Cisco VPN :: 2911 Router / IPad - Could Not Validate Server Certificate
Jan 23, 2012
i have windows 2008 R2 as CA server. and i also have 2911 router as remote vpn server. Everything works fine for desktops computers and leptops. Users automatically enroll certificates on Microsoft CA server and get connected to vpn. But problem is with ipads. When i try to connect from ipad error massage deslpays "Could not validate the server certificate" and i also get chis error massage from router "CRYPTO-4-IKMP_BAD_MESSAGE: IKE message from x.x.x.x failed its sanity check or is malformed"
With ipads built in vpn client i can see the installed certificate and use it but with anyconnect client no certificates are displayed.
I've configured in an UC520 a SSL VPN.I can access properly and I can see the labels, but I only can access urls which are http, not https:I can access the default ip of the uc520 (192.168.1.10) but When I try to get access to a secure url I get the msg: Failed to validate server certificate I'm trying to access a Cisco Digital Media Manager, whose url is URL Does the certificate of both hardware has to be the same?
I have some iPhone in my company and they connect to VPN through an ASA (version 8.0.4). The vpn connection use a certificate to validate that the device can connect. All my devices used the ASA IP address to connect, I decide to change that and use a name to connect ( DNS resolution made by the ISP), a generate a new certificate and made a new vpn connection profile. My PC, mac book pro can connect using the new connection, but my iPhone display the message : "Could not validate certificate". I've checked all the configuration and can't find where the difference between my two connection profile.
In my test lab I can't to make work my webvpn configuration = I have several components: MS AD, MS CS (but without NDES), router 2911 and client computer. Client and router have a certificate from MS CS. In my configuration I use authentication by certificate or aaa (LDAP) and authentication by aaa working good. But authentication by client certificate doesn't work. And my internal https services don't work also - "Invalid or no certificate", but this strange because I imported CA certificate for this.
My 2911 version: Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(3)T, RELEASE SOFTWARE (fc1)
My Config:
aaa authentication login webvpn group ldap local ip local pool webvpn 192.168.200.1 192.168.200.254 bind authenticate root-dn cn=webvpn,ou=staff,dc=domain,dc=com password P@ssw0rd webvpn gateway vpn ip address <ip address> port 4443 ssl trustpoint root-ca
The IPAD VPN works great over token, radius and local authentication. But now we need to authenticate vpn client via digital certificate (only vpn authentication between client and gateway)? I'm not sure which certificate we should buy to authenticate vpn client.The plan is to install digital certifiacte on VPN Gateway (CISCO ASA 8.0.4) and IPAD Cisco IPSec client to eliminate user/pass authentication.
Have WLC 5508 running 7.4 code; have wlan setup to allow access to internal network. Users on ipads should be able to connect to this wlan and authenticated via certificate instead of PSK. We have setup laptops that are part of domain to use internal CA for authentication to WLAN. Ipads are not part of domain so we are not able to use the same model, or can we use the same model for authentication?How to setup WLC to authenticate ipad users via certificate instead of PSK while connecting to the WLAN?
Currently the ACS 5 is authenticate the iPhone/iPad by using the MAC address (which is entered manually) and AD user/password, i need to do that with certificate, so it will be scalable.
Just installed RV042 router. And it's giving out router certificate instead of server certificate so people who are trying to access our secured server are getting errors. I'm not talking about remote management. I'm talking about people trying to access our web site, which is secured, and getting an error because the RV042 is giving its own SSL certificate instead of the Server's certificate. How do we turn that off or keep it from happenning?
The RV042 firm version is v4.0.0.07-tm (Aug 19 2010 19:19:50)
I have couple of issues with my EasyVPN server and Cisco VPN Client on Win7.
1: VPN Client establishes the connection, traffic flow, destination network can be pinged. After a few minutes traffic stops passing the VPN. No ping to IP or DNS names can be made. In order to resole it. Users have to re-establish the VPN again. Occastioanl it stays and continue to work.
2: VPN Clients don't pick the same IP address from local address pool even though I specified "RECYLE" option in the IP local pool command.
Configuration:
############################################################################## TQI-WN-RT2911#sh run Building configuration... Current configuration : 7420 bytes ! ! Last configuration change at 14:49:13 UTC Fri Oct 12 2012 by admin ! NVRAM config last updated at 14:49:14 UTC Fri Oct 12 2012 by admin
We have enabled EAP-TLS authentication for our wireless LAN end user in our network setup , And we have defined certificate on our old acs server 3.3 from a third party CA . I want to use the same certifcate which is being used in 3.3 ,how i can copy that certficate from 3.3 and get it installed on new acs 4.2 .
