Cisco Routers :: RV-180W Certificate Errors With URL Blocking Feature

Jan 5, 2013

I like to use "URL Blocking" with keywords in the firewall properties. When I activate this feauture, I get errors from the router certificate when I browsing to any site in the Internet. Is there a way to manage this problem without using a public certificate?

RV180W-Firmware-1.0.1.9

View 8 Replies


ADVERTISEMENT

Cisco Routers :: RV042 Browser Certificate Errors When Logging Into Web-based Gui

Jan 2, 2012

I have set the RV042 up for QuickVPN access.  The router config recommends turning HTTPS on in the firewall when using QuickVPN.  The side effect to this is any web browser throws me certificate errors and warns me not to continue logging in to the router's config.  How do I fix this so the browser does not throw these messages?
 
Router is Linksys-branded, using latest firmware for this hardware (1.3.13.02-tm)

View 12 Replies View Related

Cisco Routers :: RV 180W - Application Connecting To Apple TV Using Wireless Network?

Feb 8, 2013

i have issue for Remote App to connect to the Apple TV using the Wireless network setup in my 180W.My wired Mac is able to connect to wireless connected Apple TV but my i phone (4, 4S and i Pad) are not able to connect to apple TV.

Do I have to enable some setting for this to work. It used to work in my very old Buffalo router with tomato firmware.
 
If I connect the Apple TV to wired network it works fine. Instantly it shows up in i Phone Remote app, but not if its on wireless network.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ISE And SHA256 Getting Many Certificate Errors

Mar 1, 2012

I got many certificates errors. When ISE Server tried to retrieve CRL: CRL verification failed - possibly signed by wrong or unknown CA,When client tried to connect using EAP-TLS: X509 decrypt error - certificate signature failure.

View 2 Replies View Related

Cisco Routers :: RV 180W - Connect IPhone / IPad Using PPTP To Home Network?

Jan 31, 2012

My use case is very simple I want to connect iPhone/iPad using pptp to my home network. I purchased the 180W and looks like I am not able to connect mobile devices to it. My Setup is simple I have ST536v6 (firmware 7.4.4) modem in bridge mode and Cisco RV 180W connect to my ISP using Ppoe. I followed the Admin guide and created the pptp user. If I connect from internal network it connects but when I try to connect the device from WAN it just does not work.
 
Cisco RV 180W
Firmware Version:1.0.1.9

View 7 Replies View Related

Cisco Wireless :: 5508 - Virtual WLC - Certificate Errors

Sep 13, 2012

I have just setup a vWLC for lab purposes and it´s up and running. I have a few used 1131 LAP:s that tries to join the AP but I just get DTLS certificate errors like these:
 
*Sep 14 13:25:27.229: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Sep 14 13:25:27.258: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Sep 14 13:25:36.198: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Sep 14 13:26:41.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.105 (code)
 
These AP:s (I have tried 2 so far) have earlier been in use connected to a cluster of 5508:s.

View 19 Replies View Related

Linksys Wireless Router :: WRT160Nv3 - Security Certificate Pop Up Daily With Errors

May 15, 2012

My issue occurs on ALL of my home computers (MacBook and iMac using wi-fi) and ALL of my browsers (Safari, Firefox, Chrome).The problem:- Security Certificates: They pop up daily for Facebook mostly, but also Twitter. I will click Continue, which takes me to...- 404 Error/Page Not Found Error: After the Certificate error mentioned above, this happens. Mostly to YouTube. It will stay like this for a few hours. I've cleared cache, rebooted, etc. etc. Nothing works.- Images turn into little blue boxes with a question mark in them. **When this happens, it's an indication that a Certificate box will pop up out of the blue.- Even on Google.com, it will say: Invalid URLThe requested URL "/", is invalid.Reference #9.df260e6b.1336506889.420cf4fSo what can I do? It happens on both my Macbook Pro and iMac - both connected wirelessly to a Linksys router/cable modem. The router is Wireless-N Broadband Router WRT160Nv3 with Firmware Version: v3.0.02.

View 1 Replies View Related

Cisco Wireless :: Output Errors / Transmit Discards And Big Buffer Errors On 1121 AP?

Sep 13, 2011

I have a AIR-AP1121G-A-K9 running c1100-k9w7-tar.123-7.JA2 (Autonomous)We have monitoring setup with Orion NPM and we consistently see output errors, Transmit discards and big buffer errors The users at the site have not reporting any issues but was wondering how to prevent these or are these normal?What causes the output errors on Wireless Radio ? How to troubleshoot further ?
 
Radio0-802.11G
Total Output Errors         0              47749
Small Buffer Misses
4 misses
139 misses

[code]....

View 1 Replies View Related

Cisco Routers :: RV042 Out Of Memory Errors On New Firmware

Sep 20, 2011

The entire "incoming log table" is just full of this!  It's all the same!  This is on the current firmware 4.0.4.02Sep 20 12:49:35 2011KernelOut of memory: Killed process 5385 (iptables). Sep 20 12:49:39 2011KernelOut of Memory: Kill process 5387 (iptables) score 591 and children. Sep 20 12:49:39 2011KernelOut of memory: Killed process 5387 (iptables). Sep 20 12:49:43 2011KernelOut of Memory: Kill process 5389 (iptables) score 591 and children. Sep 20 12:49:43 2011KernelOut of memory: Killed process 5389 (iptables). Sep 20 12:49:48 2011KernelOut of Memory: Kill process 5391 (iptables) score 591 and children. I see no one has a clue.  Anyway, added a copy of the log file.  It's just streaming out errors.  Serious bug in the new firmware.

View 1 Replies View Related

Cisco Routers :: RV042 V3 Web Filter Feature?

Jan 10, 2012

We are currently installing RV-042 V3 Dual WAN VPN Routers for a Customer with an HQ Office & 3 Branch Offices. The Customer recently requested to use the WEB Filter feature available in the RV-042 V3 Router to do the followng : -  " Block all the HTTP Traffic Except for the company Website " We tried all the Combinations between " Access Rules " & " Content Filtering " available under the " Firewall "  but we always reach the result that either to Allow ALL HTTP Tarffic to All Websites or to Block ALL HTTP Traffic.
 
how to Block all HTTP Traffic except for certain URL ( Using the URL Name NOT the IP Address ).

View 3 Replies View Related

Cisco Routers :: RVS4000 VLAN Feature Buggy?

Jan 1, 2010

I bought a RVS4000 Router last week. I configured two VLAN's (beside of the default one), VLAN ID 120 and VLAN ID 130. I configured an IP in the LAN section for both of them (192.168.120.1 and 192.168.130.1).
 
I then configured port 1-3 to be in VLAN ID 120 (Untagged) and port 4 to be the Trunk (VLAN ID 120 Tagged and VLAN ID 130 Tagged). The port 4 I connected a Cisco SLM224G. There I configured these two VLAN's too, and configured the uplink port as Trunk as well. The two network seem to be properly switched: I have access to 130 Hosts directly on the VLAN ID 130, and the other VLAN ID 120, I have access on all hosts connected to that VLAN ID as well (both, on the switch and the three ports on the router). On Layer 3, the RVS4000 is configured to route between the VLAN's. But I cant ping hosts on the other network! I configured the Router to be the default gateway... I think the source of that problem is the next one:

I can't ping from the Routers Maintainance Page to a host connected on Port 1-3 of the Switch (which is configured as VLAN ID 120 untagged). I reseted the router, and tested this simple use case again: Created two VLAN's, defined Port 2 to be in one of them, setted the IP's properly (192.168.120.1 for the Router on that VLAN), but stil, I cant ping from the Router to Host on that VLAN (Router=>192.168.120.10)! The other way around works (Host=>192.168.120.1)
 
The Routers Configuration:

WAN: PPPoE (works)
LAN: VLAN ID 1: 192.168.1.1 no DHCP
VLAN ID 120: 192.168.120.1 no DHCP
VLAN ID 130: 192.168.130.1 no DHCP

[code]....
 
Wiresharks shows me no ARP requests on that interface too... The product seems not to work porperly when I configure a port to be in a VLAN untagged, and try to ping to a host connected to that interface.
 
I have Firmware 3.1.0.0 (Website says 3.0.5.0 is the newest...?)

View 7 Replies View Related

Cisco Routers :: RV042 Multiple Subnet Feature

Sep 27, 2012

I'd like to set each individual LAN port with different address i.e. LAN 1 192.168.1.1 and LAN 2 10.1.1.1 instead of using the multiple subnet feature and having all ports replying for the addresses created.

View 3 Replies View Related

Cisco WAN :: 2691 And 7604 To Play With AutoQos Feature Via Routers

May 21, 2013

I have router Cisco 2691 and Cisco 7604 and want to play with AutoQoS Cisco feature. But on both there is no such command But why?

View 1 Replies View Related

Cisco Routers :: RV220W - Feature Request - IPv6 Firewall?

