Servers :: Unable To Create Folder Access Is Denied
Jan 4, 2012
i m working in a domain environment . for example my domain name is testdomain.com. i create a shared folder on it and give everyone a read control over it. then i create a folder in that shared folder with name of test. i also create a user with name test. i give full control to test user over test folder. now when i access the test folder from network with username test. i can read that folder but when i create the file or folder in the test folder it will show the following error..."unable to create a folder"new folder" access is denied.
View 1 Replies
ADVERTISEMENT
Jan 3, 2011
I have a computer with windows 2003 server installed on it. There is one shared folder. The computer's name is SERVER. The shared folder's name is OFFICE.Whenever I type \SERVEROFFICE in a windows explorer window, I get a pop up window with a message that says that Windows does not find \SERVEROFFICE.I mean, I should be able to see the folder in this way because this OFFICE folder is shared and I am doing this from the same computer and not from another computer in the LAN.
View 3 Replies
View Related
May 14, 2012
Network access denied for a particular folder
View 1 Replies
View Related
May 7, 2013
I have a EA6500 with a hard drive connected to the USB port. When I try to copy a file to the drive VIA the network folder on my computer it says "Destination Folder Access Denied, You Need Permision To Perform This Action". I used to be able to copy files to the drive so I am sure it is just a setting on the router or something.
View 5 Replies
View Related
Oct 16, 2012
shared folders showing access denied message in server 2003
View 2 Replies
View Related
Apr 2, 2012
your computer could not be joined to the domain because the following error has occured,access denied,this error is happening when i create users for active directory users and computers in windows server 2003,i have 11 computers ,,1 server and 10 clients,,i created 10 users in active directory users and computers ,,until here i have no problem,,but when i want join client computers with server it is happening this error(your computer could not be joined to the domain because the following error has occurred,access denied)i can join 3 client computer with the server in fourth computer it happening that error,what can i do?
View 9 Replies
View Related
Mar 23, 2013
Staff a has done excel spread sheet and safe under main folder at NT drive now sftaff b will access the staff a folder main and make changes how to stop this mess
View 1 Replies
View Related
Mar 30, 2011
I have shared a folder on my server with sharing & NTFS permissions. I am the administrator and have more than the required permissions.
Yet when i try and access the folder from My Computer, it tells me that it is not accessible and that access is denied.Ive done the same for every other user who should have access, with no problems.
Ive also looked at parent permissions and inheriting and have found no reason for this.
View 6 Replies
View Related
Jul 21, 2011
I'm having Local Area Network(LAN) with 10-15 client computers connected to three servers. And I've folder containing files in one of the servers which I can access and proceed my daily downloading and uploading activity.Due to Virus I've formatted some of the client computers and re-installed everything. Now the problem is I can get Ping Command request successfully but can't access that folder from the clients instead it's been asking for username and password. Also, that username and password is not working even if used it.
View 8 Replies
View Related
Jun 4, 2013
On C6500 series I have to create a separate community to send a SNMP trafic for a couple of gig interfaces.The user that will collect these informations has a Monitoring server and is only interested in monitoring traffic on those link and maybe pps.
I understood to create a an ACL pointing to his IP of the server, and that create a community and associate this access list with that community. Those commands I have, but I need to send the user the MIBs or other relevant info on how to collect and forbid everything else but thos interfaces.Do I need to give the SNMP HOST command and associate with this community after that.
View 1 Replies
View Related
Apr 16, 2011
i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies
View Related
Oct 1, 2011
how will I set a password in a folder in my shared drive? and I want to set a permission to the specific person who can read and write my files. I am using Windows 7 Starter.
View 3 Replies
View Related
May 15, 2011
I've connected a 1.5TB external USB HDD to my WAG320N. The HDD has been formatted and can be viewed via LAN.Problem is that whenever I try and create a new folder in the utility via MSIE I get an error message "Failed to Create a new folder'
View 2 Replies
View Related
Dec 5, 2011
I have a Western Digital "WD 6400AAC External MYBook that I can not create shares on, nor edit the public folder. In each case, I receive the message "Error on page". I've updated my firmware, several time, to the latest build. I've formatted the my WD drive using the router and my computer, and each time I try to create a share, "Error on page" shows on the bottom left corner of the page and nothing happens. I tried several other drives and the results are the same.
View 1 Replies
View Related
Dec 9, 2012
I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies
View Related
Oct 7, 2012
I have a media server, running Windows Server 2003, it is also acting as my Domain controller, DNS and DHCP Server, I have a website hosted at UKHost4u.com, and I can also access my media server using the name url, I have pointed this subdomain to my external IP address of my router, in the Cpanel of my hosting acount now my problem is that I can not access my main website from my house, it just sends me to the login screen of my Media Server, it is something to do with the DHCP Server running on my server, as I turned it off and turned the one on my router back on and it cleared the problem.
View 3 Replies
View Related
May 12, 2011
i have configured SSL VPN on Cisco ASA5510 which is working fine .My Users connected the VPN and access the servers remotely. But now i face one challange my users use PPTP VPN of the customer now a days configured at the Customer Network. When they Connect the PPTP VPN unable to Access the servers remotely defined on the SSL VPN Route.
View 1 Replies
View Related
Feb 17, 2013
I've been having a strange intermitent problem with my E1500 wireless router. When we first bought and installed it everything was working well with no known problems. After several months no one using the router was able to access certain websites as well as a game server that we play on. No one had made any changes to the router settings and I assumed at first that it was an ISP problem. After talking with our ISP tech support they finally suggested plugging my PC directly into the modem rather then the router. I did and found that the websites and servers that previously wouldn't connect while using the router were now reachable. Any changes to the router settings since installation.I decided that just in case someone unauthorized had made changes to simply revert the router to factory settings and reinstall the software. After doing this I found that I could again reach the websites and servers that I previously could not. So time went on with no problems until a few months later when the same websites and servers were again unreachable by anyone on our router. I again reset the router to factory settings and changed passwords as a precaution, but this time the websites and servers were unreachable even though I had just reset the router.
View 7 Replies
View Related
Nov 28, 2011
I have a issue that i am at a loss as how to solve it. I have an ASA 5505 as my firewall. I have users from other companies who visit from time to time and are unable to use their outlook email to send messages. They can however receive messages without a problem. I also have a situation where users who use windows live to access gmail are unable to send messages.
I have narrowed it down to the fact that these uses are using ssl/tls to send the mails. I did some research and found out about the inspect esmtp setting in the ASA. I have disabled it and i still have to problem. I have also removed all outbound deny statements and still no luck.
Of note is that i can send emails without attachments. They take a long time to go out ( from minutes to hours) but eventually they do. Emails with attachments of even 10k do not go at all.
I was running image 8.2.3 and i downgraded to 8.0.5...still did not work...i upgraded to 8.4.3...still did not work. I am now back at 8.2.3.
My Firewall config is attached. I am at my wits end as to what else to try. The company has not renewed support for the device so i am on my own here!
View 2 Replies
View Related
Mar 20, 2012
I Have exented vlan 120,121 from DC-1 to DC-2,the DC-1 and DC-2 are connected using L2 Trunk over fiber terminated on Cisco 6513 on both site ,the distance around 40 Km ,on the DC-2 i just assigned server-1 TO VLAN 120 while server-2 in vlan 121 ,but these servers unable to communicate neither with DC-1 Servers or betwen them locally on DC-2 ,pls note that the servers at dc-2 rely on DC-1 for routing.
View 7 Replies
View Related
May 11, 2011
i have 4 pc's. how can i create DOMAIN in windows7?
View 2 Replies
View Related
Jun 21, 2012
How comes when i try to open a shared folder on a specific computer it looks like a folder yellow and also it wont allow to open.
View 3 Replies
View Related
Mar 18, 2011
how to make a proxy server in o.s server 2003
View 1 Replies
View Related
Mar 10, 2011
I am taking a college course using Microsoft Windows Server 2008 Administrator Lab Manual. The labs assume that you are in a MS lab with the ability to connect to thier domain and servers. I want to create my own virtual lab to simulate MS environment so I can follow the assignments. I have VirtualBox installed. I am a completely new to servers and networking
View 2 Replies
View Related
Sep 16, 2011
i have a problem in the my local network.i have 5 computer.i share a Folder on computer 1. i see this folder on another computer but when i want to open this folder on computer 2 ,computer 3,computer 4 and computer 5 show the connect to computer 1 dialogbox and it say must insert username and password.
View 10 Replies
View Related
Apr 2, 2011
NETWORK CONNECTION PROBLEMPOPUP ERROR states"\<name> is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Access denied."When trying to View the two PCs through My Network Places> View workgroup Computers in MSHOME?I was able to map the shared folder manually.
View 1 Replies
View Related
May 28, 2012
I'm trying to solve a disastrous networking (via workgroup nightmare) and I cannot enable the DNS Client on my Windows 7 PC. I go to cntrl panel, admin services, dns client, and try to change it to automatic and it says "access is denied"
View 1 Replies
View Related
Feb 20, 2011
XP desktop hard wired to router. XP and Vista laptops wireless. Vista has SP1 and both XPs are SP3. All computers can see each other. Vista can access the XP drives. The 2 XP computers can access each other. The 2 XP computers cannot access the VISTA. Access is denied. Firewalls are off on all computers. I have tried permissions on both sharing and security tabs with no luck.
View 14 Replies
View Related
Mar 13, 2011
i tried all the possibilities... still i'm getting the same error.
View 3 Replies
View Related
Aug 9, 2011
I have enabled Network filtering on MAC address on my D-Link 628 router.
I've noticed entries in the log file - "Access Denied to LAN System with MAC address ______________" for 2 different MAC addresses. I do not recognize these MAC addresses. The entry that immediately follows these messages - "Above message repeated 466 times and 124 times. The entries for these 2 MAC addresses has been occurring multiple times with different repeat numbers over the past few days.
Is this an indication that someone nearby my router is attempting to hack into my wireless router or do I have a configuration issue?
View 2 Replies
View Related
Dec 11, 2011
I configured my ACS 5.1 correctly, but I get an "Access is denied to NCS" at the web login page. In the ACS i see a successful authentication.
View 14 Replies
View Related
Dec 13, 2011
Have just had a stab at using my Netgear DGND3700's USB drive sharing - I had a spare external HDD + I want to be able to access files on it both over the 'net and from local network. Both work fine, very easy to set up, however I am unable to edit settings for the shared folder, which means I am unable to password protect it.
I don't need a password for local sharing but obviously it isn't ideal to have files freely available on the Internet, have looked into troubleshooting but can't find any similar stories with Netgears.I click "edit" or "create network folder" and it loads for a second or two but just stays on the same page. There is only one option to select but I have tried clicking the radio button first anyway, then clicking edit, same result.
View 1 Replies
View Related
Mar 11, 2013
I have a user that is trying to save an excel speadsheet that is located in a shared folder on a server, the user can open the file and edit ok but when they try to save the file the progress bar pops up but just hangs then a message pops up to saying "file not saved". They are using Windows 7.The user is new and I have just set up their account so thought it might be permission issues but I have logged the user in on two other different machines (1 win7 and 1 WinXP) and they have no problem at all.
View 7 Replies
View Related
