Cisco VPN :: EasyVPN Server (Router 2911) VPN Client On Windows 7?
Oct 11, 2012
I have couple of issues with my EasyVPN server and Cisco VPN Client on Win7.
1: VPN Client establishes the connection, traffic flow, destination network can be pinged. After a few minutes traffic stops passing the VPN. No ping to IP or DNS names can be made. In order to resole it. Users have to re-establish the VPN again. Occastioanl it stays and continue to work.
2: VPN Clients don't pick the same IP address from local address pool even though I specified "RECYLE" option in the IP local pool command.
Configuration:
##############################################################################
TQI-WN-RT2911#sh run
Building configuration...
Current configuration : 7420 bytes
!
! Last configuration change at 14:49:13 UTC Fri Oct 12 2012 by admin
! NVRAM config last updated at 14:49:14 UTC Fri Oct 12 2012 by admin
[code].....
View 2 Replies
ADVERTISEMENT
Apr 28, 2011
So I have three ASA 5505 firewall. my firewalls we are in the test environment. I read on the net that when you have a situation like in my company where are headquarter and two offices, i should put in each branch office and headquarter one asa firewall and a firewalls should be configured as easyvpn.
VPN server is in headquarter and easyvpn's are in branch offices. i tried everything, but we could not configure them. maybe it's not a problem that in my test environment at my the external interfaces which have static addresses on these three firewalls, respectively serever 192.168.2.1, 192.168.2.2 and 192.168.2.3 client client. I seted firewalls by following the instructions, but does not work
[URL]...
I solved the problem with the server as a remote access VPN. client workstations that are on the 192.168.2.0/24 network can access a local LAN via VPN. But when you put the ASA 5505 firewall. clients on the LAN side of the firewall can not access the VPN. I use software products Cisco VPN Client 5.0.06, but when I create a connection and try to connect to get an error secure vpn connection terminated locally by the client. reason 412: the remote peer is no longer responding.
View 2 Replies
View Related
Nov 2, 2011
EasyVPN PIX515 server and ASA5505 client?
View 4 Replies
View Related
Oct 26, 2010
I am using Cisco configuration professional to set up one easy vpn server on 887-K9,vpn client can dial up the server successfully but can only ping router but on other lan. Looks like there is a nat issues between lan and vpn client?
View 5 Replies
View Related
Mar 20, 2012
i have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
EasyVPN Server 192.168.202.0/24 Network extension mode to Client EasyVPN ASA 192.168.1.0/24 This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a 192.168.21.0/24 pool. This works fine. But how am i able to connect to the 192.168.1.0/24 network from this client?
View 5 Replies
View Related
Nov 27, 2011
On my 2911 router, can I have both an Easy VPN server, and a site-to-site VPN? Also, with an Easy VPN, is it possible to specify another internet (outside) IP address in my assigned range as the address remote users use . . . rather than the specific IP address assigned to the interface?
View 3 Replies
View Related
Jun 24, 2012
I am using 3945E Router as Easy VPN Server, with 15.1 IOS. On router I have bunch on usernames for VPN authentication, I want to restrict Router management access for them(ssh,telnet, http and so on).
View 2 Replies
View Related
Jul 11, 2011
I have a Cisco ASA 5505 which is setup as an EasyVPN client to e remote VPN concentrator.
The Cisco ASA has the 50 internal user license with 10 VPN peers.
We just upgraded the license from the base 10 internal user to 50 user license but it has not resolved the problem and only 10 internal users still work, the 11th fails.
Does each EasyVPN client on the inside network take up 1 of the 10 VPN peer licences?
This seems to be the issue from what I can see, just need confirmation.
View 1 Replies
View Related
Sep 29, 2011
i am facing the same problem now but am using windows 2003 server
View 1 Replies
View Related
Mar 8, 2012
I have a Cisco ASA 5505 which is setup as an EasyVPN client to e remote VPN concentrator.The Cisco ASA has the 50 internal user license with 10 VPN peers.We just upgraded the license from the base 10 internal user to 50 user license but it has not resolved the problem and only 10 internal users still work, the 11th fails. Does each EasyVPN client on the inside network take up 1 of the 10 VPN peer licences? This seems to be the issue from what I can see, just need confirmation.
View 3 Replies
View Related
Aug 28, 2011
(Router is ISR 1921)This is doing my head in. I am not using NAT, there are no ACLs, there is no split horizon.Here is what I have. It is practically generated by CCP. When connected I cannot ping the loopback interface or the gig0/0 interface, (not to mention anything else).
version 15.0
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname dcsgw1
[code]...
View 13 Replies
View Related
Jul 5, 2011
I need to configure our ASA5505 firewall for remote access to our network using EasyVPN software installed on a laptop. That laptop will be connected in the different places, using DSL or 3G toggle or Public Wi-Fi. For some people it's very easy, but I don't have any experience with firewalls.
View 9 Replies
View Related
Jun 3, 2012
In my test lab I can't to make work my webvpn configuration = I have several components: MS AD, MS CS (but without NDES), router 2911 and client computer. Client and router have a certificate from MS CS. In my configuration I use authentication by certificate or aaa (LDAP) and authentication by aaa working good. But authentication by client certificate doesn't work. And my internal https services don't work also - "Invalid or no certificate", but this strange because I imported CA certificate for this.
My 2911 version: Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(3)T, RELEASE SOFTWARE (fc1)
My Config:
aaa authentication login webvpn group ldap local
ip local pool webvpn 192.168.200.1 192.168.200.254
bind authenticate root-dn cn=webvpn,ou=staff,dc=domain,dc=com password P@ssw0rd
webvpn gateway vpn
ip address <ip address> port 4443
ssl trustpoint root-ca
[code].....
View 3 Replies
View Related
Jun 16, 2011
I don't seem to be able to connect to my cisco 831 router with easy vpn server configured using my Blackberry Playbook. Looking at the console of the router i can see the debugging but am not sure what it all means.
Current configuration : 2574 bytes!version 12.3no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname Router!enable secret 5 $1$FM71$y4ejS2icnqX79b9gD92E81enable password xxxx!username CRWS_Ritesh privilege 15 password 0 $1$W1fA$o1oSEpa163775446username shamilton privilege 15 secret 5 $1$wFLF$8eRxnrrgVHMXXC0bXdEGi1aaa new-model!!aaa authentication login default localaaa authentication login ciscocp_vpn_xauth_ml_1 localaaa authorization exec default localaaa authorization network ciscocp_vpn_group_ml_1 localaaa session-id commonip subnet-zerono ip
[code]....
View 13 Replies
View Related
Sep 4, 2011
I recently purchased a Cisco 2911 to replace my Cisco 1711 router. I copied the configuration from the Cisco 1711 router to the Cisco 2911 router. Everything seemed to work correctly except when I VPN tunnel into the Cisco 2911 router using Cisco's VPN client version 5.0. I can ping the router LAN interface from my PC that is VPNed into the router but I can no longer ping or access the devices on the LAN side of the router as I did on the Cisco 1711 router. I don’t see errors in the log or hits blocking anything in the acls. It’s using the same configuration that I had on the Cisco 1711 router, and this did work on the Cisco 1711. The Cisco 2911 router is running IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1).
Here is the VPN clinet portion of the configuration: The LAN is addressed as 192.168.0.0/24. The router LAN interface is 192.168.0.1, which I can ping and access. I can't ping or access anything on the LAN (192.168.0.0/24) beside the router.
aaa authentication login vpnclientauth local
aaa authorization network vpngroupauth local
!
crypto isakmp client configuration group remote-clients
key 6 xxxx
pool clients
[Code]....
View 11 Replies
View Related
Feb 25, 2013
How to setup option 150 in IP pool on VPN Client.
View 2 Replies
View Related
Jul 11, 2012
I have been trying to configure Cisco1941/K9 as Easy VPN Server through CiscoCP.The tunnel comes up but I cannot pass any traffic to the secure LAN (GigEth 0/1). When the tunnel comes up, I can ping the Loopback interface and the GigEth 0/1 interface IPs.
