Cisco Routers :: RV042 Can't Ping Ip Server

Feb 6, 2012

i have setup vpn connection (client-gateway) using quick vpn ( default cisco) and third party like thegreenbow. connection is ok (established) but why from outside I can only ping to IP LAN PC  , if   I ping ip server the result is request time out(failed). I have been trying do this to 3 server ( windows server 2003 as OS).four your information I have made firewall "OFF"  on all of those servers.  the result is same, failed.

View 0 Replies


ADVERTISEMENT

Cisco Routers :: ICMP (ping) Protocol Binding With The RV042?

Aug 7, 2011

Is it possible to use protocol binding to route pings only over the WAN1 connection, even if WAN1 fails? It seems like the protocol binding feature of the Linksys RV042 is ignored once WAN1 fails.  I would like to use a ping from the LAN to an external IP to verify if the WAN1 connection is down, or is up and then use that information to power up, or power down a secondary communications system (WAN2).  However, if the protocol binding is ignored when WAN1 fails, then I will not be able to use the ping to establish the state of WAN1 connection. Addtionally, is it possible to use protocol binding to only route pings and allow all other traffic to use either WAN connection? I have seen these feautures on a different brand of router that failsover to a cell connection, but it is not a true dual WAN router. It would be nice if the RV042 would allow this kind of control. Are there any other dual WAN routers out there that have this kind of protocol binding feature?

View 1 Replies View Related

Cisco Routers :: RV042 Don't Answer Ping Through A Static Route

Oct 25, 2011

I defined a static route: 192.168.0.0 / 255.255.255.0 / 192.168.1.201 (gateway), I can connect from 192.168.1.0 to 192.168.0.0 but we cannot ping in this local network. We have a CISCO 18000 as a VPN IP configured between this two local network.

View 1 Replies View Related

Cisco Routers :: Allow PING On RV042 From WAN Side Only From Specific IP Address?

Nov 27, 2012

I would like to allow PING on RV042 from WAN side only from specific IP address, but when I set the rule, RV042 does not respond on WAN side, because Block WAN Request is Enabled.BUT! When I disable "Block WAN Requests", now any IP can ping my router from WAN side. Although I set access rule to Deny Ping from WAN side to anyone, it still responds.

View 1 Replies View Related

Cisco Routers :: Quickvpn / Client To Gateway Vpn Rv042 Can Only Ping Router?

Jan 27, 2012

I am setting up remote access using an RV042 router.  Using quickvpn or a client-to gateway vpn and shrewsoft client,  I can only access/ping the LAN side of the remote router and one machine on the remote network.  The PPTP server and native Windows 7 connection provide access to all machines on the remote network.I have 2 possible reasons for this and would like to find the real reason:
 
1) The remote RV042 is behind another router, and that router restricts access other than the PPTP traffic.

2)  The VPN tunnels other than PPTP only allow access to the remote LAN side of the router and remote machines that have the remote router defined as their gateway in the IP configuration.

View 2 Replies View Related

Cisco Routers :: ASA5520 And RV042 - Tunnel Get Connected But No Ping / No Traffic Between Both End Network

Sep 13, 2011

I configured ASA5520 and RV042 for site-to-site IPSec VPN tunnel.Tunnel get connected, but no ping, no traffic between both end network.
 
Network:
=======
 192.168.113.0/24----------192.168.113.6 -ASA--------public, static IP address------Cisco 2821--------Internet
 192.168.10.0/24-----------192.168.10.1 -RV042-----public, static IP address------Cisco 2821--------Internet
 
ASA5520 config:
----------------------
name 192.168.10.0 VPN
 !
interface GigabitEthernet0/1
nameif NET
security-level 100
ip address 192.168.113.6 255.255.255.0

[code]....

View 5 Replies View Related

Cisco Routers :: Rv042 Quick VPN Windows 7 Unable To Access Network Shares Or Ping

Nov 26, 2011

I have an RV042 using Quick VPN to connect to a remote network. I have port 1723 forwarded to a static IP address on a Windows 7 Pro 64 bit PC. I can establish the VPN and ping a printer but not the Win 7 PC. I can not acccess any shares on the pc via the IP address. It has Norton Antivirus and Windows Firewall. This remote PC replaced a Windows xp PC that allowed access to the shares. I have tried access with a Windows XP Pro and Windows Vista Home Premium PC. Neither have worked.

View 1 Replies View Related

Cisco Routers :: RV042 With Two Subnets For A Web Server?

Dec 21, 2011

I have a static DSL  connection and my ISP is giving me 4 static IP's. I have connected my  RV042 to the DSL modem and I have now 1 subnet at 192.168.0.0. What I  want to create is a WEB server/ Email server, but to sit on a different  subnet - 192.168.5.0. For now I have connected the server to the DMZ  port, but I am unable to to access it from WAN, only from LAN. How to configure properly the 2 subnets (192.168.0.0 and  192.168.5.0) and how to forward my static address to the server which I  which to be on the 192.168.5.0.

View 4 Replies View Related

Cisco Routers :: RV042 Can't Locate DNS Server

Dec 14, 2012

I'm trying to set up an RV042 as a gateway for our home network. I've cloned the MAC address of the cable modem attached to WAN1, and have set up WAN1 to obtain an IP automatically. The System Summary page shows under WAN Status that WAN1 has been assigned an IP address in the right range for Comcast, the provider. The default gateway address looks good, and the DNS server is, in fact, Comcast's main DNS server for this area.
 
However, when I go to System Management > Diagnostic, the router is unable to resolve basic domain names (e.g., www.cisco.com) or ping addresses outside the LAN. I can ping the router itself successfully. Attempts to access the web through the router fail on domain name look.

View 4 Replies View Related

Cisco Routers :: RV042 Giving Out Certificate Instead Of Server?

Jan 28, 2013

RV042 router is giving out the outer certificate  instead of server certificate. Outlook anywhere is failing and we are receiving certificate errors for any secure site behind this firewall.  I'm not talking  about remote  management. I'm talking about people trying to access our  web site,  which is secured, and getting an error because the RV042 is  giving its  own SSL certificate instead of the Server's certificate.  Firmware Version:  1.3.13.02-tm.  I don't see any updates for that  hardware.  I do have it working on an RV042 with the same firmware at a different location.  How do we turn that off or keep it from happening?  Output from a test site Attempting to resolve the host name xxxx in DNS.The host name resolved successfully. Additional DetailsTesting TCP port 443 on host xxxx to ensure it's listening and open. The port was opened successfully. Testing the SSL certificate to make sure it's valid. The SSL certificate failed one or more certificate validation checks. Test Steps ExRCA is attempting to obtain the SSL certificate from remote server xxxx on port 443. ExRCA successfully obtained the remote SSL certificate. Additional Details Remote  Certificate Subject:

SN=California, L=Irvine, C=US, O="Cisco-Linksys,  LLC", OU=RV042, CN=68:ef:bd:b8:0f:78, Issuer: SN=California, L=Irvine,  C=US, O="Cisco-Linksys, LLC", OU=RV042, CN=68:ef:bd:b8:0f:78.Validating the certificate name. Certificate name validation failed. Tell me more about this issue and how to resolve it Additional Details Host  name xxxx doesn't match any name found on the server  certificate SN=California, L=Irvine, C=US, O="Cisco-Linksys, LLC",  OU=RV042, CN=68:ef:bd:b8:0f:78.

View 1 Replies View Related

Cisco Routers :: RV042 V3 - How To Activate Telnet Server

Jan 25, 2012

I wish to change ARP table or any else to get a WOL functionnality.
 
I found how to activate telnet server, but I don't have the right login and password.

View 1 Replies View Related

Cisco Routers :: Multiple Internal Web Server RV042

Aug 15, 2012

We have setup a new internal web server so now we have two internal web server and both or hosting sites on port 80. Currently we have port 80 forwarding to one of the web servers and users are able to hit it from the outside. 

Is there any way to configure the RV042 to route web traffic to the correct web server by using the site name or dns?  If a user puts in the address{URL}, be routed to one web server but if they put in {URL}, be routed to our second web server.   I've checked with our vendors and the both web servers applications need to run on port 80.  If we have forwarding setup on the RV042 to forward port 80 to web1 then users can't access web2 from the outside?

View 3 Replies View Related

Cisco Routers :: RV042 Giving Out Router Certificate Instead Of Server

Nov 28, 2012

Just installed RV042 router. And it's giving out router certificate instead of server certificate so people who are trying to access our secured server are getting errors. I'm not talking about remote management. I'm talking about people trying to access our web site, which is secured, and getting an error because the RV042 is giving its own SSL certificate instead of the Server's certificate. How do we turn that off or keep it from happenning?
 
The RV042 firm version is v4.0.0.07-tm (Aug 19 2010 19:19:50)

View 5 Replies View Related

Cisco Routers :: Configure RV042 Dual WLan / Web And DNS Server

Aug 19, 2011

I need configuring Cisco RV042 dual wlan and port forwarding for 2 servers web and dns in LAN

View 1 Replies View Related

Cisco Routers :: RV042 Email Server Not Send Mail When Switch From Wan

Sep 28, 2011

Just installed a RV042 with dual wan connections. Would like to make the WAN 2 (new cable modem as well) the primary connection over WAN1 (DSL), however whenever I switch from WAN1 to WAN2 in Smark Link set up, our email server will not send mail out, even though nothing is blocking the connection.

View 0 Replies View Related

Cisco Routers :: No Access Information Logged For PPTP Server On RV042?

Nov 25, 2012

I have configured PPTP Server on RV042, and created 3 accounts. I am able to connect from Windows PC without any problems.
 
In the router's logging utility, there doesn't appear to be any log entries indicating either successful or failed attempts to connect to PPTP server. The only access logs I see are for access to the router's configuration utility. Is there a way to view PPTP access in the router system log?

View 4 Replies View Related

Cisco Routers :: RV042 - DHCP Giving Out Wrong Default Gateway And DNS Server

Oct 3, 2012

I have a RV042 router. The problem that I am having with it is that the DHCP is giving out the wrong Default Gateway and DNS Server. There is no option to change the DHCP server IP on any of the settings pages on the router. I am begining to think that there might not be a way to do it.  I see that there is an option for the DNS under the DHCP page but the Public IP that is being handed out is not the one on that page. I also have 2 WAN connections hooked up as well a DSL link and a Cable link (the cable link is the primary one).
 
The following information is provided in an effort to resolve this issue:
IP of Router 10.0.0.2
IP of DHCP Server (the one that is being handed out):10.0.0.1
IP of DNS (the one that is being handed out): 10.0.0.11
 
What I want to it be.
IP of Router: 10.0.0.2
IP of DHCP 10.0.0.2
IP of DNS 10.0.0.2

View 3 Replies View Related

Can Ping From Server But Can't Ping To Work Stations

Jan 26, 2012

I installed window server 2003 in a old Pentium III server as a standalone test server. Now I want to use it as a print server and connected it to the domain. I can ping workstations and other servers from that test svr. But i cannot ping that test server from the work stations.

View 2 Replies View Related

Routers / Switches :: Windows Ping Success But Mac Ping Fails

Aug 15, 2011

When I ping an address from my windows machine, it succeeds, but when I ping to the same IP on my MAC OS X machine, it fails.

1. Why?

2. How to get successful ping on my MAC machine?

View 1 Replies View Related

Linksys Wired Router :: RV042 - Can't Access Internet Or Ping Gateway

Jan 4, 2011

I am using the default configuration at this point.  I just connected 1 computer using the default IP with DHCP on the RV042 router. 192.168.1.0/255.255.255.0.I connect my wildblue satalite modem using a static IP address 75.106.203.xxx / 255.255.252.0 I can ping the RV042 router and the static IP address of the wildblue router but I can't ping the gateway on the wildblue side.  Either from the PC or the Router diag tools.

