I have enabled Network filtering on MAC address on my D-Link 628 router.
I've noticed entries in the log file - "Access Denied to LAN System with MAC address ______________" for 2 different MAC addresses. I do not recognize these MAC addresses. The entry that immediately follows these messages - "Above message repeated 466 times and 124 times. The entries for these 2 MAC addresses has been occurring multiple times with different repeat numbers over the past few days.
Is this an indication that someone nearby my router is attempting to hack into my wireless router or do I have a configuration issue?
In my log I have the message: "Access denied to wireless system with MAC address 0020008E971E". When I checked the vendor for this MAC, it shows Lexmark international inc, which fact make me feel something is wrong. My first thought was that somebody trying to break into my net but I am close to accept that the owner of Lexmark WiFi printer without an idea in networking, just tried to connect it to his network and after failing to do that, it's wired and wireless features are still on. But still could this be bug or something? I am posting some logs when I first discovered the problem and after I granted access to the device with the MAC address 0020008E971E. I forgot to tell you, that before I decided to post here I did firmware upgrade from Hardware version A3 1.10 to 1.35NA (I bought it from US) with factory default restore. The result was absolutely the same - the messages kept coming "Access denied to wireless system with MAC address 0020008E971E". So I granted access to that MAC and checked the logs again. There is a line in the log that stated "primary:"
I work in a service desk in +100 company and lately i got a task to gather all the host file entries that are on our network's PC's.We operate on windows XP 32&64bit, W7 64bit. Is there any tool that i could use to scan all host files within our network. I tried google of course but maybe i type my search phrases in a bad way to find something useful to my needs.
I keep getting this error every few days and I have to restart my router in order to gain access back to the web utility. I reflashed the fw a second time with no success. I have read about this trip 30 reset but have had no luck finding a post which describes how to go about that method.
NETWORK CONNECTION PROBLEMPOPUP ERROR states"\<name> is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Access denied."When trying to View the two PCs through My Network Places> View workgroup Computers in MSHOME?I was able to map the shared folder manually.
I have a computer with windows 2003 server installed on it. There is one shared folder. The computer's name is SERVER. The shared folder's name is OFFICE.Whenever I type \SERVEROFFICE in a windows explorer window, I get a pop up window with a message that says that Windows does not find \SERVEROFFICE.I mean, I should be able to see the folder in this way because this OFFICE folder is shared and I am doing this from the same computer and not from another computer in the LAN.
I'm trying to solve a disastrous networking (via workgroup nightmare) and I cannot enable the DNS Client on my Windows 7 PC. I go to cntrl panel, admin services, dns client, and try to change it to automatic and it says "access is denied"
XP desktop hard wired to router. XP and Vista laptops wireless. Vista has SP1 and both XPs are SP3. All computers can see each other. Vista can access the XP drives. The 2 XP computers can access each other. The 2 XP computers cannot access the VISTA. Access is denied. Firewalls are off on all computers. I have tried permissions on both sharing and security tabs with no luck.
For our children, we use the parental control feature of the DIR-615 (RevD, FW4.11b15), which works excellently. I use the whitelist feature, so only trusted web sites can be accessed. Unfortunately the DIR-615 only has 10 entries in that list and I will soon need more. So I wonder if there is another D-Link router that offers a bigger list with maybe 50 or even 100 entries?
I have a DIR-655 rev A4 with firmware 1.35NA.I read [URL] 5 which stated that the SECURESPOT feature was removed as of firmware 1.35NA but since upgrading the router to 1.35NA I find the following two log entries mentioning securespot being initiated:
[INFO] Sat Jan 22 21:01:21 2011 Initiating securespot services. [INFO] Sat Jan 22 21:01:21 2011 Allocating securespot services.
I will mention, before upgrading to 1.35NA I was running the stock 1.21 firmware that shipped with this router. Prior to updating to 1.35NA I had taken a backup of the router settings and after the firmware update was applied I restored this settings backup. Could that be the reason this log entry is showing up? It makes me think securespot is not really removed as is claimed in the release notes for this firmware.Can anyone else with a DIR-655 A4 w/firmware 1.35NA confirm the above two log entries mentioning securespot appear in the log (assuming ALL log settings are turned on) when your router is rebooted?
I just replaced my older D-Link with a DIR-601. I decided to try the email feature, so I set the option to "On Log Full". Within an hour I had 5 emails. I noticed that they were mostly entries reading "DIR-601 local0.debug udhcpd: UDHCPD Received a SIGUSR1". The "Debug Information" option isn't checked.
i m working in a domain environment . for example my domain name is testdomain.com. i create a shared folder on it and give everyone a read control over it. then i create a folder in that shared folder with name of test. i also create a user with name test. i give full control to test user over test folder. now when i access the test folder from network with username test. i can read that folder but when i create the file or folder in the test folder it will show the following error..."unable to create a folder"new folder" access is denied.
your computer could not be joined to the domain because the following error has occured,access denied,this error is happening when i create users for active directory users and computers in windows server 2003,i have 11 computers ,,1 server and 10 clients,,i created 10 users in active directory users and computers ,,until here i have no problem,,but when i want join client computers with server it is happening this error(your computer could not be joined to the domain because the following error has occurred,access denied)i can join 3 client computer with the server in fourth computer it happening that error,what can i do?
Even though I am an Administrator on the server, sometimes I create files or folder on a network drive and when trying to access them later (or immediately in some cases), I am getting an "Access Denied" box.For example, I just created a folder, moved an item into it, then tried to rename the folder and was denied access.
All I want to do is to share a couple of Folders, My Documents and Downloads, between two PC's on a Workgroup network.Networking is not my strongest point but up until now I have managed quite successfully.The setup is :-
1st PC is Mike-Laptoppc is on a Wireless connection to an ADSL+2 router/modem.
2nd PC is a Desktop Alexs-PC connected via cable to the same router/modem
I can share all the shared folders from the Desktop to the Laptop, but I can only share Media streaming on the Desktop from the Laptop, so I know there is a connection between the two computers. I have now turned off Media streaming to concentrate on just folder sharing.Whenever I try to access the Laptop from the Desktop I get an " Access Denied you do not have permission contact your administrator " box on the desktop.
I'm configuring ASA 8.4 for SSLVPN allowing Web Portal access with group-url. I've noticed that if I put certain keywords after slash mark on group-url, client access would be denied by http 404 error.
Here's my configuration:
tunnel-group test type remote-access tunnel-group test general-attributes default-group-policy test
I am working on a Drupal site which is on a virtual server (the way it's been explained to me). I've been told I need to work with it through webdev. So I can copy a file off the server and onto my local machine. I make my edits and then try to upload it to the server. I get locked out with the message: Error 0x80070021: The process cannot access the file because another process has locked a portion of the file. I have tried shutting down my code editor, opening and closing the connection, tried different methods of reaching the server (Cyberduck and through Window's map network feature) to no avail. What can I do?
( Home Cisco router WAG160Nv2, Windows Vista)Who is the network administrator on my home network and which device is involved: Windows Vista, Cisco network magic pro ? ; the Cisco router modem with WLAN ?The wireless MAC filter on the modem is disabled.The access is denied to my WLAN and the only one from which I get signals from the neighborhood. My main laptop has access to the network only over the Ethernet, but not over WLAN.My second laptop has access to this network over the Ethernet and WLAN .
I have a EA6500 with a hard drive connected to the USB port. When I try to copy a file to the drive VIA the network folder on my computer it says "Destination Folder Access Denied, You Need Permision To Perform This Action". I used to be able to copy files to the drive so I am sure it is just a setting on the router or something.
I am trying to troubleshoot a problem where in one of my remote site is not able to access some networks at HQ over Site to SIte VPN ( asa 5505 at Remote and 5520 at HQ). I ran packet tracer and HQ ASA looks clean as everything came out as ALLOW. Remote site ASA packet tracer give me DROP out at Phase 9 (VPN). I am not very sure what to look in ASA for resolution now. Is it an access list that is blocking the traffice or VPN setup.
The last shipment of 3602 APs for a customer came with 7.3 software. Controllers are running 220.127.116.11 so APs had to be downgraded. After APs finished downgrading they were still up. When we moved the APs to another controller running 18.104.22.168 they would not come back up. Power was denied at the switch.
I just bought a WMP600N adaptor and although windows 7 recognizes it I would like to install the official drivers from Linksys. When I try to update the drivers that I downloaded from the linksys website I het an access denied error. I am logged in as the administrator. I have already tried uninstalling the default drivers, but still I get the access denied error. I even tried the windows safe mode and still got the access denied error.
With the default windows 7 drivers the connection is quite poor. how I can install the official windows 7 drivers?
I have Dell Inspiron 15 3520 laptop bought in December 2012 with Windows 8 Pro. It was working fine until two days ago. I am unable to obtain DHCP lease either through wireless or wired network. After troubleshooting, I found DHCP service is not running and try to restart but of no avail.I ran sfc /scannow and the results are OK.
I am looking to the best way to add a link to our File server on our network. We have a win 2008 r2 server set up to share a directory for network storage. The storage server has a static IP and the way we access it now it so go to RUN and input "//servername" and it pops up the directory in Win Explorer. This has worked fine but now we are building an Intranet and I need a way to link the Data Storage on the Intranet site.
I have prolem with Dir615 I doesn't know how to configure it to use for file sharing outside Lan. The problem with Dir615 I'm sure because when I swicth Dir615 to Dir100 it's works perfectly. Is there any magic box where should I mark tick?
I am replacing an A3 that's slowing dying with a B1. I understand the Firmware versions are different but I was curious if I can save the config file from the A3 and load it into the B1 ? I don't know if the config file includes the Firmware....