Is it possible to use Server 2003 SMB with IAS WITHOUT a certificate? So someone with a laptop could get on the WLAN with their AD credentials without me giving them a cert?
I configured DHCP pool on Cisco AP 1131, Laptop users are working fine and obtain IP address from AP 1131 DHCP Server, but IPad user is getting IP problem when he try to connect Cisco AP 1131.when i reboot the AP, IPad user getting IP address from 1131 AP dhcp server and access the network resource for the 2-3 hr after that IPad show "obtaining ip address from .....".
AP Detail- AIR-AP1131AG-N-K9 c1130-k9w7-tar.124-10b.JA2 12.3(8)JEA
I'm in the process of setting up PEAP with ACS 5. From understanding the certificate that I generate is a server side certificate used between ACS and CA authority. However, according to the Cisco document that I'm using it sounds like I still have to install a certificate on the wireless clients that validate the server certificate. Is there a process to push this cert out via AD or do I need to manually install it and if I wanted can I get away with out checking the validate the server certificate on the wireless client?
RV042 router is giving out the outer certificate instead of server certificate. Outlook anywhere is failing and we are receiving certificate errors for any secure site behind this firewall. I'm not talking about remote management. I'm talking about people trying to access our web site, which is secured, and getting an error because the RV042 is giving its own SSL certificate instead of the Server's certificate. Firmware Version: 1.3.13.02-tm. I don't see any updates for that hardware. I do have it working on an RV042 with the same firmware at a different location. How do we turn that off or keep it from happening? Output from a test site Attempting to resolve the host name xxxx in DNS.The host name resolved successfully. Additional DetailsTesting TCP port 443 on host xxxx to ensure it's listening and open. The port was opened successfully. Testing the SSL certificate to make sure it's valid. The SSL certificate failed one or more certificate validation checks. Test Steps ExRCA is attempting to obtain the SSL certificate from remote server xxxx on port 443. ExRCA successfully obtained the remote SSL certificate. Additional Details Remote Certificate Subject:
SN=California, L=Irvine, C=US, O="Cisco-Linksys, LLC", OU=RV042, CN=68:ef:bd:b8:0f:78, Issuer: SN=California, L=Irvine, C=US, O="Cisco-Linksys, LLC", OU=RV042, CN=68:ef:bd:b8:0f:78.Validating the certificate name. Certificate name validation failed. Tell me more about this issue and how to resolve it Additional Details Host name xxxx doesn't match any name found on the server certificate SN=California, L=Irvine, C=US, O="Cisco-Linksys, LLC", OU=RV042, CN=68:ef:bd:b8:0f:78.
My customer has SSL certificate already installed on microsoft exchnage 2010 servers and now wanted to import that certificate to cisco ACE4710.
How to trace the exact procedure to import the SSL Cert to ACE from microsoft exchange server and how about the KEY, from where I should get the KEY to cross verify for SSL Cert?
In my client office, We have replaced small business router cisco RV042 with Cisco ISR router 2911, in that router we have configured NAT to allow internal user to access internet and port forwarding for outside user to access web servers and other application that are hosted internally.
we are not able to access [URL] (name changed) from internally and one of the application that are runnning on port no. 8280., and same is working properly from outside the network.other application that running on 8287 is accessible form internally.
We are accessing with ip address http://192.168.1.51:8280. and [URL] not working from inside.
We recently installed a 2911 sec router.On this device there are three Ipsec GRE Tunnnels which are working fine and an Easy VPN Server.The problem is that when clients connect to the easy vpn server they cannot ping anything inside , the configuration regarding protected networks is fine.After restarting the router the first client conneced works but when disconnected all the others are authenticating and the cant see anythining in the internal network . By checking the routing table i realized that the route to the virtual access interface is missing for no reason. i used the #debug ip routing detail command and i got the following during the client connection
Mar 31 09:51:37.875: RT: interface Virtual-Access5 removed from routing tableMar 31 09:51:37.875: RT: delete route to 192.168.20.9 via 79.xxx.xxx.xxx, Virtual-Access5
I bought a new WRVS400n recently because it had Gigabit speed, wireless n and a built in VPN server. The device works perfect except for the Quick VPN client. I'm a system engineer so I thought I could set it up quite easy just like any other device I configured in the past. Painfull but it isn't like this.
I set up the VPN on the WRVS4400n and generated a certificate. I saved both the client and admin certificate to my pc, I gave them a name to easily make up the difference between both of them. When placing the certificate in the installed QuickVPN folder, it doesn't seem to get recognised by the QuickVPN software. When I try to connect, it says 'Server's certificate doens't exist on your local computer'. I guess the naming convention must meet some kind of format, is that correct? If so, this should have been described in the documentation.
Besides that I checked if the required ports used by the VPN server are open on the public port of the device, that is the case. So It seems I'm quite close to get it working.
The version of QuickVPN I used is 1.4.2.1. The WRVS4400n has the latest firmware loaded.
There is ASA with remote access VPN and users are authenticated using third party signed certificates (CA is not local in ASA).When user certificate expires i can see it in syslog messages. For example:
%ASA-3-717009: Certificate validation failed. Certificate date is out-of-range, serial number: (...)
I would like to know if there is an opportunity to view user's certificate expiry date beforehand, say, 3 days before?
I received a message stating: Info-error attempting to validate the winsock base providers:2 Error- Not all base service provider entries could be found in winsock catalog. A reset is needed. Info- Redirecting user to support call I did the reset in command prompt as I read you told other people with this problem to do. But I still keep getting these messages.This is my sister's Dell Latitude 620.I used AVG and I think pc is clean. When I try to connect to a website page states that Internet Explorer cannot display the webpage.
I am having a problem using my Windows IAS radius server to validate management users for my 2112 Wireless Lan Controller.I have defined the radius server and it works ok with the policy for validating wireless clients but not for WLC management users.The Remote access policy seems to be set up correctly as the event viewer on the server shows:-
*Feb 09 11:06:06.612: %EMWEB-1-LOGIN_FAILED: ews_auth.c:2104 Login failed. User:xxxxxx. Service-Type is not present or it doesn't allow READ/WRITE permission..
I have numerous phones and laptops that connect to the router just fine and fastThis ASUS laptop (windows 7) with Centrino N6150 is very slow to validate. At least it appears that's the issue. The icon in the tray starts with a ! in the connection, then in about 45 seconds goes to a blue chase circle, then in about 45 seconds connects.istory. I was getting disconnects from the WIFI router on a continual basis. I decided to put the router back to factory settings, did the pin reset etc, did a full setup and now we have this slow connect issue ALTHOUGH I never get a disconnect if I once get connected. Just seems to take forever to get it to connect.I've looked at conflicting IP's, no avail, seems fine. As mentioned, like the iphones connect almost instantly. The HP laptop connects fast (windows 7) but the asus now isn't happy.
I have been hacking at this problem for two days and can not figure it out.I built a new computer ASUS M3A78-T and installed windows 7 64bit everything was working fine. I did not validate the version of windows because I was waiting to replace the 500g hard drive with a 120 ssd. By the time I recieved the ssd windows validation time had expired, I tried to validate the version of windows and I could not because the network adapter was now gone! This is strange because when I first built it it as fine and I was all over the internet via broadband ethernet cable.Now the internet box has a red x and will not recognize the cable and no lights are flashing on the back as well. It seems I ned to reinstall the driver so I used another computer and downloaded the only LAN file from ASUS website and nothing.
I am planning to perform a failover drill between active and standy CSS loadbalancers which are configured in a cluster pair. I am looking for help to know what show commands I can run to validate that the failover occurred successfully from primary to secondary load balancer and that the VIP's have failed over successfuly as well.
I've had occasional issues with 5505 upgrades going south when the boot hangs on the image load due to a corrupt image. I need a way to validate the checksum of the new image after it is copied to flash. Remote upgrades become a real pain when you have to go onside just to delete an image, copy it into flash again, and boot.
I have a Cisco 2911 router configured with a couple of VPN tunnels . The issue that I am having is that I cannot access the servers (WEB,EMIL) thru the tunnel . After looking around found out that adding a route-map to my static NAT rule will fix the issue . Once I do that I am able to access the serves thru the VPN but my local machines lose internet access .So I have to delete the access list The issue seems to be with the Access list 110 permit ip [code]
I am having one router CISCO2911/K9 (Cisco 2911 w/3 GE,4 EHWIC,2 DSP,1 SM,256MB CF,512MB DRAM,IPB). But now my management asking me to upgrade this router as CISCO2911-SEC/K9.
I am operating a 2800 series Cisco router. The router is working fine except that I am not able to SSH into the router. I have checked the running config with cisco's documentation and every line is correct. Prior to me getting this job they did an update and think they have corrupted the a certificate key for SSH.
Any command to generate just the SSH key and not all the other keys that would cause bigger connection issues.
I have an iPad2 and a Belkin F6d4230-4 wireless router. I no longer have a computer. If I reset the router can I setup the network without having to hard-wire the router to a computer first?
