Differences between using an Apache server on a regular laptop vs. a whole operating system like Windows Server 2008. I'd like to setup an intranet complete with an internal domain name. Is this possible with Apache or do you have to use a complete server operating system like Windows server 2008?
View 1 RepliesI am attempting to setup an Apache Server 2.2 for Windows, everything is set up but the server will not start, I heard it may be caused by my virus protector using Port 80 but I cannot find the httpd.conf file for it in the directories they say it should be in, I even did a tree/f with CMD DOS?
View 5 Replies View Relatedhow can i add 10 pc's to server 2003 domain
View 1 Replies View Relatedi've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
i've created an application with NodeJS and I'd like to test the application on my LAN with my family. The application listens on port 1337 for connections and I can access the application fine through my own PC by typing localhost:1337, 192.168.0.3:1337 or even http://joel-pc:1337/ into my browser's address bar.
I will be also be running apache alongside NodeJS, and I can access this fine by typing 192.168.0.3 or http://joel-pc/ into a browser's address bar as long as it's connected to the same network.Now here's the weird part; If I stop the apache service, change my node application to listen on port 80 (http) insted of 1337, it will be accessible on my pc by typing localhost, 192.168.0.3 or even http://joel-pc into my browser's address bar. However, I still can't access NodeJS on any other PC on my network apart from my own.
I've tried creating an outbound rule within Windows 7 to allow access to port 1337, but I still can't get access to my NodeJS server on any other PC than my own, even if it's listening on port 80.
I'm running a windows lan that connects 3 computers and a shared storage external hard drive. The whole network, including the external hard drive is connected by ethernet back to my adsl modem/router. I want to convert the external hard drive into an ftp server to enable secure file sharing on the internet by allowing remote access (for the purpose of downloading files) to anyone that I offer a username and password to.The external hard drive is a Western Digital World Edition (blue light)I believe it's a 2008 model.The adsl modem/router is a Billion Bipac 7300(G) RA.Is this doable?
View 3 Replies View Relatedi'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies View RelatedI want to config a cisco 881 route to let a host jump to intranet web server when this host want to internet web server visit. All other server (email...) do not change.
View 1 Replies View RelatedI have made a site on the internet and an intranet site made in share point server 2003. How can i connect link my internet site to my intranet site.
View 1 Replies View RelatedCan we maintain two website domain on single DNS Server? its possible?
View 1 Replies View RelatedI have one problem with our windows 2008 server when any user want to log in the domain from his computer, it takes long time. it takes around 5 minutes. I have installed DNS on the same AD Domain. Is that OK ?Secondly i have around 70 users and 4 ISPs.. Each ISP is used for specific data transfer. Each of the ISP is connected via ADSL Router to our switch?
View 3 Replies View Relatedi have 4 pc's. how can i create DOMAIN in windows7?
View 2 Replies View RelatedWe have purchased a new PC(OS, Windows XP2002, SP2). Now i want to add it with existing Local Area Network which is domain networking. Now how can i add the computer in that network? we use Oracle data base on it. i want to know that how this will work just like other clients on network. i know the LAN without domain network. i add it with network. it is now appear the workgroup. but when i access any client on network, then it cann't do any action, and replies access denied and not access any client c$ drive.
View 2 Replies View RelatedHow to uninstall exchange server 2003 from domain controller?
View 1 Replies View RelatedHow to host my website from home? So I am half way through this process. I have created a domain name [URL] I have used zoneedit's free DNS server as I cant be bothered setting one up for what I want to do. Now I have my external ip "eg.eg.eg.eg" which i entered into the configuration on zoneedit. I then typed www.mydomainname.net.au into google chrome and I am prompted for my Thompson gateway (my modem/Router) username and password. This I enter and i find my self being able to configure the settings for my router over the internet from my domain name....this makes me go huh? I also tryed using the free dyndns.org with exactly the same results. I have no idea what I am supposed to do next anyway. Btw the website I am trying to host is a Joomla 1.6.3 so I would need to run a WAMP Server as well, but if I have troubles with that I can ask the Joomla Forums.So my main question is what on earth do I do now. Perhaps I need to do something with the ports or settings in my router, and where do I even put the files for the wesite and I do not mean to insult anyone I just don't want to be plainly stating my external ip on the web (i know it is visible on any website i go to) whilst it is linked to my router settings.
View 1 Replies View Relatedhow do I set up a test domain? I'm running Server 2008 std and have not gotten the DNS server configured right. I'm looking for a guide to take me through the process so I can experience success and get the feel of a working LAN.
View 2 Replies View RelatedI am taking a college course using Microsoft Windows Server 2008 Administrator Lab Manual. The labs assume that you are in a MS lab with the ability to connect to thier domain and servers. I want to create my own virtual lab to simulate MS environment so I can follow the assignments. I have VirtualBox installed. I am a completely new to servers and networking
View 2 Replies View RelatedIn my domain users disconnected alternate days the only solution is to rejoin the domain.
View 1 Replies View RelatedI am trying to setup internet access and intranet access using two cards per PC. I don't have sever software and I want to be able to share files between several machines. I have two routers. One that connects to cable modem and one that connects to intranet side. I have assigned different static ip addresses to both cards.
View 6 Replies View RelatedRedirecting a Domain to a IP:Port I host game servers for friends and strangers alike, but i'd like to make it easier for them all and give them dedicated IPs. Right now I include domain redirecting, but to connect to their server, they have to put in "example.com:xxxxx", x meaning their servers dedicated port. Is there any way that I can redirect a domain directly to "IP:Port"?
View 3 Replies View Relatedyour computer could not be joined to the domain because the following error has occured,access denied,this error is happening when i create users for active directory users and computers in windows server 2003,i have 11 computers ,,1 server and 10 clients,,i created 10 users in active directory users and computers ,,until here i have no problem,,but when i want join client computers with server it is happening this error(your computer could not be joined to the domain because the following error has occurred,access denied)i can join 3 client computer with the server in fourth computer it happening that error,what can i do?
View 9 Replies View RelatedI have a network domain with 2 domain controllers running windows server 2008. At some point the DNS name for one of the servers got messed up and they stopped talking to each other even though they are on fixed IPs. The DNS problem has been fixed, but they haven't started communicating again. While the DNS was messed up the domain controllers kept running a different copy of the network. The DFS stopped replicating, the users lists fragmented and the network separated into two "shadow domains" with the same name. DC1 says it is healthy, but it claims DC2 is offline. DC2 claims it is healthy but DC1 is offline. I don't even know where to begin repairing this rift.
View 1 Replies View RelatedI have only one PC. I use cross cable for setup Domain controller. Than network icon show available network but it is just only send and can't received.
View 1 Replies View RelatedThe network seems to be working alright but we did have trouble with the internet on client machines being slow and timing out all the time.After a lot of trouble shooting I ended up changing the forwarders to OpenDNS instead of the ISP DNS and everything thing seems to be working now.
View 6 Replies View RelatedWe are currently running Windows 2003 Domain in our network with DHCP turned on the Server. We have turned off the DHCP on the Router. We are using RV042 as out Gateway to the internet and everything is working fine. We would like to allow a couple of our users to be able to VPN into the network so that they can use Outlook and be able to access their files on the Shared Folder. The users would be using their laptops from their homes to connect via VPN using the standard Windows 7 VPN connection.
In the RV042 Interface there are many options and I am not sure I understand which setting would allow them to connect successfully to the network, be authenicated as a domain user.
how do I pass from domain server , my network in our compant have ISA server and they close some website like face book , how can I pass over ISA server and use my websites?
View 3 Replies View RelatedI do not have wireless internet access and I get the message "There may be a problem with your Domain Name Server (DNS) configuration" when I try to diagnose the problem.I am on the internet by bypassing the router and having a wired connection from the modem to the computer right now. The problem started when I tried to get a second computer to work with the wireless connection (so with the computer I'm on right now, wireless worked a few days ago). [code]
View 9 Replies View RelatedI am wanting to setup a small network at home. I am using Server 2008r2 64 bit running on VMWorkstation, which is the only way I can run a 64bit OS. I have it installed and running on VM with active directory and a domain created. My problem is trying to join the domain with my other PC's. They cannot find the domain name. The network connection on the VM is set to NAT.
View 2 Replies View RelatedHow has file server been affected by promoting your server to a domain controller? and what are file sever actually do?
View 3 Replies View RelatedI have a 891 router setup as the local DNS server and external lookups from connected devices (and the router cli) work fine. I'm having problems getting internal host lookups working though.
this is relevent part of the config, router ip address is 192.168.100.9:
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.100.1
[Code]....
If I put rearswitch. (i.e. add a single full stop at the end of the hostname) it resolves fine. The same behaviour happens with other hosts defined with the ip host command. Is it possible to use local hostnames without a domain name or full stop?
I just wanted to know that can I install LMS 4.0 on a domain server.
View 1 Replies View RelatedNeed to rebuild the server in different hardware.Replace adc server in windows 2003 domain
View 1 Replies View RelatedI have a small network: - Domain server - Terminal Server - DB Server SQL 2008 (windows authentification) Usually, user lost connection to the domain.
View 1 Replies View Related