I have an iPad2 and a Belkin F6d4230-4 wireless router. I no longer have a computer. If I reset the router can I setup the network without having to hard-wire the router to a computer first?
View 3 RepliesTrying to connect new iPad with Belkin router but have lost the password.
View 5 Replies View RelatedI'm having trouble connecting to my Belkin router wirelessly (Wired works fine). I try to get to the IP address (192.168.0.2 and every other version of that) but it does not connect. On the router only Security, Wired, and Router are lit up; Wireless, Modem, and Internet are dark. I have reached the end of my limited computer capabilities trying to fix this problem myself.
View 1 Replies View RelatedI cannot get my belkin n150 wireless router to connect to my laptop or ipad - wireless connection was working but stopped - so i attempted to re-configure the ip protocols on the router using the 198.168.2.1/ password - changed the ip setting on the belkin page but did not reset or set address (DHCP).
View 1 Replies View RelatedF5D8233-4v3 router. Internet is fine (wired connection) but I cannot connect wirelessly to any other device.
View 3 Replies View RelatedI just bought a Play N600 F7D8302. I swapped out my old Belkin router for this one. Easy swap. I went in to the 192.168.2.1 address, to look at the current wireless settings. I saw an option to use it as an access point. Not sure what I was thinking when I checked it off, but now I can't connect wirelessly, and I cant get onto the settings page again, via 192.168.2.1. My IP address has changed, and is now 50.135.82.220. I've unhooked everything and hooked it back up. I pushed the reset button on the back. I don't know what to do. How do I get it back to the way it was before I got my hands on it?
View 2 Replies View RelatedI have a desktop computer connected to a modem and a wireless Belkin router. I bought a Belkin Surf&Share wireless USB adapter so that I could move the desktop elsewhere in the house and still connect to the internet. When I disconnect the computer from the router, the wireless light on the router turns red and I can't connect.
View 1 Replies View RelatedAll the lights are on except the wireless one. Wireless network not locatable by laptop even when sitting next to router.
View 19 Replies View RelatedMy computer sees my network, but I can't connect to the internet wirelessly. If I plug in the Ethernet cable from the modem I can access the internet. So, I've narrowed this down to something with my router.
OS: WIN7
Router: Belkin N750 DB N+
Steps taken:Modem and router have been shut down and restarted.Router has been returned to factory settings and reconfigured.Validated with my ISP there are no issues with my internet service. Router software has been uninstalled, reinstalled I do not use McAfee. I've run a full virus scan, a full malware scan and just for good measure, a defrag. I've checked my firewall.
I can get on the internet and surf just fine but when i go to maps or Gas Buddie, or check in with Facebook it says" my device can not be located. Are location services turned on on the device." I have checked on my ipad and location services are on, on everything. I had no problem with the other router I had. I also have a Sprint Airave connected to my internet, but again i had no problem with the other router. The router is definitely faster than my old one and set up was easy but its very frustrating to not be able to find my location.
View 1 Replies View RelatedCan the drivers and network monitor be downloaded on an ipad? I have the 300mbps share router. Model # f7d7302.
View 1 Replies View RelatedDoes my Belkin F5D8236-4 ver. 1 (firmware 1.00.02) router support Apple's Bonjour print application. I can't get my iPhone or iPad to recognize my new HP Photosmart 7520 wireless printer which is connected to my network through my router.
View 4 Replies View RelatedHow do I connect IPAD to Linksys router WRT160n?
View 2 Replies View RelatedWe have just installed the E1200 wireless router. We are able to access the internet from our home computers, however we cannot get the IPAD connected. When we try to find our wireless network to connect to it doesn't display yet our we can still see our neighbors wireless networks.
View 1 Replies View RelatedI have a WRT320N router with firmware version 1.0.01 build 008. I just got an iPad and while it can find my router, I can't access the WiFi when I enter my password. I can use the router with my laptop so I know the connection and password are ok.I've seen two administrators on here suggest the same thing. And one person responded that it worked. The identical directions were:
Try changing some advanced wireless settings on the router.Connect the computer to the router with the Ethernet cable. Open the setup page of the router.Click on wireless tab and set the configuration view to manual. Change the wireless channel to 11. Save the settings.Go to wireless tab and click on Advanced wireless settings.Change Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.Try to connect to the wireless network again and see if that works.
1 - I think my computer already is connected to the router with the Ethernet cable - I mean there is an Ethernet cable attached to both my computer and my router - in slot 1 on the router
2 - the only thing I know how to access is the Linksys EasyLink Advisor. What and where is the setup page of the router?
What should i do ? Reset ? How ? maybee i did not set the cable properly ( what is an ethernet cable ? ) the one i have is a short cable with what looks like telephone jacks at either ends. one end is plugged in my comcast modem and the other into my mini mac.
View 1 Replies View Relatedi got my ps3 & xbox to connect it was easy but when i go to connect my iphone it doesnt even let me put my password in it just says"cant connect"?
View 3 Replies View RelatedI recently connected E1500 to time wanrner cable modem for my home. 3 laptops work fine, but iphone and ipad can not connect to wireless. But iphone and ipad connected to linksys guest automatically.
View 4 Replies View RelatedRegion : UnitedStates
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3,14.2 build 120822 rel.40902n
ISP : Sprint
Been working on this for about a week now, still no success. I confirmed I am using the latest update version/build.Trying to connect to my Ipad. TPLink Software says Identified, but only goes toward "Connecting" and never connects.All the ISP/Subnet numbers are "0". Set to 3g/4g only setting. Tried with security password and with security disabled.Customer support asked me to call Sprint to confirm dial number is #777 and that is confirmed. Sprint also confirmed APN is not needed to connect to a wireless router using a USB modem (this is a U600, which is on the TPLink compatable list). There is some internet posting that says the APN for Sprint is internet.com but I tried this too, and it still wont connect.
I don't want to allow any Guest access to my network, but I do want to connect my iPad to my network. I've successfully added another computer to the network but the router setup seems to want the iPad to connect only as a Guest .Is there a way to treat my iPad as another computer (not as Guest) so that it my network recognizes it in the same way it recognizes the second computer (without entering a password)?
View 1 Replies View RelatedI have an E4200 wireless router which is connected via USB to my Canon MX 308 printer. I am able to print from Windows computers that are connected to this router (via WiFi of course). My iPad 2.0 is able to connect to the internet via the router. However I am not able to print content from my iPad via the E4200 router (via Wifi using Cisco Connect software).
View 1 Replies View RelatedMy iPad cannot connect to my network wireless through WPA2 using router E4200 the way my Macbook is connected. Only using guest access i can get internet contact. Is this a known problem with this combination and/or is it meant to be, that only guest access gives an iPad connection?
View 6 Replies View RelatedCurrently i have one main router in my house connected to the phone line. what i want to do is add another standalone router which will wireless connect to my main one.i want to connect my computer to the router wired then that router connects to the main router wirelessly.what is this method called ive seen things like wireless repeaters and wireless bridge.
View 6 Replies View RelatedYesterday everything was working fine, but when I got home today I couldn't connect to my router. I tried connecting on my computer, my mac, and my netbook ALL couldn't even find the SSID. I directly connected my mac and netbook to my modem and was able to connect to the internet, so I know it's not an ISP problem. I then re-connected the WAN cord from my modem to the back of my Netgear Wireless-G Router WGR614V10. All the lights come on but I still can't find the router when I tried connecting wirelessly. When I connect an Ethernet cord to a LAN port on the router, I can get connection.
View 6 Replies View RelatedI can't connect via wifi to my router, but can connect to the internet with an ethernet cable. However, my other computer connects via wifi without problems. I've gone through my troubleshooting and the wifi light is on, so that's not the issue. I also updated my driver (says it's working fine) and even tried to uninstall and reinstall it. I am not sure what else to do. If I try to connect via wifi though, the computer recognizes all the available networks, including my own, but just won't connect. It says a cable is unplugged (which at that time it is, because it's supposed to connect wirelessly).I have a HP Pavilion dv6-3147sb Entertainment notebook, and it uses Windows 7.
View 14 Replies View RelatedI have purchased a Sony bravia tv with built in wireless. However I am unable to connect the tv wirelessly but I am able to connect wired.I have tried changing various settings on the livebox including taking off the firewall and changing the channel nmber (frequency) and still unable to connect. The tv does pick up the SSID of the router but the router just doesn't seem to release an IP address within its range as I keep getting a 169.x.x.x instead of 192.x.x.x.
View 8 Replies View RelatedThis may seem blatantly obvious to some of you, but is it possible to connect a wireless router wirelessly to a wireless dsl modem. Due to geographic issues in the building, I would like to prevent running a cable from A to B if possible.
View 4 Replies View RelatedI have a BELKIN F5D8235-4 V2 wireless router and I am trying to hook up my Western Digital My Book Essentials 2.0 1 TB hard drive to gain access wirelessly through the router. I have it connected to the router via USB but do not know how to access the drive. I have tried mapping a new network drive, but it is not listed as a connection. how can I access the drive.
View 1 Replies View RelatedI got f9k1001v3 (n150) router, My problem is that I can't upload photos from my xperia p wirelessly. I tried to other connections (wifi) even on 3G and I can upload on instagram or fb.
View 3 Replies View RelatedCurrently my network is set up so all machines are on the same workgroup.The server (Server 2008) is also part of this workgroup and has shares set up to only allow access if a client PC is logged in as the same user/password as the server uses.I want to set up a domain on the server so I can install Exchange, but if I do this, will my Workgroup PC's lose access to the server shares?
View 5 Replies View RelatedI just got a TL- WR740N router and somehow managed to configure it using my girlfriends Acer Aspire One Happy netbook.The internet works fine when the netbook is connected to the router via cable but it can't connect wirelessly to the network I have created. At first some massege appeared saying that there are 2 identical IP's and there is a conflict or something like that. Now it just stops trying to connect to the network. I can connect with my own laptop tho.
View 3 Replies View RelatedMy desktop (that I am currently on) connects fine to the router but I can't get my laptop to wirelessly connect to the router.. it finds it and sometimes it says that it is connected but the connection is broken and can't be repaired. The wireless on the laptop itself says it is also loggen in. I really don't know what to do.. Laptop is an Acer Aspire One Windows XP model number ZG5 Router is Linksis by Cisco model number WRT120N It is Encrypted WPA2 I do have firewalls I am just really confused.. It did connect for like 10 seconds and then nothing.
View 3 Replies View RelatedMy laptop only connects wirelessly if it's in the same room (actually, at the same desk) as the router. I just installed a new router and that did not solve the problem. I took the laptop to a pc repair shop and it connected wirelessly there withouto a problem; I also took it to Best Buy and was able to connect wirelessly there as well). So, problem solvers figured it was the router (which was quite old)I've now replaced the router but still can't connect wirelessly unless I'm in the same room as the router!
View 1 Replies View Related