how to use Microsoft server 2008R2 NPS with cisco wlc 4400.am i correct, each LWAPP AP have to be connected to NPS . (this AP is also called access server)?when client tries to connect to the wlan, (in this case lets say we want a user in AD, after providing its creds, can access the network, internet etc) the auth req is sent from AP to NPS/RADIUS? where does WLC come into play here, what does WLC do?
View 3 RepliesI am wanting to setup a small network at home. I am using Server 2008r2 64 bit running on VMWorkstation, which is the only way I can run a 64bit OS. I have it installed and running on VM with active directory and a domain created. My problem is trying to join the domain with my other PC's. They cannot find the domain name. The network connection on the VM is set to NAT.
View 2 Replies View RelatedI am moving a Windows Server to a new location. We currently have static IPs but are not using any of them so at the new location I requested no new static IPs. With that being said is there anything I need to worry about when I move? From what I have heard it should be a turn it on and go type of move.
View 1 Replies View RelatedWe had a power outage that kicked off our server and our network switch (2008R2, Cisco2960), before we could get it back up, a user was able to log into his laptop.
The user used the domain login - not the local machine account - he obviously wasn't able to access any shared resources, but how did he log in with a domain account, when the server and switch were both off?
I got a few of these NICs and Windows Server 2008R2 is not installing any drivers.
I tried downloading some drivers off Intel website and still no joy.
Since this is a Dell OEM product, how to get the correct set of drivers?
In my organization we are having 12, LMS 3.2 servers deployed across the globe. As per Audit policy we need to deploy Microsoft win2003 server security patches on all servers using WSUS. Every month our server team sends us query before applying the patches regarding it's compatibility with LMS.
View 4 Replies View RelatedHow to be able to get AP1252AG-E-K9 running against Microsoft Windows Server 2008 R2 IAS.I am getting these errors:
RADIUS/DECODE: convert VSA string; FAIL
RADIUS/DECODE: cisco VSA type 1; FAILRADIUS/DECODE: VSA; FAILRADIUS/DECODE: decoder; FAIL
RADIUS/DECODE: attribute Vendor-Specific; FAIL
RADIUS/DECODE: parse response op decode; FAILRADIUS/DECODE: Case error(no response/ bad packet/ op decode);parse response; FAIL
I'm trying to configure 1700 K9 router to act as PPTP client and connect to Microsoft VPN server (in order to enable all clients on LAN to seamlessly access host on remote location). [URL]
I'm using GMS3 to test everything in lab environment. I managed to connect to Microsoft VPN server but the connection drops immediately. Below is debug info from router R1 (router R2 just simulates host on LAN) and configurations for both routers. The only clue I got from debug is that immediately before closing connection there's a message "CCP: Failed to negotiate with peer"...
R1#sh debug
PPP:
PPP detailed event debugging is on
MPPE Packet Details debugging is on
[Code].....
I would like to know if microsoft 2008 server RADIUS server could be use for authentication on Cosco 5508 instead of Cisco ACS.
View 4 Replies View RelatedI ve configures an asa 5505 for remote vpn with anyconnect. it works just fíne - from remote i can ping the Clients and Server inside, i can do RDP or Connect via SSH to any machine, map some volumes local and so on but: I can not connect microsoft sql server. It uses port 1433 for the first connect and establishes then a dynamic connection. So i am a Newbie - what rules or configs do i miss?
View 3 Replies View RelatedCan we integrate cisco acs verison 5.x with active directory Microsoft windows server 2012 ?
View 1 Replies View Relatedwe need to be required to import MAC filter databse from Cisco Wireless LAN Controller (4400) to Cisco ACS Server (v4.2).
View 2 Replies View RelatedDHCP = win2008r2
scope 1:
172.16.1.51 - 172.16.1.200
sub net 255.255.255.0
router: 172.16.1.1
scope 2
172.16.3.51 - 172.16.3.200
Sub net 255.255.255.0
router: 172.16.3.1
Nic1 = 172.16.1.20
Nic2 = 172.16.3.20
[Code] ......
We are in the earlier stages of moving our Domain Controlllers from 2003 to 2008 R2. The remote agents are running in 2003 Domain Controllers. According with Cisco Documentation, I can move the agent to a Windows 2003 Member Server and the upgrade to 2008 R2 Domain Controllers.
View 4 Replies View RelatedIs NPS (windows 2008R2) supports EAP-TLS? I've built an NPS to authenticate wireless clients (WLC 2504). But in the EAP types I only see EAP(PEAP) this only requires a certificate on the server side.
I want the clients also should have a certificate, for that the NPS should support EAP-TLS
After completing an AD upgrade to 2008r2 I've had my fill of roaming profiles. I want to change all users back so that their profile is on their pc. Of course ideally I'd like this to occur with the user affected as little as possible. Most users are still winxp but some win7 machines too.
View 18 Replies View Relatedi was wondering if i really NEED to install the certificate services role in 2008r2,what do i lose by not having it, and what do i gain by using it ?
View 5 Replies View RelatedI have windows server 2008r2 running a FTP server, so I can back up my configs and upgrade IOS when needed. My problem is than I can backup to the server just fine but when i try and restore a config or pull a new IOS over it gives me this error
%Error opening ftp://13****** (Protocol error) this is happening on every switch I have and I can't figure it out.
i am looking for alternatives to Windows System Resource Manager, as we do not have Datacenter or Enterprise editions of 2003, or 2008/R2 terminal servers. The main problem we have is when a user tanks the entire server with Excel in a workbook that would be more appropriate as an Access SQL database rather than being in Excel.
View 3 Replies View RelatedIs it possible to insert a Netgear wireless router b/g 108Mbs into a running 2008r2 network, making it a slave to allow wireless access?
At the moment the menu is only accessible thru 192.168.0.1, but I need to have it visible as a device subservient to 10.151.48.1? If this is possible, I can set it up to do a SSID broadcast for wireless access?
We have two separate external connections, one behind a pix one behind an asa, clients behind either of these firewalls cannot get to skydrive.live.com - the page title loads but then thats it!im debugging behind the pix becuase there is less traffic and ive pulled this from syslog so far-have been googling but not sure if this syslog data is normal or not really
View 9 Replies View RelatedI'm running WCS 7.0.220.0.I would like to authenticate users that are able to logon the WCS, through MS Network Policy Service (RADIUS).I would like all my domain users to be member of the local group on the WCS "Lobby Ambassador", so all domain users has access to generate guest access accounts, for the web auth... I can see under the WCS Administration under AAA that it should be able to use RADIUS - but i'm not sure how to setup the NPS policy?
View 1 Replies View RelatedMy emails are not being sent POP3 failed, is there a troubleshoot, autofix website i can go to
View 4 Replies View RelatedI want to setup a lap environment for my studies using Microsoft Virtual pc. I have installed 3 virtual pc of which 2 are windows server 2008 named srv1 and srv2, the third virtual pc is running windows XP professional services pack 2 with the host operating system being windows 7.I have installed Microsoft loop-back adapter and i am trying to network the 3 virtual pc and the host.
srv1 ip address is 192.168.2.200
srv2 ip address is 192.168.2.201
wk1 ip address is 192.168.2.10
host pc's ip addresss for the loopback adaptor is 192.168.2.5 when i check the workgroup i see only srv1 and srv2 i am only able to ping srv1 and svr2, the rest are unreachable.
have a problem with downloading microsoft silver light with both browsers ie mozilla firefox and internet explorer as i click the download button firefox say silverlight server not loading or busy and explorer says page cannot be displayed and i need it really badly as i need to send photos to all my friends.
View 3 Replies View RelatedI cant access microsoft webpage. I have fresh copy of win XP pro SP3, IE 8, and connected through an updated Vodafone ADSL modem through ethernet. Strange thing is, I can access bank, tv over internet, etc. except MICROSOFT webpages.
View 2 Replies View RelatedI have a problem with my 802.1x Solution in ACS Version : 5.2.0.26. The hours between my ACS and the AD lost synchronize, for that reason the user in my network can't authenticate in the Solution. when i see the hours was different for the AD in 5 minutes, i have to force again the common ntp server 172.25.0.34 (which is ip ntp server). I don´t know why is the reason for lost synchronize, maybe could be a bug.. or samething that i have to configurate in the ACS or AD.
View 3 Replies View RelatedWe're using Cisco Secure ACS 5.2 as a Proxy AAA server, using Active Directory as an External Identity Store. They are already synced and connected and thus I can login into the VPN using my Domain credentials.
But that's not enough. My client needs to limit who can and can't establish VPN session, I mean, the way it is now, EVERY single employee can do that if his/her credentials are valid in the Active Directory domain controller. So I need to do two things:
1) Using the Microsoft NPS server, via dialin attribute, allow or deny VPN sessions using ACS/ASA;
2) Using the company user credential attribute to identify which Authorization Group the requesting user should be in, Downloadable ACLs will then be applied according to the access policies created for each company.
I am transitioning from a Microsoft ISA server to a Cisco ASA 5510. So far so good, until it comes to getting AAA functioning properly. I have a Microsoft IAS server that is functioning properly, however when I try to test it through the ASA's ASDM it errors out. When I run a packet trace it shows it's being blocked by the dreaded implicit ACL. The funny thing is that I can ping and traceroute to the IAS server from the ASA. I found numerous config examples for AAA using IAS, but still not working.
Could it possibly be behaving this way because my ASA and my IAS server are on two different internal netowrks? (172.31.1.x-ASA, 10.1.1.x-IAS)
We just set up the AnyConnect SSL vpn on our ASA. I am able to establish a connection fine using the Cisco AnyConnect client. I would like to use the native Windows VPN client though if possible. What configuration changes on either the firewall or the client I would need to make for this to happen?
View 1 Replies View RelatedAre there any configuration documents that shows how to configure a Cisco ASA5540 for client VPN access using smartcards and Microsoft IAS. Microsoft IAS will stand between the ASA5540 and Active Directory.
View 1 Replies View Relatedi need a documentation or a procedure to how make integration LMS 3.2 with microsoft active directory to make usernames of devices appear in end hosts reports.
View 2 Replies View RelatedI have some users from another company who are visiting my company. The use outlook to access their mail. I think it is via RPC over https (ssl). When there are on my network they are unable to send messages but when the connect to an ISP directly they are able to send. I have a cisco 2821 as my internet router and an ASA5505 (8.0.5...i downgraded it from 8.2.3) as my firewall. I have not blocked anything from going out. Of note is that when other users use window live configured for gmail....which uses tls they are unable to send emails with atachements. Regular emails go though no problem. Hotmail can send atachments without a problem (there is no encrytion there). I have narrowed the issue down to how the firewall treats esmtp or tls traffic passing though it. I have already diabled inspect esmtp on the firewall.
View 2 Replies View Related