I can't connect via wifi to my router, but can connect to the internet with an ethernet cable. However, my other computer connects via wifi without problems. I've gone through my troubleshooting and the wifi light is on, so that's not the issue. I also updated my driver (says it's working fine) and even tried to uninstall and reinstall it. I am not sure what else to do. If I try to connect via wifi though, the computer recognizes all the available networks, including my own, but just won't connect. It says a cable is unplugged (which at that time it is, because it's supposed to connect wirelessly).I have a HP Pavilion dv6-3147sb Entertainment notebook, and it uses Windows 7.
I had the router working fine then last night for some reason it dropped 2-3 (all of them currently on) internet, while online.I can connect wireless just fine to the router but get no internet, when i plugged into the router directly i still go internet, but when i connect the modem directly into the laptop i get internet so it is not the modem. I have tried to reboot the router and modem to no avail.i can access the routers page wirelessly and change stuff but just don't get any internet and the signal strength is excellent.
My friend's wireless internet just suddenly failed last night. She was watching Youtube videos, but had to do something, so she closed the window. When she came back, she couldn't connect, and was given an error, something about user connectivity.Her wired connection is still working.
I just bought a brand new computer and I plug everything in, including the ethernet cable used on my previous computer. This cable is plugged into a wireless router, which in turn is plugged into a modem giving it Internet. So yes I understand this part. But on my new computer it says "Not connected, and no connections available." I then plug the computer directly into the modem, I in turn receive Internet beautifully and quite quickly. But I cannot keep it like this because I need the wireless router for other devices. So I set everything up back the way it was and my other devices work! Even other plugged in one's that aren't wireless, but still not this new computer.. What do I do
All the light indicator of the router are working as they should,however there will be no internet connection.This happens about once a day(rest of the day the internet works fine),I then have to switch off the router,wait for a good amount of time and then switch it back on and then internet will work fine.I use the router for many devices like my windows 7 laptop,an ipad,iphones.
As the title says I was using the internet one evening, turned it off my laptop which is an Acer 5332, the next day turn it on only to find I am disconnected from the home router and can't connect to it. My Ipad is able to connect to it without a problemI tried connecting to a friends router without a problem. I uninstalled the network adapter and restarted my pc only to find that it couldn't successfully install upon restart however I'm still able to connect to other routers except the one I want
I'm having trouble connecting to my Belkin router wirelessly (Wired works fine). I try to get to the IP address (192.168.0.2 and every other version of that) but it does not connect. On the router only Security, Wired, and Router are lit up; Wireless, Modem, and Internet are dark. I have reached the end of my limited computer capabilities trying to fix this problem myself.
Currently i have one main router in my house connected to the phone line. what i want to do is add another standalone router which will wireless connect to my main one.i want to connect my computer to the router wired then that router connects to the main router wirelessly.what is this method called ive seen things like wireless repeaters and wireless bridge.
Yesterday everything was working fine, but when I got home today I couldn't connect to my router. I tried connecting on my computer, my mac, and my netbook ALL couldn't even find the SSID. I directly connected my mac and netbook to my modem and was able to connect to the internet, so I know it's not an ISP problem. I then re-connected the WAN cord from my modem to the back of my Netgear Wireless-G Router WGR614V10. All the lights come on but I still can't find the router when I tried connecting wirelessly. When I connect an Ethernet cord to a LAN port on the router, I can get connection.
I have purchased a Sony bravia tv with built in wireless. However I am unable to connect the tv wirelessly but I am able to connect wired.I have tried changing various settings on the livebox including taking off the firewall and changing the channel nmber (frequency) and still unable to connect. The tv does pick up the SSID of the router but the router just doesn't seem to release an IP address within its range as I keep getting a 169.x.x.x instead of 192.x.x.x.
This may seem blatantly obvious to some of you, but is it possible to connect a wireless router wirelessly to a wireless dsl modem. Due to geographic issues in the building, I would like to prevent running a cable from A to B if possible.
Currently my network is set up so all machines are on the same workgroup.The server (Server 2008) is also part of this workgroup and has shares set up to only allow access if a client PC is logged in as the same user/password as the server uses.I want to set up a domain on the server so I can install Exchange, but if I do this, will my Workgroup PC's lose access to the server shares?
I just got a TL- WR740N router and somehow managed to configure it using my girlfriends Acer Aspire One Happy netbook.The internet works fine when the netbook is connected to the router via cable but it can't connect wirelessly to the network I have created. At first some massege appeared saying that there are 2 identical IP's and there is a conflict or something like that. Now it just stops trying to connect to the network. I can connect with my own laptop tho.
I have an iPad2 and a Belkin F6d4230-4 wireless router. I no longer have a computer. If I reset the router can I setup the network without having to hard-wire the router to a computer first?
My desktop (that I am currently on) connects fine to the router but I can't get my laptop to wirelessly connect to the router.. it finds it and sometimes it says that it is connected but the connection is broken and can't be repaired. The wireless on the laptop itself says it is also loggen in. I really don't know what to do.. Laptop is an Acer Aspire One Windows XP model number ZG5 Router is Linksis by Cisco model number WRT120N It is Encrypted WPA2 I do have firewalls I am just really confused.. It did connect for like 10 seconds and then nothing.
My laptop only connects wirelessly if it's in the same room (actually, at the same desk) as the router. I just installed a new router and that did not solve the problem. I took the laptop to a pc repair shop and it connected wirelessly there withouto a problem; I also took it to Best Buy and was able to connect wirelessly there as well). So, problem solvers figured it was the router (which was quite old)I've now replaced the router but still can't connect wirelessly unless I'm in the same room as the router!
I have a network that starts with a Linksys wireless router (DSL connected here) then it goes to a Netgear switch (computers connected here) and then a Netgear wireless router for an iMAC to connect to. I can't see the last router or the iMAC on my Win 7 machine? when I map network I get an error message about an incompatible device.
I have the firmware 2.10NA. In my home we have about 4 laptops and 4 smartphones connecting to this router wirelessly and 3 of the laptops often lose connection for hours. We have tried unplugging the router and plugging it in again and factory reset and also resetting it through the IP address but the connection doesnt come back. Recently it has gone out for about 3 hours now. Also the wireless LED icon on the router constantly blinks is this normal? On the laptops where theres no connection it says limited connectivity. Is it possible that there is too many devices connected to the router or something. or could this be a problem with the laptops and not the router?
I just installed an E1200 router and used the CD to take care of the software work. I Cannot connect to it by WiFi. I still have to use a cable connection.
I have a WRT54G2 router with a desktop wired to it. The desktop is mine and my roommate wirelessly connects with her laptop and has been doing so no problem for about 6 months (ever since we got the router). On Christmas Eve, she was connected, went out, came home and found she'd lost her wireless connection. Now she can't get it back.I can still get online on the desktop.i've power cycled to no avail. What is weird is sometimes she will click on the list of available networks (so she can choose which she wants to connect to) and mine WILL be there, other times it will NOT. If she does happen to catch it at a moment when my network is there, and she tries to connect using the passphrase, it says "Trying to connect" or something to that effect, for like 3 minutes and then nothing happens. Also, not that I would need to, but if I go to "connect to" on my PC (as if I were looking to choose a network to connect to), my network name doesn't always show. It is random. Sometimes it does not even show when I go to "Networks" on my desktop.
i have never managed to work out how to connect wirelessly , step by step to do this? is there any reason why the d link router might be incompatible with this model of laptop?
I have just bought a brand new Sony Vaio laptop VPCEH2. I have tried to connect wirelessly to my Netgear router (DG934G). The router and broadband is supplied by Sky. The laptop is running Windows 7. The router is sending a wireless sending fine to our desktop and two smartphones but the Vaio is unable to connect.
The Vaio finds the signal which is says is excellent but does not connect. Using an ethernet cable the internet connection is fine. I have been on the phone to Sky for nearly 2 hours across two nights and they have given up. We have tried setting up a new router password, disconnecting and reconnecting, establishing a connection in the Network and Sharing Cente using WPA security with no joy. I asked them if the router needed a firmware upgrade for Windows 7 and they were adamant that it did not - the firmware version is currently V2.02.44. I have checked the Windows 7 compatibility listings for Netgear routers but couldn't find the DG934G (or the DG834GT - which I believe is a newer version), listed.
The funny thing is that when Sky create a wireless connection in the sharing centre is did work for around 30 seconds where I was able to access around 5/6 webpages. The browser then stopped working and the connection was lost (with yellow warning triangle across the signal to bottom right of screen). Another thing to note was that Sky originally blamed the fault on a McAfee update. I looked into this and deinstalled McAfee and even spoke to them for a while and they confirmed that it had deinstalled and did some other tests and said it was definitely not their software causing the problem.
Im running a linksys wireless router, WRT54G V6 with firmware 1.02.8. It worked before I moved after I moved I can't connect via wireless. hard line works. i've tried resting to factor, i've tried not using ses, not using custom ssid. I've rest it like 5 times retarted the computers. I've hit the little cisco systems button on the front, this makes it work for a few minutes. When I hit the button it will go out then come back on white, and blink around 1-2 blinks per second, it will do this for maybe 1-2min. then stops and changes back to orange. and i get nothing from it. the WLAN light is on like it's working but I cannot detect it with my desktop or laptop, can i can detect 3 other routers around me. I've tried pretty much everything i know to do, tried flashing it, updating, about the only option i have left is throwing it out the window.
I'm using E4200 with latest 1.0.02 firmware and found I can not connect to VPN with my iPhone4 by WiFi.Googled a bit and found it's a common problem for Cisco routers when wireless devices can not connect to VPN but wired ones connects with no problems.\
I have a linksys WRT54GH wireless router running firmware v1.0.01 build 001.It's setup with DHCP.My desktop computer is connected to the router via cable.I also access the connection using my laptop, via wireless.The problem is that after I start using the desktop (wired connection), I can't connect from the laptop using wireless. It happens every time. I then turn the router off and back on again. After this procedure I can successfully connect from both the desktop (wired) and laptop (wireless).
A couple nights ago, my wireless router (Linksys BEFW11S4 ver4) just stopped letting me connect to the internet. All the lights were still flashing as they should, I could still go to the setup page, I just could not connect to the internet, both through wired and wireless. I could connect straight through the modem though.
So I decided that since the router was probably over a decade old that maybe it was just its time, and I bought a new one (E1000). I connected it, and still could not connect to the internet. I then did some internet searching and found this [URL] and I followed what was mentioned in post 10 (MAC address clone and changing local IP). Now I can connect through the wired connection and I rejoiced thinking I solved it.
Then I checked my laptop and it won't even connect to the router. It sees the router, but when I ask it to connect, it just says it can't. I decided I was too exhausted to try searching and fixing it on my own and if I tried I'd just end up breaking something out of frustration.
I have a WRT160NV2 connected to Internet through cable and wanted to connect it wirelessly to a WRT120N that is far from it in order to expand its signal. Is it possible to do it wirelessly or the only solution is to connect them with cable?
I currently have an E1000 connected to my cable modem in my living room. It provides wireless access to my whole household.
I have a set of computers I want to have set up as a lab on their own router and have a WRT54GS available for me to modify.
The WRT is in the dining room (office) and the cable modem/E1000 are about 45 feet away.
I want to set up the wireless environment on the E1000 as 192.168.1.1-24 and the wired network as 192.168.2.1-24 with the wired network being able to wirelessly connect to the wired so all the machines in the house can see my server and other machines.
I have two E1200 routers, one of which I purchased last night. My table and netbook are only connecting wirelessly at 65Mbps max. These same devices connect to a WRT120N router at 150Mbps though.
I have the settings on the E1200 the same as the WRT120N.
So why is the the E1200 only connecting at 65Mbps then? Changing channels and MTU and beacons has no positive effect.