Jan 19, 2012

At this moment (firmware 1.0.3.5) the router has no IPv6 firewall and therefore when used in a typical dual stack IPv4/IPv6 network it has no protection regarding IPv6 traffic. Hopefully this will be fixed with a firmware update before the World IPv6 Day on the 6th of June 2012.

View 1 Replies View Related

Cisco Routers :: DMZ Feature Of Small Business RV220W Not Working?

Dec 23, 2011

I have been trying to configure a local DMZ on our network with the Cisco Small Business RV220W router, running the latest 1.0.3.5 firmware but it doesn't seem to be fully functional? Does the DMZ feature actually do anything at the current state of this router? Because when I tried to DMZ host a computer on our local network I still had to manually port forward different applications in order for people to reach it from WAN.
 
For instance when trying to host a game session, utilizing TCP port 7777 it didn't matter whether I had enabled DMZ or not, I was still required to manually port forward the port to the DMZ IP-address. 
 
Doesn't this defeat and eliminate the whole purpose of the DMZ feature in the first place?

View 3 Replies View Related

Cisco Routers :: RV180W - Outnumbered Errors And Continuous Lost Of Internet Connectivity

Apr 19, 2013

Looking for a SOHO device that could accomplish not only to connect people from home to Internet, but also to let me remotely access my work stuff (from my home office), RV180W sounded great and really cost effective. I could connect to Internet, FROM Internet, separate home, work and guest VLANs, all in just one device... sounded just GREAT! Bought one but (unfortunately) I have to say I'm quite disappointed with its performance, outnumbered errors (how many!) and continuous lost of Internet connectivity (can't stay a full day without one).I've searched a lot (not only here) and tried many things, listing some:

- Upgrading firmware (now v1.0.2.6): done several times, once with nothing connected to the router besides a local wired laptop, to ensure integrity
- Resetting to factory defaults and performing a "clean configuration", from scratch (done several times)
- Disabling Firewall functions (once all of them)
- Checking the real need of every option and making sure I had just the ones I needed configured
 
I have (in a very "consistent" way) the following problems:
 
- Poor performance (it's clearly much better when I directly connect to the cable modem's WiFi OR to another router connected to this cable modem). I could say that it seems to have 50% of the performance I had with my CISCO/Linksys E4200 and Netgear "elder" routers.
 
- Persistent disconnections / resets: Sometimes it happens only with wireless, sometimes it looses the "Internet forwarding capability", retaining the local wireless connection (to other devices), sometimes it seems to make a full reboot (including a new DHCP request to cable modem). In a day this happens several times, I'd say from 3 to 15 times, depending on the day (couldn't figure out why).
 
CPU utilization is always shown as being 100%, what sounds amazing, because:

- There are usually just 4 wired connections (3 storage devices + 1 Desktop) and at most 5 wireless connections (including my laptop connected to the main VLAN and 3 Android devices and 1 "guest" laptop connected to GUEST VLAN)
- The utilization % remains when I have jut one laptop performing Internet browsing and nothing more
- VPN wasn't enabled yet (and it will be, as I want to remotely connect to my home office) [code] ......

View 1 Replies View Related

Cisco Routers :: RV220W To Add Feature Release And Renew To Wan Dhcp Client

Oct 19, 2011

Can add feature "release" and "renew" to wan dhcp client? Is it WOL not possible in RV220w? i tried forward broadcast magic packet from wan side, change broadcast IP and through VPN tunnel (PPTP & IPSEC)...got failed i change from draytek 2130n to rv220w, 2130n much better. except SSL VPN.

View 2 Replies View Related

Belkin Routers :: N750 DB - How To Utilize Dual Band Feature

Dec 1, 2012

How do I utilize the dual band feature on my belkin N750 DB? Do I have to set up two separate networks? Even then how when my devices PC, iPod, gaming devices are only recognizing the 2.4GHz band network?

View 3 Replies View Related

Cisco AAA/Identity/Nac :: %ASA-3-717009 / Certificate Validation Failed / Certificate Date Is Out-of-range

Jan 30, 2012

There is ASA with remote access VPN and users are authenticated using third party signed certificates (CA is not local in ASA).When user certificate expires i can see it in syslog messages. For example:
 
     %ASA-3-717009: Certificate validation failed. Certificate date is out-of-range, serial number: (...)
 
I would like to know if there is an opportunity to view user's certificate expiry date beforehand, say, 3 days before?

View 3 Replies View Related

Cisco Routers :: RV220W Port VLANS - Missing Feature In Newer Firmware

Nov 11, 2012

From an older manual it describes how to configure this. I installed the oldest firmware available for download and this feature is there. Was this just simply moved somewhere else in the newer firmware?
 
Configuring Port VLANs
You can associate VLANS on the Cisco RV220W to the LAN ports on the device.
By default, all 4 ports belong to VLAN1. You can edit these ports to associate them

[Code].....

View 2 Replies View Related

Cisco Routers :: RV120w Trunk Mode Feature Listed In Manual But Not In Web Console

May 30, 2012

I bought an rv120w. Now i want to trunk 2 lan ports to an smart switch to get 200MB out of that link.
 
The trunk mode in there in the manual that came in the cd with the unit i bought but is not in the web console.
 
I have updated the IOS to 1.0.3.10 to see if th trunk mode was there but is not.
 
My question is,
 
1 is that trunking feature there in the ios?
 
2- If not, why is listed in hte manual that came with the unit?
 
3- if it is in the ios, is there a was to by pass the web console and configure this?
 
4- can i do i maybe backing up the config then, editing the file and restoring it?
 
Screenshot below is from the manual in hte cd that came with the router

View 2 Replies View Related

Cisco Routers :: Install SSL Certificate From CLI On SR520

Sep 13, 2011

How to install an SSL key + certificate on our SR520 from the CLI. I have found the following document.
 
[URL]
 
I basically have the following files that I need to install:
 
Key file:
domainname.key
 Certificates file:
AddTrustExternalCARoot.crt

[Code].....

View 1 Replies View Related

Cisco Routers :: RV120W - SSL Certificate For Client

Oct 30, 2011

When I try to export an SSL Certificate for a Client I get a htps . CSR file instead of the .PEM file. So, I can't update the client computer with the correct certificate.

 Firmware: 1.0.2.6 

View 3 Replies View Related

Cisco Routers :: SA540 And SSL Certificate From DigiCert?

Jan 26, 2012

Installing a SSL certificate from DigiCert on a SA540 router? The SSL certificate is a wildcard variant (*.example.com).

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ISE 1.1.1 Don't Have Certificate Authority Certificate Anymore?

Oct 19, 2012

i am working on ISE 1.1.1, surprisingly i couldn't found certificate authority certifiate at certificate operation anymore.
 
would it be the change on GUI? So now where i can import the CA certificate to ISE?

View 5 Replies View Related

Cisco Routers :: Rv220w Blocking Cameras On Wi-Fi?

Aug 1, 2012

I have 2 ssid signals setup at my workplace.
 
the 2nd one is for all guests and it's isolated from the lan+trusted(1st one) with a vlan feature.
 
the 1st one is for all trusted devices over wifi. the wifi channel is setup to allow mac addresses of the two asante security cameras. the cameras upload videos to an ftp on my server. the two will connect to the router at first, I can ping them or see them in 'my network'. give it a little time and they disappear. then I have to power off/on the router or the cameras to make them work for a few minutes. the process repeats.
 
the cameras make lots of connections to the ftp server. I'm suspecting they're flooding the router and it blocks them. occasionaly they will come back for a minute or two and disappear again as if blocked/unblocked.
 
I added their mac addresses in hopes of making them 'trusted' devices. I've tried them on both ssids. I checked and unchecked firewall/security checks and icsa settings. all other devices I tried, multiple phones and laptops work without problems on both ssids and they don't get blocked.

View 5 Replies View Related

Cisco Routers :: SA520 Optional WAN Blocking ISP

Mar 20, 2012

I have a fibre connection on the dedicated WAN which was working perfect until someone somewhere cut through the line. The SA520 fell over to the Optional WAN port which is basic ADSL line which is connected. Logmein client is online too.
 
But it refuses to browse webpages, appears to be a dns issue or firewall or both.
 
I have added the ISP dns addresses into the forwarders on my server.

View 1 Replies View Related

Cisco Routers :: RV082 - Blocking Of DNS Request

Jun 7, 2010

I have an RV082 (running  2.0.0.19-tm) set up as the gateway to the Internet on my home LAN, and  connect to it through several switches / hubs around my house.   Randomly, and from various connections around the house (which are all  plugged in to different ports of the RV082), a Web request will fail to  load, giving a "Server not found" error in the browser. When I look  at the log in the RV082, it says, "Connection Refused: Policy  Violation".
 
It  seems to be just blocking the DNS requests - everything else appears to  go through normally. For example, I get the message "Looking up  domain name.com" in the  bottom corner of the browser and the request  fails, displaying the Mozilla "Server not found" error page.  When I  click the "Try Again" button the page, it goes through just fine and  everything  works.
 
I don't have any services running behind the firewall, and  do not use the VPN settings. Here are my current firewall settings: 

Firewall : Enable

View 16 Replies View Related

Cisco Routers :: RV042 Giving Out Certificate Instead Of Server?

Jan 28, 2013

RV042 router is giving out the outer certificate  instead of server certificate. Outlook anywhere is failing and we are receiving certificate errors for any secure site behind this firewall.  I'm not talking  about remote  management. I'm talking about people trying to access our  web site,  which is secured, and getting an error because the RV042 is  giving its  own SSL certificate instead of the Server's certificate.  Firmware Version:  1.3.13.02-tm.  I don't see any updates for that  hardware.  I do have it working on an RV042 with the same firmware at a different location.  How do we turn that off or keep it from happening?  Output from a test site Attempting to resolve the host name xxxx in DNS.The host name resolved successfully. Additional DetailsTesting TCP port 443 on host xxxx to ensure it's listening and open. The port was opened successfully. Testing the SSL certificate to make sure it's valid. The SSL certificate failed one or more certificate validation checks. Test Steps ExRCA is attempting to obtain the SSL certificate from remote server xxxx on port 443. ExRCA successfully obtained the remote SSL certificate. Additional Details Remote  Certificate Subject:

SN=California, L=Irvine, C=US, O="Cisco-Linksys,  LLC", OU=RV042, CN=68:ef:bd:b8:0f:78, Issuer: SN=California, L=Irvine,  C=US, O="Cisco-Linksys, LLC", OU=RV042, CN=68:ef:bd:b8:0f:78.Validating the certificate name. Certificate name validation failed. Tell me more about this issue and how to resolve it Additional Details Host  name xxxx doesn't match any name found on the server  certificate SN=California, L=Irvine, C=US, O="Cisco-Linksys, LLC",  OU=RV042, CN=68:ef:bd:b8:0f:78.

View 1 Replies View Related

Cisco Routers :: RV220W Invalid Certificate Error

Oct 15, 2012

When I access setup on an RV220W with Internet Explorer, Mozilla or Safari the following message always displays:
 
"There is a problem with this website's security certificate. The security certificate presented by this website was not issued by a trusted certificate authority. The security certificate presented by this website was issued for a different website's address."
 
I access the router by clicking on "Continue to this website (not recommended)."
 
This also happens anytime a URL filter is triggered by a client. I.e., clients do not see the "Blocked by Cisco Firewall" message unless they also click on the "Continue to this website (not recommended)." option.
 
Even worse, when I attempt to connect as a VPN, the SLLVPN applet gets java connection refused. This is why I bought this thing!
 
What do I need to do to fix all these certificate related errors?

View 3 Replies View Related

Cisco Routers :: Blocking Access To Instagram With ISA550W

Apr 28, 2013

How to successfully block access to Instagram with the ISA550W? Also, have you experienced any significant latency with URL filtering and AV protection enabled?

View 3 Replies View Related

Cisco Routers :: WRVS4400N - VPN Blocking Windows Services

May 15, 2012

I need to access a shared folder over a VPN connection. Very simple host network: no Microsoft server, no AD. Just a WRVS4400N router and a peer-to-peer network.
 
Purchased a second WRVS4400N router to create VPN from SOHO and configured via VPN Setup Wizard.
 
When at the office, I can map a drive letter to a share on the other computer, as follows
 
net use f: \192.168.1.111MyShare /User:MYSELF mypass
 
However, when try same command over VPN, I receive the response:
 
System error 53 has occurred. The network path was not found.
 
I also cannot net view the other computer -- same error. However, I can successfully ping 192.168.1.111.
 
More info:
 
Routers have latest firmware.
 
Over VPN I cannot browse network via Windows Explorer (Win7 Network Neighborhood shows only my own PC. In the office I can see the other computer and the NAS appliance "NAS01").
 
I also cannot connect by entering \192.168.1.111MyShare into Windows Explorer's address bar (although I can do that successfully when at the office), or by choosing Map Network Drive from "Computer".
 
However, over VPN, I can get into NAS administration via https://192.168.1.3 and I can print to the office TCPIP printer (192.168.1.222)

View 4 Replies View Related

Cisco Routers :: RV016 Blocking Wireless Reception?

Feb 25, 2013

We cannot access our wireless modem because the Cisco router is blocking it.  When I try to access the router through a browser I get a message that the router is blocking access.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved