How To Configure Beetel 450 BXI ADSL2 / Router
Nov 2, 2011
I had a Airtel connection with me for which i was provided Beetel 450 BXI ADSL2 + Router to connect to net using wi-fi on my laptop.How ever now i have changed my isp to ortel cable net providers.i access net on my laptop using lan cable connected from cable modem to my laptophow to configure Beetel 450 BXI ADSL2 + Router so that i connect my cable modem to Beetel 450 BXI ADSL2 + Router and access net wi-fi on my laptop. my os is vista.
View 1 Replies
ADVERTISEMENT
Nov 18, 2012
I cannot open the config page of beetel adsl2 router using 192.168.1.1I have connected my laptop to router via Lan cable. Now when I give the ipconfig, I get some random IP and does not get the default gateway: Autoconfiguration IPv4 Address. . : 169.254.129.188 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . :I cannot ping 192.168.1.1 nor 169.254.129.1 thus the web page of router cannot be opened.This all happened after I reset my router.
View 3 Replies
View Related
Mar 26, 2012
to configure beetel 450tc1 wifi router with tikona broadband connection.
View 3 Replies
View Related
Jul 22, 2012
I have Binatone DT 815 ADSL2 router (not wireless) with Airtel broadband connction. Recently it has started causing problem. About once in a fortnight, like � Additional log on information may be required� or �Your router is not registerd with us� or things like that. So every now and then the technician has to be called for configuring the router. After that it works for some days. Then again the problem and reconfiguring, which is quite problematic.
View 1 Replies
View Related
Dec 29, 2011
I am using Beetel 450TC1 router with my MTNL Triband (India) internet connection. The router is connected to my PC through an ethernet port. The other devices (laptops and cell phones) connect to the router through WiFi.As I usually download movies through my PC (connected to ethernet) and it hogs a lot of bandwidth, I want to give my PC (or P2P applications) the lowest priority. Thus, when multiple devices are connected and the PC is downloading a huge file, the other users should not get a poor bandwidth/ speed.I accessed the QoS settings page, but it has a lot of fields and I dont know the meaning of most of them.
View 6 Replies
View Related
Jan 1, 2013
I have a Beetel 450BXi modem with is ADSL2+Modem.It was provided by an ISP (ISP-1) however I have changed my ISP (ISP-2) and was using this modem satisfactorily for some time. However due to change in locality, I had to subscribe to a new connection of ISP-2, however the modem is not working even after hard reset.The ISP-2 network guy is not able to figure out the problem. They swapped the modem with their own modem which was working fine, however the beetel modem is not working. In the beetel modem DSL and WLAN links are working perfectly however the Internet link is not working.
View 2 Replies
View Related
Oct 29, 2012
I have Beetel 450TC1 Wifi router (3 yrs old) and configured with BSNL broadband. The DSL light goes in stable state whenever I took the phone in dialing mode. And internet working well at that time. When I put my phone down, again goes off!
View 1 Replies
View Related
Dec 31, 2011
I want to setup secure Wi-Fi on my Beetel ADSL modem/router. What are the parameters which I need to setup through the modem web interface?
View 1 Replies
View Related
Jan 24, 2013
cofigure a ADSL2+ Conexion in an 1941 router.line protocol are up but didn't have ip adresse in my interface.[code] i don't know how i can find the probleme, and debug's comandes no show me anything.
View 3 Replies
View Related
Mar 27, 2012
I'm trying to configure an 887VA for a pppoe ADSL2+ connection with no luck.I know the ISP requires pppoe (LLC), and the pvc is 8/35.
The CD light is on, and the line is up, but the 887 just won't connect
View 3 Replies
View Related
Feb 3, 2013
Region : France
Model : TD-W8151N
Hardware Version : V3
Firmware Version : latest
ISP : OrangeF
Received today my modem, configured it with some effort but it works... Now i'm trying to save ma config file (rom-0) using web interface, and when clicking on Maintenance > Firmware, i'm always getting:bug.jpg Seems to be a big bug
View 4 Replies
View Related
Feb 4, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
I have an unused TD-W8151N. I also have a smart TV that requires a wired connection, with no way of getting a wire to it.
Can I configure my spare TD-W8151N as a client of the existing WiFi network and connect the TV in to the TD-W8151N with a cable?
View 2 Replies
View Related
Sep 7, 2012
how to change wifi password
View 1 Replies
View Related
Dec 8, 2012
I use Airtel internet and now i will be using MTNL so i will need drivers for my modem to use MTNL so how to find the drivers for my modem?
