Cisco WAN :: 3620 - Cannot Issue Ospf Neighbor Command With NBMA Interface
Jul 27, 2006
I config my E0/0 Interface with "ip ospf network non-broadcast" command, I want this interface to use uni cast to hello neighbor.
As I issue "neighbor x.x.x.x" under ospf process, it told me that: OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint networks. I am sure that there are no any typo, and show ip ospf interface e0/0 says it's been an NBMA interface, so what's wrong with this router?
IOS information:
(C3620-J1S3-M), Version 12.3(18), RELEASE SOFTWARE (fc3)
View 7 Replies
ADVERTISEMENT
May 5, 2012
We have an existing network with OSPF configured between 3750's (DR and BDR) this is working fine.But the Nexus 7k which has been configured to run OSPF, won't established the adj. It is in the same network/subnet.The MTU is 1500.
View 5 Replies
View Related
Mar 26, 2009
our backbone (6509) is connected to atm backbone (nortel passport) those are connected through giga Ethernet interface and running ospf in area 0. One week ago we lost the ip connectivity between those backbones, the interfaces were in up but the neighbor relation fail and it was kept in LOADING STATE, according we the logs the neighbor relation fail because a BAD LSA was received (error messages %OSPF-4-ERRRCV:Bad LSU adv and %OSPF-4-BADLSATYPE:Invalid lsa:Bad LSA chksum Type 5 were received during the outage)We check in cisco and this is quite normal behavior if we receive a bad LSA but the customer is asking why we have the same error message for long time and we didn't lost the neighbor relationship.
how many bad lsa we can receive before to lost the neighbor relationship.We receive two errors messages for bag lsa.. [code]
View 3 Replies
View Related
Nov 1, 2011
I just finished setting up a bundle of (2) T1's in a multilink bundle and I'm having issues with one of the T1's not wanting to join the bundle.
The router I'm using on the remote office location is a 3620 router running code c3620-i-mz.121-1c.bin
The campus router which is a 7206 is setup the same exact way with multilink 240 and like I've said, serial 0/0 is joined to the bundle just fine, so we are running off one T1 connection.
The serial interface that is not working is: serial 0/1
Here is a show-run:
interface Multilink240
ip address 172.18.xxx.xxx 255.255.255.252
ip route-cache flow
ip ospf network point-to-point
service-policy output PhonesFirst
ppp multilink
[code].....
View 3 Replies
View Related
Aug 8, 2012
I was trying to setup a Nexus (5596 running NX-OS 5.1(3)N2(1)) to use the "ip ospf name-lookup"command that I am using on IOS-based routers. Unfortunately this command does not appear to be supported on NX-OS and I cannot find a replacement.Is this another feature that's left out of NX-OS?
View 4 Replies
View Related
Jun 20, 2012
I am trying to modify the OSPF admin distance for a specific subnet under version 5.1(5) of the Nexus 7K, but this command does not appear to be available.
View 1 Replies
View Related
Feb 24, 2012
Does OSPF work between a VSS L3 MEC & an ASA Redundant Interface? Both 6509 are in VSS and a L3 MEC is formed to the ASA.Both ASA ports are a part of a L3 Redundant Interface. Please note there is only a single ASA in this topology. [code] Now, the OSPF neighboring does occur and go into the FULL state on this device, however soon enough, the state enters INIT/DROTHER state.But as soon as I disconnect the physical connection 6509(Standby) The OSPF adjacency goes into FULL mode.
View 5 Replies
View Related
Apr 27, 2011
I started studying yesterday for CCNP Route and I'm already stuck. Stupid Frame relay. Basic topology attached, 1 Hub, 2 spokes. I have EIGRP working correctly and each spoke can see all routes correctly. The Hub is on a Multipoint interface with split horizon turned off.
View 15 Replies
View Related
May 29, 2011
I've been having a problem with my cisco routers (7600s) where sub-interfaces that we create for ldp tunnels are added automatically to the main ospf process as no passive when created. In order, here is how to reproduce the issue:
- Configure ospf process as "passive-interface default"
- Configure interfaces that have to be active as "no passive-interface blah"
- ospf works as expected.
- Create new sub- interface somewhere with encapsulation on a certain vlan for xconnect.
- New sub-interface gets added as "no passive-interface" in main ospf process.
- When adding a new port-channel interface, behavior is the same.
Is that normal for cisco, should I continue removing sub-interfaces manually every time from the ospf process?
View 4 Replies
View Related
Oct 24, 2011
i'd like to configure OSPF on a Catalyst 6503 IOS 12.2.17.i habe an Gi1/9 with the ip address 192.168.97.30/24 and a VLAN 19 with the IP Address 192.168.19.0/24.I configured OSPF like this
router ospf 1
network 192.168.97.0 0.0.0.255 area 10.5.0.0
network 192.168.19.0 0.0.0.255 area 10.5.0.0
on the ospf peer is see that the adjaceny is established but i don't get the routes for the 192.168.19.0 network i checked the ip ospf interface vlan 19; i got ospf is not enabled on the interface then i tried to configure
int vlan 19
ip ospf 1 area 10.5.0.0
but it does not access ip ospf 1
View 3 Replies
View Related
Jan 15, 2011
I want to configure multilink between two Cisco 7206 routers POS interfacesafter configuring both sides.Router 1interface Multilink5 ip address. [code]. I can see both sides through show cdp, also ospf process goes to FULL stateBut traffic is not flow between interfaces, and i can not even ping router's own ip address.When i delete network statement from ospf process, i can ping router's own interface and both routers can ping each other.
View 1 Replies
View Related
Jun 29, 2012
I am getting this error on my PIX 535 with 8.0.4 code. The error is Error : OSPF/RIP cannot be enabled on failover interface, I am getting this error while trying to enable RIP on the firewall. The context is single mode and failover is enabled. When I am disabling the failover the Firewall is accepting the RIP configurations.
View 2 Replies
View Related
Nov 6, 2011
I'm currently working on a plan to migrate our 6500's over to our new 7010's. At the time of the migration I want to tighten up our OSPF design and configure OSPF for "passive-interface default" then allow only those interfaces that should have OSPF neighbors to send the hellos. The issue is that the command is not showing up under the OSPF process. What's even more interesting is that the Nexus 5.x Unicast Routing Configuration Guide shows that the "passive-interface default" command should be an option to enter.
I'm currently running version 5.1(4) (though looking to upgrade to 5.2 during my migration testing). I would rather configure the passive-interface via the routing process versus having to enter it on every interface.
View 2 Replies
View Related
Sep 22, 2011
I have 2 ASBR routers, AGFR01RTR03 and AGFR02RTR03, performing OSPF to OSPF redistribution in both ways for the same ***. They also do summarization for our private addressing scheme. It is all working just fine for that part (neighbors, summarization, redistribution).
AGDC01RTR01 --- AGDC02RTR01 (OSPF 1000 ABRs)
| |
| |
AGFR01RTR03 --- AGFR02RTR03 (OSPF 1000 / 53 ASBRs)
Let's focus on AGDC01RTR01 with a specific entry here (IP subnet is fake) :
Routing entry for 1.1.1.0/25
Known via "ospf 1000", distance 110, metric 300, type inter area
Last update from 10.2.244.76 on GigabitEthernet5/1, 1d03h ago
Routing Descriptor Blocks:
* 10.2.244.76, from 10.2.1.249, 1d03h ago, via GigabitEthernet5/1
Route metric is 300, traffic share count is 1
[code]...
View 15 Replies
View Related
Mar 14, 2011
Currently the OSPF network consist of 2 segment route via static route.One is AREA 0 and another AREA 10.Both network are seperate entity, only static route to route between 2 networks.But the static route do not provide the dynamically and flexibility, I plan to run routing between 2 networks via VLAN160 and VLAN162.
I still want to manitnace it was 2 different OSPFrouting domain.Can I run OSPF with differrent OSPF porcess ID?
View 8 Replies
View Related
Oct 21, 2012
I am using ASA 5520 Image in GNS3, when i come in Configuration Mode and try to create Tunnel through command "interface Tunnel 0", but this command doesn't exist. I need this command to create Tunnel for GRE Lab.
View 2 Replies
View Related
Jul 15, 2012
I'm trying to troubleshoot one of our site today and can't seem to issue the show dsl interface command on a 1841 router. Does the same command is used for SHDSL or am I running with an IOS bug?
#sh dsl?
% Unrecognized command
#sh ver
Cisco IOS Software, 1841 Software (C1841-BROADBAND-M), Version 12.4(15)T7, RELEASE SOFTWARE (fc3)
Technical Support: {URL}
Compiled Wed 13-Aug-08 15:42 by prod_rel_team
#sh inv
NAME: "chassis", DESCR: "1841 chassis"
PID: CISCO1841 , VID: V05 , SN: FHK13212639
NAME: "WIC/HWIC 0", DESCR: "WAN Interface Card - ATM (With multi line G.SHDSL module)"
PID: WIC-1SHDSL-V3 , VID: V02 , SN: FOC132041KD
View 4 Replies
View Related
Apr 29, 2011
I don't really know how this things work, but somehow i know that when you summarized few subnets into 1 in RIPv1 protocol in router, you would need this command, but how this things actually works?
View 5 Replies
View Related
Jul 23, 2012
I am looking for the command of rate-limit on a sub-interface in cisco asr 1013.
Cisco IOS Software,
IOS-XE Software (X86_64_LINUX_IOSD-ADVENTERPRISEK9-M),
Version 15.2(2)S, RELEASE SOFTWARE (fc1)
IOS XE Version: 03.06.00.S
If it is possible in Cisco asr 1013. If yes then what are the commands.
View 2 Replies
View Related
Jul 6, 2011
I had insatalled the ACS 5.2 on Vmware . As per my requirement i need to configure a user to restricted privilege so that he should be able to execute only the below commands on the switch .
-Show ver
-Show interfaces
-Show ip Interface Brief
-Configure terminal
-Interface <interface name >
-Shutdown
-No shutdown
The users should not be authorized to execute any other commands than above listed one .After the configuration i was not able to restrict the config mode commands . Once the user is authoized for Configure terminal access he will have full access on the device. How to configure the command set only to allow interface access and he should be able to apply Shutdown and No shutdown command .
View 6 Replies
View Related
Apr 4, 2013
I am using cisco packet tracer to configure the hsrp on 3560 (c3560-advipservicesk9-mz.122-37.SE1.bin) but the standby ip Command is not available on the interface the problem in that IOS or in config
View 1 Replies
View Related
Aug 13, 2012
what happens internally when no shut command is given on the interface of router.The router interface goes up. How? What happen internally on the interface of the router?
View 8 Replies
View Related
Apr 15, 2012
12 users, 3 servers, 5 smartphones/tables on the WiFi (existing AP), future VPN server (maybe 5 simultaneous inbound VPN connections at the most with at least one client using a Mac), Cisco Gigabit small business switch.Internet access, VPN connectivity, and firewall (reporting, close/open ports for custom applications as needed)I was originally going to select an ASA5505-50 user device for the above client. The device is highly regarded on the Internet, offers a command line interface, priced right for the budget and should perform all duties required by the client.However, the addition of the RV180W to the Cisco product line has me questioning my choice.
1)Does the RV180W offer a command-line interface?
2)Is the RV180W limited in the number of users it can support without having to purchase additional user licenses?
3)How are firmware/software upgrades handled with the RV180W?
4)What will the client be giving up if they choose the RV180W vs. the ASA5505?
View 1 Replies
View Related
Mar 9, 2011
Any Cisco command similar to Junipers monitor interface interface type / number. It's handy seeing real time interface stats. monitor interface?
View 5 Replies
View Related
Jun 26, 2012
when will be the command "default interface x/x" on the Nexus 5000 platform available? Even with latest software version (5.1.3.N2.1a) it is not possible. For Nexus7000 it's working fine with 5.2 train.Is there a feature request for it? If not here it is!!It's horrible to deconfigure many interfaces especially in N5k environments with many FEXes.
View 3 Replies
View Related
Feb 29, 2012
I want to know if WAG325N supports cisco's IOS so that i can configure it using command line interface? Is it possible?If not, how would i change ethernet interface speed setting so that it can support 100 mbps of speed. Because when i connect through LAN i'm always getting a full dulplex 10 mbps LAN connection automatically.
View 1 Replies
View Related
Aug 22, 2012
I'm probably overlooking something very simple but is there a command to show the uptime of a router interface in days,hours,minutes?
View 3 Replies
View Related
May 7, 2012
we're having an issue with the command "cts dot1x" when applied to an uplink interface. It basically kils the connection with this command is applied. Once you remove it, everything is back to normal, the platform is a cisco 3750x.
View 0 Replies
View Related
Jun 30, 2011
If you have a headsite with multiple EZVPN clients (PIX 501 & 515) connected in a star configuration can you have one remote site connect to another remote site using the intra-interface command and modifying the encryption domain on the EZVPN Server?
View 3 Replies
View Related
Oct 12, 2011
I am switching a switch connecting to the ASA5550 tomorrow. My current switch is using fiber connecting to the ASA. The new one only support copper. If I switch between fiber to copper on the ASA (change media-type command on interface) will it cause a down time? I have VPN tunnel on the ASA and don't want the session to reset.
View 2 Replies
View Related
Apr 20, 2011
I have a sitecom 3G ready wireless router but does not support the local telephone company. i would like to know how to access its modem config from a command line inorder to configure the modem commands with local company settings. Its model no is WL-326v1001
View 1 Replies
View Related
Jan 6, 2012
how to open the Linksys E4200 command line interface? Ive tried using telnet but i get this message:Could not open connection to the host, on port 23.
View 3 Replies
View Related
Aug 20, 2012
I have configured the ip telnet source-interface Loopback 0 command on a Nexus7010, but when I telnet to another device and do a show users, the ip address is of the closest interface to the device I telnet to, not the ip address of the Loopback. All interfaces are in vrf default. I am running 5.1(6) NXOS.
View 6 Replies
View Related