View 21 Replies
View Related
Dec 5, 2011
I have a Cisco ASA 5510 and a Cisco ASA 5505. I want to configure the ASA 5510 as Easy VPN Server and 5505 as Easy VPN hardware client.Using either CLI or ASDM.
View 1 Replies
View Related
Mar 8, 2011
how to change a windows 2003 server name through client
View 1 Replies
View Related
Nov 20, 2011
Why i can't ping client to server using LAN connection. but i can ping server to client. i use windows server 2003 as a server.
View 1 Replies
View Related
Jul 5, 2012
I use vmware workstation, and doing small networking project.i use 1 windows server 2008 x64 sp1 as DC, DNS and DHCP with 2 nic(1 nic for local(vmnet2) and 1 for internet(NAT)) and i use 1 windows 7 client machine.in server local nic settings are ip 200.200.200.1 sm 255.255.255.0 gw: empty dns 200.200.200.1
and internet nic settings all set automatic.and in DNS i added forwarder as my company's actual DNS server name.My requirement is client should browse internet by resolving through my dns server.but the problem is my server is having internet but my client windows 7 does not have internet
View 6 Replies
View Related
Jan 19, 2012
We have a number of 5505 ASAs at remote sites all of which are configured to connect to one of two head-end servers.We need to change the primary head-end IP addresses. At the moment devices are successfully connected to the secondary.If we issue vpnclient server i.j.k.l e.f.g.h then the device drops off the network and won't reconnect until it is power cycled.If we make the changes in ASDM using the GUI to remove the old primary and add in the new primary the ASDM says "No changes made".Devices are running 8.2 and 8.4 code and behaviour is the same.
how to change head-end server IP addresses without the device disconnecting and not coming back up? According to the configuration guide the ASA should cycle through the addresses every 8 seconds until it can connect - but it doesn't seem to do this as it won't connect to the good secondary head-end either!
View 1 Replies
View Related
Jan 23, 2012
i have windows 2008 R2 as CA server. and i also have 2911 router as remote vpn server. Everything works fine for desktops computers and leptops. Users automatically enroll certificates on Microsoft CA server and get connected to vpn. But problem is with ipads. When i try to connect from ipad error massage deslpays "Could not validate the server certificate" and i also get chis error massage from router "CRYPTO-4-IKMP_BAD_MESSAGE: IKE message from x.x.x.x failed its sanity check or is malformed"
With ipads built in vpn client i can see the installed certificate and use it but with anyconnect client no certificates are displayed.
View 4 Replies
View Related
Feb 2, 2011
After trying to configure remote client VPN access to a Cisco 2911 ISR using the CLI I tried to use the Cisco Configuration Professional. However, either way I have the same problem. A client can successfully connect and access servers but just once. When the client disconnects and tries to connect again there is no access to the servers even though the VPN tunnel appears to be up. I've tried multiple versions of the Cisco vpn client SW and all behave the same: 1st connection can access servers, subsequent connections can't. I've also tried a second (different) client after the original connection and still no luck. If I reload the router the client can get the vpn connection and access the servers but if the client disconnects from the vpn and tries again there is no access to the servers.
I've also tried it with and without NAT but it doesn't seem to make any difference.
The config generated using CCP is as follows:
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
[Code].....
View 4 Replies
View Related
Nov 24, 2011
I want a simple remote client-initiated VPN for employees to access corporate resources from home simultaneously with being able to access the internet. I am using CCP and seem to have several options including Easy VPN server, SSL VPN. I also can choose "Full Tunnel" or not.I have a 2911 router. I have a static range of internet IP addresses. The router is already functioning with inside to outside and outside to inside NAT, etc.
View 1 Replies
View Related
Jul 5, 2012
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies
View Related
Nov 30, 2012
URL What changes are needed to the 2821 config that is behind another Cisco router? And what static ports should be opened on the MAIN Cisco router that is in front of the 2821?
