Time Capsule Can Be The Same As Router Settings?
Apr 24, 2012time capsule can be the same as the router settings?
View 1 Replies
ADVERTISEMENT
Using Mac A1355 Time Capsule As A Router
Aug 5, 2011At home I have been trying to set up this Time Capsule as a Router. url...I am trying to set this up for both Macs and PCs. I have set it up as described in the manual and can now find it on all machines in the house and can connect to it wirelessly. I an also plug it into a desktop and get the same issues. So its not a wireless issue.The issue is here. The computers can get email, POP i believe, but no internet.I cannot ping anywhere, and have tried browsing by names, and IPs to no avail. When I ping google.com it says could not find the url.... Ive also tried Telnet. I tried Telnetting the router IP on port 80 however could not figure out what the IP is. I was looking for the 192.168 etc.
View 5 Replies View RelatedSetup A Wired Local Area Network Using Time Capsule 2T As The Router?
Jan 5, 2013is it possible to setup a wired local area network using time capsule 2T as the router?
View 1 Replies View RelatedLinksys Wired Router :: Setup A SG300-10 With An Apple Time Capsule
Dec 2, 2011I've brought a SG300-10 switch and would like to connect it to an Apple Time Capsule (as the base station of my wireless network), Apple Airport Extreme (to extend my wireless network) and 3 x NAS. What is the best way to connect?
Internet > SG300 > Apple TC + NAS x 4 + Apple Airport Extreme (to extended my wireless network) + Mac Pro/iMac'sInternet > Apple TC > SG300 > NAS x 4 (connect to the SG300) + Apple Airport Extreme (to extended my wireless network) + Mac Pro/iMac'sI need the SG300 because the Apple TC doesn't have enough network ports to cennect all my other devices.
Linksys Wireless Router :: EA3500 - Using External Drive As Time Capsule
Aug 15, 2012I'm looking to buy an EA3500. I want to hook an external drive to the USB port and use it as a Time Capsule drive with Mountain Lion. Is this supported?
View 5 Replies View RelatedLinksys Wireless Router :: Wrt320n With Apple Time Capsule In Wifi Sharing
Aug 17, 2012I try to connect my LinkSys wrt320n with Apple Time Capsule with mode "sahring existing wireless network" and so Time capsule doesn't work. It gets IP, but writes "isn't internet connection, WiFi network don't find" and also in the admipage of my wrt320 I can't see Time Capsule as client.
View 4 Replies View RelatedApple Time Capsule Not Assigning IP Addresses?
Jan 6, 2012Briefly here is my setup Internet is supplied to my building by ISP(I have no router) => apple time capsule connected by Ethernet.I have used WIFI to connect all of my devices in the past with no problem until i moved into this place. I have 2 macbooks that can connect without any issues Every single other device in the house cannot connect and does not receive a proper IP Address. The ones being assigned are in the 169.xxxxxx range. Even if i plug my Imac (which cant connect) directly in from the wall via ethernet, it wont connect.The time capsule is setup as a bridge with DCHP set to run automatically. I have reset everything numerous times and restored the router to no avail.I called the ISP and they said it wasnt their problem. I was under the impression they werent assigning the IP Address correctly or something.
View 1 Replies View RelatedConfigure WRT54GL To Extend Time Capsule?
Jan 29, 2011I have set up a home network with Time Capsule as the primary router. I would like to use my WRTG54GL to connect to the network via ethernet and extend it for wireless access at the opposite end of my house. I changed the settings to disable the DHCP server, I named the network the same as the Time Capsule and duplicated security mode and password. I can connect with my laptop, but it initially connects with full internet access, but after about 10 seconds, I can see Airport searching for a network. It reconnects, but for about 45 seconds I have no internet access and then access returns and works fine. On my iPad, however, although it shows I am connected to the network, there is no signal indicator at the top of the screen, and all connectivity seems to be through 3G -- not the network. I assume there is a setting on the Linksys that needs changing, but I can't figure out what it is.
View 10 Replies View RelatedAirport Time Capsule - Only Allowing 20 Wireless Clients?
Feb 11, 2011a colleague at my university is using an Airport Time Capsule 1TB (Model A1355) to share files with his students wirelessly. The machines are running Leopard 10.5.8 and It works well but it will only allow 20 wireless clients at a time. All the client machines log in with a password. When you remove one of the 20, another can log in.
The tech specs on the Apple website just say that it accepts Wireless guest access and there is no mention of a 20 client limit. I looked right through Airport Utility and couldn't find where the number of wireless clients could be configured.Does anybody know if this is the hard limit for the number of wireless clients for an Airport Time Capsule 1TB (Model A1355)? If it is not a hard limit does anybody know how to change it?
Setting Up A Time Capsule / Airport As Primary With E4200 Cascade
Mar 14, 2012I have a Time Capsule current generation, as my primary router connected to my ISP. I'm using a Linksys E4200 as my slave router connected to the Time Capsule via lan to lan. I noticed the TC Internet Connection TCP/IP via DHCP shows a Subnet Mask of 255.255.248.0 and the Surewest IP of 74.222.246.23
Is the 248 setting one I will need on the slave?
The TC IP Address is 10.0.1.1 the DHCP Beginning Address is 10.0.1.3 to allow for the slave to have 10.0.1.2.
The E4200 is set as follows on the routers setup page, Internet Section to Automatic DHCP, Network Section to IP 10.0.1.2 Subnet Mask 255.255.255.0 and DHCP is Disabled.
Both routers have a SSID set to the same name.
Are all these settings correct? I've noticed that a device iPhone or iPad etc has a different IP address assigned by the TC depending on which router it is actually connected. I've also noticed difficulty of a device on one router communicating with one on the other.
Linksys Wireless Router :: E3200 Client Lease Time Settings For Printer?
Jul 7, 2011Can the client lease time be set to never expire to prevent loss of connection for wireless printer with a permanent ip address on E3200? Or is there another way to ensure continuous connection?
View 6 Replies View RelatedLinksys Wireless Router :: E4200 - Block Popup Window That Displays Every Time In Form / Save Settings?
Mar 23, 2012I just installed my new E4200, and am setting the Access Restrictions. Is there anyway to block the popup window that displays every time I enter the form or save the settings?
I'm using IE9 and have tried adjusting the Popup Blocker, but to no avail.
D-Link DCS-930L :: Time And Date Settings?
Aug 26, 2011How to keep the time and date field (in camera settings) to stay? All my other settings seem to be working (and staying) but unless my camera is on all the time, it reverts to 01-01-2011 with a 12:00 am time once I plug it in. I only hook the camera up during the day while I'm at work, so I can keep an eye on my older dogs. I'm not able to view the live video at work (ActiveX issues) so I tried to set up an email schedule so I would be sent pictures.
As a last resort, I went through the wizard set up one more time, thinking I missed something the first time around, but that didn't work either. I am not impressed with D-link support so really don't want to call them unless I absolutely have to.
Cisco Wireless :: RV120W Simple Bug In Time Settings
Jun 12, 2011if you bring your new firmware, please verify the small bug in 'Time Settings': If you choose CET (GMT +1h) AND enable 'daylights saving time' the time goes back 6 hours instead of forward 1 hour.Firmware of RV120W: 1.0.1.3
I'm surprised that CISCO needs such a long time to solve such an issue... I thought I bought the new router from a leading network provider
Cisco Routers :: RVS4000 - Loses Settings After Some Down Time Without Electricity
Aug 26, 2012why my device "cisco RVS4000" loses settings after some down time without electricity?
View 2 Replies View RelatedCisco Firewall :: ASA 5540 / Time Settings To Default After Reboot
Feb 22, 2011When i reboot asa 5540 firewall times settings to default
View 12 Replies View RelatedLinksys Wireless Router :: Wrt54g2 Wifi Stops Working From Time To Time
Oct 26, 2011I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies View RelatedCisco WAN :: 1941 Router Frozen From Time To Time?
Jun 29, 2011Ciso 1941 router frozen once a day, sometimes after 2 to 7 days. When the router frozen, no internet connection and cannot login/ping ethernet ports. I can login to console port and copy the error messages below. Reload the router and it will return back to normal operation. Re-installed IOS but still the same.
IOS Version 15.1(2)T2,
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
[code]...
Linksys Cable / DSL :: X2000 Current Time Will Not Stay Set To Time Zone
May 1, 2012I recently purchased a X2000 ADSL modem/router combination. For some reason the current time will not stay set to the time zone. Rebooting clears the discrepancy for a short time before it drops an hour exactly. I'm in the central time zone and the setting are correct on the basic setup.?
View 1 Replies View RelatedLinksys Cable / DSL :: Retrieving Up-time / DSL Connection Time Information From WAG320N
Jan 17, 2012Is the WAG320N iPv6 compatable ? ,or could it be with a firmware update ?.Is the X2000 in the same boat in iPv6 terms as th WAG320N ?.Is there a way of retrieving "UPTIME" / "DSL connection time" information from the WAG320N and also line attenuation stats etc.Wouldn't need the above but poor isp needs keeping an eye on.
View 3 Replies View RelatedCisco WAN :: 2621 / Time-Based Access Lists Using Time Ranges?
Jan 4, 2011I have one 2621 router i want to creat time base access list so that one of my subnet user(10.128.194.0 255.255.255.128) use only internet between 11am to 2pm.
View 15 Replies View RelatedCisco Wireless :: WAP321 Lost Time - Cannot Sync With Time Server
Jul 8, 2012I just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT". I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.
View 5 Replies View RelatedD-Link DIR-825 :: Wireless Signal Drops From Time To Time?
Jan 10, 2012AI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.
View 3 Replies View RelatedD-Link DIR-655 :: Wireless Network Gets Slow Time To Time
Sep 1, 2011i have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
Best Router For QoS Settings
Feb 26, 2013I'm looking for a good router, home or even Small Business, with good QoS settings. Right now I have the Linksys E3000, but I think I could do better. I want to prioritize VoIP traffic.
View 10 Replies View RelatedLinksys Wireless Router :: E1000 - Can't Access Router Settings After Changing To Static IP
Jun 26, 2012I installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
Linksys Wireless Router :: E3000 - Can't Connect To Router Settings Page
Dec 25, 2012When I try to go to192.168.1.1 it says connection interrupted. If i use the Cisco Connect it tells me i am not connected to the internet. My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly. I can go online, I just cant get to the router.
View 9 Replies View RelatedSonicwall Router Settings For VPN
Oct 5, 2012My internet line is coming directly into HUWAI router and from here its supplying to sonicwall TZ210 WAN port.I have a domain from dyndns.org that is set right now in sonicwall. But when I browse this domain from outsde it opens my HUWAI router login page and I want it to open my SONICWALL login PAGE.
View 2 Replies View RelatedHow To Get Settings Page Of Router
Apr 30, 2011I have a dlink dap-1360 which my computer technician installed for me earlier this year. i would now like to edit the details such as network name etc.how do i get to the settings page of my router.
View 1 Replies View RelatedCan't Access Router Settings
May 28, 2012So I used an Url to acess my router but then, it asked for a username and password. I know I havent messed with it because this is the first time I seen this. I tried leaving the username blank and typing in "admin" for password but nothing worked
View 5 Replies View RelatedRouter Settings Keep Changing?
Jun 15, 2011Every so often (random amounts of time) my internet setting either on the router or pc change and then I it comes up with an error that my settings aren't the same as my router... I use a Orange Live box and windows 7. also when I want to sign into games for windows that sometime crashes the internet and on DOW2 and minecraft.
View 10 Replies View RelatedBT Hub - Can't Access Router Settings?
Jan 14, 2012I used to have Avanti Satellite broadband but then upgraded to new BET technology with BT which allowed people living very far from their exchange to get up to 2mb phone line broadband. With Avanti, I could access my Buffalo routers settings by just typing in the routers ip.But, now with the new BT Hub we got, whenever I type in ipconfig to cmd, the gateway address is the address to access the settings of the hub. I tried the old bufallo ip but it is not working. I think this is because the hub is a router aswell. Is there anyway I can access the routers settings?
View 13 Replies View RelatedCan't Connect To Router Settings?
Jan 5, 2012Im using my cousins internet because Im staying at her house for the hollidays and when I try to connect to her internet I get the message - Limited connectivity or no internet connection. I've tried to access the router settings but nothing will work, I've then tried to put the cable directly into my laptop and type the default ip adress into the address bar but still nothing
View 2 Replies View Related