I have got a bluetooth print server (Nortek, BT 500). The user manual doesn't contain pairing code. (The serial number or the MAC address doesn't work! The manufacturer's WEB page also doesn't work: [URL] ) I've tried the following codes:
BT500
NORTEK
1A
N44066-00054 (serial number)
[code]....
I've a Bluetooth print server (Nortek, BT 500). The user manual doesn't contain pairing code. (The serial number or the MAC address doesn't work! The manufacturer's WEB page also doesn't work:[URL]
View 6 Replies View RelatedDoes the correct Pairing code for the I phone 4 and the Inspiron 1525.
View 4 Replies View RelatedGeneric bluetooth adapter error code 43
View 2 Replies View RelatedYou are responsible for managing and configuring printers and print servers for your organization. You must determine what you can do to increase the performance of your print servers responding to client print requests. What options are likely to improve print server performance?
View 4 Replies View RelatedSome time our office network will block by print server, when i close it our network work properly, why it is happening and how it will solve ?
View 4 Replies View RelatedMy laptop connects wirelessly via router to RoadRunner/internet and work well.I want to physically (ethernet) connect my laptop (via it's docking station) to a print server and then in turn to a printer."link" light is on, on print server however "pinging" 192.168.0.10 (factory default) fails.
View 9 Replies View RelatedWe are looking for a print server that saves prints to a hardrive when printed from anywhere on a network.What is meant by saves prints meaning that they can be accessed anytime during the future for reference and security reason
View 1 Replies View RelatedI have a NG PS121V2 print server that i had working on my cradle point MBR 900 with a lexmark E238 I lost the MBR 900 during a storm so i picked up a Belkin N300 until i decide what to do about ISP.I can not get the NG Print Server to now. when i go through the setup wizard for the Print server i can configure and print a test page but as soon as i exit the setup wizard i can no longer print? e)
View 1 Replies View RelatedI have a trendnet TEW-P1UG when I connect to it by wireless and I am able to click the test printer on the ip page, but I cant just print things?am I meant to link to the print server from my router? or from my pc that I wish to print from?
View 16 Replies View Relatedusing a linksys psus4 printserver with windows 7?
View 5 Replies View Relatedcan i print as am joint to a domain.
View 2 Replies View RelatedI am using Tplink TL-WR940N wireless router and recently attached the TPLINK PS110P paralell print server with it. I run the installation wizard on my Windows 7 System. But my router doesnt detect print server...
View 5 Replies View RelatedConfigured a DP-G310 Print Server to work with the DIR 655? I have upgraded the firmware so I have WPA Security. I have typed in the WPA key in the DP-G310 setup. The DIR 655 sees the DP-G310 but it won't assign it an IP address. I can see the DP-G310 MAC address in the DIR 655 wireless status page but the IP is 0.0.0.0 and it disappears and reappears in the wireless connections list.
View 3 Replies View RelatedWe have both ADSL2+ and Cable broadband and wish to have them both connected to and accessible on the same network, possibly linked by using the WiFi modem-routers or by adding redundant WiFi modem-routers in bridge mode.The object is to have a seamless each-way fall-back as both broadband feeds have been unreliable in the past, sometimes for weeks at a time and this has had a destructive influence on concurrent college, uni courses and various pocket-money commercial interests.The current situation is to have two separate wired networks running at 100/1000 with limited WiFi access for laptops and mobile device access.All clients would effectively be part of the same workgroup but with a possible future dmz to a small dynamic dns server for non-business convenience and test use. (HTML, PHP, MySQL website development exercises etc.)At present, there are no significant internal security issues within the firewalls provided by the existing modem-routers and there is no significant budget.
View 2 Replies View RelatedWe have a new building coming online. It is a layer 3 connection (OSPF) between our core and this building. I have a handful of VLANs configured at this building (using VTP) and I'm having a problem with only 1 of them (the printer VLAN).From the print server (a virtual machine who's host is directly attached to our core switch - a Cisco 6509), I can NOT ping any of the printers at the remote building. But I can ping the gateway for that vlan (which is on the L3 switch/router for the building - a Cisco 3750X).However, if I put a laptop on that vlan at the building, I can ping the print server as well as the other printers.
I ran a traceroute from the print server to the printer's IP address and after hitting the building's router, the requests just started timing out.
I double, triple, and quadruple checked the laptop and printer configurations. In my troubleshooting,I even created a DHCP scope and added the ip helper-address to the interface vlan. My laptop, connected to a switchport on that vlan received the IP address, DNS server info, etc. from the DHCP server (which is on the same vlan as the print server). From my laptop, I could get to all of our internal web servers. I configured the firewall to allow that IP range internet access, and had full internet access on my laptop.But still, I could not ping my laptop or the printers from the print server.
No change in the traceroute.
I then created a vlan interface on the access layer switch (a stack of Cisco 2690Ss) that the printers and my laptop were connected to.From the print server I *could* successfully ping that vlan interface.Traceroute went right to it (3 hops from print server - core switch, router at building, vlan interface on distribution switch).But I could still not ping the laptop or any printers from the print server.
I even wiped out all config related to this vlan - the vlan interfaces on the distribution switch and the L3 switch, deleted the vlan itself, the router network statement, etc. Then rebuilt it all over again.Same results. I've compared every line of config for this vlan to other vlans where this problem is NOT occurring and can find no difference.
i don't know the ip address of my DP-301p+ print server. how can i reset it to default ip address
View 1 Replies View RelatedI am trying to bridge my wireless signal from the cable modem/router located upstairs to my TV, Onkyo surround receiver, DVD , & DirecTV DVR which are all located near each other downstairs.I have a wireless print server setup near the downstairs electronics with ethernet cables running from the print server to each component
View 5 Replies View RelatedI have a simple question; Does the E4200 have a print server built into it? I have a usb printer that I want to attach to the router so multiple computers can print to it. The printer does not have ethernet or wireless. I will be upgrading the printer later but would like for it to work with all my computers at the moment.
View 9 Replies View RelatedI have an HP LJ4050 plugged right into one of the open LAN ports on my E4200 with a CAT6 cable. Can this router work as a LAN print server? I can't pull up the IP on a browser window or ping it successfully.The 4050 doesn't have USB capability and I don't want to use the parallel port on my PC unless I have to.If possible, I'd like to have wireless computers on the network be able to print to it as well.
View 5 Replies View RelatedRegion : Spain
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : BT - Arrakis (Spain)
I am trying to get the print server functionality working but no luck. I have a Brother HL-2030 and I know that it is not in the compatibility list. But the HL-2040 is, and the differences between the two are minimal. However, the TP-Link printer utility does not see the printer and the network scanner function is grayed out.
We have:
Print server: TROY PocketPro 100s(Ethernet)
Cisco cat 2960
Cisco 2911
Config Cisco 2911
mac address of print server logged in dhcp pool
i can connect print server with home assus router.he is get dhcp options correctly.
!
! Last configuration change at 18:13:02 Moscow Thu Sep 20 2012 by root
version 15.1
service timestamps debug datetime msec
[Code].....
We have a Server 2008 R2 print server that handles all printing for our mixed windows domain. I am trying to install 64 bit drivers so that our newer 64 bit clients can simply double click on the printer to add it to their list of printers.
According to what I'm reading online, I'm supposed to go into the printer's properties. Click Sharing, then click additional drivers. Makes sense. I select the x64 for the processor type (x86 is checked by default and will not uncheck).
At this point it wants me to locate the drivers. I point it to the HP drivers that I have downloaded for 64 bit processors and hit ok but it tells me "The specified location does not contain the driver HP laserjet 4250 PCL 5 for the requested processor architecture." Which it does, although it is PCL 5e rather than PCL 5.
I also have read that the drivers need to have the same name. I assume this means within the INI file. I've tried to change all the locations to read PCL 5 instead of PCL 5e but it gives another error instead. "Windows cannot locate a suitable printer driver. Contact your administrator."
My DIR-655 is setup and working fine with WPA personal encryption to different laptops in my home network. Question: Can I connect a wireless print server (LinkSys WPS54GU2) that only supports 'G' wireless encryption? Can the DIR-655 support a mixed N and G network?Do I have to reconfigure my DIR-655 to the slower WEP encryption and create an entirely 'G' network to include one G network device?
View 1 Replies View RelatedWhether the wireless print server (F1UP0002au) operates under windows 7 and windows 8?
View 1 Replies View RelatedModel : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I'm can't connect to the router print server using my Linux OS (tested on Ubuntu and openSUSE). I'm try connect by using upnp at port 1900. There are no official (native) application and any tech specification, that I'm can use. how to connect to the print server. Under Windows print server works correctly.
Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
I am struggling to get a printer added through the print server. The printer is set up in the TP-Link USB Printer Controller and selected as the auto-connect printer. I can scan through the server, but can't add the printer in control panel or see it as a option when printing. The printer is a Samsung SCX-340F.
Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP : Charter
I've set up my printer (HP PSC 2410) to the router using TL-WDR3600_V1.0_USB Print Service Client Setup and that part's fine. The USB Printer Controller sees the printer as an "auto-connected printer" and I can select the printer as my default to print to. My problem lies with the fact that every time I try to print something, it causes a BSOD. I'm using Windows 8 and checked to make sure the USB Print Service Client Setup program was compatible with Windows 8 before I attempted anything. The HP PSC 2410 printer is on the Print Server Compatibility list so I don't know why I'm having problems.
The error I get each time I try to print is: SYSTEM_SERVICE_EXCEPTION (TplinkUDSTcpBus.sys). One of the draws of this router was that I could hook up my printer via USB and print wirelessly
In my laptop, bluetooth lan access server is shown with crossed mark. I would like to know how to connect it.
View 15 Replies View RelatedI am a single ASA-5510 with CSC module.I want to pair it for active/standby mode for failover .... can it be done if second ASA doesn't have the module? Can I assume the in case of a failover, the traffic won't be checked, and primary does in case CSC module fails?
View 2 Replies View RelatedHow do i get the 12.4 code to assign a dhcp address to my ethernet interface from my server? I deleted the default config on the 1141 and searching has not turned up anything useful.
View 1 Replies View RelatedI have been searching through the cisco docs for a while and i just cant seem to find this info. Can I run aironet 1600's with my wism running 7.0.116? Also, could I run my 1130 series ap's with a wism2? Basically, what is the minimum code level for a lightweight 1600, and what is the maximum code level for a lightweight 1130?
View 3 Replies View RelatedFew months ago I have bought Linksys E900 N300 router and its working fine. I also have a USB printer (make: Canon LBP2900) and Laptop (make:Lenovo G580). I want to make this printer wireless and through my laptop and router I want to give prints to this printer. Is it possible to do like this?
View 2 Replies View Related