Apple Time Capsule Not Assigning IP Addresses?
Jan 6, 2012
Briefly here is my setup Internet is supplied to my building by ISP(I have no router) => apple time capsule connected by Ethernet.I have used WIFI to connect all of my devices in the past with no problem until i moved into this place. I have 2 macbooks that can connect without any issues Every single other device in the house cannot connect and does not receive a proper IP Address. The ones being assigned are in the 169.xxxxxx range. Even if i plug my Imac (which cant connect) directly in from the wall via ethernet, it wont connect.The time capsule is setup as a bridge with DCHP set to run automatically. I have reset everything numerous times and restored the router to no avail.I called the ISP and they said it wasnt their problem. I was under the impression they werent assigning the IP Address correctly or something.
View 1 Replies
ADVERTISEMENT
Dec 2, 2011
I've brought a SG300-10 switch and would like to connect it to an Apple Time Capsule (as the base station of my wireless network), Apple Airport Extreme (to extend my wireless network) and 3 x NAS. What is the best way to connect?
Internet > SG300 > Apple TC + NAS x 4 + Apple Airport Extreme (to extended my wireless network) + Mac Pro/iMac'sInternet > Apple TC > SG300 > NAS x 4 (connect to the SG300) + Apple Airport Extreme (to extended my wireless network) + Mac Pro/iMac'sI need the SG300 because the Apple TC doesn't have enough network ports to cennect all my other devices.
View 1 Replies
View Related
Aug 17, 2012
I try to connect my LinkSys wrt320n with Apple Time Capsule with mode "sahring existing wireless network" and so Time capsule doesn't work. It gets IP, but writes "isn't internet connection, WiFi network don't find" and also in the admipage of my wrt320 I can't see Time Capsule as client.
View 4 Replies
View Related
Apr 24, 2012
time capsule can be the same as the router settings?
View 1 Replies
View Related
Aug 5, 2011
At home I have been trying to set up this Time Capsule as a Router. url...I am trying to set this up for both Macs and PCs. I have set it up as described in the manual and can now find it on all machines in the house and can connect to it wirelessly. I an also plug it into a desktop and get the same issues. So its not a wireless issue.The issue is here. The computers can get email, POP i believe, but no internet.I cannot ping anywhere, and have tried browsing by names, and IPs to no avail. When I ping google.com it says could not find the url.... Ive also tried Telnet. I tried Telnetting the router IP on port 80 however could not figure out what the IP is. I was looking for the 192.168 etc.
View 5 Replies
View Related
Jan 29, 2011
I have set up a home network with Time Capsule as the primary router. I would like to use my WRTG54GL to connect to the network via ethernet and extend it for wireless access at the opposite end of my house. I changed the settings to disable the DHCP server, I named the network the same as the Time Capsule and duplicated security mode and password. I can connect with my laptop, but it initially connects with full internet access, but after about 10 seconds, I can see Airport searching for a network. It reconnects, but for about 45 seconds I have no internet access and then access returns and works fine. On my iPad, however, although it shows I am connected to the network, there is no signal indicator at the top of the screen, and all connectivity seems to be through 3G -- not the network. I assume there is a setting on the Linksys that needs changing, but I can't figure out what it is.
View 10 Replies
View Related
Feb 11, 2011
a colleague at my university is using an Airport Time Capsule 1TB (Model A1355) to share files with his students wirelessly. The machines are running Leopard 10.5.8 and It works well but it will only allow 20 wireless clients at a time. All the client machines log in with a password. When you remove one of the 20, another can log in.
The tech specs on the Apple website just say that it accepts Wireless guest access and there is no mention of a 20 client limit. I looked right through Airport Utility and couldn't find where the number of wireless clients could be configured.Does anybody know if this is the hard limit for the number of wireless clients for an Airport Time Capsule 1TB (Model A1355)? If it is not a hard limit does anybody know how to change it?
View 3 Replies
View Related
Mar 14, 2012
I have a Time Capsule current generation, as my primary router connected to my ISP. I'm using a Linksys E4200 as my slave router connected to the Time Capsule via lan to lan. I noticed the TC Internet Connection TCP/IP via DHCP shows a Subnet Mask of 255.255.248.0 and the Surewest IP of 74.222.246.23
Is the 248 setting one I will need on the slave?
The TC IP Address is 10.0.1.1 the DHCP Beginning Address is 10.0.1.3 to allow for the slave to have 10.0.1.2.
The E4200 is set as follows on the routers setup page, Internet Section to Automatic DHCP, Network Section to IP 10.0.1.2 Subnet Mask 255.255.255.0 and DHCP is Disabled.
Both routers have a SSID set to the same name.
Are all these settings correct? I've noticed that a device iPhone or iPad etc has a different IP address assigned by the TC depending on which router it is actually connected. I've also noticed difficulty of a device on one router communicating with one on the other.
View 1 Replies
View Related
Jan 5, 2013
is it possible to setup a wired local area network using time capsule 2T as the router?
View 1 Replies
View Related
Aug 15, 2012
I'm looking to buy an EA3500. I want to hook an external drive to the USB port and use it as a Time Capsule drive with Mountain Lion. Is this supported?
View 5 Replies
View Related
Feb 8, 2011
I have a Tenda W300d modem/router that works fine sometimes, but others, like now, it's being a real pain and not connecting with some of my devices, I have a PC, laptop, PS3 and phones that mostly happily share connection, the PS3 is connected via cable.sometimes it just won't allow things to connect, I try rebooting it, sometimes it works, sometimes not.IS there something basic I'm missing? the control panel for it seems quite comprehensive, but I'm no expert at it.
View 6 Replies
View Related
Jan 16, 2013
I have two WAP4410N devices on my network.When I try to connect with a wireless device (iPad, Smartphone, etc...) it does not connect.However, if I assing that device a static IP, it connects.Here is the setup:
-2 WAP4410Ns that have static IP's assigned to them. They plug into my 3560's
-Three Cisco Catylist 3560, one of which is my Default Gateway.
-Windows 2008 Server R2 (Domain Controller, DHCP, DNS)
View 1 Replies
View Related
Feb 13, 2012
problem I have encountered with a Cisco E4200v2 router (with current firmware update) which is just over three months old. The other day my internet connection (cable "always on") hiccuped a couple of time (which is not unusual for this area). However, when the service finally restored itself, I lost a PC and printer from my home network, and the ability to connect to the internet with the wired PC. Outages like this are normal in this area and have not had an issue like this before. Both were "wired" via (CAT 5e) cables. The three PC's that were connected via wi-fi were not affected. We switched CAT 5e cables several times with not changed in status. The wired printer and PC were assigned arbitrary ip addresses in the 16X.XXX etc. range. I think that has to do with not being able to communicate with the DHCP server? However, we connected one of the laptops via a CAT 5e cable directly to the router, and it too was assigned an arbitrary ip address. I finally reverted to my old router (LINKSYS WRT160N), and the issue went away. Is this a known E4200v2 issue? Is there a fix or workaround for this? The "wired" PC and two laptops are Windows 7, and the all-in-one is running Vista.I can continue using my WRT16N. But hate to think I wasted good money on this new dual band. Have never had any issues before with Linksy/Cisco before.
View 8 Replies
View Related
Oct 10, 2011
We have a Cisco 4400 controller and a mix of 1010 and 1131 access points.
We have been running out of IP's on our DHCP server because the apple devices are not releasing there IP's.
View 1 Replies
View Related
Oct 22, 2012
A customer of ours has the following access points and wireless lan controllers on site. They want to use the Apple Bonjour service with Apple TV's and iPads. I have enabled multicast feature of the 5508 globally and one the SSID.The Apple TV has an ethernet connection and the iPads connect over the wifi. The Apple tv is on the same subnet as the iPad's - the Bonjour features do work for approx 5/10 minutes then it stops working for some reason. The Access Points plug into a Cisco 2960 Layer 2 switch, the 5508 controllers plug are in LAG mode and plug into a Nortel Layer 3 stack which I have enabled IGMP snooping.I've read that the Apple Bonjour service isnt designed to work on a multi subnet network - but both the Apple TV and iPad are connected on the same subnet. Sounds like some kind of timeout but not too sure.
View 5 Replies
View Related
May 15, 2013
how to setup the wireless interface to forward multicast packets? Basically I cant get the ipads etc.. to see the AppleTV to control it. I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface. I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.
View 1 Replies
View Related
Oct 8, 2012
In setup for old RV042 (V1), when updating / adding Mac addresses, the table is always sorted by IP addresses. But in the new oneRV042 (V3) I have, even with latest firmware 4.2.1.02 the list is random, thereby increasing the chance of user entering DUPLICATE IP addr with diff Mac addr. That will result in conflict.If the firmware sorts the DHCP entries by ip addresses, user would be able to catch duplicate ip errors even if the system does not flag the errors. All Cisco smart engineers can you all get the dhcp entries SORT by ip addresses.
View 2 Replies
View Related
May 17, 2011
My local DHCP server mis-assigns IP Addresses of 192.168.x.x to laptops every morning.It has been suggested that one of my print servers (two Fierys and a Creo) is pushing 192.168.x.x onto the network but I think I've ruled that out. have an XP Pro desktop running a standard Windows bridge that connects a wireless Netgear router to the local Cisco switch. This has worked flawlessly for a couple of years so I hesitate to blame the bridge.My remote IT dept pushed a change/update to all locations having to do with address lease duration. I do not know details.Is there a way I can identify the source of the problem if I do not have admin access to the DHCP server? The only local control I have is to cycle power.
View 13 Replies
View Related
Aug 26, 2011
I got a new modem today (a Cisco DPC3825) and it seems to be presenting a problem. I used to be able to simply and quickly change my IP address, by changing the MAC address though my Netgear router. Now when I do that, I can see the IP address has changed in the router settings, but when I double check it using ipburger.com, the IP address does NOT actually change, but remains the same.
View 4 Replies
View Related
May 20, 2011
I posted of an issue we were having but I feel like I was getting ahead of myselfBasically I need to know how to do 2 things.I want to assign a static IP I purchased from Comcast to my Netgear N300 router and then in turn want that IP address to be linked to the server here in our office so that when people use the Remote Desktop Connection it directs them to the proper machine.
View 5 Replies
View Related
May 26, 2012
I am trying to give an static ip address to a time clock on my network and for some reason when I connect time clock to network it will always get an ip address from a different network. for example my computer IP address is 192.168.2.70 when connected to network, my default gateway is 192.168.2.1, the IP address that the time clock always gets is 192.168.1.120, there is no way to tell the time clock what IP address I wanted to be it has to get it from router (that is what the manufacturer told me), router (16portLiksys) does not have DHCP enabled the guy who set up network left it disabled, on his notes he says server (dell server T110) is acting as router is that true that a server can be acting as router?what do guys think is going on here?all the computers hooked up to network have static IP address.I also notice that when I connect a computer to router it will get an IP address from different network the same as time clock.I tried to reserve ip address on router by entering MAC address from time clock but it won't work. I am not very familiar with the server settings I have not try changing settings on server, I am not even sure the guy who set up network is right about using server as router.
View 1 Replies
View Related
Oct 26, 2011
I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies
View Related
May 1, 2012
I recently purchased a X2000 ADSL modem/router combination. For some reason the current time will not stay set to the time zone. Rebooting clears the discrepancy for a short time before it drops an hour exactly. I'm in the central time zone and the setting are correct on the basic setup.?
View 1 Replies
View Related
Jan 17, 2012
Is the WAG320N iPv6 compatable ? ,or could it be with a firmware update ?.Is the X2000 in the same boat in iPv6 terms as th WAG320N ?.Is there a way of retrieving "UPTIME" / "DSL connection time" information from the WAG320N and also line attenuation stats etc.Wouldn't need the above but poor isp needs keeping an eye on.
View 3 Replies
View Related
Jan 4, 2011
I have one 2621 router i want to creat time base access list so that one of my subnet user(10.128.194.0 255.255.255.128) use only internet between 11am to 2pm.
View 15 Replies
View Related
Jul 8, 2012
I just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT". I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.
View 5 Replies
View Related
Nov 7, 2012
I am doing Activity 6-1: Basic VLSM Calculation and Addressing Design (6.4.1) in the ccna book.the lab can be seen here: (mellowd - link removed) I've done the topology and assigned the addresses appropriately as shown in the first table. My question is on Task 2 Step 2."Assign the first available subnet to HQ LAN1."
View 4 Replies
View Related
Jan 7, 2013
HP wifi printers (I've had 2 over the last several years)eventually have a disconnect with my wifi router and was told (by an experienced IT guy from my last job) I should assign the printer a static address to eliminate the problem. How can I assign a static address to my printer. Here are the models Router: Belkin model F5D9231-4v1(01); Printer HP Officejet 6600. I know how to access the printer and manually enter an IP address and subnet and such, I just don't know which numbers to use where. I also know how to access my router, via typing in the IP address in Internet Explorer, but i'm unsure of which tab within the router's page (i.e. is it category wirelessunder MAC address control) or which numbers (IP address or MAC Address)and where should I get the correct numbers from (i.e. go run, cmd,IPconfig/all).
View 6 Replies
View Related
May 4, 2012
For over a month I am trying to find a way that makes me able to use two internet connections at the same time, and assign certain programs to one connection. This is because me and my brother do game on the ADSL cause of the low latency of it, when one of us do surf the whole connection lags. I do have 2 internet connections at home, one is ADSL(1.5MB Connection) and one is WiMAX(10MB Connection). Both of these routers/modems are connected to the same network. I want to use the ADSL for gaming(light usage) and the WiMAX one for browsing and downloading(heavy usage).
I came up with three ways:
1) ForceBindIP - (1) (2) - Didn't work for me with Windows 7 64bit on Firefox 12.0
2) Using VMWare - Which I do not want to.
3) Using Astaro Security Gateway Home Edition - Which is a bit complicated and I have to run a dedicated PC for it with special setup in order to make it work (Live Demo)
ADSL:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
WiMAX:
IP: 192.168.1.2
Netmask: 255.255.255.0
View 5 Replies
View Related
Aug 14, 2012
i need to draw a picture of a network being divided into two buildings one with 100 connections and the other with 560 connections and also need to assign ip and subnets on them. how many routers do i need for this?what class of ip do i need to use?what are the subnets
View 13 Replies
View Related
Jul 1, 2012
I am using Windows 2011 SBS and Windows 7 clients.My server has a DHCP range of 192.x.x.150 to 192.x.x.199 and all other I.P. addresses are static. On a workstation located at I.P. 192.x.x.13 I am seeing an address conflict.When I perform an "nbtstat -a 192.x.x.13" command from the server I am given the logical computer name of a staff members personal laptop.Investigation of the laptop reveals that it is set to DHCP, and clearly the address of 192.x.x.13 is outside of my servers DHCP scope, so this I.P.should never be assigned, let alone in duplicate.I Google this topic before posting, and it was suggested that IPv6 could be having an adverse affect. I determined this because I performed a ping on the laptop and only got a MAC address back rather than an I.P. address.However after unticking IPv6, and rebooting, the laptop is still causing havoc.I can set a static I.P. address on the laptop, however this is not ideal.
View 2 Replies
View Related
Oct 12, 2011
We once had a virtual server with two network adapters, one was internal and the other was external, and people could access it directly from the internet.
That server recently, died (someone put the .VHD file on a massive RAID 0 array, and that went boom), and I need to set it back up again. All the DNS entries appear to still be there, but how to assign the external IP to the network adapter. I tried Google, but my Google-fu must be weak today as I can't find anything useful.
It's a Server 2008 R2 machine running inside Hyper-V. Nothing's changed except for the new Windows install, it's running with the exact same VM settings, which I didn't touch except to add a new VHD.
View 5 Replies
View Related
Sep 17, 2012
Is it possible to assign a L3 switch port with a public IP? How do you rallow data from the Internet to the above port, if possible?
View 5 Replies
View Related
