Linksys Wireless Router :: WRT54GL Broadcast Keeps Cycling On And Off

Sep 22, 2011

I've had a WRT54GL ( for about a week now ) with no real issues.  Today my wife mentioned that the net's been flaky  ( wireless nto hard wired ).  I originally noticed what seemed like minutes for my desktop of laptop to connect to any web pages.  Loads were extremely slow.  According to the computer I had a 1 mbps connection.  I did the standard resetting of the modem and router.babble babble babble. Eventually, I ran a wifi analyzer from my phone to determine an ideal channel.  However, while running the frequency scanner I also noticed that my broadcasting would continue to drop off the radar for a quick moment then return.  This seemed to be true no matter what channel I set.  What's interesting is that the signal would read as extremely strong for 45 sec - 1 minute, then completely drop the signal, then another strong broadcast. Other neighboring signals don't exhibit this behavior....well I would see the weaker signals coming in and off the radar from time to time. I'm guessing it's some type of interference?  However if that's the case I can't explain why my signal seems so strong.  I'm assuming I'd see a lot of fluctuation in my signal before dropping off ( instead of going from 100 to 0 in the blink of an eye ).

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: How To Disable Broadcast On New EA6500

Oct 10, 2012

I think I've been carefully through every single screen and can't figure out how to disable the wireless broadcast on my new EA6500. I typically see this in the "wireless" settings but must be missing something.

View 4 Replies View Related

Linksys Wireless Router :: WRT54G - How To Broadcast Only One Network

Mar 3, 2010

I recently had trouble connection to my Linksys WRT54G router. However, in this process I had to create a couple of new profiles/networks/SSID or whatever they are called. I now have one functioning network, but my router is still broadcasting the other two networks. How can I get my router to only broadcast the one network, I am currently using? I erased them from Vista, so that my own computer does not automatically log on to the, but that is clearly not enough. Since one of the networks is not secured with a password (dont ask why), my concern is that my neighbours can access it. BTW, I am using Windows Vista on a Toshiba Satelite A200. 

View 5 Replies View Related

Linksys Wireless Router :: Disabling SSID Broadcast On RE1000?

Oct 25, 2011

I just set up a brand new LinksysE4200 router at one end of my home, and a Linksys RE1000 range expander at the other end in order to provide full WiFi coverage to my entire house.  Everything is working great except for one important detail.. There is currently no way to disable SSID broadcast on the RE1000 range expander! I just flashed it with the latest firmware (v1.0.01 build 2, Jul 22, 2011) , but I'm still unable to disable it, even though it is disabled on the E4200 from which it's receiving the signal it's rebroadcasting.  I am seriously considering returning the RE1000. Linksys. add the ability to disable SSID broadcast on the RE1000 in a (not too distant) future firmware upgrade! As far as I'm concerend, this is a MUST HAVE feature in order for this product to even be considered for use in any sensitive network environment.

View 2 Replies View Related

Linksys Wireless Router :: Disable SSID Broadcast On EA6500?

Nov 21, 2012

How can you disable SSID broadcast on EA6500 wireless network.

View 4 Replies View Related

Linksys Wireless Router :: E1200 How To Disable Broadcast Of SSID

Jul 28, 2011

How do I disable the broadcast of my SSID? I do not want wireless. I only bought this router to hook up two computers to the internet via Ethernet cable.

View 9 Replies View Related

Linksys Wireless Router ::E4200 - Why Firmware Can Only Set 5Ghz Broadcast

Dec 30, 2011

I had a e4200,and i used 5ghz wireless.i can't set it to channel 149 or other high channel,my old wireless ethernet card can only support that.make the next version of the firmware can setting 5ghz channel to channel 149、153、157、161.

View 2 Replies View Related

Linksys Wireless Router :: EA3500 - How To Turn Broadcast SSID On / Off

Mar 21, 2013

EA3500, I'm using the Smart Wi-Fi interface through a browser. How do I make my router broadcast the SSID? I think it was when I was setting up using the old interface, before updating the firmware, that I set it to *not* broadcast the network name. Now I feel like I've been all through the menus twice on the Smart Wi-Fi interface, and can't find the on/off toggle.

View 9 Replies View Related

Linksys Wireless Router :: Disable Broadcast SSID EA6500?

Nov 8, 2012

Can the broadcast be disabled on EA6500?

View 1 Replies View Related

Linksys Wireless Router :: E4200 - How To Enable SSID Broadcast

Nov 20, 2012

I got E4200 v.2 with the latest cloud firmware. On the previous (non-cloud) firmware there was an option to enable or disable SSID broadcast, and I disable it. Now I want to enable it back, but can not find this option in Cisco Connect Cloud. how to enable SSID broadcast on the E4200 v.2 with Cisco Connect Cloud firmware?

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Port Forward To Broadcast For WOL?

Jan 25, 2011

Some routers are able to forward to broadcast directly by sending a port to 192.168.1.255, other's I've been able to trick by forwarding to 192.168.1.254 and then editing the arp table with 192.168.1.254 <-> ff:ff:ff:ff:ff:ff. Is there any way I can edit the arp table of the E4200? Is there a way to telnet in or get a console connection?

View 9 Replies View Related

Linksys Wireless Router :: EA2700 - Disable Broadcast SSID Function?

Feb 22, 2013

I am the latest firmware of EA2700 but why I can't find there is disable broadcast SSID function?

View 1 Replies View Related

Linksys Wireless Router :: E2500 SSID Broadcast Disabled But Still Shows Up

Dec 1, 2011

why my SSID still displays even though I have the SSID Broadcast "Disabled" for 5 GHz and 2.4Ghz configurations.  The name of my network shows full signal strength and a lock next to the name but I was under the impression if I have disabled the SSID broadcast it shouldn't show up at all and would force a user to manually input the network name when trying to connect to it.  I have the router configured to only allow certain MAC addresses wireless access as well.  Router is running Firmware Version: 1.0.03.Also, my primary computer my iMac running 10.7.2 boots up or is brought out of sleep mode I constantly need to go up to the top of my screen and re-select my network. 

View 4 Replies View Related

Linksys Wireless Router :: Can't Connect TV Or Blu-ray Through WRT54GL

May 2, 2012

I have both a Sony XBR52HX909 and a Sony BDP-S580 connected to my router (WRT54GL)via ethernet. When I try to connect to the internet, both show the wired connection as good but neither can connect to the internet. The BDP-S580 also has wireless connectivity, but it can’t connect to the internet wirelessly. I have two desktop computers connected via ethernet and two laptops connected wirelessly to the same router and all have internet connectivity.  I have tried the “auto” settings on the TV and Blu-Ray player and also tried entering the network information in manually. I still can’t connect to the internet.

View 5 Replies View Related

Linksys Wireless Router :: WRT54GL V1.1 Cannot Get IP Address

Feb 5, 2011

Last week suddenly my internet connection failed. I have tried several times to establish the wireless internet connection. Everytime when i tried to do this, i get the message 'can not get IP address'. Already tried to upgrade the firmware but still same message appears.

View 4 Replies View Related

Linksys Wireless Router :: How To Reset The WRT54GL

Apr 14, 2010

I want to use my router to boost the signal to the 2nd floor of my house, and Im having some problems.When I connect my router to the web application to change restore it to manufaturer setting the router keeps broadcasting my old SSID. The laptops in the house pick up that signal. I want to reset my router so it can broadcast my new network.

View 2 Replies View Related

Linksys Wireless Router :: WRT54GL Cannot Get IP Address?

Nov 10, 2011

I have Wireless-G Broadband router Model WRT54GL. Everything is all setup correct but consoles and handhelds can't get the IP address even if there connected to the router. It isn't intill I turn off and then it back on does it get the ip address.

View 2 Replies View Related

Linksys Wireless Router :: Using WRT54Gl With AT&T U-Verse?

Jun 20, 2012

I'm trying to use a WRT54GL with U-Verse. The problem is that the router does not get a connection to the modem. It can't ping the modem, and it doesn't show up on on the list of devices connected to the modem. DHCP assigns an IP address of 127.0.0.1, which is outside the range of the modem [192.168.1.1 ... 192.168.1.253]. The router is also showing a default gateway of 0.0.0.0, and a subnet mask of 255.0.0.0. (And yes, I have released and renewed the lease, rebooted the modem, and reconnected the modem.) The router WAN side is set to DHCP, and the operating mode was changed from gateway to router (the gateway setting doesn't work either, for that matter).

View 9 Replies View Related

Linksys WRT54GL 802.11a/b/g Wireless Router - 15 Mbps ISP

Mar 16, 2011

I currently own a LinkSys-WRT54GL 802.11a/b/g wireless router, and my ISP is Comcast Cable providing me with 15 Mbps (that's bits per second, I believe) download speed. I am wondering if there is any benefit with using an 802.11n wireless router to access the Internet? The maximum theoretical speed of the WRT54GL router is 54 Mbps (802.11g), which is faster than the 15 Mbps provided by my ISP.

I know that 802.11n has a max bandwidth of 300 Mbps, and it would work for intra- house transfers, such as streaming video from one computer to another.

But is there any benefit to 802.11n for Internet activity, such as web browsing, gaming, and streaming video from Netflix.

View 3 Replies View Related

Linksys Wireless Router :: E4200 - Not Allow Connection To Devices When SSID Broadcast Is Turned Off

Jan 26, 2012

E4200 not letting my known wireless devices connect when SSID Broadcast is turned off.

View 1 Replies View Related

Wireless :: Unable To Access The Linksys WRT54GL Router?

Aug 26, 2011

I had configured the AAA server on CoovaAP and was able to access the internet.I had configured the user name and password as a "testuser" and "password" respectively. With that user id i used to access the Coova AP router and internet.Now i want restore the WRT54GL firmware on Lynksys router. But with the used id and password which i had configured the router is not at all accessible. So i did 30-30-30 reset on the router 2-3 times. Now i can see openwrt login page with 192.168.1.1 IP address. It is asking for user id and password. I tried all the combinations of user id and password, but no luck. I browsed some link on the internet and some people have recommended that default user id as a "root" and blank password. But with that also the router is not accessible. I cant to do much on the router untill i will log in to router. I have spent lot of time on this. How to restore back the original WRAT54GL firmware on my router. Anyhow i want WRAT54GL firmware on Lynksys router

View 4 Replies View Related

Linksys WRT54GL Wireless Router - No Internet Connection?

Sep 7, 2011

I recently had to unplug my Linksys WRT54GL wireless router when doing some rearranging and now i'm unable to get a internet connection. I've confirmed the modem is actually working by connecting my laptop directly (which worked), but when I connect the Linksys WRT54GL wireless router to my modem the internet connection goes away. The connection is lost when connected via wireless and hardwired to one of the back ports. I've tried resetting the modem, router and computer and read every forum out there trying to find something, but i'm still stuck.

View 5 Replies View Related

Linksys Wireless Router :: Can't Set Username And Password On WRT54GL

May 8, 2013

I have a problem with my linksys WRT54GL router.  I entered here [URL] and i set it up, i can connect to internet on my PC and wireless works great but i can't set wireless password and name. When i go to the wireless tab, i write the new name but when i hit seve setting i get disconnected from internet. I try to go to status and click on Connect tab, when is connected internet works but the name and the password of the wireless that i set earlier is reset to default. What do i have to do to set name and password and have internet at the same time.

View 7 Replies View Related

Linksys Wireless Router :: Connect WRT54GL With WRT54G3G?

Jul 8, 2011

I would like to connect my old WRT54G3G router to my new WRT54GL (connect to dsl modem) and have wireless on both activated.I have set both on different channels with same SSID and same passwords on WPA2 Personal AES.I have also made the network IP different WRT54G3G 192.168.0.99 and WRT54GL 192.168.0.98.I have also deactivated network DHCP on 192.168.0.99. and Operating mode to router and still not working.

View 1 Replies View Related

Linksys Wireless Router :: WRT54GL Can't Block Websites?

Jan 24, 2012

not being able to block websites like facebook and youtube on the router.

View 4 Replies View Related

Linksys Wireless Router :: Set Home Page On WRT54GL?

Dec 17, 2011

I am using a WRT54GL for the free wifi service at my business.  Is there any way to set it so that when someone accesses the internet they are directed to my business home page first?

View 1 Replies View Related

Linksys Wireless Router :: WRT54GL - Setup With Switch?

Sep 18, 2012

I want to use a linksys router with a 3com switch. 3Com model 3CGSU08A.i have two routers to choose from a E2000 and a WRT54GL which one is better and settings to use.

View 1 Replies View Related

Linksys Wireless Router :: Cannot Access Already Configured WRT54GL?

Jul 3, 2012

We have received from a customer of us an WRT54GL box configured with a Coova software. This Wifi router was supposed to be a Wifi hotspot, but was not configured by us. This box is able, on startup, to get an IP by DHCP, to touch a remote Radius server, and so on (we "tcpdump" the Internet traffic, and we saw DNS requests, radius requests, ...)...
 
But, we are unable to connect to this box,by SSH or  by HTTP, either by plug-in PC to the Internet RJ45 or the LAN RJ45. It has no IP as 192.168.1.1. Instead, it was configured to have 192.168.1.1 as gateway.
 
Of course, we have no doc on previous install, but only the admin/root password for SSH.We are afraid to lose the config (coova, ...) if we perform a hard reset.What is the best way for connecting on this box ?

View 1 Replies View Related

Linksys Wireless Router :: DHCP Reserve On WRT54GL?

Oct 24, 2009

Why this router have DHCP server and Port forwarding features and many LAN ports, but does not have DHCP reserve feature? If I can plug many computers, each one get own IP address, but how I can't fix it? I need to port forwarding of course, but if lease time ended, next time my computer got other IP address, so I need to reconfigure port forwarding each time! Of course I can do it, but try to explain it for your wife? Yes, I can use static IP addresses, but for what this box have DHCP server?

View 9 Replies View Related

Linksys Wireless Router :: WRT54GL - WLAN Flashes More Often

Feb 13, 2012

I accidentally pressed the front panel button labeled "Cisco Systems" on my WRT54GL wireless router.  The button turned to a flashing white which I understand means that it entered SecureEasySetup mode.   I then power cycled the router and the front panel button turned back to solid orange.  However, now the "WLAN" lamp flashes a lot more often than before even when there are no wireless clients connected. It doesn't seem to be affecting connectivity or performance of my Ethernet connected devices or wireless connected devices. I re-entered my SSID and security key.  That didn't curtail the increased flashing of the WLAN lamp. I also tried pressing the front panel button for 5 seconds.   This only cleared my wireless settings.

View 2 Replies View Related

Linksys Wireless Router :: Network Speed On WRT54GL

Jun 24, 2012

I have a 16mbps (megabits) cable modem that is connected to WRT54GL. Desktop is located next to router and is connected with a cable, Laptop is connected on Wi-Fi. Both PCs achieve maximum speed when downloading from the internet but when I try to copy something from one PC to another over the local network I get stuck on max 2.5-3MBps (megabytes).

View 4 Replies View Related

Linksys Wireless Router :: WRT54GL - IPhone 4G Will Not Connect?

Jul 13, 2012

I'm using a WRT54GL(4.30.14) Router with a Charter Cable Modem running 5 computers on the network with 1 being wired and the rest are wireless. When my family comes over they can connect with their iPads and laptops but for some reason I can not get this iPhone 4G to connect. We put in the password and it says unable to connect. Are there any special settings that need to be made to the router to let the IPhone connect?

View 3 Replies View Related

Linksys Wireless Router :: Configure WRT54GL As Vpn Client?

Dec 2, 2011

Connect my linksys WRT54GL router to the proxpn vpn privacy service as a client? (or any other vpn privacy service for that matter)  I already have an internet connection up and live with a cisco router so I would need to connect the linksys to the cisco and use the linksys as a vpn gateway kind of thing, so that any computer connected to the linksys will automatically be in the vpn tunnel without needing any cleint software installed on it. The vpn service I use is proxpn but they won't support the settings of individual routers (understandable). The only setting they give for a PPTP connection is here

[url]...

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved