How Users On Domain Can Access Print Server
Aug 12, 2011can i print as am joint to a domain.
View 2 Repliescan i print as am joint to a domain.
View 2 RepliesI am trying to bridge my wireless signal from the cable modem/router located upstairs to my TV, Onkyo surround receiver, DVD , & DirecTV DVR which are all located near each other downstairs.I have a wireless print server setup near the downstairs electronics with ethernet cables running from the print server to each component
View 5 Replies View RelatedI have a work PC Behind a domain which can connect to my home network no problems. I have a Homegroup set up at home that has a printer connected and shared to one of my PC's. All PC's behind the HomeGroup (or sharing the same homegroup name) can print to the printer no issue.
How can I set it up to where the Domain PC can print to the HomeGroup Printer?
I've got a windows server 2003 running a big application (sage1000) but suddenly it seems that users cannot access the server by unc path.i've also test to access \server on the server itself doesen't work.
View 2 Replies View RelatedWe have almost 500 users and theres a network printer which people have to add eachone of them if they want to print and thats a procedure and takes time to show everyone all the steps. I wanted to know because we are using a domain which all pics are connected on that domain also the printer how is it possible to make it that the printer is shown on all automaticly?
View 6 Replies View RelatedThis is the first time i've posted an issue with tech support, i currently manage a Windows Server 2008 DC with 15-20 clients running Windows 7.
The issue i am having here is that the printers that are networked are printing extremely slow. Printing as a domain admin seems to be nice and quick as it should. I just cant get my head round it being so slow for the clients.
In my domain users disconnected alternate days the only solution is to rejoin the domain.
View 1 Replies View RelatedI have a WLC 4404 with LWAPs, the customer has a microsoft LDAP and all users are joined to the domain and he wants the users to be authenticated against their domain accounts and this should be done automatically so that when users login to windows they are also authenticated and joined the WLAN.so how we can do that with the simplest way, without Radius server using only the LDAP and wwithout envolving any certificates.also i need to know when i add LDAP server to the WLC, how can i know that this LDAP is properly inegrated with the WLC?
View 8 Replies View Relatedi've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
You are responsible for managing and configuring printers and print servers for your organization. You must determine what you can do to increase the performance of your print servers responding to client print requests. What options are likely to improve print server performance?
View 4 Replies View RelatedSome time our office network will block by print server, when i close it our network work properly, why it is happening and how it will solve ?
View 4 Replies View RelatedMy laptop connects wirelessly via router to RoadRunner/internet and work well.I want to physically (ethernet) connect my laptop (via it's docking station) to a print server and then in turn to a printer."link" light is on, on print server however "pinging" 192.168.0.10 (factory default) fails.
View 9 Replies View RelatedWe are looking for a print server that saves prints to a hardrive when printed from anywhere on a network.What is meant by saves prints meaning that they can be accessed anytime during the future for reference and security reason
View 1 Replies View RelatedI have a NG PS121V2 print server that i had working on my cradle point MBR 900 with a lexmark E238 I lost the MBR 900 during a storm so i picked up a Belkin N300 until i decide what to do about ISP.I can not get the NG Print Server to now. when i go through the setup wizard for the Print server i can configure and print a test page but as soon as i exit the setup wizard i can no longer print? e)
View 1 Replies View RelatedI have a trendnet TEW-P1UG when I connect to it by wireless and I am able to click the test printer on the ip page, but I cant just print things?am I meant to link to the print server from my router? or from my pc that I wish to print from?
View 16 Replies View Relatedusing a linksys psus4 printserver with windows 7?
View 5 Replies View RelatedI am using Tplink TL-WR940N wireless router and recently attached the TPLINK PS110P paralell print server with it. I run the installation wizard on my Windows 7 System. But my router doesnt detect print server...
View 5 Replies View RelatedConfigured a DP-G310 Print Server to work with the DIR 655? I have upgraded the firmware so I have WPA Security. I have typed in the WPA key in the DP-G310 setup. The DIR 655 sees the DP-G310 but it won't assign it an IP address. I can see the DP-G310 MAC address in the DIR 655 wireless status page but the IP is 0.0.0.0 and it disappears and reappears in the wireless connections list.
View 3 Replies View RelatedWe have a new building coming online. It is a layer 3 connection (OSPF) between our core and this building. I have a handful of VLANs configured at this building (using VTP) and I'm having a problem with only 1 of them (the printer VLAN).From the print server (a virtual machine who's host is directly attached to our core switch - a Cisco 6509), I can NOT ping any of the printers at the remote building. But I can ping the gateway for that vlan (which is on the L3 switch/router for the building - a Cisco 3750X).However, if I put a laptop on that vlan at the building, I can ping the print server as well as the other printers.
I ran a traceroute from the print server to the printer's IP address and after hitting the building's router, the requests just started timing out.
I double, triple, and quadruple checked the laptop and printer configurations. In my troubleshooting,I even created a DHCP scope and added the ip helper-address to the interface vlan. My laptop, connected to a switchport on that vlan received the IP address, DNS server info, etc. from the DHCP server (which is on the same vlan as the print server). From my laptop, I could get to all of our internal web servers. I configured the firewall to allow that IP range internet access, and had full internet access on my laptop.But still, I could not ping my laptop or the printers from the print server.
No change in the traceroute.
I then created a vlan interface on the access layer switch (a stack of Cisco 2690Ss) that the printers and my laptop were connected to.From the print server I *could* successfully ping that vlan interface.Traceroute went right to it (3 hops from print server - core switch, router at building, vlan interface on distribution switch).But I could still not ping the laptop or any printers from the print server.
I even wiped out all config related to this vlan - the vlan interfaces on the distribution switch and the L3 switch, deleted the vlan itself, the router network statement, etc. Then rebuilt it all over again.Same results. I've compared every line of config for this vlan to other vlans where this problem is NOT occurring and can find no difference.
I have got a bluetooth print server (Nortek, BT 500). The user manual doesn't contain pairing code. (The serial number or the MAC address doesn't work! The manufacturer's WEB page also doesn't work: [URL] ) I've tried the following codes:
BT500
NORTEK
1A
N44066-00054 (serial number)
[code]....
i don't know the ip address of my DP-301p+ print server. how can i reset it to default ip address
View 1 Replies View RelatedI have a simple question; Does the E4200 have a print server built into it? I have a usb printer that I want to attach to the router so multiple computers can print to it. The printer does not have ethernet or wireless. I will be upgrading the printer later but would like for it to work with all my computers at the moment.
View 9 Replies View Relatedhow do I pass from domain server , my network in our compant have ISA server and they close some website like face book , how can I pass over ISA server and use my websites?
View 3 Replies View RelatedI do not have wireless internet access and I get the message "There may be a problem with your Domain Name Server (DNS) configuration" when I try to diagnose the problem.I am on the internet by bypassing the router and having a wired connection from the modem to the computer right now. The problem started when I tried to get a second computer to work with the wireless connection (so with the computer I'm on right now, wireless worked a few days ago). [code]
View 9 Replies View RelatedI've a Bluetooth print server (Nortek, BT 500). The user manual doesn't contain pairing code. (The serial number or the MAC address doesn't work! The manufacturer's WEB page also doesn't work:[URL]
View 6 Replies View RelatedI have an HP LJ4050 plugged right into one of the open LAN ports on my E4200 with a CAT6 cable. Can this router work as a LAN print server? I can't pull up the IP on a browser window or ping it successfully.The 4050 doesn't have USB capability and I don't want to use the parallel port on my PC unless I have to.If possible, I'd like to have wireless computers on the network be able to print to it as well.
View 5 Replies View RelatedRegion : Spain
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : BT - Arrakis (Spain)
I am trying to get the print server functionality working but no luck. I have a Brother HL-2030 and I know that it is not in the compatibility list. But the HL-2040 is, and the differences between the two are minimal. However, the TP-Link printer utility does not see the printer and the network scanner function is grayed out.
We have:
Print server: TROY PocketPro 100s(Ethernet)
Cisco cat 2960
Cisco 2911
Config Cisco 2911
mac address of print server logged in dhcp pool
i can connect print server with home assus router.he is get dhcp options correctly.
!
! Last configuration change at 18:13:02 Moscow Thu Sep 20 2012 by root
version 15.1
service timestamps debug datetime msec
[Code].....
We have a Server 2008 R2 print server that handles all printing for our mixed windows domain. I am trying to install 64 bit drivers so that our newer 64 bit clients can simply double click on the printer to add it to their list of printers.
According to what I'm reading online, I'm supposed to go into the printer's properties. Click Sharing, then click additional drivers. Makes sense. I select the x64 for the processor type (x86 is checked by default and will not uncheck).
At this point it wants me to locate the drivers. I point it to the HP drivers that I have downloaded for 64 bit processors and hit ok but it tells me "The specified location does not contain the driver HP laserjet 4250 PCL 5 for the requested processor architecture." Which it does, although it is PCL 5e rather than PCL 5.
I also have read that the drivers need to have the same name. I assume this means within the INI file. I've tried to change all the locations to read PCL 5 instead of PCL 5e but it gives another error instead. "Windows cannot locate a suitable printer driver. Contact your administrator."
how can i add 10 pc's to server 2003 domain
View 1 Replies View RelatedI am wanting to setup a small network at home. I am using Server 2008r2 64 bit running on VMWorkstation, which is the only way I can run a 64bit OS. I have it installed and running on VM with active directory and a domain created. My problem is trying to join the domain with my other PC's. They cannot find the domain name. The network connection on the VM is set to NAT.
View 2 Replies View RelatedHow has file server been affected by promoting your server to a domain controller? and what are file sever actually do?
View 3 Replies View RelatedI have a 891 router setup as the local DNS server and external lookups from connected devices (and the router cli) work fine. I'm having problems getting internal host lookups working though.
this is relevent part of the config, router ip address is 192.168.100.9:
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.100.1
[Code]....
If I put rearswitch. (i.e. add a single full stop at the end of the hostname) it resolves fine. The same behaviour happens with other hosts defined with the ip host command. Is it possible to use local hostnames without a domain name or full stop?