I am wanting to setup a small network at home. I am using Server 2008r2 64 bit running on VMWorkstation, which is the only way I can run a 64bit OS. I have it installed and running on VM with active directory and a domain created. My problem is trying to join the domain with my other PC's. They cannot find the domain name. The network connection on the VM is set to NAT.
View 2 RepliesWe had a power outage that kicked off our server and our network switch (2008R2, Cisco2960), before we could get it back up, a user was able to log into his laptop.
The user used the domain login - not the local machine account - he obviously wasn't able to access any shared resources, but how did he log in with a domain account, when the server and switch were both off?
i was wondering if i really NEED to install the certificate services role in 2008r2,what do i lose by not having it, and what do i gain by using it ?
View 5 Replies View RelatedWe are in the earlier stages of moving our Domain Controlllers from 2003 to 2008 R2. The remote agents are running in 2003 Domain Controllers. According with Cisco Documentation, I can move the agent to a Windows 2003 Member Server and the upgrade to 2008 R2 Domain Controllers.
View 4 Replies View RelatedI am moving a Windows Server to a new location. We currently have static IPs but are not using any of them so at the new location I requested no new static IPs. With that being said is there anything I need to worry about when I move? From what I have heard it should be a turn it on and go type of move.
View 1 Replies View Relatedhow to use Microsoft server 2008R2 NPS with cisco wlc 4400.am i correct, each LWAPP AP have to be connected to NPS . (this AP is also called access server)?when client tries to connect to the wlan, (in this case lets say we want a user in AD, after providing its creds, can access the network, internet etc) the auth req is sent from AP to NPS/RADIUS? where does WLC come into play here, what does WLC do?
View 3 Replies View RelatedI got a few of these NICs and Windows Server 2008R2 is not installing any drivers.
I tried downloading some drivers off Intel website and still no joy.
Since this is a Dell OEM product, how to get the correct set of drivers?
i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
I can find ip address of any website from domains by using simple command [URL] in command prompt.I wonder how I can find the domain names from ip addresses.For e.g. I would like to know the domain names of ip - 207.232.22.200
View 7 Replies View Relatedhow to find the current logged on user on a domain network? I tried nbtscan but it gives me ip address, machine name and mac address. In the server column it gives <server> and in the user name column it give <unknown>.
View 1 Replies View Relatedhow do I pass from domain server , my network in our compant have ISA server and they close some website like face book , how can I pass over ISA server and use my websites?
View 3 Replies View RelatedI do not have wireless internet access and I get the message "There may be a problem with your Domain Name Server (DNS) configuration" when I try to diagnose the problem.I am on the internet by bypassing the router and having a wired connection from the modem to the computer right now. The problem started when I tried to get a second computer to work with the wireless connection (so with the computer I'm on right now, wireless worked a few days ago). [code]
View 9 Replies View Relatedhow can i add 10 pc's to server 2003 domain
View 1 Replies View RelatedHow has file server been affected by promoting your server to a domain controller? and what are file sever actually do?
View 3 Replies View RelatedI have a 891 router setup as the local DNS server and external lookups from connected devices (and the router cli) work fine. I'm having problems getting internal host lookups working though.
this is relevent part of the config, router ip address is 192.168.100.9:
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.100.1
[Code]....
If I put rearswitch. (i.e. add a single full stop at the end of the hostname) it resolves fine. The same behaviour happens with other hosts defined with the ip host command. Is it possible to use local hostnames without a domain name or full stop?
I just wanted to know that can I install LMS 4.0 on a domain server.
View 1 Replies View RelatedNeed to rebuild the server in different hardware.Replace adc server in windows 2003 domain
View 1 Replies View RelatedI have a small network: - Domain server - Terminal Server - DB Server SQL 2008 (windows authentification) Usually, user lost connection to the domain.
View 1 Replies View Relatedi have been trying share a folder across the network but with a lot of difficulty.the folder is on a server 2008R2 on one domain while the work stations are on a work group. how do i get the work station to access the shared folder without any password issues.
View 2 Replies View Relatedcan i print as am joint to a domain.
View 2 Replies View RelatedI've recently purchased a domain name from GoDaddy, and I'm having trouble setting up my server, which is running Windows Server 2003, to run email using the domain name. Before purchasing, I was using a free domain from DynDNS and it worked using it as an domain address. I'm wondering if maybe I have to set up the DNS on GoDaddy to foward the email protocol to my server.
View 2 Replies View RelatedI have a Cisco 881W configured for wireless (just a PSK, nothing special). I can get out to the Internet OK and browse to everywhere except my own websites.
It runs on a connection that does not connect directly to my network, but our website is available to the world externally.
Now, from the router a traceroute and ping work fine to our website but from the wireless connection I can get to everywhere else on the web but our website. A traceroute just stars out. I'm using 8.8.8.8 as a DNS server and nslookup resolves the DNS.
I can't set a DNS server or domain server on the ap on the 881W so are there any commands I can use to see what's going on?
Differences between using an Apache server on a regular laptop vs. a whole operating system like Windows Server 2008. I'd like to setup an intranet complete with an internal domain name. Is this possible with Apache or do you have to use a complete server operating system like Windows server 2008?
View 1 Replies View RelatedI can't seem to get the browser to properly show spacing.So I was browsing the internet normally, then all of the sudden, I'm disconnected. When I reconnected, I was able to access the network, but unable to connect to the internet. After attempting to diagnose the issue, I got the "There may be a problem with your Domain Name Server Configuration."can't connect to well known host microsoft.com.
View 9 Replies View RelatedMy Primary Domain Server is down and i have to format the server. I have 2 Additional domain controllers. How do I add DC after formating the server in the same domain.
View 1 Replies View RelatedI have configured a my desktop as a domain controller with server 2008..with dns service running on it. When i tried adding another desktop to this domain, i get the following error message
"Troubleshooting network identification Error: This computer successfully resolved the Domain Name System (DNS) service (SRV) resource record required to locate a domain controller, but it failed to locate a domain controller for the Active Directory domain displayed in the error message.
Cause: The required A (address) resource records that map the name of the domain controller to its IP address do not exist in DNS.
Solution: Verify that the required A resource records do not exist in DNS by using the Nslookup command-line tool.
See also: To verify that A resource records exist in DNS. Cause: The domain controller advertised in DNS may not be connected to the network or is connected to the network but is not running.
Solution: Verify connectivity and then verify that the domain controller is running.
See also: To test a TCP/IP configuration by using the ping command; DNS requirements for joining an Active Directory domain."
Work station of domain network stopped accessing the server and internet. Assigned IP address, since DHCP would not hand out automatic IP address. Was working fine before today.
View 1 Replies View RelatedI have a desktop without a wireless card and i want my network to be wireless so i bought a d-link wireless card for the desktop, the system then discover the wireless network but could not connect it kept on trying to authenticate, it did not even ask me for the web security key, what do I do
View 1 Replies View RelatedWhen attempting to log in to a computer (running Windows 7 Professional) here at the office using the network administrator account, I get the error message: "The trust relationship between this workstation and the primary domain failed." I wasn't here when this laptop was set up, and so I don't know if any local user accounts were made or what their passwords would be if they were there, so I can't think of any way to log in to the machine and disconnect/reconnect to the domain which is really my only idea on how to fix it. Finding out what would cause this to suddenly start happening would also be nice, but mostly I just need to figure out how to get reconnected so I can get this back up and running.
View 1 Replies View RelatedI have created individual folders for the different users on the network domain server, but i am having trouble allowing the client to automatically connect to their personal folder.
View 2 Replies View RelatedI have purchased a domain name through a registrar. I currently have a hyper v lab set up at home with a domain controller/dns server and am thinking of starting a web server on either Apache or IIS on a different virtual machine. I want to point my domain name to my home web server.What do I do I have to do at my domain name registrar? I have to point a type of dns record to my home server's public IP and maybe vice versa.I have a static IP at home. Do I have to create some DNS records pointing from my domain name registrar to my server at home using my PUBLIC ip address? If possible please provide specifics on which records I should point to my home server PUBLIC ip address and if any DNS changes need to be made within my domain. Also if any records on my home domain (windows ad domain setup)
I seem to be able to find a lot of info on Apache and IIS but not a whole lot of info on how your web domain name registrar relates to your own web server . I'm not really interested on IIS or Apache specifics but more interested in the fundamentals of how a domain name registrar (GoDaddy, or any other registrar/host) needs to be pointed to your web server and vice versa. I know a lot of people on forums tend to point to links or tell me to go to google but I find it hard to learn that way.
I have WRT54GL v1.1 with last firmware. How to specify L2TP server by domain name? I see only fields for IP.
View 4 Replies View RelatedI'm installing CiscoWorks LMS 4.0, and upgrade, on a domain member server running Windows 2008 R2 SE 64 bit.
View 1 Replies View Related