View 1 Replies View Related

Windows 2003 Server - Dhcp Server Cannot Ping Client

Sep 29, 2011

i am facing the same problem now but am using windows 2003 server

View 1 Replies View Related

Cisco Routers :: Auto / Programmatic UPnP Port Forwarding For RV042 And E4200 Routers

Jan 24, 2013

I have RV042 and E4200 routers . I tried the manual UPnP port forwarding using Rv042  router and was succesful ( by typing 192.168.1.1  in the explorer and  logged in using user name and password )
 
I am using a linux embedded system  whose  Internal IP ,Internal port  are mapped  .This system is connected to one of the LAN ports    
 
I want to try auto UPnP port forwarding both for  RV042 router and Linksys E4200 routers 
 
After  enabling the Upnp option only  and logging out ,Can i add a port mapping entry in this router without logging in  using  a  C++ program  which runs on  linux embedded system .

View 2 Replies View Related

Cisco Routers :: RV042 / RV042G / Small Business Routers With Inter-VLAN Capability

Aug 22, 2012

I was looking for a small business router that has VPN support and dual WAN support for load balancing. Upon reading reviews, I think RV042/RV042G is a good choice. Now am thinking if it supports intervlan/ router-on-a-stick configuration?

View 5 Replies View Related

Linksys Wired Router :: Cisco RV042 With Two Subnets For A Web Server?

Dec 21, 2011

I have a static DSL connection and my ISP is giving me 4 static IP's. I have connected my RV042 to the DSL modem and I have now 1 subnet at 192.168.0.0. What I want to create is a WEB server/ Email server, but to sit on a different subnet - 192.168.5.0. For now I have connected the server to the DMZ port, but I am unable to to access it from WAN, only from LAN. how to configure properly the 2 subnets (192.168.0.0 and 192.168.5.0) and how to forward my static address to the server which I which to be on the 192.168.5.0.

View 1 Replies View Related

Linksys Wired Router :: Configure Cisco RV042 To Access PPTP VPN Server?

Jun 7, 2012

how i can configure the Cisco RV042 to access PPTP VPN Server (Witopia VPn) or other vpn servers.

View 1 Replies View Related

Cisco Routers :: RV042 Won't Get Second IP

Feb 27, 2012

I have two Internet connections-
 
1-DSL Modem (WAN1-Internet Port)
 
2-Cable Modem-Comcast (WAN2-DMZ/Internet Port)
 
I connected the DSL (WAN1-Internet) port in and the Cisco RV042 was able to get an IP automatically. I tested the connection and it works just fine. Then I connect the Cable Modem-Comcast (WAN2-DMZ/Internet Port) in and I have the RV042 automatically optain IP address. But it just says 0.0.0.0. I've tried release/renew and that does nothing. Also, when I connect the 2nd Internet connection the Internet goes down. The only way it goes back up is when I disable under the PORT MANAGMENT setting.
 
All the settings have been kept to the default.How can I get the router to obtain an IP address from the Cable Modem-Comcast (WAN2 DMZ/Internet Port).

View 5 Replies View Related

Cisco Routers :: NAT Over VPN On RV042

Mar 6, 2012

We have an Cisco RV042. We need to setup a VPN with a business partner who is already using our current IP scheme on another VPN with another client. They have asked us to NAT our IP's from 192.168.25.x to 192.168.245.x
 
I can't seem to figure this out on this router.  I have done it on a Sonicwall and Watchguard, but can't seem to get it to work on the RV042.
 
I have setup the VPN and the One-To-One NAT.  The tunnel will connect (using the 245.x IP as our local IP on the VPN setup), but no traffic will pass through.

View 1 Replies View Related

Cisco :: Can't Ping New Firewall From Server

Jul 8, 2011

I've recently swapped out an old pix firewall for a new ASA5505 and have been trying to match the configs as best I can. However I still can't ping the new firewall from the server and it still won't let them serve out. The firewall exists on a separate VLAN (vlan30), but the previous pix never seemed to care about that. I'm wondering if that might be part of the problem.

View 8 Replies View Related

Cisco VPN :: Cannot Ping DNS Server ASA 5510

Jan 30, 2013

I have recently got our Cisco engineer to create a VPN connection to our network through a ASA5510. I am able to ping all devices on the network bar two servers (2xW2K3, one configured with AD/DNS and the other is a AD/file server) using IP addresses ,However, I cannot ping any devices using host names. The engineer has entered in the correct IP address of our DNS server, but still we have this issue. As the VPN client cannot ping the DNS server, it is unable to resolve the host names, but I cannot seem to work out why we cannot ping the DNS server.

View 1 Replies View Related

Cisco Routers :: Rv042 Configuration With Vpn?

May 20, 2012

i was planed to make a vpn over rv042 so i get the rv042 connected behind a thosmon 456(configured as a bridge) and 1 static ip ... and i configured the vpn and worked great ...but due to some circumstance i get a package of 6 ips insted of the old ip , so when i try to configure the router with the ISP they but the wan ip 10.232.x.x and told me that an internal ip from there lan ... and give me the 6 ip of 196.x.x.x to use as 1 for internal interface for the rv042 and 5 for the pc's,now the vpn not working anymore...notice: when try to configure the vpn tunnle in the local securty setting i mark the ip only and the ip that abear is the wan ip 10.232.x.x but i can't ping that ip beside i can ping the internal ip of the router 196.x.x.50does rv042 can support static and virtual ip inside the lan |! can i configure the thomson as pppoe and use one static ip from 196.x.x.x as wan ip for it ... and use anther 196.x.x.x ip for the rv042 to get access from outside and connect the lan to the rv042 with internal ip 192.168.x.x ...so i can access the vpn from outside .....and can connect the device i need to use static ip to the thomson ...

View 0 Replies View Related

Cisco Routers :: RV042 - Bug Found In VPN?

Sep 23, 2011

Firmware v4.0.4.02 has a nasty bug in the VPN section.  If you switch to "IP by DNS Resolved" (yes, it says "Resolved" instead of "Resolution".  Gotta love all the Engrish in the RV042!), it will automatically populate the field with "@yourdomain.com".  This will cause the VPN to not lookup the proper IP address.  Simply deleting the atmark after it populates will fix the problem.
 
Let's see what happens when we validate a Cisco RV042 webpage:
 
Errors found while checking this document as HTML 4.01 Transitional!
Result:     353 Errors, 1 warning(s)
 
Don't even get me started on the horrible Javascript...

View 0 Replies View Related

Cisco Routers :: RV042 To ASA VPN Not Coming Up?

Apr 24, 2013

i am trying to make a simple Site to SiteVPN between two offices, one has Cisco ASA and one has RV042 router.when traffic initiated from ASA side, i keep getting this message in Debug and tunnel wont come up
.
[IKEv1]: Group = A.A.A.139, IP = A.A.A.139, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.Apr 26 00:15:53 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
 
whereas if traffic initiated from RV042 side, i keep getting this message in debug and tunnel wont come up.
 
Apr 26 00:43:44 [IKEv1 DEBUG]: IP = RV.RV.RV.139, Oakley proposal is acceptableApr 26 00:43:44 [IKEv1 DEBUG]: IP = RV.RV.RV.139, IKE SA Proposal # 1, Transform # 0 acceptable Matches global IKE entry # 6Apr 26 00:43:44 [IKEv1]: IP = RV.RV.RV.139, Connection landed on tunnel_group RV.RV.RV.139Apr 26 00:43:45 [IKEv1]: IP = RV.RV.RV.139, Connection landed on tunnel_group RV.RV.RV.139Apr 26 00:43:45 [IKEv1]: Group = RV.RV.RV.139, IP = RV.RV.RV.139, Freeing previously allocated memory for authorization-dn-attributesApr 26 00:43:45 [IKEv1]: Group = RV.RV.RV.139, IP = RV.RV.RV.139, PHASE 1 COMPLETEDApr 26 00:43:45 [IKEv1]: IP =RV.RV.RV.139, Keep-alive type for this connection: DPDApr 26 00:43:45 [IKEv1 DEBUG]: Group =

[code].....

View 1 Replies View Related

Cisco Routers :: Enabling 6rd On RV042?

Sep 27, 2012

Apparently one of my two ISPs,CenturyLink, supports 6rd connections to IPv6.
 
This is supported natively on my Q1000 ActionTec modem, however my modem is in "transparent bridging" mode, so that the RV042 v3 can be the only router.
 
how to configure the RV042 to operate in this manner.
 
Per the CenturyLink FAQ: the IPv6 address space is:
 
2602::0 /24
 
Most importantly, can I do this WITHOUT buying a new modem.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved