D-Link DIR-655 :: Time Entries In Log Details Are Wrong?
Mar 14, 2011The version of my DIR-655 is 1.32NA. Entries in the column of Time for LOG DETAILS are incorrect. How can I correct them?
View 3 Replies
ADVERTISEMENT
Why Need To Reset Router All Time - DNS Wrong
Nov 29, 2011At times when my laptop is running a dianostic it says maybe your DNS is haveing a problem. I don't know what a is DNS
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 1121 Log Report Showing Wrong Time?
Jun 20, 2012I have an ACS Server 5.1 which is used to authenticate my cisco and non-cisco devices. however when I take report on my authentications, the time shown in the report is wrong. However, when I take my mouse pointer to the report , the correct time is highlighted.
View 4 Replies View RelatedLinksys Wireless Router :: E3000 Caller ID's Time And Date Are Always Wrong
Feb 29, 2012I have a E3000 with newest firmware that has a VOIP by Velcom. It's a Grand stream HT–286.My device is working perfectly with the router. Can call and recieve calls. the caller ID (Name and number that appears is accurate). The only problem is the caller ID's time and date are always wrong.When I unplug device, it goes back to Jan 1 and time 12:00am.Any call I then get is wrong.
In the router, I've enabled SIP ALG. And the firewall is only filtering ident (port 113) and Anonymous Internet requests.The device has a hard coded internal IP (192.168.123.110). and I reserve the IP using mac filtering.The device has an administration page that is unavailable to users as it's locked by a password. On this page has an NTP server setting that the device uses to get it's time/date.I see on the information page of the device that iot's registered to a sip server.The company is saying that it's a firewall issue. I'm not too sure how to proceed.
Linksys Cable / DSL :: WAG160Nv2 Slow Wireless Speed And Wrong System Time
Aug 23, 2010I have a WAG160Nv2 with Firmware Version:V2.00.20 Two problems
1. Slow wireless speed - only 2Mbit - with cabte up to the lines max 15Mbit
2. The routers system time is wrong - it says " 03-01-2000 02:19:54" I have set the correct system time but no difference
I have tried a lot of wireless options and some of the timezones but i did not solve the problem
Access Denied Entries In D-Link DIR-628 Log File?
Aug 9, 2011I have enabled Network filtering on MAC address on my D-Link 628 router.
I've noticed entries in the log file - "Access Denied to LAN System with MAC address ______________" for 2 different MAC addresses. I do not recognize these MAC addresses. The entry that immediately follows these messages - "Above message repeated 466 times and 124 times. The entries for these 2 MAC addresses has been occurring multiple times with different repeat numbers over the past few days.
Is this an indication that someone nearby my router is attempting to hack into my wireless router or do I have a configuration issue?
D-Link DIR-615 :: Parental Control - Number Of Entries
Mar 4, 2011For our children, we use the parental control feature of the DIR-615 (RevD, FW4.11b15), which works excellently. I use the whitelist feature, so only trusted web sites can be accessed. Unfortunately the DIR-615 only has 10 entries in that list and I will soon need more. So I wonder if there is another D-Link router that offers a bigger list with maybe 50 or even 100 entries?
View 4 Replies View RelatedD-Link DIR-655 :: Rev A4 - Firmware 1.35NA - Securespot Log Entries?
Jan 22, 2011I have a DIR-655 rev A4 with firmware 1.35NA.I read [URL] 5 which stated that the SECURESPOT feature was removed as of firmware 1.35NA but since upgrading the router to 1.35NA I find the following two log entries mentioning securespot being initiated:
[INFO] Sat Jan 22 21:01:21 2011 Initiating securespot services.
[INFO] Sat Jan 22 21:01:21 2011 Allocating securespot services.
I will mention, before upgrading to 1.35NA I was running the stock 1.21 firmware that shipped with this router. Prior to updating to 1.35NA I had taken a backup of the router settings and after the firmware update was applied I restored this settings backup. Could that be the reason this log entry is showing up? It makes me think securespot is not really removed as is claimed in the release notes for this firmware.Can anyone else with a DIR-655 A4 w/firmware 1.35NA confirm the above two log entries mentioning securespot appear in the log (assuming ALL log settings are turned on) when your router is rebooted?
D-Link DIR-601 :: Log Flooded With UDHCPD Received A SIGUSR1 Entries
Nov 30, 2011I just replaced my older D-Link with a DIR-601. I decided to try the email feature, so I set the option to "On Log Full". Within an hour I had 5 emails. I noticed that they were mostly entries reading "DIR-601 local0.debug udhcpd[18594]: UDHCPD Received a SIGUSR1". The "Debug Information" option isn't checked.
View 1 Replies View RelatedD-Link DIR-825 :: Wireless Signal Drops From Time To Time?
Jan 10, 2012AI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.
View 3 Replies View RelatedD-Link DIR-655 :: Wireless Network Gets Slow Time To Time
Sep 1, 2011i have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
D-Link DIR-655 :: Router Update Wrong Dyndns Address
Mar 23, 2011I have tried to search for an answer on the forum but I cannot find the correct answer to my issue. I'm having a problem where my dir655 updates the wrong ip adress to dyndns server. It always report 255.255.255.255. The dyndns information is all entered correctly and says "connected" in the dyndns configuration. So what is wrong with the adress update from the dir-655 to the dyndns server ? Of course I cannot use my dyndns adress since it is always at the wrong adress.
View 16 Replies View RelatedD-Link DIR-615 :: Router Stopped Functioning Because Of Wrong BIN Or Flashing
Mar 5, 2011what should to do if ever or incase something happen during flashing firmware.like power turn off, or you quit the installation, or wrong .bin file.what i did is upgrade the firmware dlink dir 615 3.03 ww c2 to ddwrt factory.bin but before that i have save the original .bin from 192.168.1.1 for incase restore original setting.i did not follow the instruction that get latest firmware from dlink but what i did is restore or use emergency to reback the 3.03 ww c2 .bin from my dlink that i was save from original setting. and it didnt work out it failed the router totally stopped working and functioning. only the dlink name light is on. even the reset button dont work or dont blink.what should we do for this kind of fault is there another way to return the setting back? no ethernet and wifi so no way of communicating with router. the router ethernet and wifi has stopped working. but the computer homw network is detecting the router whenever i plug it in computer through Ethernet but the local area network when plug to router is disconnected. the router wifi is not blinking either.
View 1 Replies View RelatedD-Link DCS-942L :: Can't Login Because Of Wrong Username / Password
Jan 20, 2013I've get telnet access to my DCS-942L, but i can't log in because of wrong login/password. Neither newly created or changed admin's login/pass nor user's login/pass is not working! Which is default telnet login and password then?
View 4 Replies View RelatedD-Link DIR-655 :: DHCP Assign Wrong IP Address To Client Laptops (2)
Sep 3, 2009DHCP enabled with default settings. Dynamic IP range from 192.168.0.100 - 192.168.0.199.Router shows laptop with 192.168.0.199 however when I check the IP on laptop I have 192.168.100.10 and both laptops are connected on my SSID with 90% signal strenght.
View 4 Replies View RelatedModem And Router (D-Link DIR-601) DHCP Giving Out Wrong Default Gateway
Nov 6, 2012So network was running fine for about a year or so. Network consists of 1 Motorola SB6120 cable modem attached to a D-Link DIR-601 wireless router. All settings were default except for SSID and WPA password. One day I just couldn't access internet anymore. I've narrowed it down to the default gateway that is being given out through DHCP. The default gateway that is being given out is the IP of the modem (192.168.100.1) and not of the Router (192.168.0.1). I can't find any option on Wireless router to be able to force the gateway address when handing out the gateway IP. Theoretically I thought I should be able to put router on same subnet as modem as 192.168.100.2 but that still doesn't work. If I set the IP adresses statically on the PCs and give it the Gateway of the Router everything works fine. I should mention this is for my boss' house and basically I dont want him calling me everytime he has a friend come over and I have to talk em through setting up a Static IP.
And just for an example this is what I get if I use DHCP:
IP Address: 192.168.0.155
Mask: 255.255.255.0
DNS: 192.168.0.1
Default Gateway: 192.168.100.1
And If I want it to work I have to change the default gateway to 192.168.0.1 I've tried updating routers firmware and reset to factory default numerous times. Is it possible for a router DHCP stop working?
How To Find Out Details Of WEP Key
Apr 18, 2012I have a Belkin aigo True Mimo PreN Router model FD 582304. I am trying to wireless connect a new laptop on windows 7. It wont accept the WEP key I have previously used. The router is cable connected to my desk top computer. How do I find out the details of the WEP key for this router or reset all.
View 5 Replies View RelatedHow To Setup (SMTP) Details
Apr 1, 2012I have installed some 3rd party software for email messaging and it requires SMTP details. I hardly even know what SMTP is. Via google I found one it has something to do with server for sending email messages but I don't want to use SMTP of my ISP which is (referring to smtp and not isp) the one that is being used in microsoft outlook program. But the 3rd party software is different one. It requires FIVE (5) datas and I have no idea how do I find them out:
email
server name
password
username
port
I have been searching for some smtp details what to type with the following requirements:
- smtp must be free to have and use details
- working one
- as fast as possible
- no particular limits
The program also offers to set up ''in-build'' smtp server. If I choose this it works but the message cannot be sent for unknown reason. I don't have firewall and I double checked nothing is wrong with avast antivirus. So I will have to get the smtp details with mentoined four requirements. Don't even know where to search. I found some freeware smtp (or virtual smtp) applications but I need 5 datas to type in and not an application. No idea where to get them. I tried gmal [URL] but its not working, been trying also different ports.
Extract Details From Sky Router?
Mar 27, 2011Iam joining sky in the coming week and will be receiving their free router (G Router). I am currently using (Belkin N Router) due to the distance from my computers and interferance (eg , walls, 4 floors).
I understand that I cannot use my own router with sky because they have username & password built into router. I have heard rumours that these details can be extracted.
WHY ON EARTH DO SKY ONLY SUPPLY G ROUTERS
How To Hide My Details Online
Jul 15, 2012I am looking for a way to hide all that information that can be retrieved about me, for example browser, OS, resolution, location, etc.. Is there a way to prevent the sites from getting that info?
View 2 Replies View RelatedGetting Computer Details From Mac / IP Address?
Jul 28, 2012Is it possible to obtain details for computers that are connecting to my wireless network? I can see their mac and ip addresses. I want to get details like computer name, operating system and other details if possible.
View 2 Replies View RelatedHow To Get Isp Login Details Of Other Systems
Dec 15, 2011How do I find out my ISP and ISP password?
View 1 Replies View RelatedVerizon - Cannot Find Contact Details
May 23, 2012how do i telephone / email at & t or verizon to purchase wi-fi service ? i'll go back to their website (s) mess if i can't find a phone # or email address;telephone number ? do you know any for verizon or at&t or email address?
View 1 Replies View RelatedHiding Details Using Remote Desktop
May 12, 2011I know that when you surf the web, websites can log your IP & MAC address.If you get my jist, I don't want my laptop to be flagged on a few web sites I have been on.My plan is to use another pc, that has a wireless braodband dongle from a mobile phone company.The pc will be attched to the wireless router via eithernet, but banned from access the web via the router. This way I can connect remotley from my laptop.
View 5 Replies View RelatedCisco :: DFM LMS4.2.2 - How To Get Error Details
Nov 6, 2012Cant find the speeking result/cause of 4 and 1 in the example below, that are defined as enums in the MIBs normaly. Where can I access the result of "snmptranslate -M<MIB-dirs> -m ALL -Td <ps-status/test-oid>" if this is implemented in LMS overall? What are the OIDs from Cisco's ps-status/test, if the translation of MIB-enums is not implented?
Event_Description
StateNotNormalDevice IP
x.y.z.1Device Type
Switches and HubsFault Last Updated At
06-Nov-2012 16:12:49Component
[code]....
Dell :: Wi-Fi Pin N7110 Lost Details
Jul 11, 2013Wi-Fi pin. I lost my details on the laptop. My laptop is Inspiron N7110.
View 1 Replies View RelatedWebpage Error Details Object Required
Apr 6, 2011webpage error details object required
View 1 Replies View RelatedGet Details Of Any Destination Location Through Google Earth
Mar 31, 2011how to get details of any destination location through google earth?
View 4 Replies View RelatedHow To Hide Computer Details Via Remote Desktop
May 12, 2011I know that when you surf the web, websites can log your IP & MAC address.If you get my jist, I don't want my laptop to be flagged on a few web sites I have been on.My plan is to use another pc, that has a wireless braodband dongle from a mobile phone company.The pc will be attched to the wireless router via Ethernet, but banned from access the web via the router. This way I can connect remotley from my laptop.
View 8 Replies View RelatedD-Link DIR-655 :: Cannot Synchronized Time Using NTP
Jul 21, 2010my router internal time somehow will not working on manual config it will stop after certain period now im trying to use NTP
[code]....
D-Link DIR-655 :: Time Will Not Reset
Mar 4, 2012 I have DIR-655, 1.33NA. Recently, I noticed the clock in the router was off, so I wanted to correct it. Each and every time I go through the steps to reset the clock, using time server or clone computer time, or manual reset, after the save settings and reboot of the router, i find the router still displays the wrong time, and frequently reverts itself to a time on Feb 22, 2012. Same problem for trying to reset the DST settings, turning automatic time from server on and off, changing the time server polled. Additionally, I have forced the router to factory settings and rebuilt all of my configuration no less than 4 times.
So, since I recently had to trade out the cable modem because Cablevision fried it with their 'system upgrade', I'm also wondering if the same shenanigans also damaged the router.
Broadband :: Changing Previous Owners Details And Settings?
Jun 17, 2011bought a second hand laptop but all previous owners details are still in. they must have been on a dial-up network want to change to broadband,how? also need to sort out wifi.
View 1 Replies View RelatedD-Link DIR-655 :: Rev B. 2.00 DDNS And NTP Time Conflict?
Dec 23, 2010Hooked up this router the other day to replace my old Linksys G - which has been bulletproof for 8 years. I am now wondering if I made a mistake with this unit.
I set up DDNS - after much trial and error with dyndns it now works fine.I tried to set up NTP time function - does not work. Then I set time manually. Of course on reboot it looses the time since there is no internal time function. So I need NTP.In the course of troubleshooting I turned off DDNS and behold the NTP time function now works. I turn DDNS back on and NTP does not work.
I see no logical connection between these two functions, yet the seem to interact (or not) somehow.When the NTP is not working, on reboot the time displayed in the router is the last time that I MANUALLY set the time, even though that is grayed out since I have (supposedly) activated NTP.
If I do NOTHING to NTP and uncheck DDNS, after reboot the time is correct.I tried many different NTP servers all with the same result.Looking back on-line, I see the NTP function has been a continual problem with some folks (maybe those using DDNS?) in earlier firmware. Come on DLINK don't you think it's time to get this fixed?