View 1 Replies
View Related
Jan 27, 2012
I am in a problem, my modem gets hacked everyday, such that many of the sites do not open and only "http://212.113.36.83/" opens instead of sites like yahho.com, sify.com. I checked on internet many people are facing such issue.Only thing I can do to resolve this is to reset my modem, but still this gets hacked even on changing my password.I am not able to understand how is it possible to modify the settings of modem when I have changed the password.Modem Model: Beetel 220BX.
View 5 Replies
View Related
Jan 16, 2013
Region : NewZealand
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 1.2
ISP : Now.
Is the TL-MR3420 (previous model/shape) compatible with ADSL2+? I can't find clear indication that it is or isn't
View 1 Replies
View Related
Jan 10, 2012
I use a wired network connection to my neighbours Vodafone Modem (We share his monthly cost). I also have a TP-LINK 54M Wireless ADSL2+ Router from a previous broadband contract with a landline phone company. Is it possible to reset and configure the TP-LINK Router to act as a relay unit, connected to the network cable, so I can then use my laptop elsewhere in the house?
View 3 Replies
View Related
Apr 29, 2013
Region : Others
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 5.0.0 Build 120522 Rel.23978
ISP : Nepal Telecom
My router said it has Wireless Access Point and WDS.I think to use this router as a repeater?
View 1 Replies
View Related
Jan 18, 2011
I need to look at options for terminating multple ADSL2+ circuits in the UK.Is it worth investing in a router to terminate multiple connections? Or do you think I could just use multiple 877 routers connecting to a good core multilayer switch?
View 1 Replies
View Related
Nov 29, 2012
Region : UnitedStates
Model : TD-W8961ND
Hardware Version : V2
Firmware Version :
ISP : ATT
I want to add more users to my home network and I couldn't, at this moment I only can connect 8 devices (12 devices at least) when I try to connect the next one its impossible, but if I take off one of the connected devices then the router allows to connect the new one.How can I connect more than 8 devices to my router ? (wireless)Also, is there any limits with Wireless MAC Address Filter ? because I can't add more than 8 MAC addresses in my old router I could do that.
View 4 Replies
View Related
Mar 26, 2013
Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : BSNL
I Bought thisTD-W8968 a month back.. It was working alright till a few days back. From the past 3days i'm experiencing internet light and DSL light going off...The DSL light is not constant even for 5min...When the DSL light comes up, the internet light takes almost 5min to comeup or before internet light come up the DSL light goes off.There wasn't problem with my old UT star modem..I already checked,its running fine without disconnection..When i replace it with TD-W8968 router ,the problem continues.. When my internet connection was good...The SNR margin was like 25 for upstream and 31 for downstream...After 2 days it went mad. here are the images shows about current reading..Fluctuates between 0.2 - 100 upstream and 2-35 for downstream
View 1 Replies
View Related
Jan 2, 2013
Region : India
Model : TD-W8101G
Hardware Version : V3
Firmware Version : 3.0.0 Build 110119 Rel.26016
ISP : BSNL
Recently my wireless router has started disconnecting again and again...Whenever I connect it to my desktop and laptop (sometimes iphone), it disconnects in between which causes a lot of delay .The work which could be completed in minutes takes hours. Here is my current system log from the router : code...
View 1 Replies
View Related
Mar 21, 2013
Region : United Kingdom
Model : TD-W8960N
Hardware Version : V1
Firmware Version :
ISP : Unforced 9
I am struggling to get my blackberry Z10 to connect to the router.
View 1 Replies
View Related
Jan 24, 2013
Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V4
Firmware Version :
ISP : Be Internet
I have a router supplied by my ISP which is effectively locked down, the wireless on that router give me a massive 35 Mbps (yes i know... awesome) so I wanted to get something that would allow me to stream movies wirelessly in the house. The setup I had before was Thompson DSL router downstairs (ISP router) running the DSL connection and Wireless, a TP-Link 200Mbps Power over Ethernet connecting upstairs to a Netgear ADSL Wireless router (somewhat flaky device). This router had DHCP disabled and a static IP address, I had configured wireless with the same SSID, password and channel as the ISP router and they were all happy and everything was working (most of the time except when the netgear would crash or the 35MB wifi was too slow to achieve what I wanted).
What I would like to do is this... ISP router downstairs with wifi disabled so it just handles DHCP and DSL connection, router upstairs (New TP-Link) running new WiFi, DHCP disabled (static IP address for Router) but connected to router downstairs through TP-Link Power over Ethernet.
I was hoping it was as simple as the Netgear router where disabling DHCP was enough for it to see the other router and just work but it isn't doing that
I can ping the ISP router but cannot get to the internet,
View 2 Replies
View Related
Mar 1, 2013
Region : France
Model : TD-VG3631
Hardware Version : V1
Firmware Version :
ISP :
I tried to upgrade a TD-VG3631 that came with firmware version TD-VG3631_V1_120929 to the latest TD-VG3631_V1_130108 version.[url]...Is there a recovery procedure to flash back a firmware?
View 2 Replies
View Related
May 4, 2013
Region : Canada
Model : TD-W8960N
Hardware Version : V1
Firmware Version :
ISP : Bell Canada
Can I use TD-W8960N an additional router with my ISP bell router. Will it increase my speed and range of internet in my home.
View 1 Replies
View Related
Apr 16, 2013
i have problem connecting Cisco 867VAE this is my config and my diagnostic file ( IOS version ==> c860vae-ipbasek9-mz.151-4.M4.bin )
diag file :
sBelfort#sh atm int atm0
Interface ATM0:
AAL enabled: AAL5,, Maximum VCs: 2, Current VCCs: 0
VCIs per VPI: 1024,
Max. Datagram Size: 2096
PLIM Type: ADSL - 4608Kbps Upstream, DMT, TX clocking: LINE
[code].....
View 6 Replies
View Related
Mar 24, 2013
When i enter configuration mode for ATM any DSL commands are not recognized. Believe i have the right IOS.
.ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M4.bin"Last reload type: Normal Reloadversion 15.1service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname Router!boot-start-markerboot-end-marker!!no aaa new-model!
[Code] .......
View 2 Replies
View Related
May 3, 2012
I have a video conferencing device and I struggled a lot with a bunch of different routers. I was giving up but then I plugged in a friend's old Linksys/Cisco Adsl gateway and all the problems disappeared (kudos to Cisco). The problem is that the gateway is not ADSL2+. I have since borrowed a Linksys/Cisco ADSL2+ router, however, there isn't a possibility to enter port speeds/duplex manually (required to prevent packet loss in video conferencing, I really want to have that option for the peace of mind). I have been looking around on the internet but I can't seem to find this ability any routers' specs. What I need is as follows:
- Has to be Cisco or Linksys router
- Has to be ADSL2+ (Annex A)
- Doesn't have to be wireless, even single port is OK
- Preferably has DMZ
- Ability to hard code lan port speed/duplex (i.e. no autosense)
- No other functions needed so hopefully a cheap option
View 17 Replies
View Related
Sep 2, 2011
I recently took a cisco linksys ADSL2+Wireless router, it has a DSL pin for internet connection (which is four pin, i.e. RJ11 connector) but i have a cable net, it has an 8 pin connector i.e. RJ 45
View 4 Replies
View Related
May 7, 2012
When I start up my computer I cannot get an Internet connection. To get a connection I have to go into Control Panel, open Device Manager, click on Network adapters, which opens Realtek PCIe GBE Family Controller. I uninstall the Controller, restart and I then get an Internet connection. The Realtek controller then re-installs itself. I am using Windows 7 Home Premium operating system on my desktop. I am wired through a Dynalink RTA 1320 Rev 2 ADSL2+ Modem Router (provided and checked by my ISP). I have a Netgear Wireless N Router WNR 2000 for wireless connection to my laptop which has a Vista operating system. I have no connectivity problems to the laptop. I have had the connections checked by my ISP and the Netgear router by Netgear. They have both confirmed that there is connectivity to the desk top and the laptop and that the connections are working. Both have said that there is an issue with the operating system. I have got all the latest drivers installed and I get the message "Best driver software for your device is already installed".
View 10 Replies
View Related
Oct 21, 2012
Nearly every morning/evening I have to re-boot my router to get internet access. Netgear N300 ADSL2+ modem router Model DGN 2200 (had about a year), Windows 7 64bit Home premium Laptop connected wirelessly, Windows 7 64Bit Home Premium desktop connected by LAN cable. ISP BT Internet. Until recently this set up has been working OK with occasional loss of interent access and need to re-boot router. The internet light has been showing red on those occasions. Over the last two weeks I have found that when I turn one of computers on although all lights on router are green I have no internet access. I have to re-boot, then all is OK until the next day when I have to re-boot again. My phone line appears OK with no noise on line, no reported problems on BT broadband staus. The thing that puzzles me is that the lights are all green on the router yet my networking icon on the pc shows an exclammation mark and 'no internet access' and I do not have access to net.The wireless connection is OK with excellent strength.
View 7 Replies
View Related
Oct 16, 2012
Region : Egypt
Model : TD-W8961ND
Hardware Version : V3
Firmware Version :
ISP :
my router is placed in my home. i want to access to it with IE from my office.but no luck.also i try to ping the WAN ip address of the router.
View 2 Replies
View Related
