Can N And G Be Broadcast At Same Time From A N Router

Jul 5, 2011

I'm trying to get a wireless N-router and a N-adapter for a room outside the range of a G router. But their are two laptops at the house. They both use g adapters. Can the N router broadcast both N and G signal at the same time? So all adapters in the house can connect to the router. Does broadcasting both signals degree the range of the N broadcast making the an additional N adapter useless?

View 4 Replies


ADVERTISEMENT

Linksys Wireless Router :: Wrt54g2 Wifi Stops Working From Time To Time

Oct 26, 2011

I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.

View 3 Replies View Related

Cisco WAN :: 1941 Router Frozen From Time To Time?

Jun 29, 2011

Ciso 1941 router frozen once a day, sometimes after 2 to 7 days. When the router frozen, no internet connection and cannot login/ping ethernet ports. I can login to console port and copy the error messages below. Reload the router and it will return back to normal operation. Re-installed IOS but still the same.
 
IOS Version 15.1(2)T2,
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)

[code]...

View 5 Replies View Related

Router Won't Broadcast Unless Reset

May 16, 2011

My router has been having major problems lately [Well, for a while now]. Before, it would make all my machines [1 PC, 2 Laptops] disconnect from the internet briefly and reconnect. This doesn't impact browsing, video watching, etc. It wouldn't even say I was disconnected. However, I know it was disconnecting because programs like AIM, MSN, and multiple video games would say I lost connection. For example, MSN would disconnect and take me out of any conversations and reconnect a second later. Friends tell me that I keep going offline and then online.

I read somewhere I should change my channel, so I did and still got the same problem. Furthermore, my router/pc are literally right next to each other. Then I read elsewhere I should do a factory reset on my router by holding the reset button for a while. So I did and it reset. It started broadcasting as an unsecured network, so I was going to secure it.

1. Log in via http://192.168.0.1 (default "username: Admin and no pass")

2. Go to setup tab ----> internet ----> internet connection wizard2.1 CHANGE PASSWORD ! click next 2.2 chose time zone (you know where you are) 2.3 Configure your Internet Connection DHCP Connection (Dynamic IP Address)Choose this if your Internet connection automatically provides you with an IP Address. Most Cable Modems use this type of connection. 2.4. press "clone your computer's MAC address" ; hostname: 'your computer name in ubuntu' ( mine is "grobar" yours is ..... )

3. Go to setup tab ----> wireless settings ----> Wireless Network Setup Wizard (after this we're gonna do manual settings)

3.1 give your network a name= SSID (e.g. 'grobar')
3.2.Automatically assign a network key (Recommended) and chose WAP or WAP2
3.3 Write down the network key!!! Or do printscr and save this page.

4. Go to setup tab ----> wireless settings ---->Manual Wireless Network Setup 4.1 Wireless Network SettingsEnable Wireless : ALWAYS Wireless Network Name : (Also called the SSID) the name you gave in 3.1 802.11 Mode : chose "mixed 802.11n,g and b" Enable Auto Channel Scan : YES Wireless Channel : AUTO Transmission Rate : BEST (Mbit/s) Channel Width : AUTO 20/40 MHz Visibility Status : !!!Invisible!!! (so that no outsiders know your SSID except you) So after I finish the Internet Connection Wizard [Setting up Password etc], the http://192.168.0.1/ page asks me to click "Connect" so it can reboot the router with the settings. When I do so, the router turns off with the power icon being orange. After about 15 seconds or so, the broadcasting icon, power icon, and PC1 icon all turn green. However, there is a globe icon on it as well and that is ORANGE.

Regardless of power cycling, redoing the process, etc. it stays orange. None of my machines can connect to it. The only way I can connect again to the router is if I do a reset again (By holding the reset button). But then, I am unsecured and live in an apartment. I would like to add that the above process is the one I did previously and it worked fine. But then I had to reset the router and a similar problem occurred but I managed to fix it somehow and the first problem I talked about started happening (Reconnecting and disconnecting). Furthermore, when I go to "Connect to a Network" one of the old SSIDs I created for the router is still there regardless of the router status (Offline, Not connected, etc). I am typing this by connecting my PC directly to my modem. Router Information: D-Link DIR-615 300N

View 4 Replies View Related

Wireless Router Won't Broadcast?

Aug 12, 2011

my wireless router isn't broadcasting. It has the normal internet up but the wireless isn't allowing us to connect at all.

View 1 Replies View Related

Ambicon WL300N-AR Router AP And Broadcast

Feb 26, 2012

They currently have three Ambicon WL300N-ARs in their network. They are set up as AP and everything has been running fine till we tried to put a security DVR/camera behind each router. The first one worked without any issues but once we connected the second DVR to the network became unusable, very slow. Someone told the IT guy that it was probably a broadcast storm. I don't know anything about the ambicon routers, but if the wireless is setup as a AP would it forward broadcast? I was under the impression that routers did not forward broadcast. or by setting it up as a AP it no longer performs as a router? The three Ambicons are connected to a unmanaged fiber switch, I asked for a make and model but he didn't know. Also connected to the fiber switch is another unmanaged netgear switch.

View 1 Replies View Related

Windstream Dsl Modem / Router Won't Broadcast Wifi?

Apr 1, 2012

My DSL modem/wireless router wont broadcast the wifi signal i need to know if it is just defective or a setting that can be turned off, It was working just fine and just recently stopped broadcasting, it works just fine for a direct connection. (It is a regular windstream wireless modem/router.

View 2 Replies View Related

D-Link DIR-601 :: Wireless Router Won't Broadcast After Updating Firmware

Nov 29, 2011

I recently updated my firmware for a DIR-601 router and have internet while hardwired, but no wireless. I saved the configuration settings before updating, but this doesn't even matter because my wireless router doesn't even show up in the list of available wireless network connections. Why isn't my router showing up? I tried a few things like unplugging it and resetting it, but nothing seems to work.

View 3 Replies View Related

Linksys Wireless Router :: WRT54GL Broadcast Keeps Cycling On And Off

Sep 22, 2011

I've had a WRT54GL ( for about a week now ) with no real issues.  Today my wife mentioned that the net's been flaky  ( wireless nto hard wired ).  I originally noticed what seemed like minutes for my desktop of laptop to connect to any web pages.  Loads were extremely slow.  According to the computer I had a 1 mbps connection.  I did the standard resetting of the modem and router.babble babble babble. Eventually, I ran a wifi analyzer from my phone to determine an ideal channel.  However, while running the frequency scanner I also noticed that my broadcasting would continue to drop off the radar for a quick moment then return.  This seemed to be true no matter what channel I set.  What's interesting is that the signal would read as extremely strong for 45 sec - 1 minute, then completely drop the signal, then another strong broadcast. Other neighboring signals don't exhibit this behavior....well I would see the weaker signals coming in and off the radar from time to time. I'm guessing it's some type of interference?  However if that's the case I can't explain why my signal seems so strong.  I'm assuming I'd see a lot of fluctuation in my signal before dropping off ( instead of going from 100 to 0 in the blink of an eye ).

View 1 Replies View Related

Linksys Wireless Router :: How To Disable Broadcast On New EA6500

Oct 10, 2012

I think I've been carefully through every single screen and can't figure out how to disable the wireless broadcast on my new EA6500. I typically see this in the "wireless" settings but must be missing something.

View 4 Replies View Related

Linksys Wireless Router :: WRT54G - How To Broadcast Only One Network

Mar 3, 2010

I recently had trouble connection to my Linksys WRT54G router. However, in this process I had to create a couple of new profiles/networks/SSID or whatever they are called. I now have one functioning network, but my router is still broadcasting the other two networks. How can I get my router to only broadcast the one network, I am currently using? I erased them from Vista, so that my own computer does not automatically log on to the, but that is clearly not enough. Since one of the networks is not secured with a password (dont ask why), my concern is that my neighbours can access it. BTW, I am using Windows Vista on a Toshiba Satelite A200. 

View 5 Replies View Related

Creating Broadcast Network (Ethernet) / Connect Router To Another Via A PPP Connection?

Mar 12, 2012

So you've got broadcast networks - Ethernet, PPP networks such as serial & T1/E1 and then youve got Non-broadcast multi-access links such as Frame relay and ATM. I understand the concepts of each. That's not the problem.My question is, is it possible create a broadcast network (Ethernet) but also connect a router to another router via a PPP connection? Say to a specific branch for example. Just curious if you can use multipule link types.

View 4 Replies View Related

Broadband :: Can't Connect To WRT54GS Router After Disable SSID Broadcast

Mar 13, 2012

I checked the, do not broadcast SSID in my linksys, now i cant log into the router it is a linksys WRT54GS

View 3 Replies View Related

Linksys Wireless Router :: Disabling SSID Broadcast On RE1000?

Oct 25, 2011

I just set up a brand new LinksysE4200 router at one end of my home, and a Linksys RE1000 range expander at the other end in order to provide full WiFi coverage to my entire house.  Everything is working great except for one important detail.. There is currently no way to disable SSID broadcast on the RE1000 range expander! I just flashed it with the latest firmware (v1.0.01 build 2, Jul 22, 2011) , but I'm still unable to disable it, even though it is disabled on the E4200 from which it's receiving the signal it's rebroadcasting.  I am seriously considering returning the RE1000. Linksys. add the ability to disable SSID broadcast on the RE1000 in a (not too distant) future firmware upgrade! As far as I'm concerend, this is a MUST HAVE feature in order for this product to even be considered for use in any sensitive network environment.

View 2 Replies View Related

Linksys Wireless Router :: Disable SSID Broadcast On EA6500?

Nov 21, 2012

How can you disable SSID broadcast on EA6500 wireless network.

View 4 Replies View Related

Linksys Wireless Router :: E1200 How To Disable Broadcast Of SSID

Jul 28, 2011

How do I disable the broadcast of my SSID? I do not want wireless. I only bought this router to hook up two computers to the internet via Ethernet cable.

View 9 Replies View Related

Linksys Wireless Router ::E4200 - Why Firmware Can Only Set 5Ghz Broadcast

Dec 30, 2011

I had a e4200,and i used 5ghz wireless.i can't set it to channel 149 or other high channel,my old wireless ethernet card can only support that.make the next version of the firmware can setting 5ghz channel to channel 149、153、157、161.

View 2 Replies View Related

Linksys Wireless Router :: EA3500 - How To Turn Broadcast SSID On / Off

Mar 21, 2013

EA3500, I'm using the Smart Wi-Fi interface through a browser. How do I make my router broadcast the SSID? I think it was when I was setting up using the old interface, before updating the firmware, that I set it to *not* broadcast the network name. Now I feel like I've been all through the menus twice on the Smart Wi-Fi interface, and can't find the on/off toggle.

View 9 Replies View Related

Linksys Wireless Router :: Disable Broadcast SSID EA6500?

Nov 8, 2012

Can the broadcast be disabled on EA6500?

View 1 Replies View Related

Linksys Wireless Router :: E4200 - How To Enable SSID Broadcast

Nov 20, 2012

I got E4200 v.2 with the latest cloud firmware. On the previous (non-cloud) firmware there was an option to enable or disable SSID broadcast, and I disable it. Now I want to enable it back, but can not find this option in Cisco Connect Cloud. how to enable SSID broadcast on the E4200 v.2 with Cisco Connect Cloud firmware?

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Port Forward To Broadcast For WOL?

Jan 25, 2011

Some routers are able to forward to broadcast directly by sending a port to 192.168.1.255, other's I've been able to trick by forwarding to 192.168.1.254 and then editing the arp table with 192.168.1.254 <-> ff:ff:ff:ff:ff:ff. Is there any way I can edit the arp table of the E4200? Is there a way to telnet in or get a console connection?

View 9 Replies View Related

Linksys Wireless Router :: EA2700 - Disable Broadcast SSID Function?

Feb 22, 2013

I am the latest firmware of EA2700 but why I can't find there is disable broadcast SSID function?

View 1 Replies View Related

Linksys Wireless Router :: E2500 SSID Broadcast Disabled But Still Shows Up

Dec 1, 2011

why my SSID still displays even though I have the SSID Broadcast "Disabled" for 5 GHz and 2.4Ghz configurations.  The name of my network shows full signal strength and a lock next to the name but I was under the impression if I have disabled the SSID broadcast it shouldn't show up at all and would force a user to manually input the network name when trying to connect to it.  I have the router configured to only allow certain MAC addresses wireless access as well.  Router is running Firmware Version: 1.0.03.Also, my primary computer my iMac running 10.7.2 boots up or is brought out of sleep mode I constantly need to go up to the top of my screen and re-select my network. 

View 4 Replies View Related

Linksys Wireless Router :: E4200 - Not Allow Connection To Devices When SSID Broadcast Is Turned Off

Jan 26, 2012

E4200 not letting my known wireless devices connect when SSID Broadcast is turned off.

View 1 Replies View Related

Linksys Wireless Router :: Cisco E3000 / Change Guest Network Broadcast Ssid

Sep 7, 2011

i have a e3000 set up with my network i have guest network set up through the cisco connect but dont see a field to change the guest network broadcast ssid so an ideas?

View 1 Replies View Related

Linksys Wireless Router :: E4200 Disabling SSID Broadcast For Both 2.4 And 5GHz Stops Blinking

Jul 1, 2011

I was quite excited about E4200 I got yesterday. Everything works perfect except front LED light start blinking a few hours later. Don't know why it happens in a sudden and non-stop. After several tries, I found that disabling SSID broadcast for both 2.4 and 5GHz stops the blinking.Of course, before doing that, I upgraded firmware to 1.0.02, reset to factory defaults and finally set up E4200 manually rather than using Cisco Connect. Now the LED light is continuously lit.

View 4 Replies View Related

Linksys Cable / DSL :: X2000 Current Time Will Not Stay Set To Time Zone

May 1, 2012

I recently purchased a X2000 ADSL modem/router combination.  For some reason the current time will not stay set to the time zone.  Rebooting clears the discrepancy for a short time before it drops an hour exactly.  I'm in the central time zone and the setting are correct on the basic setup.?

View 1 Replies View Related

Linksys Cable / DSL :: Retrieving Up-time / DSL Connection Time Information From WAG320N

Jan 17, 2012

Is the WAG320N iPv6 compatable ? ,or could it be with a firmware update ?.Is the X2000 in the same boat in iPv6 terms as th WAG320N ?.Is there a way of retrieving "UPTIME" / "DSL connection time"  information from the WAG320N and also line attenuation stats etc.Wouldn't need the above but poor isp needs keeping an eye on.

View 3 Replies View Related

Cisco WAN :: 2621 / Time-Based Access Lists Using Time Ranges?

Jan 4, 2011

I have one 2621 router i want to creat time base access list so that one of my subnet user(10.128.194.0 255.255.255.128) use only internet between 11am to 2pm.

View 15 Replies View Related

Cisco Wireless :: WAP321 Lost Time - Cannot Sync With Time Server

Jul 8, 2012

I just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT".  I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.

View 5 Replies View Related

D-Link DIR-825 :: Wireless Signal Drops From Time To Time?

Jan 10, 2012

AI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.

View 3 Replies View Related

D-Link DIR-655 :: Wireless Network Gets Slow Time To Time

Sep 1, 2011

i have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:

Hardware Version: A4 - Firmware Version: 1.32EU

View 5 Replies View Related

Broadcast A Mail To Hosts In LAN?

Apr 14, 2013

I know that 255.255.255.255 is the broadcast address to send message to all hosts that are in LAN. what i want here is, i want to send a mail to all hosts using this address.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved