Servers :: How To Create Domain In Windows 7
May 11, 2011i have 4 pc's. how can i create DOMAIN in windows7?
View 2 Replies
ADVERTISEMENT
Servers :: How To Create Virtual Network With Domain
Mar 10, 2011I am taking a college course using Microsoft Windows Server 2008 Administrator Lab Manual. The labs assume that you are in a MS lab with the ability to connect to thier domain and servers. I want to create my own virtual lab to simulate MS environment so I can follow the assignments. I have VirtualBox installed. I am a completely new to servers and networking
View 2 Replies View RelatedServers :: Windows 2008 Domain Splintered Into 2 Networks
Aug 2, 2012I have a network domain with 2 domain controllers running windows server 2008. At some point the DNS name for one of the servers got messed up and they stopped talking to each other even though they are on fixed IPs. The DNS problem has been fixed, but they haven't started communicating again. While the DNS was messed up the domain controllers kept running a different copy of the network. The DFS stopped replicating, the users lists fragmented and the network separated into two "shadow domains" with the same name. DC1 says it is healthy, but it claims DC2 is offline. DC2 claims it is healthy but DC1 is offline. I don't even know where to begin repairing this rift.
View 1 Replies View RelatedServers :: How To Create A Proxy Server In Windows 7
Mar 18, 2011how to make a proxy server in o.s server 2003
View 1 Replies View RelatedServers :: Connect 5 Servers Together To Create A Private Network?
Apr 16, 2011i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies View RelatedHow To Create A Domain Host Controller For Xp
Apr 11, 2012o create a domain host
View 2 Replies View RelatedServers :: Two Website Domain On One DNS?
Mar 7, 2011Can we maintain two website domain on single DNS Server? its possible?
View 1 Replies View RelatedServers :: Delay In Logging To Domain?
Jul 16, 2011I have one problem with our windows 2008 server when any user want to log in the domain from his computer, it takes long time. it takes around 5 minutes. I have installed DNS on the same AD Domain. Is that OK ?Secondly i have around 70 users and 4 ISPs.. Each ISP is used for specific data transfer. Each of the ISP is connected via ADSL Router to our switch?
View 3 Replies View RelatedServers :: How To Add 10 PC's To Server 2003 Domain
Mar 16, 2011how can i add 10 pc's to server 2003 domain
View 1 Replies View RelatedServers :: Add A PC With Existing Domain Network?
Feb 25, 2011We have purchased a new PC(OS, Windows XP2002, SP2). Now i want to add it with existing Local Area Network which is domain networking. Now how can i add the computer in that network? we use Oracle data base on it. i want to know that how this will work just like other clients on network. i know the LAN without domain network. i add it with network. it is now appear the workgroup. but when i access any client on network, then it cann't do any action, and replies access denied and not access any client c$ drive.
View 2 Replies View RelatedCisco Security :: Why Does ACS 5.1 Domain Account Must Have Permission To Create / Delete Objects
Mar 23, 2011Any detailed knowledge about Cisco ACS 5.1 and Windows AD interaction? I wonder why does Cisco ACS domain account must have permission to create/delete domain objects. This fact does really surprided me, because to my mind Cisco ACS only reads domain structure, and does not make any changes.
View 3 Replies View RelatedServers :: How To Uninstall Exchange Server2003 From Domain
Jun 1, 2011How to uninstall exchange server 2003 from domain controller?
View 1 Replies View RelatedServers :: Domain Name Only Shows Router Interface?
Jul 9, 2011How to host my website from home? So I am half way through this process. I have created a domain name [URL] I have used zoneedit's free DNS server as I cant be bothered setting one up for what I want to do. Now I have my external ip "eg.eg.eg.eg" which i entered into the configuration on zoneedit. I then typed www.mydomainname.net.au into google chrome and I am prompted for my Thompson gateway (my modem/Router) username and password. This I enter and i find my self being able to configure the settings for my router over the internet from my domain name....this makes me go huh? I also tryed using the free dyndns.org with exactly the same results. I have no idea what I am supposed to do next anyway. Btw the website I am trying to host is a Joomla 1.6.3 so I would need to run a WAMP Server as well, but if I have troubles with that I can ask the Joomla Forums.So my main question is what on earth do I do now. Perhaps I need to do something with the ports or settings in my router, and where do I even put the files for the wesite and I do not mean to insult anyone I just don't want to be plainly stating my external ip on the web (i know it is visible on any website i go to) whilst it is linked to my router settings.
View 1 Replies View RelatedServers :: Add Machines To New Test Network Domain
Jan 17, 2012how do I set up a test domain? I'm running Server 2008 std and have not gotten the DNS server configured right. I'm looking for a guide to take me through the process so I can experience success and get the feel of a working LAN.
View 2 Replies View RelatedServers :: Users Disconnected From Domain Alternatively
Jan 24, 2011In my domain users disconnected alternate days the only solution is to rejoin the domain.
View 1 Replies View RelatedServers :: Can Use Apache Server To Setup A Domain Name For Intranet
Aug 7, 2012Differences between using an Apache server on a regular laptop vs. a whole operating system like Windows Server 2008. I'd like to setup an intranet complete with an internal domain name. Is this possible with Apache or do you have to use a complete server operating system like Windows server 2008?
View 1 Replies View RelatedServers :: Redirect Multiple Domain Names To Same IP / Different Port?
Aug 19, 2012Redirecting a Domain to a IP:Port I host game servers for friends and strangers alike, but i'd like to make it easier for them all and give them dedicated IPs. Right now I include domain redirecting, but to connect to their server, they have to put in "example.com:xxxxx", x meaning their servers dedicated port. Is there any way that I can redirect a domain directly to "IP:Port"?
View 3 Replies View RelatedServers :: Your Computer Could Not Be Joined To The Domain - Access Denied
Apr 2, 2012your computer could not be joined to the domain because the following error has occured,access denied,this error is happening when i create users for active directory users and computers in windows server 2003,i have 11 computers ,,1 server and 10 clients,,i created 10 users in active directory users and computers ,,until here i have no problem,,but when i want join client computers with server it is happening this error(your computer could not be joined to the domain because the following error has occurred,access denied)i can join 3 client computer with the server in fourth computer it happening that error,what can i do?
View 9 Replies View RelatedServers :: Unable To Create Folder Access Is Denied
Jan 4, 2012i m working in a domain environment . for example my domain name is testdomain.com. i create a shared folder on it and give everyone a read control over it. then i create a folder in that shared folder with name of test. i also create a user with name test. i give full control to test user over test folder. now when i access the test folder from network with username test. i can read that folder but when i create the file or folder in the test folder it will show the following error..."unable to create a folder"new folder" access is denied.
View 1 Replies View RelatedD-Link DIR-655 :: Create Firewall Rule To Block All DNS Requests Except To Specific Servers
Mar 3, 2011Using a DIR-655, does anybody know how to create a firewall rule to block all dns requests except to specific servers?
View 2 Replies View RelatedCisco Switching/Routing :: Create A Port Channel Between HP Servers (4 Nic) And Two Nexus 2k?
May 9, 2012I am trying to create a port channel between HP servers (4 nic) and two nexus 2k. The server side its a single team with 803.2ad fault taulerence and on the nexus side it have created two port channel (port channel 1 for nexus 2k1 and port channel 2 for nexus 2k2) and made them ACTIVE (channel group mode active)
But when i add a another server on different ports and port channel them the same way as the above server on nexus 2k1 and nexus 2k2, the first server stops pinging. so i have to sht down the first port channel and reopen them - then it works, however it says NO NETWORK ACCESS on the servers (running windows 2008). the only way is to reboot the server i cant be doing this on a production network.
Cisco :: C6500 - Create SNMP For Couple Of Servers / Access List For Separate Community
Jun 4, 2013On C6500 series I have to create a separate community to send a SNMP trafic for a couple of gig interfaces.The user that will collect these informations has a Monitoring server and is only interested in monitoring traffic on those link and maybe pps.
I understood to create a an ACL pointing to his IP of the server, and that create a community and associate this access list with that community. Those commands I have, but I need to send the user the MIBs or other relevant info on how to collect and forbid everything else but thos interfaces.Do I need to give the SNMP HOST command and associate with this community after that.
Connect Windows XP Machines Together Without Domain
Oct 26, 2011I have 3 machines running windows XP, they all belong to my company's domain. These machines have to leave our office but still have to be able to connect to each other and share a few folders on each. I used to do this all the time. I would make sure to turn on the "Server" service, set the windows firewall to allow File and Printer sharing, set the File and Printer sharing setting in the Local Area Connection properties, and set the proper sharing/security of the specific folder. Then as long as each machine used a specific local logon name that was the same on each machine, they would all connect to the shares and work perfectly.However now, I seem to not be able to get any of this to work on machines that have service pack 3. Is there something in sp3 that breaks this?Isn't there a way to still share files on these sp3 machines even though I'm not on the domain? (without changing the domain membership)
View 9 Replies View RelatedActivity Monitor On Windows Domain?
Aug 2, 2012My office uses a Windows domain network. Is it possible for them to track which IP/Port I'm using through some network software. Sometimes I do SSH access to my server. Can they get notified any how about this ? We use Windows XP SP2.
View 3 Replies View RelatedReset Password On Windows XP Domain PC?
Mar 27, 2012I have forgotten my password for windows xp with domain created in windows 2003 server.How to recover my password.I still have same server accessable to me where domain is created.
1. How to recover my windows xp password with domain there is no access to administrator in the client system(XP) ?
2. How to create another id in my server (Windows 2003) and create a new client in windows XP ?
3. How to recover windows xp password through any other means?
*Moderator Edit* - Removed email address for your security.
Windows Xp Internet Lost When Domain Joined?
Feb 10, 2012I have a domain network , when i log on domain the internet is lost , and still did work until i to return this pc to workgroup without change any ip configuration , i try to resolve this and i found that when I rejoined to domain , it's work but not for long time only work until the pc rebooting ?
View 1 Replies View RelatedReplace Adc Server In Windows 2003 Domain?
Jun 22, 2012Need to rebuild the server in different hardware.Replace adc server in windows 2003 domain
View 1 Replies View RelatedWindows 7 Ultimate Cannot Join SBS 2008 Domain
Jan 18, 2013I have set up a Small business server environment for a client. One server in the network, it provides both DHCP, and DNS. Joined all of the XP machine to domain no worries. Tried to join the 7 machine and I get a "DNS couldn't be resolved" error. I know DNS is functioning properly on my server.
View 1 Replies View RelatedCannot Join Domain With Windows 7 Home Premium
Jun 30, 2012Cannot join Domain with Windows 7 home premium.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.2 New Windows Domain 2008
Mar 1, 2011I have installed the Cisco ACS 4.2 in a server running Windows 2003 Server, and this server is member server of the domain. The ACS is working whit a Wireless Platform 4400, and authenticating to the Wireless Users using PEAP and Digital Certificate. But now, the windows platform will be upgraded to Windows 2008. My doubt are the following:
1. The ACS running in a windows 2003 server, will authentificate users in the new windows 2008 domain?
2. At the beginning, the ACS and the Windows domain was 2003. Now whit the change of the version of windows domain, What happens whit the configuration of the acs server as member server? I need reconfigure the member server configuration in the ACS Server?
Windows Vista - Domain Name Server Configuration Error
Jul 21, 2011I can't seem to get the browser to properly show spacing.So I was browsing the internet normally, then all of the sudden, I'm disconnected. When I reconnected, I was able to access the network, but unable to connect to the internet. After attempting to diagnose the issue, I got the "There may be a problem with your Domain Name Server Configuration."can't connect to well known host microsoft.com.
View 9 Replies View RelatedWindows Server 2008 - Unable To Add Computer In Domain?
Apr 23, 2011I have configured a my desktop as a domain controller with server 2008..with dns service running on it. When i tried adding another desktop to this domain, i get the following error message
"Troubleshooting network identification Error: This computer successfully resolved the Domain Name System (DNS) service (SRV) resource record required to locate a domain controller, but it failed to locate a domain controller for the Active Directory domain displayed in the error message.
Cause: The required A (address) resource records that map the name of the domain controller to its IP address do not exist in DNS.
Solution: Verify that the required A resource records do not exist in DNS by using the Nslookup command-line tool.
See also: To verify that A resource records exist in DNS. Cause: The domain controller advertised in DNS may not be connected to the network or is connected to the network but is not running.
Solution: Verify connectivity and then verify that the domain controller is running.
See also: To test a TCP/IP configuration by using the ping command; DNS requirements for joining an Active Directory domain."
Connect A Windows 7 Domain Computer To A Home Workgroup?
Feb 5, 2013I am using a (Windows 7 OS) machine from work (that has a domain name set) at home and want to connect it to my home's workgroup so that I can access files on two other computers currently in the workgroup: one running windows 7 the other xp.
View 1 Replies View Related