Cisco WAN :: Unable To Reconfigure 877 ADSL2?
Mar 21, 2011
I have a Cisco 877 ADSL2 route rconfigured which isnt working. I think it may be the Telco at fault,I receive the following in a debug ppp negotiation
*Mar 1 01:08:23.300: Vi3 LCP: I CONFREQ [Listen] id 5 len 15
*Mar 1 01:08:23.300: Vi3 LCP: AuthProto CHAP (0x0305C22305)
*Mar 1 01:08:23.300: Vi3 LCP: MagicNumber 0x7498F253 (0x05067498F253)
*Mar 1 01:08:23.300: Vi3 PPP: Authorization required
[code]....
The relevant ATM and Dialer configs are -
interface ATM0
description AAPT ADSL Line
no ip address
no atm ilmi-keepalive
[code]...
View 1 Replies
ADVERTISEMENT
Mar 24, 2013
When i enter configuration mode for ATM any DSL commands are not recognized. Believe i have the right IOS.
.ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M4.bin"Last reload type: Normal Reloadversion 15.1service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname Router!boot-start-markerboot-end-marker!!no aaa new-model!
[Code] .......
View 2 Replies
View Related
Apr 29, 2013
Region : India
Model : TD-W8951ND
Hardware Version : V4
Firmware Version : 4.0.0 Build 120607
ISP : Airtel[/COLOR]
I have wifi connectivity issues. After continues usage the wifi connection fails suddenly. And doesn't work till I restart it.
View 2 Replies
View Related
May 7, 2013
Region : India
Model : TD-W8951ND
Hardware Version : V5
Firmware Version :
4 lan ports problem in my modem. Able to get internet through wifi but unable through lan ports.checked in 2 pcs and 1 laptop
View 1 Replies
View Related
May 10, 2013
Region : India
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : S/N: 12B79605315
ISP : BSNL Data One
I had Purchased a brand new TP-Link WifI Modem Router TD-W8961ND with S/N : 12CB5200872 from [URL] and it got delivered few days back. When I am trying to connect it to the internet the modem is not getting connected nor configured. The Power button light, ADSL Light and internet light are continuously blinking and nothing is getting steady. The modem is appearing to be a damaged piece of modem and it is very unfortunate that we have got a modem from flipkart in an unserviceable condition. It came with a warranty of 03 years and I wanted a replacement so that I can use the modem for connecting internet.
View 1 Replies
View Related
Jan 12, 2011
I recently switched my connection from DSL to Cable and Linksys is telling me that I need to reconfigure my router, but they want to charge me for the tech support.
View 7 Replies
View Related
Nov 22, 2011
bought a home 3 weeks ago where there was already a linkysys router ewhen got internet hooked up they did using that already exsisting router. internet been workinhg fine till yesterday modem thru cable working good and right lights on linksys router working. but cant connect to the internetcalled linksys and said warranty up on this router and they want me to pay for continued phone supopoert for 30-50 dollars really.
View 1 Replies
View Related
Aug 5, 2012
We recently upgraded our bandwidth and I have to change the ip address on our ASA 5510. I just want to make sure that I am doing it right. All I will need to do is open up the ASDM and under confiugration go to interfaces and make the needed changes to the outside interface. Then under routing I will make the gateway IP change on the outside interface.
View 4 Replies
View Related
Nov 25, 2012
Today the power was fallen out in our area and the rv042g was turned off.After the power was back I was checking the router because some trafic didn't came through.Then I saw that all the services were messed up and also all the firewall rules were wrong.the lines were still there but it all was setup as [all 0-0].
After trying to restore a backup it gave me the same, even after resetting the router with the reset button for 30 seconds and doing a restore it didn't work.So I had to reconfigure the router from scratch.This services thing gives me a real pain in the *** because in a previous topic I also have mentioned that something is wrong with the services.
View 6 Replies
View Related
Aug 12, 2012
how to get into Motorola WiAP100 to reconfigure?
View 10 Replies
View Related
Sep 11, 2011
I just bought a DI-614+ router and i need to reconfigure it for personal use. What is the admin username and password?
View 2 Replies
View Related
Mar 2, 2011
I need to re-configure the passphrase configured on my HP printer.How do you run the wireless network set-up in order to re-enter my wireless network WPA security passphrase?
View 1 Replies
View Related
Sep 13, 2012
i moved houses and am trying to reconfigure my netgear wireless router, instead of using my apple hotpot?
View 1 Replies
View Related
May 1, 2012
there were three 3750s in a stackwise configuration but later it was decided to remove sw #1 from the stack and make it a standlone sw. I was trying to reconfigure the new combination and tried renumbering the switches and also changed the priority but the switch #1 in a stack if 2 now, shows three switches still!?how can I make sure that new configuration is done clean and the master switche only shows two switches with switch number 1 being master i.e. with "*"?
View 3 Replies
View Related
Jun 10, 2011
Upon turning on the computer, the wireless will not connect. It seems to not recognize the configuration of the wireless. I have to go in and put in the key every time... and then there are times that it says "limited or no connectivity". We just had a new router/modem installed in our network just yesterday. This router/modem is in conjunction with cable tv difficulties we were having.
View 3 Replies
View Related
Apr 26, 2012
I have a wireless router and have lost connection. How do I reconfigure my system to get connected back to internet?
View 1 Replies
View Related
Oct 28, 2012
I have been set out to pasture by the Linksys support staff as I have passed my 90 free tech asstistance period. I had a power outage and now I have a solid Cisco light on the top of the router but I can not get any port light activity on the router. I don't see how I can reconfigure it if the system can not even access it?
View 9 Replies
View Related
Jul 30, 2010
I have a dir-825 connected to Cable modem and a dap-1360 connected I have both wireless and wired clients.If get a ip address conflict and the the dir-825 connection fails from the cable modem and nothing seams to restore that connection, i reboot both route and modem and make sure no client are on. The only way i can figure out how to restore the router is to reset and reinstall from factory state.I can recreate this on 2 different router "825" with factory and updated firmware.I have removed the wireless extender form the picture and this issue has stopped, it might be the extender of a client off the extender. But everything uses DHCP so I'm not sure why ip address conflicts could cause this issue.
View 2 Replies
View Related
Feb 4, 2013
I have a Linksys E3000 router, which originally had all sorts of security settings, and names for the wireless networks, etc. It was all set up. I upgraded the firmware, and all of those settings sent away. Is there a way to reconfigure the settings to get them back to how they were, and if so, how do I do it?
View 2 Replies
View Related
Jun 28, 2012
I am using an EA4500 with the latest firmware that support the Cisco Connect Cloud. I am connected to the Internet and I need to edit the Internet settings and select a different internet setting: Static IP from the current setting DHCP. I select the option from a drop-down menu after selecting Edit, but there is no edit and no drop-down menu.
View 9 Replies
View Related
Aug 20, 2012
I need to clear the old DSL settings out of my E2000 router to switch to my new cable provider.
View 2 Replies
View Related
Oct 16, 2009
My router worked fine. Comcast did updates and now it wont work. If I connect the cable modem to the laptop the internet works fine.It's the router. She said I need to reconfigure it. I tried looking on the site, typing in the 192.168.1.1 thing and the password "admin" is not correct.
My cable modem is Motorola SB5120. My linksys is WRT54G2 V1. how to reconfigure this to work! We work from home and this is a huge obstacle for us to not have wireless internet
View 9 Replies
View Related
Feb 11, 2012
Been using a BEFSR41 with a Speedstream 5200 modem for 7 years with 3 Apple computers. The modem is outdated for todays speeds. Windstream gave me a “new” modem Gagaset 4300. After configuring the 4300 I replaced the 5200 with the 4300. With this setup the computers are not able to connect to the internet. The LED lights on the router do light up and the computer’s networks show there is an ethernet connection but no joy when I try to launch a browser or get email However I could connect the 4300 directly to one computer and get email and search the web. The Windstream tech (phone call) said the router needs to be reconfigured so it can “talk” to the 4300 modem. If this is true how can I configure the router if I cannot get to the Linksys -router web pg?
View 3 Replies
View Related
May 5, 2012
I looked around the messages, but could not find anything on this topic. I need assistance with the CISCO WRT54G2 V1. I have an EnGenius EOC5611P (500mW) Repeater set up in my RV and it connects directly to the PC inside my RV using, a CAT 5 connection. I am now using a laptop and would like to connect to the EOC5611P using wireless. "Can I re-configure the WRT54G2 to connect the 5611?" (I would plug the router directly into the 5611). According to EnGenius support, it is possible, but the router would have to be re-configured, but they do not support this setup. I would purchase an EnGenius EAO 7530 which would work perfectly, but the price is $245. Here is the link to the 5611 information [URL]
View 3 Replies
View Related
Mar 14, 2013
i was able to configure (via SF200 web interface) a port mirroring from port FE17 to FE7.i have supressed this port mirroring.when i try to reconfigure a port mirroring from port FE17 to FE3. The SF200 web interface crash. the SF200 seems to reboot.
i have updated the SF200 firmware from V1.1.2.0 to V1.1.2.9.44 when i was able to configure (via SF200 web interface) a port mirroring from port FE17 to FE7.But after having suppressed this port mirroring again, i was not able to reconfigure a new port mirroring from port FE1 to FE3 (the SF200 hangs).
i have also tried to return to default factory setting but this does not solve the issue.i am working on SF200-24P
View 2 Replies
View Related
Feb 18, 2012
I used to have a 877w in the same place and same setup as my current 887, this time though the DMT Bits Per Bin just will not populate on ADSL2+ altough it did work when it sync ADSL1 (same line/DSLAM, just came up ADSL for some reason).
View 6 Replies
View Related
Dec 28, 2010
We have a customer in the UK, who is starting to deploy ADSL2+ circuits for the new sites they are adding to their BT IPClear MPLS network.We want to standardise with a config for each site, but to date have found that we seem to be using a different config for each site. Some are configured using a dialer interface & some using a virtual template.
Why on some of the sites the virtual template method works & on others we have to configure a dialer interface. Also in regards to the speeds, what should we configure as bandwidth statements & also for traffic shaping. I know that the ADSL2+ circuits can operate at various speeds, but am i right in thinking these higher speeds are the clock rate of the line & with the BT IPClear product, the customer only gets the agreed/paid for bandwidth.
As this figure is different in both directions, when the traffic shaping is configured using vbr-rt command, is the amount entered based on the slower upstream bandwidth on the circuit.
View 7 Replies
View Related
Mar 15, 2012
I just bought myself a Cisco 877W in hope that I could touch up on my IOS skills. The configuration went well, however I have found that after configuring the Dot11Radio0 interface, the ADSL2+ has slowed down dramatically. I am still syncing at a decent speed (decent enough for how far I live from the exchange), but web browsing and other internet traffic is horrible. Originally, I was downloading at ~500kb/s, but now I can't even navigate to a website to perform testing. :
I have another ADSL2+ modem which works just fine (using it right now to write this post)
I originally thought this may have been a DNS issue. However, performing an nslookup on various sites from both the router itself and a client PC shows that resolution occurs in only a few seconds. With that said, there are some sites which will load in an instant (Google.com, for example) while others will simply refuse to load. DNS server (Server 2k8) is on the LAN with forwarders to ISP DNS addresses.
View 1 Replies
View Related
Jan 24, 2013
cofigure a ADSL2+ Conexion in an 1941 router.line protocol are up but didn't have ip adresse in my interface.[code] i don't know how i can find the probleme, and debug's comandes no show me anything.
View 3 Replies
View Related
Jul 30, 2012
I’m testing a 1841 with 2 WIC-1ADSL cards, but the connections are dropping every 30-50mins. If I swap the cars out for HWIC-1ADSL’s then the lines are stable. I’ve had the profiles on the lines dropped the 4mb down and 512k up but I’m still getting the same issue.
I’ve tried a few 1841’s with various IOS’s and different WIC’s but still get the same result.
View 2 Replies
View Related
Jul 6, 2011
I plan on moving to a new internet service provider within a few weeks time, and I have a question.I'm going with TekSavvy, and they have a DSL plan which is quite worth it, and I'm in need of a modem when I make the switch. I think I made up my mind on which modem I want, but I just need to know.. can I use ADSL2+ on the DSL service I am going to get?If you need to know what modem I'm going for, I'm going with "TP-LINK TD-W8960N, 300Mbps Wireless N ADSL2+ Modem Router"
View 1 Replies
View Related
Mar 27, 2012
I'm trying to configure an 887VA for a pppoe ADSL2+ connection with no luck.I know the ISP requires pppoe (LLC), and the pvc is 8/35.
The CD light is on, and the line is up, but the 887 just won't connect
View 3 Replies
View Related
Jul 16, 2012
I am new to the Cisco routers but am trying to get a Cisco 887va working on a Eircom ADSL2 connection.
I was using the config of an old Cisco router as a guide, basically this has encapsulation aal5snap under the ATM interface, I am unable to set this in the 887va, I did read that this needs to be set under the VDSL controller however it will not take the commands. Also how can I set the the dsl operating-mode to auto.
Here is my config
Building configuration...
Current configuration : 1958 bytes!! Last configuration change at 13:20:03 UTC Tue Jul 17 2012version 15.1no service [code]...
View 3 Replies
View Related
