i need to draw a picture of a network being divided into two buildings one with 100 connections and the other with 560 connections and also need to assign ip and subnets on them. how many routers do i need for this?what class of ip do i need to use?what are the subnets
View 13 Replies
Plan a network to Connect 2 buildings 3 storey high with a distance of 500m between each building. Each floor is occupied by the Finance Department, Administration Department and Computing Department.the report should have the following items. Anything extra is encouraged.
a. Introduction
b. Network Diagrams
c. Devices that will be used.
I am doing Activity 6-1: Basic VLSM Calculation and Addressing Design (6.4.1) in the ccna book.the lab can be seen here: (mellowd - link removed) I've done the topology and assigned the addresses appropriately as shown in the first table. My question is on Task 2 Step 2."Assign the first available subnet to HQ LAN1."
View 4 Replies View RelatedTwo buildings on same farm property 660 feet apart. Cable internet to one building does not reach 660 feet to second building and the cable company will not put it in. Wireless between the buildings is not out of the question; but, I've never done anything this distance before and I am concerned that signal loss over 660 feet might degrade throughput.
So, what is a feasible way of getting the signal from the first building 660 feet to the second building?
I've recently lost my ability to access the internet at uni and as this is quite an inconvenience I am considering some alternatives, the most viable one I've managed to come up with hinges on the fact that I live in a building which is only a road and another building away from the main uni buildings (3 buildings on 2 city blocks), basically it looks like this: UNI BUILDING 1 | UNI BUILDING 2 |ROAD| UNI BUILDING 3 |ROAD| MY APARTMENT.So I'm thinking of building one of these: url.. or waiting for the r20000g (dual band) to come out and buying that.THEN the area I'm having a bit of trouble with: I need to get reception about 600-700m away through buildings, so I've been looking at Yagi antennas and such but can't seem to find any information on the following:
1. Will a high powered directional antenna go through a few buildings and still make it 1km (.6 miles)
2. How directional is a directional antenna? like if I point one in the general direction of the building how accurate do I have to be? (I have no problem buying 4-5 antennas if I need to)
3. Do I need a new Wi-Fi antenna for my laptops? it seems odd to me that a laptop would be able to transmit back 1km while I need a giant antenna to get to the laptop (I know its not this simple but it still seems odd)
How to design network with two buildings. each buildings five- storey buildings.buildings 1 has 200 computer and buildings 1 has 150 computer. which topology and cabling to use
View 2 Replies View RelatedI've been in a home office for the past 2 years with 30mb internet, but I will be getting an office soon downtown. The building I'm moving into has free wifi, what is my best option to connect to this with my desktop?
1. Using an ethernet cable from my desktop to my ASUS rt-56n router as a bridge to connect to the buildings wifi.
2. Buying a wireless adapter to connect to the buildings wifi.
My phone only gets 2 bars when connecting so I'd like to know which of the options above will give me a faster and more reliable connection.
1) I have 5 buildings
2) They can not see to each other
3) But they can see a mast in a mountain
4) Distance between buildings and the mountain is 3 km
Question is...
How many BR350 do I have to use?How many and what type of antennas do I have to use?
I need to a run an Ethernet network between 2 buildings 1000ft apart. The buildings are in a forest so I don't think wireless is possible. What kind of cable can I run between the two buildings and what type of adapters do I need on each side?
View 7 Replies View RelatedI have two buildings on my property that I need to network together. One is my home about 3500 Sq. Ft. and the other is a garage about 3000 Sq. Ft. The two buildings are about 250 feet away from each other. Both are fed from the same utility pole that is half way between them. That means both are on the same transformer, but each has its own metered electrical service.Right now I am using 10 Mb. Home Phone Line network adapters. They work OK but data speeds are limited to about 5 Mb. of throughput and the adapters are no longer available. I also have WiFi at both locations but neither one will talk far enough to cover the other building.I also use X10 remote controls in my house. I have tested them from the house to the garage and they do not work at all over that distance
View 7 Replies View RelatedI have 2 of these in a Bridge between 2 buildings. Cisco support replaced them with 2 BRAND NEW units after 6 weeks of waiting, that do the same thing. Spent so many hours on these turds it is insane. the thing goes down with the wind, tinker with it and maybe you will be up for a few hours or days then back to down again. Thinking it has something to do with the firmware or a power saving thing. Works great when it is up though. I am still trying stuff to get it to work stable. To much money invested in them now to start from scratch but they wanted budget equipment in place and not Cisco Aironet.
View 3 Replies View RelatedI currently have WLC 5508 and a few campuses with LAP 1142, each with 2-3 vlan. Now one of our campuses have a building thas is a bit far away and needs network (wired). We can't get fiber or TP-cable there in a good way. So the plan is to get two 1262 or 3500 with AIR-ANT5160NP-R antennas and get a wireless link working between the campus and the building. And then connect one of the AP's to a switch in the other building to provide it with wired network.
The problem is that I can't find information on how to do it. Should both APs be in autonomus mode? I probably only need to have 1 VLAN in the other building but I am not sure yet. Is there a problem with transfering several VLAN over the WLAN-link?
I have 2 - 1410 bridges ( point to point) between two buildings approx 600' apart. They seem to be aligned well ( Signal -52dBm, SNR 41 ) and have been very reliable. However, I cannot seem to run more than 26Mbps thru them.is there any recommended tweaking that can increase my throughput ?
View 2 Replies View RelatedA 500 ft Ethernet run with a mid-point POE extender, what should I use on both ends for best results? Looking for a possible switch at the termination end. I'm using enhanced Cat5E cable.CGMAN
View 10 Replies View RelatedI am having a problem in connecting two Cisco 2960 Switches between two different buildings using Cisco WLC 2504 & 3 Wireless 1552S APs.
- One AP is directly connected to Switch - 1 where WLC is connected and serving as a RAP
- Another one is working as Mesh in the field.
- Third one is a Mesh Access Point wired to another Switch - 2. (Bridging is enabled)
All the APs, WLC & switches are in the same network 10.3.x.x subnet mask : 255.255.240.0?WLC is working with default management interface whereas switches are having VLAN1 configured as default VLAN.All the port for the switches are Trunk ports?Once i am trying to ping the RAP or any MAP from Switch - 1 I am sucessful but once i am pinging Switch - 2, its not replying. Similar is that case from Switch - 2 side.
What I am trying to do is I have one switch with say a 10.1.9.1 sub-net I need to have one of the ports to be trucked with two vlans one for DSL and the other for a local connection with the sub-net of 10.1.5.1 both of the sub-nets are configured in the core as 9 and 5 so I have port 0 set up as a trunk and it is set up as ge-0/0/0.0 vlan_5, vlan_192 on the 10.1.9.1 subnet switch. The DSL is working but the local is not pulling a 10.1.5.1 IP and has no connectivity. Everything looks as if it is configured correctly but still the DSl is working but not the Local connection.
View 2 Replies View RelatedI recently installed a very basic version of XP on my old laptop (Gateway MT3707).After hours of searching for the correct drivers, I found them, and installed them. After installing the correct drivers for wireless internet I was able to pull up the list and find my network on it.When double clicking on our wireless network it asks for a network key (also called WEP key or WPA key).Now we have a password for our network, but after an exhausting amount of tries that won't work. I not sure if that is what its looking for. In our apartment we run mac OSX, windows vista, etc., but usually the password for the network is satisfactory. I have never ran into this problem.I hate to be a noob, but I don't know where to go from here.
View 6 Replies View RelatedMy local DHCP server mis-assigns IP Addresses of 192.168.x.x to laptops every morning.It has been suggested that one of my print servers (two Fierys and a Creo) is pushing 192.168.x.x onto the network but I think I've ruled that out. have an XP Pro desktop running a standard Windows bridge that connects a wireless Netgear router to the local Cisco switch. This has worked flawlessly for a couple of years so I hesitate to blame the bridge.My remote IT dept pushed a change/update to all locations having to do with address lease duration. I do not know details.Is there a way I can identify the source of the problem if I do not have admin access to the DHCP server? The only local control I have is to cycle power.
View 13 Replies View RelatedI got a new modem today (a Cisco DPC3825) and it seems to be presenting a problem. I used to be able to simply and quickly change my IP address, by changing the MAC address though my Netgear router. Now when I do that, I can see the IP address has changed in the router settings, but when I double check it using ipburger.com, the IP address does NOT actually change, but remains the same.
View 4 Replies View RelatedI posted of an issue we were having but I feel like I was getting ahead of myselfBasically I need to know how to do 2 things.I want to assign a static IP I purchased from Comcast to my Netgear N300 router and then in turn want that IP address to be linked to the server here in our office so that when people use the Remote Desktop Connection it directs them to the proper machine.
View 5 Replies View RelatedI am trying to give an static ip address to a time clock on my network and for some reason when I connect time clock to network it will always get an ip address from a different network. for example my computer IP address is 192.168.2.70 when connected to network, my default gateway is 192.168.2.1, the IP address that the time clock always gets is 192.168.1.120, there is no way to tell the time clock what IP address I wanted to be it has to get it from router (that is what the manufacturer told me), router (16portLiksys) does not have DHCP enabled the guy who set up network left it disabled, on his notes he says server (dell server T110) is acting as router is that true that a server can be acting as router?what do guys think is going on here?all the computers hooked up to network have static IP address.I also notice that when I connect a computer to router it will get an IP address from different network the same as time clock.I tried to reserve ip address on router by entering MAC address from time clock but it won't work. I am not very familiar with the server settings I have not try changing settings on server, I am not even sure the guy who set up network is right about using server as router.
View 1 Replies View RelatedHP wifi printers (I've had 2 over the last several years)eventually have a disconnect with my wifi router and was told (by an experienced IT guy from my last job) I should assign the printer a static address to eliminate the problem. How can I assign a static address to my printer. Here are the models Router: Belkin model F5D9231-4v1(01); Printer HP Officejet 6600. I know how to access the printer and manually enter an IP address and subnet and such, I just don't know which numbers to use where. I also know how to access my router, via typing in the IP address in Internet Explorer, but i'm unsure of which tab within the router's page (i.e. is it category wirelessunder MAC address control) or which numbers (IP address or MAC Address)and where should I get the correct numbers from (i.e. go run, cmd,IPconfig/all).
View 6 Replies View RelatedFor over a month I am trying to find a way that makes me able to use two internet connections at the same time, and assign certain programs to one connection. This is because me and my brother do game on the ADSL cause of the low latency of it, when one of us do surf the whole connection lags. I do have 2 internet connections at home, one is ADSL(1.5MB Connection) and one is WiMAX(10MB Connection). Both of these routers/modems are connected to the same network. I want to use the ADSL for gaming(light usage) and the WiMAX one for browsing and downloading(heavy usage).
I came up with three ways:
1) ForceBindIP - (1) (2) - Didn't work for me with Windows 7 64bit on Firefox 12.0
2) Using VMWare - Which I do not want to.
3) Using Astaro Security Gateway Home Edition - Which is a bit complicated and I have to run a dedicated PC for it with special setup in order to make it work (Live Demo)
ADSL:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
WiMAX:
IP: 192.168.1.2
Netmask: 255.255.255.0
I have a Tenda W300d modem/router that works fine sometimes, but others, like now, it's being a real pain and not connecting with some of my devices, I have a PC, laptop, PS3 and phones that mostly happily share connection, the PS3 is connected via cable.sometimes it just won't allow things to connect, I try rebooting it, sometimes it works, sometimes not.IS there something basic I'm missing? the control panel for it seems quite comprehensive, but I'm no expert at it.
View 6 Replies View RelatedI am using Windows 2011 SBS and Windows 7 clients.My server has a DHCP range of 192.x.x.150 to 192.x.x.199 and all other I.P. addresses are static. On a workstation located at I.P. 192.x.x.13 I am seeing an address conflict.When I perform an "nbtstat -a 192.x.x.13" command from the server I am given the logical computer name of a staff members personal laptop.Investigation of the laptop reveals that it is set to DHCP, and clearly the address of 192.x.x.13 is outside of my servers DHCP scope, so this I.P.should never be assigned, let alone in duplicate.I Google this topic before posting, and it was suggested that IPv6 could be having an adverse affect. I determined this because I performed a ping on the laptop and only got a MAC address back rather than an I.P. address.However after unticking IPv6, and rebooting, the laptop is still causing havoc.I can set a static I.P. address on the laptop, however this is not ideal.
View 2 Replies View RelatedWe once had a virtual server with two network adapters, one was internal and the other was external, and people could access it directly from the internet.
That server recently, died (someone put the .VHD file on a massive RAID 0 array, and that went boom), and I need to set it back up again. All the DNS entries appear to still be there, but how to assign the external IP to the network adapter. I tried Google, but my Google-fu must be weak today as I can't find anything useful.
It's a Server 2008 R2 machine running inside Hyper-V. Nothing's changed except for the new Windows install, it's running with the exact same VM settings, which I didn't touch except to add a new VHD.
Is it possible to assign a L3 switch port with a public IP? How do you rallow data from the Internet to the above port, if possible?
View 5 Replies View Relatedwe have cisco wlc 4404. and we want to access it thru internet.
i have attached the management interface screenshot.
I have a win xp system which connects to internal network & Internet. The problem I have is, for each work i need to change the IP address.
Ex: For internal network the ip should be 192.168.0.1 To connect to internet the ip should be 192.168.1.1
Now I want to be connected to both internal network as well as internet at the same time. So what should I do ?
* I can not add another physical network card.
* I can not change the IP's of any other system or config servers etc... (as it is used by our internal application, doing so will make a mess.)
* I have the admin rights so any software changes to my system can be done.
So i was hoping to add a virtual network card, and configure it to the new IP. So can that be done ? if so how ?
I just got a brand new laptop and I can't get it to connect to LAN.It's plugged in to the same hub as my main machine and I can't even access my router UI.It's not the cable because I tried plugging in my main machine's cable to the new laptop and the same thing happens.ipconfig reveals an Autoconfiguration IPv4 Address of: 169.254.197.187 But that number should say 192.168.1.1xx I've tried uninstalling and reinstalling the Ethernet driver as well.I've tried resetting the router and modem.I've tried resetting TCP/IP.
View 13 Replies View RelatedBriefly here is my setup Internet is supplied to my building by ISP(I have no router) => apple time capsule connected by Ethernet.I have used WIFI to connect all of my devices in the past with no problem until i moved into this place. I have 2 macbooks that can connect without any issues Every single other device in the house cannot connect and does not receive a proper IP Address. The ones being assigned are in the 169.xxxxxx range. Even if i plug my Imac (which cant connect) directly in from the wall via ethernet, it wont connect.The time capsule is setup as a bridge with DCHP set to run automatically. I have reset everything numerous times and restored the router to no avail.I called the ISP and they said it wasnt their problem. I was under the impression they werent assigning the IP Address correctly or something.
View 1 Replies View RelatedI'm using MAC address filtering on my network, and have no problem adding new devices as and when we purchase them. However, a lot of these items such as smart phones with wi-fi, Kindles etc don't seem to have a name that identifies them on the device info page. All of our laptops and desktops are identified, but none of the phones etc. Is it possible to assign names to MAC addresses at all?
View 1 Replies View RelatedI am replacing an older AP with a new 1252 unit. I attached everything and powered it up, but my DHCP server does not appear to be finding it and assigning an IP address. The status light stays green and the ethernet light blinks randomly green. Seems to be connected fine, but without an IP I cannot configure it to use it.
View 2 Replies View Related
