What To Set Ip Lease Time On Router / Modem

Jul 23, 2011

I have a smc wireless cable modem gateway router lease is set to expire every 7 days does it matter if its like more often, is this good enough, i was told every day might be better as i get better connection.

View 2 Replies


ADVERTISEMENT

D-Link DIR-655 :: Impossible To Change Dhcp Lease Time On DSL-320B Modem

Apr 1, 2011

I use an adsl router DSL-320B to connect my Linux server (Fedora 12) to the web.I noticed in my logs that it was renewing its ip about every 30s.

View 1 Replies View Related

Linksys Wireless Router :: How To Change Dhcp Lease Time On Wrt120n

Sep 25, 2011

i cant seem to change my dhcp lease time even though i change my Client Lease Time to 1 day.

Firmware Version:v1.0.06 build 001 Apr 29 2011 11:08:40Boot Code Version:v0.03Firmware Verification:Current Time:Sun, 25 Sep 2011   10:15:32 PMInternet MAC Address:Host Name: Domain Name: 

View 6 Replies View Related

Linksys Wireless Router :: E3200 Client Lease Time Settings For Printer?

Jul 7, 2011

Can the client lease time be set to never expire to prevent loss of connection for wireless printer with a permanent ip address on E3200? Or is there another way to ensure continuous connection?

View 6 Replies View Related

Linksys Wireless Router :: E2500 Fails To Set DHCP Lease Time From Upstream

Jun 11, 2012

we finally got my Cisco refurbished E2500 configured and working downstream from a UVerse 3801HGV box. We had to change the default IP address of the 3801 because it conflicted with the E2500's default. The E2500 is set up to get its Internet IP address using DHCP from the 3801.  This is working fine for normal web browsing, etc.  However, anything that requires extended connections (downloads, streaming, etc) freezes after a couple of minutes, forcing me to refresh the action to get it started again.  Extremely annoying to say the least.

I'm pretty sure that I've tracked it down to the E2500's configuration of the 3801's DHCP allocation.  For some reason, the E2500 wants to set the DHCP Lease Time for the 3801's assigned IP address to 10 minutes regardless of the upstream settings from the 3801.  The 3801's default is 24 Hours which I've changed to 168Hours (7 days), but the E2500 stays stuck at 10 Minutes. Specifically, I'm referring to the setting displayed on the E2500 under Status>Router>Internet Connection IPV4>DHCP Lease Time. 

View 9 Replies View Related

Linksys Wired Router :: WRT54G Maximum Value For DHCP Client Lease Time?

Jun 26, 2011

On the BEFSR41 v1 series and WRT54G series, what is the maximum value for the DHCP "Client Lease Time (in minutes)?"  It seems that 2^16 -1 (65535) minutes is the max.  This is about 45 days.  has the max value changed with newer versions  of these devices?

View 1 Replies View Related

Linksys Wireless Router :: EA6500 - Change DHCP Client Lease Time From 1440 To 480 Minutes

Apr 2, 2013

I'm trying to change the DHCP Client Lease Time from 1440 minutes to 480 minutes.  When I try to apply the new settings, I'm getting a message that says "Invalid Characters" and it won't stick. I've tried this in three different up-to-date browsers (ie10, Chrome and Firefox).  Also, I'm connecting locally through LAN and I have the latest EA6500 Firmware: 2.1.39.145204

View 2 Replies View Related

Belkin Routers :: F5D-8636 - Can't Change Lease Time

Mar 26, 2013

N-Wireless modem Router F5D-8636 will not let me change the lease time from half an hour?

View 1 Replies View Related

Cisco Routers :: RV042 Fails To Obtain WAN IP Address Infinite Lease Time

Aug 24, 2011

I just got a new RV042. V3 Hw.For setup and testing before putting it in action, I've attached the WAN1 side to my internal network.But it fails to get an IP address, and the log shows: "Infinite lease time, exiting".My current router on the LAN is giving out DHCP addresses with 3 hour lease time, and I've checked with the PC's on the LAN that this is correct.The routers DHCP status shows that the lease time for the RV042 is 3 hours ahead.So why does the RV042 complain about long lease time ?Is there a way to avoid this error from occurring?
 
I have tried to change from 'Gateway' to 'Router', but this does not change anything.Also tried a factory reset, with no luck.Fw is upgraded to the latest 4.0.4.02

View 2 Replies View Related

Set Modem / Router To Auto-switch Off At Particular Time?

Apr 11, 2012

I usually put some stuff up for downloading and go to sleep. Now I setup my computer to auto-shutdown at a particular time via cmd, but I want o know whether it is possible for me to put some time settings in my modem+router so that it switches off at a particular time or something like that.Then when I get up next morning, start using it again. I don't want to keep my router on after it's not needed. Also I don't wanna keep it vulnerable after it's not needed, even though I have set it up quite securely. ( WPA2 PSK, and MAC filtering)

View 5 Replies View Related

Home Network :: Connection Between Router And Cable Modem Goes Off At Specific Time?

Jul 20, 2011

Lately I've been experiencing connection problems between my router and cable modem. Every night after 11:00 PM EST, my Internet connection sporadically goes out. I called my ISP who said there was nothing wrong on their end. Plugging directly into my modem allows me to access the Internet. When I wake up in the morning, the connection is back until 11 or later again. I ran WireShark but I'm not sure what to be looking for. There are a lot of random things from the LLMNR protocol like standard query A zmtvrjaql.

View 2 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3220 Takes Long Time To Recognize 3G Modem?

Mar 14, 2013

Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : Others
Model : TL-MR3220
Hardware Version : V1
Firmware Version : latest
ISP : Orange

The TL-MR3220 takes a long time to identify the 3g modem and sometimes it will not identify it at all and says "unplugged". Sometimes "unplugged" suddenly apears after the modem has been identified and was working properly.Is this the normal behavior of this device ? Why ? What can be done ? I'm Using Alcatel X500D 3g modem.

View 5 Replies View Related

Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) - Get Internet On More Than One Computer At A Time?

Apr 13, 2012

I have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information

IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :

View 2 Replies View Related

How To Configure To Use Router With Lease Line

Feb 14, 2011

How to configure to use Router with Lease Line ?

1.connect a computer to the wan port-router
2.give the ip in the url-------- 192.168.1.1( by default )
3.enter username and passwrd
4. then in the GUI mode
5. go to the wan setting ...router
6.there put the live ip and the gateway and the dns....aircel detail....
7.go the lan setting and put the lan ip series do nt configure dhcp go manually to all the nodes and put the lan ip u have 4 lan ports
8.out of 4 port ...port 1-- connect the dialler...in lan port
9.and in port 2 connect to (switch) a unmanaged switch frm where u can connect to your lan
10.if in the lan setting u hv given the ip 192.168.1.1
11.then put ur dialler ip 192.168.1.2
12. and local lan machine will tk the ip frm 3 onwards
13.nw if u want to authenticate ur dialer in our voip gateway then give the ip of ur router
15. 192.168.0.1 will be the ip of the lan setting in the router
16. and this will act as a gater to ur local machine gateway

View 1 Replies View Related

Use Modem And Lan At Same Time?

Nov 24, 2011

I have a PC that is connected to LAN network and I have USB 3g Modem when i try to connect them both my pc use only ether LAN or Modem what should i do to make them both work at same time? Running windows 7 64x

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Won't Obtain Lease

Dec 20, 2012

Small company, under 10 computers, wired and wireless printers, straightforward network. Do not need (nor particularly want) Smart Wi-Fi, Cloud Connect, or or anything other than a simple manually-setup router. Have a new EA6500 I plan to use replacing an E1000 that is playing up (needs to be reset every morning) connecting to Verizon east (former GTE) aDSL. Connected the EA6500 to a laptop via ethernet, changed router password to same as E100, set up the two port forwards I'll need (IPs on the internal network are static in the 192.168.1.0/24 block), changed DHCP server to start at 101 (don't ask), leave Internet Connetion Type setting at "Automatic Configuration - DHCP" (same as E1000), shut down both routers and modem (Westell WireSpeed 890-210015-04). Connect EA6500 to modem, power up modem, power up router, and...Nothing. Does not receive external IP via DHCP.If I switch back to the E1000, it immediately picks up the IP lease.

View 6 Replies View Related

Using USB Modem And Ethernet The Same Time?

Aug 1, 2011

My laptop connected to the LAN for internal access, the LAN is limited access ( limited permission for internet connection), so I bought USB Modem. But when i connect to USB modem I lose my internal connection. ( I want to use LAN for internal access and USB Modem for Internet access at the same time)

View 2 Replies View Related

Linksys Wired Router :: BEFSR41 Can't Acquire DHCP Lease

Aug 9, 2012

a couple days ago my BEFSR41 started making trouble, and so far I have not been able to get it working properly again. When I hook up my laptop directly to the cable modem everything works fine, and I get an IP address via DHCP. When I connect through the router, though, the router status shows 0.0.0.0 for all DNS, gateway, etc. addresses, and even pressing DHCP Release/Renew doesn't change that.Also, in the log I see these messages:
 
2012-08-08 20:30:41  warning  DHCP RENEW WARNING - Field invalid in response
2012-08-08 08:30:52  notice  TLV-11 - unrecognized OID
 
Since I can connect to the cable modem directly, it seems the cable modem is not at fault.My overall setup is:
 
- BEFCMU10 cable modem
- BEFSR41 (not sure which version, but I believe it's a 4.x)
- WAP54G
 
Could it be that my provider (Cox Communications) has changed some configuration in their DHCP server, and my laptop (MacBook Pro) can handle it, but the router cannot?

View 1 Replies View Related

Track The Time Or Date When Modem Was Used?

Dec 3, 2012

if there's any way to track the time or date when my modem was used. I have a TP Link modem/router.

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Static IP Lease From DHCP Server?

Jul 8, 2011

I just bought an e4200.  I was using a LinkSys WRT54GS running DD-WRT alternative firmware.
 
One feature that I really liked in DD-WRT was the ability to assign static IP leases from the DHCP server.  I liked having all of my devices running with a predictable, known IP address on my network.  I have a Home Theater PC, and various controller applications that run on iPhones, etc. - some pretty homebrewed.  Configuring the firewalls, etc. was much easier with IP address based controls.
 
Is there a way to achieve the same within the e4200's stock firmware?

View 1 Replies View Related

Modem Reboots Each Time On Switching Between XP And Windows 7

Feb 5, 2012

if I am XP and online, if I restart into Win7, I have to power cycle my modem before I can go online. If I then restart any number of times into Win7, there is no connections problem. If I then restart into XP, then I have to power cycle the modem again. If I then restart any number of times into XP, then there is no problem. If I then restart into Win7, then I have to power cycle the modem.

View 1 Replies View Related

Linksys Wireless Router :: WRT310N V1 DHCP Client Fails To Renew Lease

Apr 28, 2013

I have a Linksys WRT310N v1 with firmware v1.0.10 build 002Jul 19, 2010 My router fails to renew it's DHCP lease from my cable provider, causing internet access to drop. I can still access my cable modem at 192.168.100.1, but I must do a "IP Address Release" then "IP Address Renew" to get back internet access. The router works fine otherwise.

View 6 Replies View Related

Linksys Wireless Router :: Wrt54g2 Wifi Stops Working From Time To Time

Oct 26, 2011

I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.

View 3 Replies View Related

Cisco Firewall :: Reboot ASA 5505 Every Time Modem Reboots?

May 21, 2013

I currently have a problem where I have to constantly reboot my ASA whenever my cable modem reboots. The ISP (Pen Tele Data) is setup so that my ASA has to obtain its' static IP using dhcp (ip address dhcp setroute) on the outside interface. Now, I also have another location with a cable connection (Comcast) that does NOT experience the same problem. However, the difference is this ISP allows me to assign my static IP directly on my outside interface. What can I do so that I don't have to reboot my first ASA everytime modem reboots. 

View 6 Replies View Related

Cisco WAN :: 1941 Router Frozen From Time To Time?

Jun 29, 2011

Ciso 1941 router frozen once a day, sometimes after 2 to 7 days. When the router frozen, no internet connection and cannot login/ping ethernet ports. I can login to console port and copy the error messages below. Reload the router and it will return back to normal operation. Re-installed IOS but still the same.
 
IOS Version 15.1(2)T2,
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)

[code]...

View 5 Replies View Related

Linksys Wireless Adapters :: AE2500 - Needs To Restart Modem Every Time For Connection

Aug 27, 2011

So I just got hooked up to the internet via qwest the other day with my room mate.  We have a wireless modem (PK5000) and he's using the AE2500 usb adapter to get online.  Now, he can get online, but if he ever turns off or sleeps his computer, he can't connect when he turns it back on.  His computer can see the network, full signal, but when he tries to connect it says cannot connect and under troubleshoot options suggests we should move his computer closer to the modem, but its only about 20 feet away and shows full signal.  To get it to work, we need to go into the modem config and reset the wireless options.  No changes are made, just scroll to the bottom and click apply, and presto change he can connect with no problems.He's running windows 7 home edition 64 bit.  The modem's security is WPA/WPA2.

View 1 Replies View Related

Linksys Cable / DSL :: WAG160N Modem Just Dropped Wireless Connection Constantly In Various Time Period

Sep 28, 2012

I've bought a "WAG160N v1.0 Annex A" almost 2 years ago. I never used it's wireless feature untill we moved our house. Now it's like 4 month I'm using its wifi feature and I've got to admit I'm really frustrated by its functionality!
 
For months the modem just dropped wireless connection constantly in various time periods. Somtimes it went like 2 days without any problem but some other times I had to change channel every 15 minutes for it to get back working. And yes it didn't get fix until I changed the channel, otherwise clients had to wait several hours for a 50/50 chance of reconnection. Now It's two days the changing channel trick no longer works. I tried all channels and even put my notebook next to the modem but no luck. The notebook sometimes connnects to the access point but disconnects after a few seconds. Somtimes it doesnt even detect the SSID of my WAG160N modem. Some friends suggested that the wireless hardware of my modem is broken and no longer works but I'm eager to know if it is broken why is it still broadcasting and sending signal.
 
I've tried everything from upgrading and downgrading firmware to turning on and off the modem several times and changes modem position. And even tried the G-only 20MHz mode.We are at a very crowdy place. Using inSSIDer I could pick about 15 other access points. Only few of them are using Wireless-N, most of them are using Wireless-G.This is the inSSIDer diagram of my WAG160N modem from a client: [code]

View 5 Replies View Related

IP Address Lease Denied By DHCP Server?

May 5, 2013

my Laptop is about nine years old, HP Pavillion Pentium 4. I run Windows XP Home Edition Version 2002 SP3. I use a broadband card from Verizon that I just put in my USB (no router, etc) I'm getting a System Error Source DHCP Event ID 1002. When this happens, my computer, I believe, is going into sleep mode and I have to reboot the system. When I turn it back on and go back on the internet, all my websites that I was in are still there. The error says: The IP address lease 10.170.223.48 for the Network Card with Network address 2c3068c16ED1 has been denied by the DHCP Server 10.173.229.86 (The DHCP Server sent a DHCPNACK message)The DHCP Server Service did not extend the lease on your computer's IP address, so your computer temporarily lost its connection with the Network. I tried the ipconfig /release and ipconfig /renew. I tried going in services.msc and going under DHCP and keeping it automatic but stopping it. I called Verizon and I believe he refreshed my Network settings (I think I knew more about the topic than he did) He said it was my computer, whatever. I just tried the static IP but it didn't seem to take. I restarted and it jumped back to automatic. My last guess is it's something to do with the time frame of when it automatically obtains the address and when it expires. When I do the ipconfig /all it shows only a two hour time frame before it expires. Today I noticed that my computer shut down/sleepmode at the exact time the ipaddress was obtained. So, is there a way to increase this time between obtaining and expiring?

View 7 Replies View Related

Internet Using Lease Line Without Server Or Networking?

May 26, 2011

- I just need internet in all 15 PCs - I do not want them to be connected with any sever locally or in network but my demand is internet on all system with good speed.

View 5 Replies View Related

Cisco :: How To Delete Dhcp Lease On WLC 5508

Mar 28, 2011

delete a lease from a DHCP scope on a WLC 5508?  I'm using that unit as the dhcp server, no relay.  I am unable to find anything either through the web or cli. 

View 2 Replies View Related

Linksys Access Point :: WAP610N - Unable To Get An IP Lease?

Mar 22, 2011

I've recently purchased 5 WAP610N access points to replace my older US Robotincs access points.I've configured one WAP610N (upgraded to the latest firmware i found on the site) with a  static IP, bropadcasted SSID & WPA2 personal security.I had no problem at all to connect PC's but when i tried to connect the Ipad & Iphone (with the latest 4.3 firmware) i was able to connect to the network but unable to get an IP lease.  
I had no problem before connecting to the US roboticx access points.When i change (lower) the security to WEP on the WAP610N then everything works fine but i want to use WPA2 in stead of the unsecure WEP protocol.

View 1 Replies View Related

Cisco WAN :: ASA 5505 - DSL PPPoE / DHCP Lease Drops

Jan 25, 2011

I've been having this issue for about 3 months now, off and on, never seemed to be predictable but started happening more and more, which prompted me to look into it.
 
Currently, the DSL Modem is configured in bridge mode with the ASA handling PPPoE. The WAN address is being assigned via DHCP. The ASA is running 8.2(1). The WAN interface will drop it's DHCP lease and will not renew it without power cycling the DSL modem. I did a little bit of googling and found mention of setting "dhcp-client client-id interface outside", specifically this was an issue pre 7.2(22), but doesn't seem to affect my situation. Originally, I had the MTU on the outside interface configured as 1500, changing it to 1492 has not resolved my issue either.
 
I've enabled PPPoE and DHCPC debugging and posted the results below when the event occurs, I'm thinking this is moreso a PPPoE issue than it is a DHCP/DHCP Lease issue as I am not seeing any debug messages from DHCPC.
 
Code...

View 1 Replies View Related

Cisco Wireless :: WAP4410N Does Not Renew DHCP Lease

Jun 23, 2010

I have several Cisco WAP4410N access points.  They are configured to automatically obtain an IP address through DHCP.  This works fine, but I've discovered when the DHCP lease expires, the access point doesn't renew it.  It continues to use the same IP address but does not renew the lease.  If I reboot the access point, it will renew the lease again.Is this a known issue with the WAP4410N?  Is there any way to work around this, other than setting a static IP address or rebooting regularly?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved