Cisco :: CIPC Not Registering On EasyVPN Server?

Feb 25, 2013

How to setup option 150 in IP pool on VPN Client.

View 2 Replies


ADVERTISEMENT

Cisco Phones Not Registering With CUCM But CIPC Is

Mar 31, 2013

I have a problem with my Cisco 7961 phones not registering on my CUCM 8.6 install on ESXi 5. Weird because I have Cisco IP communicator phones that register with no problem. You guys know what I can be missing. I have restarted the CUCM and services multiple times. The phone log on my phones say it can't find dhcp and DNS unknown host but my CUCM is configured by IP address. I also attached some screenshots

View 3 Replies View Related

Registering A FQDN And DNS For Home Use To Connect To Server?

Mar 26, 2011

I have a video hosting server on vmware and I need to be able to connect to it through it's domain name. It needs a FQDN. On it's network config it has spaces to enter in FQDN, IP, Subnet, and two DNS. It must use FQDN to connect through http.I was told I can just open up the system32/driver/etc/host file and edit in the info, ex: 1.1.1.2 [URL] I tried to ping 1.1.1.2 and it does ping, and I even tried to ping [URL] and it pings (not connected to the web). But I can't get the web interface to connect when i put in server.com:8080 (needs 8080) into my web browser. FYI, I have no idea about the DNS space on the server, I just put in some random number. Why does this server need a DNS anyways?This computer is not connected to the web or any other computer. It's just this computer and the vmware server on it.

View 4 Replies View Related

Cisco VPN :: Playbook And 831 EasyVPN Server?

Jun 16, 2011

I don't seem to be able to connect to my cisco 831 router with easy vpn server configured using my Blackberry Playbook.  Looking at the console of the router i can see the debugging but am not sure what it all means. 
 
Current configuration : 2574 bytes!version 12.3no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname Router!enable secret 5 $1$FM71$y4ejS2icnqX79b9gD92E81enable password xxxx!username CRWS_Ritesh privilege 15 password 0 $1$W1fA$o1oSEpa163775446username shamilton privilege 15 secret 5 $1$wFLF$8eRxnrrgVHMXXC0bXdEGi1aaa new-model!!aaa authentication login default localaaa authentication login ciscocp_vpn_xauth_ml_1 localaaa authorization exec default localaaa authorization network ciscocp_vpn_group_ml_1 localaaa session-id commonip subnet-zerono ip

[code]....

View 13 Replies View Related

Cisco VPN :: To Configure 1941 K9 As EasyVPN Server

Jul 11, 2012

I have been trying to configure Cisco1941/K9 as Easy VPN Server through CiscoCP.The tunnel comes up but I cannot pass any traffic to the secure LAN (GigEth 0/1). When the tunnel comes up, I can ping the Loopback interface and the GigEth 0/1 interface IPs.

View 21 Replies View Related

Cisco VPN :: Configure ASA 5510 As EasyVPN Server?

Dec 5, 2011

I have a Cisco ASA 5510 and a Cisco ASA 5505. I want to configure the ASA 5510 as Easy VPN Server and 5505 as Easy VPN hardware client.Using either CLI or ASDM.

View 1 Replies View Related

Cisco Switching/Routing :: 3750 IP Phone Not Registering With PBX / Signaling Server

Feb 20, 2013

I have an issue on the Cat 3750 on the voice vlan; IP Phone not registering with PBX & Signaling Server.  The ip phone hits dhcp and gets an ip address from a data scope. Data scope does have dhcp options for voice, same as voice scope so it should work but it doesnt.We removed the switchport access vlan 50 command, and left the switchport access voice vlan 51, and now the phone registers.Anything I can check on the switch to make sure voice vlan is working? Any debug voice vlan commands?The switch doesnt seem to distinguish voice and data traffic.I check dhcp and both scopes vlan 50 and vlan 51 have the same configuration.  Defautl GW is different of course Catalyst 3750 is running 12.2(25)SEE2 [code]

View 5 Replies View Related

Cisco VPN :: 5505 - Configure ASA Server And EasyVPN Client?

Apr 28, 2011

So I have three ASA 5505 firewall. my firewalls we are in the test environment. I read on the net that when you have a situation like in my company where are headquarter and two offices, i should put  in each branch office and headquarter one asa firewall and a firewalls should be configured as easyvpn.

VPN server is in headquarter and easyvpn's are in branch offices. i tried everything, but we could not configure them. maybe it's not a problem that in my test environment at my the external interfaces which have static addresses on these three firewalls, respectively serever 192.168.2.1, 192.168.2.2 and 192.168.2.3 client client. I seted firewalls by following the instructions, but does not work

[URL]...
 
I solved the problem with the server as a remote access VPN. client workstations that are on the 192.168.2.0/24 network can access a local LAN via VPN. But when you put the ASA 5505 firewall. clients on the LAN side of the firewall can not access the VPN. I use software products Cisco VPN Client 5.0.06, but when I create a connection and try to connect to get an error secure vpn connection terminated locally by the client. reason 412: the remote peer is no longer responding.

View 2 Replies View Related

Cisco VPN :: 5505 How To Change EasyVPN Head-end Server Address

Jan 19, 2012

We have a number of 5505 ASAs at remote sites all of which are configured to connect to one of two head-end servers.We need to change the primary head-end IP addresses.  At the moment devices are successfully connected to the secondary.If we issue vpnclient server i.j.k.l e.f.g.h then the device drops off the network and won't reconnect until it is power cycled.If we make the changes in ASDM using the GUI to remove the old primary and add in the new primary the ASDM says "No changes made".Devices are running 8.2 and 8.4 code and behaviour is the same.
 
how to change head-end server IP addresses without the device disconnecting and not coming back up?  According to the configuration guide the ASA should cycle through the addresses every 8 seconds until it can connect - but it doesn't seem to do this as it won't connect to the good secondary head-end either!

View 1 Replies View Related

Cisco VPN :: Sharing EasyVPN PIX515 Server And ASA5505 Client?

Nov 2, 2011

EasyVPN PIX515 server and ASA5505 client?

View 4 Replies View Related

Cisco VPN :: EasyVPN Server (Router 2911) VPN Client On Windows 7?

Oct 11, 2012

I have couple of issues with my EasyVPN server and Cisco VPN Client on Win7.
 
1: VPN Client establishes the connection, traffic flow, destination network can be pinged. After a few minutes traffic stops passing the VPN. No ping to IP or DNS names can be made. In order to resole it. Users have to re-establish the VPN again. Occastioanl it stays and continue to work.
 
2: VPN Clients don't pick the same IP address from local address pool even though I specified "RECYLE" option in the IP local pool command.
 
Configuration:

##############################################################################
 TQI-WN-RT2911#sh run
Building configuration...
 Current configuration : 7420 bytes
!
! Last configuration change at 14:49:13 UTC Fri Oct 12 2012 by admin
! NVRAM config last updated at 14:49:14 UTC Fri Oct 12 2012 by admin

[code].....

View 2 Replies View Related

Cisco VPN :: 3945E ISR Router As EasyVPN Server / Local Usernames Restrict Management

Jun 24, 2012

I am using 3945E Router as Easy VPN Server, with 15.1 IOS. On router I have bunch on usernames for VPN authentication, I want to restrict Router management access for them(ssh,telnet, http and so on).

View 2 Replies View Related

Cisco :: CIPC Getting IP Address From Data Or Voice

Jan 9, 2012

Since CIPC is isntalled in the PC, and PC definitely getting an IP address from the data IP network segment instead of the voice IP network segment, so how to gurantee the following? 1. How the CIPC registered to the CME/CUCM 2. How to gurantee the QoS for the CIPC's voice traffic since the source IP address of the CIPC is belong to the IP network segment?

View 4 Replies View Related

Cisco :: Registering 7985g With CME 4.0(3)

Apr 29, 2011

Anyone gotten 7985g's to register with CME 4.0(3)? I have seen confilicting information, some say CME wont support 7985g's but some have posted configs and say its working....anyone have personal experience? Also with the "video" option configured in telephony service, will video automatically transfer when a session is started?

I tried to get this working last night, only had 30 minutes, they didnt register, but may be a seperate issue I overlooked. I have a 3845 with c3845-adventerprisek9-mz.151-4.M.bin. I just tried to throw together a quick ephone with the mac and type 7985g but no-go.

View 1 Replies View Related

Cisco :: Phone Keeps Registering With Wrong CME?

Jan 6, 2011

I have a CME on the other end of my MPLS network. When troubleshooting phone issues i setup a phone on the CME system in question and point its TFTP server to the address of the CME router. Now, i need to point this phone to another CME but it keeps registering with the previous one no matter what i do (the TFTP server is pointed to the new CME). I have tried turning off the auto register, and i have deleted the ephone and its mac address all together but it always registers with the wrong CME.

The phone is a 7962 with a 7914 expansion module.

View 10 Replies View Related

Cisco :: Registering Panasonic KX-TGP500 With CME?

Apr 12, 2011

register Panasonic Cordless phone - model - KX-TGP500.While configuring in CME - ephone - type (the list available is for only cisco models).how can i register this new model which the CME.

View 4 Replies View Related

Cisco :: IP Phone 7906 Is Not Registering With CCM

Feb 19, 2013

I am moving an IP Phone from one subnet to another subnet.I have deleted the IP Phone configuration in call manager(System version: 7.0.1.11000-2); however, when adding the same device (same MAC address) again in the call manager, the call manager associates the phone with the old IPv4 address (even though the phone is turned off). The phone is booting up and getting a different IP address on the new subnet, and is always in the "Registering" state. The phone has the right CM IP, TFTP IP, etc. the only difference is the phone IP address and the IP address that the CM is showing in the phone device configuration. I also tried resetting/rebooting and restore phone to default factory setting but it doesn't work, i have few more devices on this new subnet that are working fine.

View 5 Replies View Related

Cisco Wireless :: Registering CAP 3502 In WLC

Nov 14, 2012

I have a Cisco Wireless LAN Controller AIR-CT5508-K9 running Software Version 7.0.98.218. This WLC has registered ten AP model 1240.Now I have configured fiive CAP3502 with static capwapp commands, when I connect the CAP-3502 in the network, in the WLC I see the status "downloading" then the CAP restart, and the console show the message *Mar  1 00:15:39.033: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER, and never the CAP3502 is registered in the WLC. [code]

View 1 Replies View Related

Cisco :: 1242AG-A-K9 AP's Not Registering To WLC 4402

Jan 1, 2007

Currently have a WLC4402 installed with 21 AP's reporting to it. The controller is running at LWAPP3 with version 3.2.116.21. The WLC was purchased prior to Cisco buying Air-e-space, and has a 36 AP license. When attempting to install additional 1242AG-A-K9 ap's, the controller will not acknowledge them. I have verified the LAN confiuration as correct, and working properly.

View 9 Replies View Related

Cisco WAN :: 7965 Off Of Remote 881 Keeps Registering Throughout Day

Jun 7, 2012

A couple of our remote users are saying that during the day, suddenly their 7965 that hangs off their 881 will start registering for 3 to 5 seconds, then it will be fine.

View 8 Replies View Related

Cisco :: 2106WLC Is Not Registering 1522AP

Oct 3, 2011

I have 2106WLC and 1522AP. when i connect AP wih controller it gets the IP from DHCP pool define in controller and then start downloading the image then comes in registerd statebut problem is that when i click on the Ap to configure then suddenly its disappear and message comes the device is not available currently. at that time i check the CLI of AP and AP again becomes in Discovery state. and start process forever again of discovery.

View 2 Replies View Related

Cisco Wireless :: 1130 AP Not Registering?

Nov 27, 2011

I know what the problemis i need to tell the AP what the mac of the switchport is but i can not figure it out because it is a CATos Switch?on a IOS  I would just use the Show interface command and use the bia but i dont know how to figure out the bia on a CATos?

View 3 Replies View Related

Cisco Wireless :: 2504 WLC And AirLAP1131AG-E-K9 Not Registering?

May 20, 2012

We have a 2504 on version 7.2.103.0 and 15 of the 1131 AG's.In short we cannot get the access points to register against the WLC, they seem to be caught up in a boot loop. They are seen on the WLC with a status of downloading, then once they have downloaded (Seen via CLI) I get an error message things I can confirm are The Country code is set to GB All ports are in Native VLAN Access points are ETSI type. It stops and restarts at syslog output DTLS-3-BAD-RECORD: Erroneous record recieved from x.x.x.x: Duplicate (replayed) record.

View 26 Replies View Related

Cisco :: Air 3602i Not Registering With 5508 Controller

Mar 6, 2012

I can not get our 3602i AP's to register with our 5508 controller which is running 7.2.103.0 code.  We keep seeing an error in the log on the WLC   "AAA Authentication Failure for UserName:c46413c08e92  User Type: WLAN USER" and on the Access Point we are seeing [code]
 
I entered the CAPWAP ap controller ip address directly into the AP so it shouldn't be an option 43 DHCP issue

View 15 Replies View Related

Cisco Wireless :: Registering AP 3500 In Controller 5508

Apr 6, 2012

how an AP 3500 get to be registered in a controller 5508??, so, i have seen a lot of information of wireles deployment guide but i haven't understood yet how the process or flow is for getting the AP to be registered in a controller 5508, what exactly basic configuration must be done in a controller for doing it?

View 6 Replies View Related

Cisco :: 5508 WLC Remote Access Points Are Not Registering

Apr 17, 2012

i have deployed WLC 5508 in head office with current 56 access points (mix of 1262N, 1141N and 1242) are regist ered and working fine, recently we extended to our remote office (connected over Layer 3 MPLS with OSPF Protocol) were none of the access points are not registering, i am able to reach to the controller from the specific VLAN and native VLAN without any issues. @remote site i have enabled option 43 and option 60 with the controller IP.
 
Number of APs.................................... 56
Global AP User Name.............................. ciscoGlobal AP Dot1x User Name........................ Not Configured

[Code]......

View 10 Replies View Related

Cisco AAA/Identity/Nac :: 1120 - Registering ACS 5.2 Instance To Primary

May 29, 2013

When attempting to register an ACS instance to a primary (via System Administration -> Operations -> Local Operations -> Deployment Operations), I receive the following error as a popup in my browser:
 
"This System Failure occurred:  /opt/CSCOacs/db/acs.crt (No such file or directory). Your changes have not been saved.Click OK to return to the list page."
 
I had 2 ACS 1120 appliances clustered, 1 suffered a hardware failure about a year ago so I replaced it with a VM. That one is now the primary. I'm now wanting to replace the secondary instance (the remaining 1120 appliance) with a VM as well. I removed the current appliance from the network, installed the VM using the same IP address, and attempted to register. It failed as per the above error. After trying this a number of times, I then decided to return the 1120 appliance to secondary status and attempted to register it with the same results as above.

View 3 Replies View Related

Cisco Wireless :: Access Points Which Are Not Registering With WLC 2500

May 1, 2013

We have a couple of Access Points which are not registering with WLC 2500. I followed-up on the two LAPs in the dorm.  They were cycling through red, amber, green, indicating they were trying to join the controller but could not.
 
Recently, we have changed our IP Schema for the Wireless Devices and I believe there is an IP Conflict between APs and WLC. Earlier APs were cofigured with Static IP Address assignment, thus they can't change their IP Address.
 
how to reset the Access Point? I know we can hard reset them by pressing the Mode button manually.
 
Is there another way via which this can be done witout removing the Access Points from their enclosures?

View 7 Replies View Related

Cisco Wireless :: AP541N Is Registering Phone With A UC500 System

Feb 14, 2011

I know the AP541N can support the 7921 phone but all the documentation I've read assumes the AP541N is registering the phone with a UC500 system. I was curious if there would be any problems using this AP with a 7921 at a remote site (881SRST gateway used). It would be tieing into a CUCM BE system at the central office.

View 0 Replies View Related

Cisco VPN :: ASA 3750 IPSec Client Registering Home IP Address

Aug 30, 2012

I installed some Nexus 5k to replace there 3750 and added dynamic routing. Well after working out most of the issues with most of the stuff, there is one issue that still remains. From what i understand (I have not made it abck to the site yet) when there users connect to VPN with IPSEC (they only use the thick client) they register there local ip address to DNS and thier VPN assigned IP address. At this time I dont have access to the configurations.

View 1 Replies View Related

Cisco Switching/Routing :: 4507 - MAC Address Registering On Different Port

May 22, 2013

I am having an issue where MAC addresses from my user PC's are registering on different ports than the ones they are plugged in to.  I have my PC's plugged in to my Cisco phones (most of which are 7941's), and then patched back to my switch, (4507 or 4006).  The issue is that a user will be working fine, they will have both their PC and Phone MAC's registered on the correct prot and then with out intervention the PC MAC addresses will register itself with another physical port and the user will pull a 169.x.x.x address and have not access to the network.  This is happening to multiple users all of which are hardwired.  Port security is configured to allow 3 MAC's, obviously if I change that to 2 it will not allow an incorrect MAC's to register with that port, but I would like to know why this is happening.  Both the 4507 and 4006 have been up for 1 year and 33 weeks.  The fix has been to find out where their MAC has registered it self, unplugg that PC from the phone, and let the port security aging time (2min) clear all MAC's from the port.

View 3 Replies View Related

Cisco Switching/Routing :: 7911 - IP Phones Stuck In Registering

Nov 18, 2012

We have a couple of 7911 that get stuck in Registering, each monday. During the week, no user reports the problem. But after the weekend, we get ready to hear complaints from our collegues. The same phones often experience this issue, although the other phones report no problems. The problem is temporarily solved when we issue "shut/no shut" on switch ports.

phone firmware version: SCCP11.8-5-2S
Interface configuration:
interface FastEthernet1/0/27

[Code].....

View 1 Replies View Related

Cisco VPN :: EasyVPN To 2821 Behind Another Router

Nov 30, 2012

URL What changes are needed to the 2821 config that is behind another Cisco router?  And what static ports should be opened on the MAIN Cisco router that is in front of the 2821?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved