Using Mac A1355 Time Capsule As A Router
Aug 5, 2011
At home I have been trying to set up this Time Capsule as a Router. url...I am trying to set this up for both Macs and PCs. I have set it up as described in the manual and can now find it on all machines in the house and can connect to it wirelessly. I an also plug it into a desktop and get the same issues. So its not a wireless issue.The issue is here. The computers can get email, POP i believe, but no internet.I cannot ping anywhere, and have tried browsing by names, and IPs to no avail. When I ping google.com it says could not find the url.... Ive also tried Telnet. I tried Telnetting the router IP on port 80 however could not figure out what the IP is. I was looking for the 192.168 etc.
View 5 Replies
ADVERTISEMENT
Apr 24, 2012
time capsule can be the same as the router settings?
View 1 Replies
View Related
Jan 5, 2013
is it possible to setup a wired local area network using time capsule 2T as the router?
View 1 Replies
View Related
Dec 2, 2011
I've brought a SG300-10 switch and would like to connect it to an Apple Time Capsule (as the base station of my wireless network), Apple Airport Extreme (to extend my wireless network) and 3 x NAS. What is the best way to connect?
Internet > SG300 > Apple TC + NAS x 4 + Apple Airport Extreme (to extended my wireless network) + Mac Pro/iMac'sInternet > Apple TC > SG300 > NAS x 4 (connect to the SG300) + Apple Airport Extreme (to extended my wireless network) + Mac Pro/iMac'sI need the SG300 because the Apple TC doesn't have enough network ports to cennect all my other devices.
View 1 Replies
View Related
Aug 15, 2012
I'm looking to buy an EA3500. I want to hook an external drive to the USB port and use it as a Time Capsule drive with Mountain Lion. Is this supported?
View 5 Replies
View Related
Aug 17, 2012
I try to connect my LinkSys wrt320n with Apple Time Capsule with mode "sahring existing wireless network" and so Time capsule doesn't work. It gets IP, but writes "isn't internet connection, WiFi network don't find" and also in the admipage of my wrt320 I can't see Time Capsule as client.
View 4 Replies
View Related
Jan 6, 2012
Briefly here is my setup Internet is supplied to my building by ISP(I have no router) => apple time capsule connected by Ethernet.I have used WIFI to connect all of my devices in the past with no problem until i moved into this place. I have 2 macbooks that can connect without any issues Every single other device in the house cannot connect and does not receive a proper IP Address. The ones being assigned are in the 169.xxxxxx range. Even if i plug my Imac (which cant connect) directly in from the wall via ethernet, it wont connect.The time capsule is setup as a bridge with DCHP set to run automatically. I have reset everything numerous times and restored the router to no avail.I called the ISP and they said it wasnt their problem. I was under the impression they werent assigning the IP Address correctly or something.
View 1 Replies
View Related
Jan 29, 2011
I have set up a home network with Time Capsule as the primary router. I would like to use my WRTG54GL to connect to the network via ethernet and extend it for wireless access at the opposite end of my house. I changed the settings to disable the DHCP server, I named the network the same as the Time Capsule and duplicated security mode and password. I can connect with my laptop, but it initially connects with full internet access, but after about 10 seconds, I can see Airport searching for a network. It reconnects, but for about 45 seconds I have no internet access and then access returns and works fine. On my iPad, however, although it shows I am connected to the network, there is no signal indicator at the top of the screen, and all connectivity seems to be through 3G -- not the network. I assume there is a setting on the Linksys that needs changing, but I can't figure out what it is.
View 10 Replies
View Related
Feb 11, 2011
a colleague at my university is using an Airport Time Capsule 1TB (Model A1355) to share files with his students wirelessly. The machines are running Leopard 10.5.8 and It works well but it will only allow 20 wireless clients at a time. All the client machines log in with a password. When you remove one of the 20, another can log in.
The tech specs on the Apple website just say that it accepts Wireless guest access and there is no mention of a 20 client limit. I looked right through Airport Utility and couldn't find where the number of wireless clients could be configured.Does anybody know if this is the hard limit for the number of wireless clients for an Airport Time Capsule 1TB (Model A1355)? If it is not a hard limit does anybody know how to change it?
View 3 Replies
View Related
Mar 14, 2012
I have a Time Capsule current generation, as my primary router connected to my ISP. I'm using a Linksys E4200 as my slave router connected to the Time Capsule via lan to lan. I noticed the TC Internet Connection TCP/IP via DHCP shows a Subnet Mask of 255.255.248.0 and the Surewest IP of 74.222.246.23
Is the 248 setting one I will need on the slave?
The TC IP Address is 10.0.1.1 the DHCP Beginning Address is 10.0.1.3 to allow for the slave to have 10.0.1.2.
The E4200 is set as follows on the routers setup page, Internet Section to Automatic DHCP, Network Section to IP 10.0.1.2 Subnet Mask 255.255.255.0 and DHCP is Disabled.
Both routers have a SSID set to the same name.
Are all these settings correct? I've noticed that a device iPhone or iPad etc has a different IP address assigned by the TC depending on which router it is actually connected. I've also noticed difficulty of a device on one router communicating with one on the other.
View 1 Replies
View Related
Oct 26, 2011
I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies
View Related
Jun 29, 2011
Ciso 1941 router frozen once a day, sometimes after 2 to 7 days. When the router frozen, no internet connection and cannot login/ping ethernet ports. I can login to console port and copy the error messages below. Reload the router and it will return back to normal operation. Re-installed IOS but still the same.
IOS Version 15.1(2)T2,
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
[code]...
View 5 Replies
View Related
May 1, 2012
I recently purchased a X2000 ADSL modem/router combination. For some reason the current time will not stay set to the time zone. Rebooting clears the discrepancy for a short time before it drops an hour exactly. I'm in the central time zone and the setting are correct on the basic setup.?
View 1 Replies
View Related
Jan 17, 2012
Is the WAG320N iPv6 compatable ? ,or could it be with a firmware update ?.Is the X2000 in the same boat in iPv6 terms as th WAG320N ?.Is there a way of retrieving "UPTIME" / "DSL connection time" information from the WAG320N and also line attenuation stats etc.Wouldn't need the above but poor isp needs keeping an eye on.
View 3 Replies
View Related
Jan 4, 2011
I have one 2621 router i want to creat time base access list so that one of my subnet user(10.128.194.0 255.255.255.128) use only internet between 11am to 2pm.
View 15 Replies
View Related
Jul 8, 2012
I just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT". I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.
View 5 Replies
View Related
Jan 10, 2012
AI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.
View 3 Replies
View Related
Sep 1, 2011
i have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
View 5 Replies
View Related
Jul 5, 2011
I'm trying to get a wireless N-router and a N-adapter for a room outside the range of a G router. But their are two laptops at the house. They both use g adapters. Can the N router broadcast both N and G signal at the same time? So all adapters in the house can connect to the router. Does broadcasting both signals degree the range of the N broadcast making the an additional N adapter useless?
View 4 Replies
View Related
Jun 13, 2011
How can I set my DIR-655 Router to limit my son's time on the Internet? I have all computers set up with MAC addresses for a more secure connection.
View 1 Replies
View Related
Aug 17, 2011
I'm just wondering here, is it by any chance possible to power off a home network router on a given time? You know, perhaps schedule the up- and down times, when it's on and when it's supposed to be off.
View 13 Replies
View Related
Oct 4, 2012
I have 6 computers on a home network. 5 of them are running Windows 7 Home Premium and 1 is running Windows 7 Ultimate. My ISP is CBeyond, a T1 signal. I consistently get the "Windows has detected an IP address conflict" error on my screens and I have to reboot my router at least 5 times a day to get the wireless signal to connect. My laptop states that it is connected but I get the yellow triangle telling me that it has no internet connection. The firmware on the router is the latest version. DHCP is enabled on the router and set to Obtain Address Automatically and Obtain DNS automatically.
I can't figure out what's wrong. The 6 computers are wired through a switch connected to another switch connected to the router. This is also how the computers are connected on the network. I have several switches connected to the router. How do I configure the router so it doesn't have to be rebooted all the time to access the internet wirelessly?
View 14 Replies
View Related
Sep 20, 2011
Lately I've noticed that my internet connection has been less than stellar. I will be playing an online game or surfing the web, and every so often I'll freeze up or things just won't run smoothly. My network consists of the following...All of my computers and devices connect to a Cisco 16 port gigabit switchThe switch then connects to a Peplink 20 Dual WAN routerThe router connects to a cable modem as well as a DSL modemThe other day I was trying to diagnose the problem, as well as update the firmware of the router. While I was on the main "status" page, I noticed an error saying that I couldn't connect to the router. It quickly cleared and everything was working fine. This of course made me think that my issues have to do with my connection to the router, and not with the internet service itself. I then tried ping -t to two other computers on the network, as well as the router. After 5 minutes of pinging, the connections to the two computers had zero fails, while the router connection failed about 5% of the time. I ran the same check from the other computers on the network, with similar results.So, I know that the issue lies with the router (I think), but that's where my brainstorm ends.
View 4 Replies
View Related
Mar 24, 2011
I'll access a site like [URL] normally the first 2 or three links will work that I click on and then maybe the third link will cause a timeout. I'll refresh the page after receiving the timeout notice and it'll appear fine. This is happening to other sites aswell. The reason I know it's the router is when I plug my PC directly into the modem, I don't receive this problem. The problem is happening with my laptop, PC and iphone. I've asked the ISP to go over the settings in my router to make sure they're all configured correctly and they say they're not trained on troubleshooting routers so they direct me to Netgear again. I don't really know what I should be looking at in the router page (I don't know much about routers/networking),
View 10 Replies
View Related
Jul 23, 2011
I have a smc wireless cable modem gateway router lease is set to expire every 7 days does it matter if its like more often, is this good enough, i was told every day might be better as i get better connection.
View 2 Replies
View Related
Nov 29, 2011
At times when my laptop is running a dianostic it says maybe your DNS is haveing a problem. I don't know what a is DNS
View 2 Replies
View Related
Aug 21, 2011
I have recently moved home and my laptop loses connection to my router all the time! This usually happens, roughly every 10-15 minutes. I have contacted my ISP and they have told me there is nothing wrong, but I beg to differ. My xbox 360 is further away from my router and it doesnt lose connection as much
View 1 Replies
View Related
Sep 7, 2012
I use an adsl router to make a wireless network in my room.I keep the network hidden and also keep a password. The problem is, the power goes out twice a day for a minuite, and my router automatically resets itself when the power comes back on. Because of this I have to keep going to the router settings, set up a password and hide the network twice a day.
View 1 Replies
View Related
Apr 29, 2011
I have a D-link with both wired and wireless communication. Everything functions well except that Win-XP keeps telling me all the time that the LAN is disconnected.
View 1 Replies
View Related
Jun 12, 2011
Set my DIR-655 to limit my son's time on the Internet. I have all the connections set to the MAC Addresses
View 4 Replies
View Related
Nov 24, 2012
I starting having really bad lag when playing games or just surfing. I put on wireshark and can see my router is broadcasting all the time. here is part of the wireshark log
"1","0.000000000","D-Link_**:**:**","Broadcast","ARP","60","Who has 192.168.0.172? Tell 192.168.0.1"
"2","0.000737000","D-Link_**:**:**","Broadcast","ARP","60","Who has 192.168.0.171? Tell 192.168.0.1"
"3","0.001469000","D-Link_**:**:**","Broadcast","ARP","60","Who has 192.168.0.170? Tell 192.168.0.1"
"4","1.002284000","D-Link_**:**:**","Broadcast","ARP","60","Who has 192.168.0.169? Tell 192.168.0.1"
it does this for the whole subnet then starts over. i turned off all the broadcasting in all the menu and it still doing it. i upgraded to 2.10NA, but it did not seem to do anything to it. I bought this router on 3-5-11. I have not tried resetting it to factory settings. I wanted to see if i missed something first. Router is on a APC UPS with the modem and the switch.
Hardware version is dir-655 B1
firmware is 2.10NA
cox cable is my ISP
View 14 Replies
View Related
Aug 13, 2011
I'm using Comcast cable. I have a motorola cable modem. I run that into a Netgear 8-channel router with wireless (that's 8 physical network sockets).I have had these devices hard-connected to the router up until today and everything has been running fine:
* My Desktop (desktop running Windows 7 with Gigabyte motherboard and built-in Realtek NIC)
* T-Mobile VoIP device
* My Laptop (old Alienware running XP with generic NIC)
Today I took my old desktop motherboard from a year ago (Gigabyte motherboard, but not the same as My Desktop, built-in Realtek NIC), gutted it out, replaced the hard drive, got it running Windows 7 and set it up for my kids. Got it connected to the Internet early this morning when my machine was off and it ran fine.While it was updating, I fired up My Desktop and the router stopped working, all machines lost Internet, and I was at a loss.After some troubleshooting, it turns out that if I have My Desktop and the Kids Machine connected to the router and running at the same time, all devices on the router lose connection. I can have the Kids Machine on with the T-Mobile device and My Laptop and they all work. I can have My Desktop on with the T-Mobile device and My Laptop and they all work. But as soon as My Desktop and the Kids Machine come on together, everything gets hosed.The router is set to reserve different IP addresses by Mac Address for every machine. And I've verified that My Desktop gets its IP address correctly, and so does the Kids Machine. They are different IPs.I (usually) know just enough about networking to get a home network set up.
View 2 Replies
View Related
Jun 16, 2011
I use a tethered iPhone to access the Internet. We live outside of the DSL service area so this is really the only high speed internet connection I have available.Unfortunately the "wireless hotspot" feature of the phone isn't very consistent. I can get all of my computers to connect to my phone this way, but the connection is constantly dropping, and I'm always having to reboot the phone to get the computers to pick it up again. The most reliable way to use the tethering is to just plug the phone in to whichever computer I happen to be using. This does create a problem, though. If I want to print to the network computer or access a file off of one of the other computers I have to manually connect to the wireless router, because that's the only way the computers can talk to each other. In the meantime, though, I can't use the internet because my computer thinks it needs to try to connect to the internet through the wireless router, and when it can't find the internet that way it just tells me there's no connection. Nevermind that my phone is still plugged in, for some reason it doesn't want to use that connection if it can see the router.
View 7 Replies
View Related
