Cisco Routers :: RV042 Giving Out Router Certificate Instead Of Server

Nov 28, 2012

Just installed RV042 router. And it's giving out router certificate instead of server certificate so people who are trying to access our secured server are getting errors. I'm not talking about remote management. I'm talking about people trying to access our web site, which is secured, and getting an error because the RV042 is giving its own SSL certificate instead of the Server's certificate. How do we turn that off or keep it from happenning?
 
The RV042 firm version is v4.0.0.07-tm (Aug 19 2010 19:19:50)

View 5 Replies


ADVERTISEMENT

Cisco Routers :: RV042 Giving Out Certificate Instead Of Server?

Jan 28, 2013

RV042 router is giving out the outer certificate  instead of server certificate. Outlook anywhere is failing and we are receiving certificate errors for any secure site behind this firewall.  I'm not talking  about remote  management. I'm talking about people trying to access our  web site,  which is secured, and getting an error because the RV042 is  giving its  own SSL certificate instead of the Server's certificate.  Firmware Version:  1.3.13.02-tm.  I don't see any updates for that  hardware.  I do have it working on an RV042 with the same firmware at a different location.  How do we turn that off or keep it from happening?  Output from a test site Attempting to resolve the host name xxxx in DNS.The host name resolved successfully. Additional DetailsTesting TCP port 443 on host xxxx to ensure it's listening and open. The port was opened successfully. Testing the SSL certificate to make sure it's valid. The SSL certificate failed one or more certificate validation checks. Test Steps ExRCA is attempting to obtain the SSL certificate from remote server xxxx on port 443. ExRCA successfully obtained the remote SSL certificate. Additional Details Remote  Certificate Subject:

SN=California, L=Irvine, C=US, O="Cisco-Linksys,  LLC", OU=RV042, CN=68:ef:bd:b8:0f:78, Issuer: SN=California, L=Irvine,  C=US, O="Cisco-Linksys, LLC", OU=RV042, CN=68:ef:bd:b8:0f:78.Validating the certificate name. Certificate name validation failed. Tell me more about this issue and how to resolve it Additional Details Host  name xxxx doesn't match any name found on the server  certificate SN=California, L=Irvine, C=US, O="Cisco-Linksys, LLC",  OU=RV042, CN=68:ef:bd:b8:0f:78.

View 1 Replies View Related

Cisco Routers :: RV042 - DHCP Giving Out Wrong Default Gateway And DNS Server

Oct 3, 2012

I have a RV042 router. The problem that I am having with it is that the DHCP is giving out the wrong Default Gateway and DNS Server. There is no option to change the DHCP server IP on any of the settings pages on the router. I am begining to think that there might not be a way to do it.  I see that there is an option for the DNS under the DHCP page but the Public IP that is being handed out is not the one on that page. I also have 2 WAN connections hooked up as well a DSL link and a Cable link (the cable link is the primary one).
 
The following information is provided in an effort to resolve this issue:
IP of Router 10.0.0.2
IP of DHCP Server (the one that is being handed out):10.0.0.1
IP of DNS (the one that is being handed out): 10.0.0.11
 
What I want to it be.
IP of Router: 10.0.0.2
IP of DHCP 10.0.0.2
IP of DNS 10.0.0.2

View 3 Replies View Related

Cisco Routers :: RV042 Browser Certificate Errors When Logging Into Web-based Gui

Jan 2, 2012

I have set the RV042 up for QuickVPN access.  The router config recommends turning HTTPS on in the firewall when using QuickVPN.  The side effect to this is any web browser throws me certificate errors and warns me not to continue logging in to the router's config.  How do I fix this so the browser does not throw these messages?
 
Router is Linksys-branded, using latest firmware for this hardware (1.3.13.02-tm)

View 12 Replies View Related

Cisco Routers :: Rv042 Remote Management Unavailable After Certificate Export

Nov 24, 2011

i was connected to my rv042 via remote management / browser, and tried to add vpn clients. i generated a new certificate and then i clicked on export for clients. by doing this, the remote management disconnected and i cannot access the router anymore.
 
how can i get the new .pem file from remote? do i have to make somebody turn off and on the unit to get back remote access??
 
p.s.: after turning off an on i tried the same steps again: everytime i click on "export for admin" or "export for client", this kills the remote management and the unit must be hardreset. now: how do i get the newly created client certificate off that unit ?? otherwise i will have to drive 350 km just to grep that file ?!?!

View 1 Replies View Related

Cisco Routers :: WRVS4400N - Server Certificate To Get VPN Client To Work?

Dec 12, 2011

WRVS4400N Where is the Server Certificate located to get the VPN Client to work?

View 2 Replies View Related

Cisco VPN :: 3825 - VPN Client Is Giving Error And Unable To Create Certificate Enrollment Request

Feb 21, 2011

We find ourselves in a difficult situation with the Cisco VPN Client version 5.0.07.0290 where it keeps giving us an

"Error 42: Unable to create certificate enrollment request"

When we attempt to use the Online enrollment method to create and enroll a new certificate. There is no additional information in the VPN client logs where we have set 3-High for all logs. In addition, Wire shark does not show any packets sent from the machine running the client to the Cisco 3825 router which runs the Cisco CA.
 
To create and enroll a certificate we do the following:

1. Click on the Enroll button to show the Certificate Enrollment dialog
2. Select  Online
3. Select <New> for Certificate Authority
4. Enter http://192.168.120.1 as CA URL (note, 192.168.120.1 is the IP of the Cisco 3825)
5. Click Next to display the dialog where we can enter certificate details
6. Enter details in all fields except IP Address and Domain
7. Click Enroll which shows a dialog with the Error 42 ... message in it.
 
If we attempt to create a request by using the File method, all works fine, that is, the client creates a file with the enrollment request. The fact that the client does not send any messages to the Cisco CA leads us to believe that we have a problem on the client machine. However, the client does not write any information in the logs, so it is a bit hard to fix the problem. I can provide additional configuration information if required for both the client and the Cisco CA. Note that we have not modified any client configuration. Basically, we installed the client on a Windows 7 64bit machine and attempted the steps listed above.

View 2 Replies View Related

Cisco Routers :: WRVS400n - QuickVPN Server's Certificate Doesn't Exist On Local Computer

May 7, 2012

I bought a new WRVS400n recently because it had Gigabit speed, wireless n and a built in VPN server.  The device works perfect except for the Quick VPN client.  I'm a system engineer so I thought I could set it up quite easy just like any other device I configured in the past.  Painfull but it isn't like this.
 
  I set up the VPN on the WRVS4400n and generated a certificate.  I saved both the client and admin certificate to my pc, I gave them a name to easily make up the difference between both of them.  When placing the certificate in the installed QuickVPN folder, it doesn't seem to get recognised by the QuickVPN software. When I try to connect, it says 'Server's certificate doens't exist on your local computer'.  I guess the naming convention must meet some kind of format, is that correct?  If so, this should have been described in the documentation.
 
Besides that I checked if the required ports used by the VPN server are open on the public port of the device, that is the case.  So It seems I'm quite close to get it working.
 
The version of QuickVPN I used is 1.4.2.1.  The WRVS4400n has the latest firmware loaded.

View 1 Replies View Related

Cisco Routers :: RV042 Can't Ping Ip Server

Feb 6, 2012

i have setup vpn connection (client-gateway) using quick vpn ( default cisco) and third party like thegreenbow. connection is ok (established) but why from outside I can only ping to IP LAN PC  , if   I ping ip server the result is request time out(failed). I have been trying do this to 3 server ( windows server 2003 as OS).four your information I have made firewall "OFF"  on all of those servers.  the result is same, failed.

View 0 Replies View Related

Cisco Routers :: RV042 With Two Subnets For A Web Server?

Dec 21, 2011

I have a static DSL  connection and my ISP is giving me 4 static IP's. I have connected my  RV042 to the DSL modem and I have now 1 subnet at 192.168.0.0. What I  want to create is a WEB server/ Email server, but to sit on a different  subnet - 192.168.5.0. For now I have connected the server to the DMZ  port, but I am unable to to access it from WAN, only from LAN. How to configure properly the 2 subnets (192.168.0.0 and  192.168.5.0) and how to forward my static address to the server which I  which to be on the 192.168.5.0.

View 4 Replies View Related

Cisco Routers :: RV042 Can't Locate DNS Server

Dec 14, 2012

I'm trying to set up an RV042 as a gateway for our home network. I've cloned the MAC address of the cable modem attached to WAN1, and have set up WAN1 to obtain an IP automatically. The System Summary page shows under WAN Status that WAN1 has been assigned an IP address in the right range for Comcast, the provider. The default gateway address looks good, and the DNS server is, in fact, Comcast's main DNS server for this area.
 
However, when I go to System Management > Diagnostic, the router is unable to resolve basic domain names (e.g., www.cisco.com) or ping addresses outside the LAN. I can ping the router itself successfully. Attempts to access the web through the router fail on domain name look.

View 4 Replies View Related

Cisco Routers :: RV042 V3 - How To Activate Telnet Server

Jan 25, 2012

I wish to change ARP table or any else to get a WOL functionnality.
 
I found how to activate telnet server, but I don't have the right login and password.

View 1 Replies View Related

Cisco Routers :: Multiple Internal Web Server RV042

Aug 15, 2012

We have setup a new internal web server so now we have two internal web server and both or hosting sites on port 80. Currently we have port 80 forwarding to one of the web servers and users are able to hit it from the outside. 

Is there any way to configure the RV042 to route web traffic to the correct web server by using the site name or dns?  If a user puts in the address{URL}, be routed to one web server but if they put in {URL}, be routed to our second web server.   I've checked with our vendors and the both web servers applications need to run on port 80.  If we have forwarding setup on the RV042 to forward port 80 to web1 then users can't access web2 from the outside?

View 3 Replies View Related

Cisco Switching/Routing :: 3911 Router DHCP Server Not Giving IP Address

Jan 30, 2011

I have a 3911 router with a 1242 AP. The problem that I have is that when the user is trying to connect, the user get the OS Ip address 169.254.168.154 and I see that when I do the "show dot11 association" command, but when I do sh ip dhcp binding on the  router I see
 
172.19.9.141        0100.18de.74db.14       Jan 31 2011 11:14 AM    Automatic
 
The router is seeing as if the router gave the ip address to the user, but the reality the user was assigne the OS ip address 169. I did "debug ip dhcp server events" and I got the following:
 
Jan 31 11:09:06.752 EST: DHCPD: Seeing if there is an internally specified pool class:Jan 31 11:09:06.756 EST:   DHCPD: htype 1 chaddr 0100.18de.74db.14
Jan 31 11:09:06.756 EST:   DHCPD: remote id 020a00000a58218400000000Jan 31

[Code].....

View 10 Replies View Related

Cisco Routers :: Configure RV042 Dual WLan / Web And DNS Server

Aug 19, 2011

I need configuring Cisco RV042 dual wlan and port forwarding for 2 servers web and dns in LAN

View 1 Replies View Related

Cisco Routers :: RV042 Email Server Not Send Mail When Switch From Wan

Sep 28, 2011

Just installed a RV042 with dual wan connections. Would like to make the WAN 2 (new cable modem as well) the primary connection over WAN1 (DSL), however whenever I switch from WAN1 to WAN2 in Smark Link set up, our email server will not send mail out, even though nothing is blocking the connection.

View 0 Replies View Related

Cisco Routers :: No Access Information Logged For PPTP Server On RV042?

Nov 25, 2012

I have configured PPTP Server on RV042, and created 3 accounts. I am able to connect from Windows PC without any problems.
 
In the router's logging utility, there doesn't appear to be any log entries indicating either successful or failed attempts to connect to PPTP server. The only access logs I see are for access to the router's configuration utility. Is there a way to view PPTP access in the router system log?

View 4 Replies View Related

Cisco VPN :: 2911 Router / IPad - Could Not Validate Server Certificate

Jan 23, 2012

i have windows 2008 R2 as CA server. and i also have 2911 router  as remote vpn server. Everything works fine for  desktops computers and leptops. Users automatically enroll certificates on Microsoft CA server and get connected to vpn. But problem is with ipads. When i try to connect from ipad  error massage deslpays "Could not validate the server certificate"  and i also get chis error massage from router "CRYPTO-4-IKMP_BAD_MESSAGE: IKE message from x.x.x.x failed its sanity check or is malformed"
 
With ipads built in vpn client i can see the installed certificate and use it but with anyconnect client  no certificates are displayed.

View 4 Replies View Related

Mail Server Giving Different IP When Pinged At Different Times

Mar 14, 2012

When I'm pinging my mail server, it gave me different IP's at different times. As the mail server is actually owned by us, I would like to know if that is possible without the IP actually being changed by someone. This is really critical for me. I didn't mean to cross post so providing the URL of the other place where I posted..

If you'd like I may attach the screenshots for the same, but don't think that will server any purpose.

View 7 Replies View Related

Linksys Wired Router :: Cisco RV042 With Two Subnets For A Web Server?

Dec 21, 2011

I have a static DSL connection and my ISP is giving me 4 static IP's. I have connected my RV042 to the DSL modem and I have now 1 subnet at 192.168.0.0. What I want to create is a WEB server/ Email server, but to sit on a different subnet - 192.168.5.0. For now I have connected the server to the DMZ port, but I am unable to to access it from WAN, only from LAN. how to configure properly the 2 subnets (192.168.0.0 and 192.168.5.0) and how to forward my static address to the server which I which to be on the 192.168.5.0.

View 1 Replies View Related

Linksys Wired Router :: Configure Cisco RV042 To Access PPTP VPN Server?

Jun 7, 2012

how i can configure the Cisco RV042 to access PPTP VPN Server (Witopia VPn) or other vpn servers.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS Server Certificate From 3.3 To 4.2?

Mar 2, 2011

We have enabled EAP-TLS authentication for our wireless LAN end user in our network setup , And we have defined certificate on our old acs server 3.3  from a third party  CA . I want to use the same certifcate which is being used in 3.3 ,how i can copy that certficate from 3.3 and get it installed on new acs 4.2 .

View 7 Replies View Related

Cisco DPC3825 / DIR655 Routers Giving Error

Jun 20, 2012

i m trying to connect two routers a Cisco DPC3825 (r1) and DIR-655 (r2) and at the end getting the error. i have disabled the SPI firewall on r1 and connected an ethernet cable lan to lan between the two. i don't want to confuse with whatever the mess i have done previously,Tell step by step what i should do to connect these two routers.PS: in addition, the gateway ip of r1 is 192.168.0.1 with subnet mask of 255.255.254.0 and the gateway ip of r2 is 192.168.0.2 with subnet mask of 255.255.255.0. r1 has a ip range of 192.168.0.10 to 192.168.0.128 while r2 has range of 192.168.0.100 to 192.168.0.199.

View 7 Replies View Related

Use Server 2003 SMB With IAS Without A Certificate?

Nov 14, 2011

Is it possible to use Server 2003 SMB with IAS WITHOUT a certificate? So someone with a laptop could get on the WLAN with their AD credentials without me giving them a cert?

View 13 Replies View Related

Cisco Firewall :: 5510 Vpn Client Groups Configured / DHCP Server Stops Giving Network Service

Feb 20, 2013

I have a asa 5510 vpn client groups configured and connected to the internal network DHCP server stops giving network service dhcp and the network goes down.

View 6 Replies View Related

Cisco Routers :: RV042 VPN Router Keeps Rebooting

Mar 21, 2012

I have a Linksys RV042 10/100 4-Port VPN Router with Firmware Version 1.3.13.02 and l have noticed that the Router keeps rebooting on average every couple of hours.We have it setup for Load Balancing 2 ADSL Services.

View 3 Replies View Related

Cisco Routers :: Using RV042 In Series With Another Router

May 16, 2012

I have been able to put two Linksys routers in series no problem but this doesn't seem to work with an RV042.I have a number of customers that need to connect to a private email network via a router based VPN, but since VPN traffic is not filtered in the firewall, I would like to use an older Linksys router to manage the VPN(s) and have it pass data in through the filters of an RV042 on the DMZ port.I am getting stuck on the very frist part of this. Although I can connect to both the RV042 and LinkSys directly (by adjusting my subnet), I cannot ping the Linksys when it is connected through the DMZ port even if I disable the RV042 Internet port.
 
I know both the Internet and DMZ ports work on the RV042. I suspected that perhaps the RV won't pass through private IPs and tried known available pubic IPs instead of the 192.168.2.x subnet, but still no ping.What would be limiting the RV in this case? Is is possible to setup the RV to work in series with another router? Is there any other way to filter VPN traffic?

View 6 Replies View Related

Cisco Routers :: Disable SIP ALG In RV042 Router?

Mar 11, 2012

Using these routers for VoIP phones, the manufacturer says that SIP ALG must be disabled. I cannot find a setting for this.

View 1 Replies View Related

Cisco Routers :: SRP521 Giving Busy Tone On Outbound?

Dec 13, 2012

I have a 521 with 1.01.24 The fxs port is registered and inbound calls work.  When the customer picks up the phone to make a call they get a busy tone.

View 1 Replies View Related

Cisco Routers :: WAN To LAN Throughput Of RV042 Router With QoS And SPI Enable?

Feb 13, 2012

What is the WAN to LAN Throughput of RV042 router with QoS and SPI enable?
 
Will the RV042 router able to support a 60Mbps down 3Mbps up Internet connection with QoS enable and SPI enable without slowing down the connection?

View 1 Replies View Related

Cisco VPN :: UC520 SSL VPN Failed To Validate Server Certificate

May 17, 2012

I've configured in an UC520 a SSL VPN.I can access properly and I can see the labels, but I only can access urls which are http, not https:I can access the default ip of the uc520 (192.168.1.10) but When I try to get access to a secure url I get the msg: Failed to validate server certificate I'm trying to access a Cisco Digital Media Manager, whose url is URL Does the certificate of both hardware has to be the same?

View 7 Replies View Related

Cisco :: PEAP And ACS5 Server Side Certificate

Feb 9, 2013

I'm in the process of setting up PEAP with ACS 5. From understanding the certificate that I generate is a server side certificate used between ACS and CA authority. However, according to the Cisco document that I'm using it sounds like I still have to install a certificate on the wireless clients that validate the server certificate. Is there a process to push this cert out via AD or do I need to manually install it and if I wanted can I get away with out checking the validate the server certificate on the wireless client?

View 4 Replies View Related

Linksys Wired Router :: Static Route To Access TMG Internal Network Through RV042 Pptp Server?

Mar 20, 2012

Currently i am having a scenario where i have setup RV042 and which is connected to Microsoft Forefront 2010. PPTP works fine only on rv042 subnet but i am not able to access the "internal" network of TMG.RV042 (172.16.1.1) ---> TMG [external] (172.16.1.2) ---> TMG [internal] (192.168.1.1) Is there any way through static route to access the TMG internal network through RV042 pptp server?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved