Unable To Use Beetel 450BXi Router With A New ISP Connection?
Jan 1, 2013
I have a Beetel 450BXi modem with is ADSL2+Modem.It was provided by an ISP (ISP-1) however I have changed my ISP (ISP-2) and was using this modem satisfactorily for some time. However due to change in locality, I had to subscribe to a new connection of ISP-2, however the modem is not working even after hard reset.The ISP-2 network guy is not able to figure out the problem. They swapped the modem with their own modem which was working fine, however the beetel modem is not working. In the beetel modem DSL and WLAN links are working perfectly however the Internet link is not working.
View 2 Replies
ADVERTISEMENT
Mar 26, 2012
to configure beetel 450tc1 wifi router with tikona broadband connection.
View 3 Replies
View Related
Dec 29, 2011
I am using Beetel 450TC1 router with my MTNL Triband (India) internet connection. The router is connected to my PC through an ethernet port. The other devices (laptops and cell phones) connect to the router through WiFi.As I usually download movies through my PC (connected to ethernet) and it hogs a lot of bandwidth, I want to give my PC (or P2P applications) the lowest priority. Thus, when multiple devices are connected and the PC is downloading a huge file, the other users should not get a poor bandwidth/ speed.I accessed the QoS settings page, but it has a lot of fields and I dont know the meaning of most of them.
View 6 Replies
View Related
Nov 2, 2011
I had a Airtel connection with me for which i was provided Beetel 450 BXI ADSL2 + Router to connect to net using wi-fi on my laptop.How ever now i have changed my isp to ortel cable net providers.i access net on my laptop using lan cable connected from cable modem to my laptophow to configure Beetel 450 BXI ADSL2 + Router so that i connect my cable modem to Beetel 450 BXI ADSL2 + Router and access net wi-fi on my laptop. my os is vista.
View 1 Replies
View Related
Oct 29, 2012
I have Beetel 450TC1 Wifi router (3 yrs old) and configured with BSNL broadband. The DSL light goes in stable state whenever I took the phone in dialing mode. And internet working well at that time. When I put my phone down, again goes off!
View 1 Replies
View Related
Dec 31, 2011
I want to setup secure Wi-Fi on my Beetel ADSL modem/router. What are the parameters which I need to setup through the modem web interface?
View 1 Replies
View Related
Nov 18, 2012
I cannot open the config page of beetel adsl2 router using 192.168.1.1I have connected my laptop to router via Lan cable. Now when I give the ipconfig, I get some random IP and does not get the default gateway: Autoconfiguration IPv4 Address. . : 169.254.129.188 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . :I cannot ping 192.168.1.1 nor 169.254.129.1 thus the web page of router cannot be opened.This all happened after I reset my router.
View 3 Replies
View Related
Sep 7, 2012
how to change wifi password
View 1 Replies
View Related
Dec 8, 2012
I use Airtel internet and now i will be using MTNL so i will need drivers for my modem to use MTNL so how to find the drivers for my modem?
View 1 Replies
View Related
Jan 27, 2012
I am in a problem, my modem gets hacked everyday, such that many of the sites do not open and only "http://212.113.36.83/" opens instead of sites like yahho.com, sify.com. I checked on internet many people are facing such issue.Only thing I can do to resolve this is to reset my modem, but still this gets hacked even on changing my password.I am not able to understand how is it possible to modify the settings of modem when I have changed the password.Modem Model: Beetel 220BX.
View 5 Replies
View Related
Dec 21, 2011
Im having trouble connecting to my router, everything was working fine till two weeks ago, I have a Vonage D-Link router model: VWR-VD and and have 3 computers, 2 desktops and 1 Laptop. one desktop is connected directly to the router and works fine, the laptop is connected wireless and it works fine too. the other desktop has a Realtek 8185 extensive 802.11 bg wireless devise VEN 10EC / DEV 8185. the computer was working fine till 2 weeks ago that I don't know what happened but now I'm able to see other connections but not my connection (my router). on the task bar when I click on the bars for my connection, my connection does not appear.I've tried the following: Reinstall the Driver reset IP I tried to change the homegroup, but I couldent due to the fact that I'm not connected?
View 8 Replies
View Related
Jan 28, 2013
network conection directly from router is ok but through 24 ports switch i am unable to connect
View 1 Replies
View Related
Jul 15, 2012
I have a sky router (Netgear DG834GT), which i have connected a secound router to which is a D link DIR-615 (with DD wrt firmware D4).I can get access to the sky router remotely without any issues even when changing the port number. its the Dlink router i cannot get access to remotely (within the network i can by typing in the dlink's ip address and works). Main router Sky router IP is 192.168.0.1 - Currently the port number is 8081.Secondary router Dlink IP is 192.168.0.2 (Static ip) - currently the port number is 8080.I have tried to configure the ports but it just dont want to open. Ive tried to open the ports on main netgear and tried all the option my dlink for port forwarding. i must be missing something fundametal here.
View 2 Replies
View Related
Sep 28, 2011
I have to unplug/replug my router powercord connection every time i want to use my laptop to access the internet. i have reinstalled the software disc that came with my router. i have have comcast check my modem-
View 2 Replies
View Related
Jan 15, 2013
Region : Hongkong
Model : TL-MR3020
Hardware Version : Not Clear
Firmware Version :
ISP :
I have installed a mini router type MR3020.I have set it up to WISP mode in order to get wifi signal from my main router and be able to deliver wifi to other devices The main router is working fine and I can access internet with no problem.However, the mini router, which detects the main router, is unable to supply internet connectivity. The ip addresses in teh WAN part under network is zero. Though I tried many times to renew the ip address I was not able to get a valid IP address.
View 2 Replies
View Related
Jun 5, 2012
I have used the WRT54GC (v2.0) router for a few years now, everything worked as smooth as butter, but a few days ago it just stopped detecting the internet connection. Everything works fine with the modem. After resetting the router, I tried to reinstall everything using the setup wizard but at the eleventh step, a pop-up message appears saying that it is "unable to detect the Internet connection" and, like I said previously, the modem works just fine. The username and password for the connection are correct (connection type: PPPoE).
View 4 Replies
View Related
Apr 5, 2011
I have had a problem with my WRT400N wireless Linksys router. Whenever my router restarts or if the DHCP lease expires, I'm unable to connect to internet. During this time I can access the router, but not the internet. Oddly something that seems to "fix" this is if I use my nintendo wii to access my wireless internet at that time, all computers on my network are able to access the internet. However this is annoying to do since this happens once a day from DHCP lease expiring. Using any other computer to attempt to access the internet at this time would be unable to get a connection until I do the "fix" with the Wii. WRT400N
View 8 Replies
View Related
Feb 2, 2007
I'm trying to setup a Linksys wireless-g router model number WRT54G with my DSL connection. I followed the basic instructions that came with the router and towards the end of the process it says detecting network settings with a % bar. The bar fills to 100% and then asks for a password. I've tried the password my DSL company gave me along with various other things like admin etc. After I enter the password I hit enter and it just asks me for the password over and over again.
View 9 Replies
View Related
Jul 17, 2012
I've recently picked up a E4200 to build a dual band network which is targeting to link up (TV, media server, ps3, laptops) then (maintaining phones etc which only has b/g). While currently only laptops.Before doing any of these I have another cisco modem router DPC3825 which worked fine with giving wireless access.I first attemped to leave the modem router has is and connected the E4200 (ethernet 1 to internet), and changed ip to x.x.0.1 and x.x.0.2 while disabling wireless on the dpc3825 and the DCHP on the e4200 and have default gateway to x.x.0.1. My laptops can connect to wireless on E4200 but it couldn't get internet access.
Then I tried turning the modem to bridge mode & resetted E4200 (factory setting x.x.1.1, auto DHCP), and then connected my devices to both wireless bands. At this point I see router status obtained ip from ISP and Internet reached full speed per ISP's mark but the connection only held up for about 1 minutes. I noticed all the devices still maintained connection to router wirelessly but the router loses internet connection (lost the ip and couldn't get it back).
View 4 Replies
View Related
Sep 19, 2012
My EA4500 router seems to drop mine and my wife's iPhone wifi connection at what appears to be the edge of my router's range. When we come back in range, our iPhone's intermittently give the error "Unable to join network.". And we're stuck in that mode. When I check the Devices menu in the CCC interface, I notice the iPhone device is configured and still online. However the "x" box to delete the device is greyed out because it's online. So how do I get out of this state and have my iPhone connect
View 2 Replies
View Related
Jan 22, 2012
Purchased E2500 1 week ago. I do not have a problem communicating with the router itself (either hard wired or wireless) but I have been unable to establish a usable internet connection from the router.I live in building that is wired by Restech Services - Ethernet jack in wall - no modem. Connection works just fine if I bypass router and connect directly to PC (windows XP SP3 desktop or windows 7 laptop.),Very difficult to establish any internet connection at all. I have to renew IP address many times or go through re-boot sequence multiple times. Once I get a connection it is unusable. If I attempt to ping a URL (either from PC or from router admin page) it is unable to resolve host. If I ping an IP directly (either from PC or router administrator page) I typically get 60 to 80% packet loss. As noted, if I bypass router and make internet connection directly to PC - no problems - no packet loss.Used Cisco Connect software to set up. On advice of ISP changed MTU from 1500 to 1300. Also registered MAC id with ISP and changed from cloning PC MAC to using the router MAC. Downloaded and installed latest firmware version. Did factory reset and re-configured the whole thing. Double checked and swapped wiring.
View 5 Replies
View Related
Jan 16, 2011
I have a new PC with Intel DH55HC motherboard and running windows 7 32 bit. I have attempted to install the drivers from Intel and redone the BIOS settings as well. Nothing seems to work.
View 14 Replies
View Related
Nov 28, 2011
I just got a Hauppauge WinTV-HVR850 USB 2.0 TV Tuner, and have been trying to hook up my laptop to the satellite reciever / PVR from Bell. have been unable to get it working. I was'nt sure if this device works with satellite recievers or no ? By the way the laptop has VISTA on it.
View 4 Replies
View Related
Apr 28, 2011
Since successfully restoring my laptop to factory settings I have been unable to connect using my Intel PRO/Wireless 3945ABG Network Connection.Initially it worked, but after a while it stopped. I have completed several system restores, and the wireless connection works for a few days. On the last occasion (after installing windows updates) I received the dreaded blue screen and have been unable to connect.I am not sure if it is related to installing new windows updates as prior to restoring to factory settings I had no issues with my wireless connection.I am able to connect using the ethernet cable and I am currently able to connect using Pluscom wireless usb adapter. [code]
View 14 Replies
View Related
Aug 22, 2011
I have 2 ethernet cards (1 on board & another PCI ), 1 switch & 1 static ip to connet my broadband connection. I connected the broadband cable to onboard ethernet & configured the ip,subnet mask, gateway, DNS1 & DNS2. Internet connection was established. I also established an another cable between PCI ethernet card and switch. I configured the 2nd card to ip 192.168.1.1 . But when I tried to share a connection, my internet stopped to work.
View 1 Replies
View Related
Dec 10, 2011
I have been wanting to share the wifi on my laptop with my desktop. However whenever I enable ICS on my wireless connection and then plug in the ethernet cable to my laptop and my desktop, the wireless automatically turns itself off and only the LAN connection between my laptop and desktop is active. I have done a lot of googling and read a lot of forums, but unable to find a way wherein I can let my wifi remain enabled even after plugging in the LAN cable.
View 5 Replies
View Related
Jun 28, 2011
A week ago I accidently clicked the disable icon on wireless network connection on the bottom right icon on my PC screen. I quickly reversed this but now for some reason, all the wireless networks that are around me cannot be picked up on my Phillips Freevents Windows XP.it was able to pick up two wireless connections and now, not even a trace of one. The other laptops in the house can pick up the wireless connections so I know its working.The internet works when the box is connected to the computer but I need the box in another room so wireless is essential.
View 2 Replies
View Related
Nov 11, 2011
I have 2 laptops both have windows 7 and use usb modem to connect to internet, and use Ad-hoc to share connection on 2nd laptop, usually i share connection from my personal laptop for my other laptop but since past few days i am getting error on my other laptop that window unable to connect to network, I tried making new ad-hoc connections with and without authentication but no luck.. but if i make ad-hoc connection on my other laptop and share it to my personal laptop it works and i am able to connect and browse internet without problem.
View 8 Replies
View Related
Dec 31, 2010
I've been beating my head up over this issue for the last couple days. I have a DLink DGE-530T Gigabit NIC in my computer,which runs through a DGS-2205 Gigabit Switch and the switch is then connected to a DIR-655 Gigabit router. The basic issue is this:
whenever I set the speed of the NIC to "Auto-Negotiate" or "1000Mbps" it will start connecting and disconnecting every few seconds. After a little while on my Windows Server 2003 computer, it will blue screen and say there was a memory parity error and to contact the vendor. On my Windows XP machine with the same NIC, it will just sit there connecting and disconnecting.
View 4 Replies
View Related
Dec 12, 2011
i bought an Apple iMac with Airport (an inbuilt router.) I have a desktop computer (Windows XP) in another room, and also a laptop.I bought a TP-LINK TL-WN721N Wireless USB Adapter. On the Laptop and Desktop, the wireless network is working. My network's name is listed, with full strength. However, when the message Detecting Network Type comes up, the message closes with another message - "Windows is unable to connect to the selected network. The network may no longer be in range.
View 11 Replies
View Related
Jun 15, 2011
when I try to connect to a network where is required a login in the first webpage I cannot have internet access, but only local access.I mean: even for free internet connection, sometimes they require you to connect to their network, then open the browser that is automatically direct to their network login page in order to login in that page.my problem is that I am able to connect to the network but when i open any browser, it does not direct me to the login webpage; it tries to go to my homepage but, obviously, the computer is not still connected to internet, so on the browser it appear "Atheros AR5B91 Wireless Network Adapter".
View 5 Replies
View Related
Jan 12, 2012
I bought a kindle and couldn't get it to connect to wifi. I have a BT homehub 2 and am running xp on my pc. I have now come to the conclusion it was my pc - if I buy a netgear adaptor.
View 8 Replies
View Related
Jan 29, 2011
i have an HP Pavilion a1430n that I've had for a while, so i went to hook it up because i moved and well, i can't seem to get an internet connection. i had this happen at my old place as well, that's where it started, it worked fine one night then just stopped working the next day....I've tried about 15 different things to fix it and it just doesn't work,
View 2 Replies
View Related