View 1 Replies
View Related
Aug 25, 2012
I'm trying to configure 1700 K9 router to act as PPTP client and connect to Microsoft VPN server (in order to enable all clients on LAN to seamlessly access host on remote location). [URL]
I'm using GMS3 to test everything in lab environment. I managed to connect to Microsoft VPN server but the connection drops immediately. Below is debug info from router R1 (router R2 just simulates host on LAN) and configurations for both routers. The only clue I got from debug is that immediately before closing connection there's a message "CCP: Failed to negotiate with peer"...
R1#sh debug
PPP:
PPP detailed event debugging is on
MPPE Packet Details debugging is on
[Code].....
View 2 Replies
View Related
Oct 7, 2012
In my client office, We have replaced small business router cisco RV042 with Cisco ISR router 2911, in that router we have configured NAT to allow internal user to access internet and port forwarding for outside user to access web servers and other application that are hosted internally.
we are not able to access [URL] (name changed) from internally and one of the application that are runnning on port no. 8280., and same is working properly from outside the network.other application that running on 8287 is accessible form internally.
We are accessing with ip address http://192.168.1.51:8280. and [URL] not working from inside.
But all works fine with old cisco RV042.
View 9 Replies
View Related
Mar 30, 2011
We recently installed a 2911 sec router.On this device there are three Ipsec GRE Tunnnels which are working fine and an Easy VPN Server.The problem is that when clients connect to the easy vpn server they cannot ping anything inside , the configuration regarding protected networks is fine.After restarting the router the first client conneced works but when disconnected all the others are authenticating and the cant see anythining in the internal network . By checking the routing table i realized that the route to the virtual access interface is missing for no reason. i used the #debug ip routing detail command and i got the following during the client connection
Mar 31 09:51:37.875: RT: interface Virtual-Access5 removed from routing tableMar 31 09:51:37.875: RT: delete route to 192.168.20.9 via 79.xxx.xxx.xxx, Virtual-Access5
why is this route getting deleted?
View 2 Replies
View Related
Jun 1, 2011
I am attempting to access a VPN hosted on Windows 2003 Server using my Windows 7 SP1 / 64 bit laptop. I can establish the connection and even open Outlook and connect to the exchange server on the remote network. It seems that whenever I try to move files up or down or open Internet Explorer, the following sequence of events happens:
1) Connection between my local router (BEFRS41) and the internet is dropped.
2) The IP address on my local network adaptor changes to an unknown number (169.254.180.72) - is normally 192.168.1.104
3) The VPN connection drops and attempts to re-dial, but of course fails because my connection tot he internet has been broken.
Since I'm accessing rather than hosting the VPN, I'm not sure if I have to adjust any of the router settings.
View 3 Replies
View Related
Mar 20, 2013
We have:
Print server: TROY PocketPro 100s(Ethernet)
Cisco cat 2960
Cisco 2911
Config Cisco 2911
mac address of print server logged in dhcp pool
i can connect print server with home assus router.he is get dhcp options correctly.
!
! Last configuration change at 18:13:02 Moscow Thu Sep 20 2012 by root
version 15.1
service timestamps debug datetime msec
[Code].....
View 2 Replies
View Related
Jul 18, 2012
last week I installed a new router (2911) in my network.We had to create two different VLANs for the new setup to work as wanted.I have a Windows 2008 R2 which is a Domain Controller for Active Directory on the ip address 192.168.0.195.That server (HP DL180 G6) has two NICs. One has the above IP address and the other one has 192.168.0.199.
On the other VLAN, I have a server, running the same OS, that I want to re-join, as it formerly was, the AD on the first server (192.168.0.195). This server has the new IP address 192.168.10.194.All these are connected to a Cisco switch SG 200-50 Gigabit Smart Switch. That one is connected to a Cisco 2911 router.
The problem is that, once the old 192.168.0.194 got to be 192.168.10.194, the 192.168.0.195 can't ping it anymore... At least not all the time... Sometime it works, sometimes not... Neither can't the 10.194 ping the 0.195 all the time. When one way works the other one doesn't... When one pings the other one successfully, the other one can't...
View 5 Replies
View Related
