was running 12.2(44) with K9 prior to upgrade to 12.2(54). With the background set, one switch reports the following:SwitchA (config)#r?radius-server redundancy regexp represourc rmon route-map router.
View 4 Replies View RelatedI've a Cisco 1941W router which is DHCP server for data-VLANs and uses ip-helper for voice-VLANs. [code] I don't know why I can't have IP from wireless voice VLAN whereas it is OK and wired voice VLAN and conf is the same!
View 4 Replies View RelatedIs it possible to configure an 881 router to act as a DHCP server to 4 VLAN's each with a different scopes all through a single ethernet interface?
View 2 Replies View RelatedI have customer who has as Core Switch one Cisco Catalyst 3750 with the IOS c3750-ipbase-mz.122-35.SE5.I know that this image support DHCP Server configuration, but I like to implementate new vlans (approx 15) and I want to know if this switch support 15 DHCP Servers.
View 3 Replies View RelatedI used to use a CentOS self-made server for intranet for my little office, but I bouth few days ago a Cisco 861 router to replace the linux box.
1. I have 2 public IP classes from my ISP. 1 class is limitted to 80mbit upload, the other to 30mbit upload. So I need some sort of DNAT to be able to know exactly which intranet computer uses big internet and which one limitted internet.
2. I need DHCP server and with static IP addresses (one computer must always have the same IP address, etc).. i have my needs for this.
3. Also I need external access to some servers inside (web, ftp, etc) [code]
So far so good, all looks simple and I can achieve this in 2 hours on a centos linux box (correct routes, ip forwarding enabled and few iptables rules for NAT/SNAT/DNAT).
But on this brand new Centos router well, i'm not even successful in pinging the outside world, nor the inside world I'm tired of reading the forums, the documentation..i want (at first) a simple scenario: vlan+dhcp, fa4 with 1 public ip address and ACCESS to the real world. I wasn't able to achieve not even that much. [code]
i'm interested if it's possible to set the NTP server via DHCP on an 2901 Router with 15.2(2) image.
i configured the interface gigabit 0/0 as dhcp client. The DHCP Server sends to me DNS, Default GW and NTP. All is working fine, but the NTP will not be configured. i tried to add an DHCP option request, but there is no NTP (42) value. [code]
is there any way to add the value NTP (42) for the DHCP request or isnt it possible?
I have trouble with a Cisco 892 Router from my Internet service provider.
Last week we switched from a virtual Router to a hardware Router. But after plugging it in our LAN Switch, the Windows DHCP Server stopped leasing IP's. I got many BAD_ADDRESS with MAC like e1:80:10:ac, e2:80:10:ac, e3:80:10:ac, e4:80:10:ac, e5:80:10:ac, ea:80:10:ac, eb:80:10:ac, ec:80:10:ac and so on.
I do not have access to the Router config, so I can not dump the config to you. We have a flat LAN, single SUB-Net(172.16.0.0/16) and no VLAN, no Spanning Tree. A Keep it Simple, Stupid(KISS) System.
A tech guy from service provider, is telling us, the error is not there fault and my switch is not correctly configured. But this is ********. For years we had a another Cisco Router from the precursor ISP and for 2 years the virtual Router from our current ISP. No trouble with my DHCP. But after plugging the new Router in, my DHCP stopped working.On the 892 is no running DHCP, but something interferences with my Windows Server 2008 R2 SP1 DHCP Server.
it's possible to let the Nexus 5548UP act as a DHCP server? (or if it will be possible in future releases)
View 3 Replies View RelatedI am running into a DHCP problem on a Cisco 891 running 15.0(1)M2. I am running DHCP on the router and want to reserve an address for a printer. I have done this hundreds of times on hundreds of routers. Per Cisco recommendation, I let the printer lease an address to see whether it uses it's "hardware-address" or "client-id". This printer uses the "hardware-address" format. The printer has leased 10.0.0.102 right off the bat. I want it at 10.0.0.50.
I have a DHCP pool, like this:
ip dhcp pool CLIENT
network 10.0.0.0 255.255.255.0
domain-name chsinc.ds
default-router 10.0.0.1
dns-server 10.0.0.1
lease 2
I create a "reservation" like so:
ip dhcp pool HP_LaserJet_Printer
host 10.0.0.50 255.255.255.0
hardware abcd.ef12.3456
Now I do a "show running-config" to see what I've put in and it looks just like above. Now we reset the network settings or change any network setting on the printer to force it to renew it's lease. What should happen and what usually happens is that the printer should request an IP, be offered 10.0.0.50, accept that IP and come up on that IP address. What is happening with this particular printer is that the printer requests a specific IP (the same IP that it had initially = 10.0.0.102), the router says OK and does not enforce the reservation. Then the router actually deletes the hardware-address config line right out of the running config. A "show running-config" shows that the reservation config now looks like this:
ip dhcp pool HP_LaserJet_Printer
host 10.0.0.50 255.255.255.0
See the logs below. Notice the ones in bold.
000226: Dec 12 17:34:01.382: DHCPD: Seeing if there is an internally specified pool class:
000227: Dec 12 17:34:01.382: DHCPD: htype 1 chaddr 101f.74b0.575c
000228: Dec 12 17:34:01.382: DHCPD: remote id 020a00000ae1e10100000001
000229: Dec 12 17:34:01.382: DHCPD: circuit id 00000000
[code]....
Is there a way to make the router enforce the reservation and not let clients just bring their own IP and actually make changes to the running-config of the router?
I seem to be having a problem with DNS name resolution after configuring my router (Cisco 3725 running IOS image: c3725-adventerprisek9-mz.124-25.bin) for handling DHCP requests.
Before I made the change, everything was working correctly; I could ping Google.com from a computer inside my LAN and would get response from one of Google's public IP's like normal.
I had a separate DHCP/DNS server running Windows Server 2008 handling the DHCP request and DNS queries.
When I made the change, I turned off the DHCP/DNS server and issued the following DHCP commands to my router:
Code...
I receive a question from a future customer about this future if its supported on " WS-C2960S-24PS-L":configuring 2 dhcp server on this swith ( 1 dhcp for voice vlan , and 1 for Data Vlan).I did some search , but i didnt find the answer .i have to advice a customer before ordering the switch.
View 2 Replies View RelatedOn a 4500 switch port , defined as access vlan 10, if the user connects his own dhcp server ( instead of the normal pc that should be connected ), will it cause issues with my existing network. the existing network is all static ip. In above case, will the dhcp server start looking out and assign dhcp ip's , if a user unknowingly removes his static ip and changes to obtain ip via dhcp option on the lan properties.
View 10 Replies View RelatedI'm attempting to configure a Catalyst 3560-X Switch to act as a DHCP Server. There is documentation that supports this feature. Below is my config procedure however after the completed procedue no IPs are handed out to clients. [code]
View 1 Replies View RelatedCan I configure a DHCP Servero on the Nexus 7018?
View 2 Replies View RelatedI need to buy a cheap Cisco switch with DHCP server.Can you confirm that 2960-24-S, 2960-24TC-S and 2960-48TC-S be a DHCP server?
View 3 Replies View RelatedI have a DHCP server for a subnet that has only lightweight WAP's in it. The DHCP server is running on the gateway for this subnet which is a 3750X 2 switch stack running 12.2(53r)se2.I have the following configured:
ip dhcp excluded-address 10.1.10.161 10.1.10.162
ip dhcp pool DHCP-VL20
network 10.1.10.160 255.255.255.224
domain-name mydomain.net
dns-server 10.11.11.30 10.11.11.40
default-router 10.1.10.161
ease 3
The server hands out up to 18 IP addresses and no more, with 20 devices on the subnet. Scanning the subnet with a 3rd party network management system I see the following IP's never get handed out or used:
10.1.10.161 - 162 (manually excluded)
10.1.10.167 - 168
10.1.10.171 - 176
10.1.10.178
and of course 2 IP's I have manually excluded, 11 IP's in all that wont get handed out. It should only be 2 that don't get handed out. I've double and triple checked the exclusion and thats the only one. so I run a 'sh ip dhcp pool' and see this:
Pool DHCP-VL20 :
Utilization mark (high/low) : 100 / 0
Subnet size (first/next) : 0 / 0
Total addresses : 30
[code]....
[edit]I should also mention that "sh ip dhcp bind" does not show these randomly excluded IP's in use. They also do not show up in any arp table I can find.I have looked all over the config and I cant find where these extra 9 addresses are being excluded. how to free up these 9 seemingly random exclusions? Haven't issued a reload and I haven't deleted and rebuilt the DHCP server yet, production network.