Pairing ADSL2+ And Cable For Each-way Fallback
Oct 26, 2011
We have both ADSL2+ and Cable broadband and wish to have them both connected to and accessible on the same network, possibly linked by using the WiFi modem-routers or by adding redundant WiFi modem-routers in bridge mode.The object is to have a seamless each-way fall-back as both broadband feeds have been unreliable in the past, sometimes for weeks at a time and this has had a destructive influence on concurrent college, uni courses and various pocket-money commercial interests.The current situation is to have two separate wired networks running at 100/1000 with limited WiFi access for laptops and mobile device access.All clients would effectively be part of the same workgroup but with a possible future dmz to a small dynamic dns server for non-business convenience and test use. (HTML, PHP, MySQL website development exercises etc.)At present, there are no significant internal security issues within the firewalls provided by the existing modem-routers and there is no significant budget.
View 2 Replies
ADVERTISEMENT
May 2, 2011
I have been using a Linksys Wireless-G ADSL WAG200G, Annex-A Gateway Router and it has been fine, now my ISP have told me that they are modernising the network and will need a router capable of managing ADSL2/ VDSL connections, so will my router be able to do that or will I have to buy a new one? It has firmware 1.01.09?Edit: I see in the DSL Modulation menu which is set at present to "Multimode" I also have options to select ADSL2, ADSL2+, ADSL2 AnnexM, ADSL2+ AnnexM and ASDL2 AnnexL but I do not see any mention of "VDSL"
View 2 Replies
View Related
Sep 6, 2011
I have a Cisco 886G i have configured a fallback mechanism. i did this with a sla track. You can see this in the config below. Bij the problem is that i can't get internet to work when connection is in fail over state. it fails over to Cllular0 and i can ping from router to the internet. that works fine but when i want to use the internet from one of the pc's is doesn't work. i traced it to nat. there seems to be that only one ip nat inside source .... when i change this one from dialer0 to cellular0 i have internet on the computers.how can i configure multiple ip nat inside source... rules or is there an other way to accomplished this?
View 1 Replies
View Related
May 18, 2011
I have got a bluetooth print server (Nortek, BT 500). The user manual doesn't contain pairing code. (The serial number or the MAC address doesn't work! The manufacturer's WEB page also doesn't work: [URL] ) I've tried the following codes:
BT500
NORTEK
1A
N44066-00054 (serial number)
[code]....
View 2 Replies
View Related
May 19, 2013
we are testing WLC v7.4 in our lab. The AP joins fine but when we try to move it to another WLC running 7.2 (simulating a fall-back plan if there are issues with the 7.4 code), it fails saying image not found.
View 4 Replies
View Related
Nov 2, 2010
Ive bought recently WAG160n and Ive watched that I have problem with slow speed of WiFi. On LAN cable its ok. Internet provider gives my up 20Mb/sec. download and up to 1Mb/ses. upload. Ive visited
[code]....
I add, that my previous router: WAG200G on this same line gives me 14-16 Mb/sec. download on WiFi. Why upload speed is ok, but download not?
View 9 Replies
View Related
Jun 8, 2012
I've a Bluetooth print server (Nortek, BT 500). The user manual doesn't contain pairing code. (The serial number or the MAC address doesn't work! The manufacturer's WEB page also doesn't work:[URL]
View 6 Replies
View Related
Aug 17, 2011
I have ACS 5.1 configured to authenticate users based on Active Directory. I have configured wired 802.1x too, with machine authentication enabled on ACS.When I login with credentials that exist in AD, it works fine. Then I configured Windows Authentication to ask for credentials (popup window). But I experience network disconnection when I login with a local account even though I entered correct AD credentials.I want to do the following: for an account that exist on the machine being authenticated (non-AD account), ACS should check its local database and reply with authentication success if it finds it, so the user is granted network connectivity.I heard about Identity Sequence in ACS. But I still don't see the right configuration,
View 2 Replies
View Related
Dec 20, 2011
Does the correct Pairing code for the I phone 4 and the Inspiron 1525.
View 4 Replies
View Related
Apr 12, 2012
I have an issue with AP Fallback not working with two Cisco 4402-50 WLC's. Here is the senerio:
Site 1 has a 4402 (WLC01) running software 7.0.220.0 with 48 associated access points. AP Fallback is enabled in Controller > General and all 48 AP's are set to Critical failover with WLC01 being the primary controller and WLC02 (at site 2) being the secondary.
Site 2 is the location of WLC02 which is also running software 7.0.220.0 but has 0 ap's associated and also had AP Fallback set to enabled.
Your typical active/passive setup
The problem is when WLC01 goes down all of the AP's fail over to WLC02, however when the connection is restored to WLC01 we have to manually reboot each access point in order for them to reassociate back to the primary controller. Isn't AP Fallback enabled suppose to allow the AP's to move back to the primary controller once connection is reestablished?
View 15 Replies
View Related
Jan 22, 2013
I am a single ASA-5510 with CSC module.I want to pair it for active/standby mode for failover .... can it be done if second ASA doesn't have the module? Can I assume the in case of a failover, the traffic won't be checked, and primary does in case CSC module fails?
View 2 Replies
View Related
Feb 9, 2010
I know the way to configure the ASA to fallback to LOCAL authentication, if the Radius server is not available.
Now we would like to authenticate the local users, if the user is not found in the AD. Is this possible and how can I configure this with the new policies? I tested it with "dropping" when the user is not found in the AD, but then the Radius server will be marked as "dead" and the other AD users can't login for a given period. Maybe we can configure the dead time to 0, but this is not as nice it could be.
View 4 Replies
View Related
Feb 14, 2013
I'm deploying a Cisco Mesh infrastructure using WLC 7.2 version and 1552 APs.
This Mesh APs will be connected in the Light Pole and the RAP will be connected to the SP Switch located in this same Pole.
The MAP will be powered using Pole source power and will be connected to the RAP over 5.8 Bach haul.
My Customer asks if is possible that in case of SP Switch lost the connectivity to the Backbone IP, the RAP can connected to another RAP and maintain the connectivity to the Backbone over the Air, like REPEATER FALLBACK mode in Autonomous version.
For that I thinking to change the role of the RAP APs to "MAP with UTP Cable", but I'm not sure that a MAP AP with CAPWAP tunnel over UTP Cable can provide a Down link Backhand to another MAPs. That is possible?
View 3 Replies
View Related
Jul 6, 2011
I plan on moving to a new internet service provider within a few weeks time, and I have a question.I'm going with TekSavvy, and they have a DSL plan which is quite worth it, and I'm in need of a modem when I make the switch. I think I made up my mind on which modem I want, but I just need to know.. can I use ADSL2+ on the DSL service I am going to get?If you need to know what modem I'm going for, I'm going with "TP-LINK TD-W8960N, 300Mbps Wireless N ADSL2+ Modem Router"
View 1 Replies
View Related
Mar 8, 2013
I currently have a Router that is ADSL2 & VPN capable. It currently allows me to work from home and connect to work servers securely. I have used traceroute [URL] in CMD to determine that all web requests/traffic goes through the VPN server rather than just the requests to access files on the VPN server.I don't feel comfortable having all my traffic now go through work servers(the VPN) so I would like to avoid this. I know I have 2 solutions:- Use Split Tunelling on the router where only requests to files on the VPN server will go through the VPN server, all other traffic is not through the VPN. I have heard that this can compromise the whole network as one node is currently 'unsecured' and can affect/compromise the whole network. Is this true?
- Add a second Router that doesn't connect through the VPN. When I finish work I disconnect from the VPN Routers wireless connection and connect through the second routers wireless connection. I would like to take solution 2 because I wont be compromising the whole network but I have some questions:- Is this something you would recommend?
- Is it dangerous? Is it just as compromising as solution 1?
- In Australia we use physical Phone Splitters for our internet physical connection. One side of the splitter connects to a phone line port on the wall. The other side has 2 ports, one for the phone line connection and one for the router/adsl connection. If I have 2 routers I'll need a splitter that has more than 2 ports so I can connect the 2nd router to the internet. Are there Phone Splitters with more than 2 ports and do ISP's allow me to do this?
View 1 Replies
View Related
Nov 2, 2011
I had a Airtel connection with me for which i was provided Beetel 450 BXI ADSL2 + Router to connect to net using wi-fi on my laptop.How ever now i have changed my isp to ortel cable net providers.i access net on my laptop using lan cable connected from cable modem to my laptophow to configure Beetel 450 BXI ADSL2 + Router so that i connect my cable modem to Beetel 450 BXI ADSL2 + Router and access net wi-fi on my laptop. my os is vista.
View 1 Replies
View Related
Feb 28, 2013
Region : Australia
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Im having issues setting up port forwarding with my Synology NAS.
My house is all connected via network cable, going to a main 24-port switch, which is connected to a Modem/Router (TP-LINK in this case). I can access the NAS from anywhere on my home network, send and receive is fine. I previously used a Billion modem/router in the same config and it all worked fine.
The problem is that when going through the Synology setup, it fails to see the tp-link. So therefore I cannot run its port forwarding program to setup all my ports. Which in turn the NAS can't access the internet. I have started going through the port-forward setting on the router interface, and manually entered the ports - i realized that I'm limited to the number of ports i'm allowed to open! I have also run a port testing program, some are successfully opened the others are not.
Is there some button i need to check or switch on the modem?
View 3 Replies
View Related
Feb 18, 2012
I used to have a 877w in the same place and same setup as my current 887, this time though the DMT Bits Per Bin just will not populate on ADSL2+ altough it did work when it sync ADSL1 (same line/DSLAM, just came up ADSL for some reason).
View 6 Replies
View Related
Dec 28, 2010
We have a customer in the UK, who is starting to deploy ADSL2+ circuits for the new sites they are adding to their BT IPClear MPLS network.We want to standardise with a config for each site, but to date have found that we seem to be using a different config for each site. Some are configured using a dialer interface & some using a virtual template.
Why on some of the sites the virtual template method works & on others we have to configure a dialer interface. Also in regards to the speeds, what should we configure as bandwidth statements & also for traffic shaping. I know that the ADSL2+ circuits can operate at various speeds, but am i right in thinking these higher speeds are the clock rate of the line & with the BT IPClear product, the customer only gets the agreed/paid for bandwidth.
As this figure is different in both directions, when the traffic shaping is configured using vbr-rt command, is the amount entered based on the slower upstream bandwidth on the circuit.
View 7 Replies
View Related
Mar 21, 2011
I have a Cisco 877 ADSL2 route rconfigured which isnt working. I think it may be the Telco at fault,I receive the following in a debug ppp negotiation
*Mar 1 01:08:23.300: Vi3 LCP: I CONFREQ [Listen] id 5 len 15
*Mar 1 01:08:23.300: Vi3 LCP: AuthProto CHAP (0x0305C22305)
*Mar 1 01:08:23.300: Vi3 LCP: MagicNumber 0x7498F253 (0x05067498F253)
*Mar 1 01:08:23.300: Vi3 PPP: Authorization required
[code]....
The relevant ATM and Dialer configs are -
interface ATM0
description AAPT ADSL Line
no ip address
no atm ilmi-keepalive
[code]...
View 1 Replies
View Related
Dec 13, 2012
I have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.
View 3 Replies
View Related
Apr 23, 2013
With this modem, can you hook up to the Linksys Smart Apps WiFi?
View 2 Replies
View Related
Mar 14, 2013
Our family has about three computers that use a wireless network that we all share. We have an old Gateway, a WCG200, that is bridged to an E2000, which was set-up ever since we required better security when someone used our connection to illegally obtain movies. We got a letter which warned us of any future violations that could cause legal action, so we looked into our wireless connection to better secure it from any other individuals outside of our household. The WCG200 is connected to the outlet in the wall via cable, and then connects from the Ethernet to the E2000. The E2000 has a stronger security setup than the WCG200, which is the advice we received from our ISP and would allow us to keep the Gateway. It provides a strong signal, but from time to time, we suffer latency or slow loading through all of our online devices, even though our connection speed displays a solid 72.0 Mbps. I've tried the Event Viewer to see any problems, and I have noticed some small things:
- WLAN AutoConfig service has successfully stopped.Wirel?
- WLAN Extensibility Module has stopped. Module Path: C:WindowsSystem32cmihvsrv64.dll
- The server {E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E} did not register with DCOM within the required timeout.
- Broadcom NetLink (TM) Gigabit Ethernet: The network link is down. Check to make sure the network cable is properly connected. [This last one is strange, since I use the Wireless Network Connection with a DW1501 Wireless-N WLAN Half-Mini Card, while the Broadcom adapter is under the Local Area Connection and displayed as not connected.]
Other than that, I'm not quite sure what the recurring problem comes from. Our WCG200 has a firewall enabled and our E2000 has an SPI firewall enabled. The security mode of the E2000 is a WPA2 setup. We have disabled the wireless network of our WCG200 in order to make use of the E2000.
View 9 Replies
View Related
Feb 24, 2012
I have a WAG160N wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.
What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ?
View 1 Replies
View Related
Oct 1, 2011
I'm looking to increase my internet speeds as much as possible and was wondering how much my central splitter affects internet speeds? I have an ADSL splitter at the moment, im going to link 3 photos which shows the splitter and how it is wired. Also if you look at the black phone line which connects my house you can see that only two wires are being used (blue and white)? Is this the right setup for ADSL2 or should all 4 wires be connected to the splitter? Im getting only about 500kb/s download and 40kb/s upload max right
View 8 Replies
View Related
Oct 19, 2011
I have a Netgear N150 Adsl router with Orange and the internet light is constantly red and i have no internet connection i can connect to the router but have no ip address.
View 1 Replies
View Related
Feb 25, 2013
Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : TD-W8970_V1_130201
I just bought online a brand new TD-W8970 modem/router but I'm in trouble with getting ADSL working.I set up a PPPoE connection with the settings from my ISP but the ADSL Led on the device is solid OFF and in the Admin section it says DSL Status: Not Connected.
[code]...
View 5 Replies
View Related
Apr 16, 2013
Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP : Virgin
I've just replaced my aging ZyXel Wireless Router with a TD-W8970 which connects to the internet with no problems whatsoever. However, I have an ethernet connected Western Digital MyBookLive NAS which is happily allocated an IP addess but does not show up on my network on my PC (Windows Vista - fully patched). A usb connected pen drive and exactly the same. Am I missing something blindingly obvious? On the ZyXel the NAS worked with no problems whatsoever.
The problem with the NAS was my internet security Bitdefender. For some reason, on installing the TP-W8970, it switched my firewall status to public from home/office. Corrected that and the NAS can now be seen over the network. This does not fix the USB attached pen drive not being seen problem though.
View 2 Replies
View Related
Apr 17, 2013
Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
According to inSSIDer the router seems to be using two wifi channels (10+6) and inSSIDer is recommending to move to a standard channel (1,6,11).
View 1 Replies
View Related
Nov 8, 2012
Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : BT Broadband
Just got myself a new Modem/Router (TD-W8960N), and it wasn't until I had it all up and running that I realised it didn't have USB port on the back.Anyways, I was wondering how I could go about fixing this? I stumbled upon this (TP-Link TD-8817) on Amazon and wasn't sure if I could attach this to it in bridged mode or something. This has the USB socket I need. If this was all I needed, how do they connect together? I have a BT connection btw.Also, I have a Justop Android 4.0 TV Box (media player). Would this be able to see the HDD for streaming movies.
View 2 Replies
View Related
Jan 16, 2013
Region : NewZealand
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 1.2
ISP : Now.
Is the TL-MR3420 (previous model/shape) compatible with ADSL2+? I can't find clear indication that it is or isn't
View 1 Replies
View Related
Mar 27, 2013
I've been using Belkin modem/routers/network adapters for years and am quite happy with my current Belkin N+ wireless router (model F5D8635-4 ver1). I am in the process of upgrading my home broadband from ADSL to ADSL2+ which, in theory will increase my download speed from approx 5mbps to 17mbps. I have been offered a free Thomson (Technicolor TG582n Pro) router. This will involve reconfiguring the current set up with all the devices currently connected to my network. Not a big deal but will there be any benefit over my existing Belkin set up?
View 1 Replies
View Related
Jan 12, 2013
Region : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version :
ISP :
problem with filtering
Region : Syria
Model : TD-W8901G
ver 6.0
54Mbps wireless G ADSL2+:
I used the url filter utility inside the router program. I put some url for example www.google.com, I wanted to try the filtering cababilty, Later I deleted all these adresses , but unfortunatley it keeps telling me the following message: "The system returned: (110) Connection timed out The remote host or network may be down. Your cache administrator is webmaster@proxy1."
View 1 Replies
View Related
