QoS Settings For Beetel 450TC1 Router?
Dec 29, 2011
I am using Beetel 450TC1 router with my MTNL Triband (India) internet connection. The router is connected to my PC through an ethernet port. The other devices (laptops and cell phones) connect to the router through WiFi.As I usually download movies through my PC (connected to ethernet) and it hogs a lot of bandwidth, I want to give my PC (or P2P applications) the lowest priority. Thus, when multiple devices are connected and the PC is downloading a huge file, the other users should not get a poor bandwidth/ speed.I accessed the QoS settings page, but it has a lot of fields and I dont know the meaning of most of them.
View 6 Replies
ADVERTISEMENT
Oct 29, 2012
I have Beetel 450TC1 Wifi router (3 yrs old) and configured with BSNL broadband. The DSL light goes in stable state whenever I took the phone in dialing mode. And internet working well at that time. When I put my phone down, again goes off!
View 1 Replies
View Related
Mar 26, 2012
to configure beetel 450tc1 wifi router with tikona broadband connection.
View 3 Replies
View Related
Sep 7, 2012
how to change wifi password
View 1 Replies
View Related
Dec 8, 2012
I use Airtel internet and now i will be using MTNL so i will need drivers for my modem to use MTNL so how to find the drivers for my modem?
View 1 Replies
View Related
Nov 9, 2011
How to configure wifi adsl 450tc1 router
View 1 Replies
View Related
Nov 2, 2011
I had a Airtel connection with me for which i was provided Beetel 450 BXI ADSL2 + Router to connect to net using wi-fi on my laptop.How ever now i have changed my isp to ortel cable net providers.i access net on my laptop using lan cable connected from cable modem to my laptophow to configure Beetel 450 BXI ADSL2 + Router so that i connect my cable modem to Beetel 450 BXI ADSL2 + Router and access net wi-fi on my laptop. my os is vista.
View 1 Replies
View Related
Jan 1, 2013
I have a Beetel 450BXi modem with is ADSL2+Modem.It was provided by an ISP (ISP-1) however I have changed my ISP (ISP-2) and was using this modem satisfactorily for some time. However due to change in locality, I had to subscribe to a new connection of ISP-2, however the modem is not working even after hard reset.The ISP-2 network guy is not able to figure out the problem. They swapped the modem with their own modem which was working fine, however the beetel modem is not working. In the beetel modem DSL and WLAN links are working perfectly however the Internet link is not working.
View 2 Replies
View Related
Dec 31, 2011
I want to setup secure Wi-Fi on my Beetel ADSL modem/router. What are the parameters which I need to setup through the modem web interface?
View 1 Replies
View Related
Nov 18, 2012
I cannot open the config page of beetel adsl2 router using 192.168.1.1I have connected my laptop to router via Lan cable. Now when I give the ipconfig, I get some random IP and does not get the default gateway: Autoconfiguration IPv4 Address. . : 169.254.129.188 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . :I cannot ping 192.168.1.1 nor 169.254.129.1 thus the web page of router cannot be opened.This all happened after I reset my router.
View 3 Replies
View Related
Nov 24, 2012
I need to change my wifi password in beetel 450tc1.
View 1 Replies
View Related
Jan 27, 2012
I am in a problem, my modem gets hacked everyday, such that many of the sites do not open and only "http://212.113.36.83/" opens instead of sites like yahho.com, sify.com. I checked on internet many people are facing such issue.Only thing I can do to resolve this is to reset my modem, but still this gets hacked even on changing my password.I am not able to understand how is it possible to modify the settings of modem when I have changed the password.Modem Model: Beetel 220BX.
View 5 Replies
View Related
Feb 26, 2013
I'm looking for a good router, home or even Small Business, with good QoS settings. Right now I have the Linksys E3000, but I think I could do better. I want to prioritize VoIP traffic.
View 10 Replies
View Related
Jun 26, 2012
I installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
View 4 Replies
View Related
Dec 25, 2012
When I try to go to192.168.1.1 it says connection interrupted. If i use the Cisco Connect it tells me i am not connected to the internet. My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly. I can go online, I just cant get to the router.
View 9 Replies
View Related
Oct 5, 2012
My internet line is coming directly into HUWAI router and from here its supplying to sonicwall TZ210 WAN port.I have a domain from dyndns.org that is set right now in sonicwall. But when I browse this domain from outsde it opens my HUWAI router login page and I want it to open my SONICWALL login PAGE.
View 2 Replies
View Related
Apr 30, 2011
I have a dlink dap-1360 which my computer technician installed for me earlier this year. i would now like to edit the details such as network name etc.how do i get to the settings page of my router.
View 1 Replies
View Related
May 28, 2012
So I used an Url to acess my router but then, it asked for a username and password. I know I havent messed with it because this is the first time I seen this. I tried leaving the username blank and typing in "admin" for password but nothing worked
View 5 Replies
View Related
Jun 15, 2011
Every so often (random amounts of time) my internet setting either on the router or pc change and then I it comes up with an error that my settings aren't the same as my router... I use a Orange Live box and windows 7. also when I want to sign into games for windows that sometime crashes the internet and on DOW2 and minecraft.
View 10 Replies
View Related
Jan 14, 2012
I used to have Avanti Satellite broadband but then upgraded to new BET technology with BT which allowed people living very far from their exchange to get up to 2mb phone line broadband. With Avanti, I could access my Buffalo routers settings by just typing in the routers ip.But, now with the new BT Hub we got, whenever I type in ipconfig to cmd, the gateway address is the address to access the settings of the hub. I tried the old bufallo ip but it is not working. I think this is because the hub is a router aswell. Is there anyway I can access the routers settings?
View 13 Replies
View Related
Jan 5, 2012
Im using my cousins internet because Im staying at her house for the hollidays and when I try to connect to her internet I get the message - Limited connectivity or no internet connection. I've tried to access the router settings but nothing will work, I've then tried to put the cable directly into my laptop and type the default ip adress into the address bar but still nothing
View 2 Replies
View Related
Sep 25, 2012
I just say that I'm not brilliant with pcs but I'm able to follow instructions if they are in the consistency of baby food! XD..Well basically I can't access my wireless modem router's settings (2 in 1 device I believe). I managed it once but haven't been able to do it again. I've tried the following:
-Reset router many times.
-Turn it on and off many times.
-reset router while ethernet cable is connected and without.
-ipconfig/release and renew
notthing works!!! I noticed the ip address changed from the default one of 192.168.2.1 to a completely different one...95.175.138.When I turned on my laptop today after being off overnight (and the router) somehow I did managed to get on the settings page again using 192.168.2.1 but didn't last for long. While I did this there was a warning icon next to the wifi icon, but then when the warning sign went off that's when the router's setting page stoped working again.I need to get to the router setting because currently is set to go off when i turn off my laptop which is a bit pointless and change a password.
View 14 Replies
View Related
Mar 5, 2013
I can't get into my router's settings, when I try, chrome says the page is not available. I checked, the IP is correct, and I can't access it on multiple computersI recently changed a few setting. (I set it to max 300 mbs per second from 54, and one other thing that I don't recall) The problem occurs on three different computers(A mac and two PCs) I've restarted my router several times to no avail. What should I do?
View 1 Replies
View Related
May 13, 2012
I am having a problem accessing my router settings page. everything was working fine and then all of a sudden my desktop couldn't get internet but all the laptops could so I tried everything power cycling the everything changing the Ethernet cable and I got nothing. So then I hard reset my router and erased all the settings and now it works so I have internet just fine and right away after I hard reset I could access my router settings page and input all of my settings like DNS servers and port forwarding and changing my SSID etc. but now every time I try and go to it it just won't I don't even get the login prompt nothing. So why I can't access this page. Here is a copy of my ipconfig /all. Also when I ping 192.168.0.1 I have no packet loss.
Edit:I have gotten it to work in IE I have to go to HTTPS://192.168.0.1 and then click go to site anyways after it gives me a warning about the certificate being invalid and I have to allow it or whatever otherwise it won't bring up the login prompt. Also the same thing is happening for FF so I need to go to https://192.168.0.1 and click I understand the risks and add exception for it to work.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Andrew-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
View 2 Replies
View Related
Apr 24, 2012
time capsule can be the same as the router settings?
View 1 Replies
View Related
Mar 3, 2013
me and my co-worker bought an xbox and we can connect online but we have no open NAT. I asked the manager if I could take a look and set it, he said that'd be fine but there's one problem; it's seperated by sheet rock in the cieling. I asked if I could take a look on the lobby PC and try to access it there and he said it'd be fine, he understands that I'm not tampering with anything other than just turning the NAT on, he's been trying to access it himself. I went to the cmd prompt and did ipconfig /all, got the default gateway ip and typed it in, but there are no settings just a display from air2data.I can't reset the router.
View 1 Replies
View Related
Mar 3, 2013
I currently have a pc, iMac, PS3, a win7 laptop, 3 phones in the household.Till very recently i have been using a dlink dir615 wireless router as i had a wimax connection.I have changed ISPs and now have to get internet through a ADSL modem..i have just bought a Dlink N300 ADSL2+ modem...i need to have all settings exactly the same (or with minimum hassles) to change over the connections.getting all the devices to handshake on the network especially the mac and pc was not the easiest thing so i don't really fancy doing it again...
View 14 Replies
View Related
May 1, 2012
My internet has been very sluggish so after reading the thread about Router security and neighbors who might be stealing my internet connection via WIFI, I decided to check what kind of security I had. Turns out I have WPA and no unknown devices were connected at that time. Would like to get an email whenever a NEW device logs in...if that is possible. But while I was in there "futzing around" I did something terribly wrong. I followed all of these steps. Then I noticed that the router speed section had me listed at 145mbps. I had recently changed cable companies to one that provided faster interenet. So I figured I would bump that up to 300 mbps. I can no longer access any of my router settings. What did I do, and how can I undo it?
View 4 Replies
View Related
Mar 6, 2013
I have 3com router and it is working fine. The issue is that when I am taking the router out of the electricity and reenter it back it will not save my settings and I will have to log in again to change the settings.
View 1 Replies
View Related
Jul 20, 2011
why I can't save any router settings? I get a momentary disconnect followed by a brief redirect message and then I get kicked back to the router log on page.
View 3 Replies
View Related
May 14, 2012
I have a Belkin Wireless G Router. Whenever I set up a wireless password and network name, within a few hours, the router resets its self to its factory settings. The router will not let me maintain a secure network because of this. How do I make it so that all the settings that I set will stick?
View 2 Replies
View Related
Jul 29, 2012
I am trying to change the name of my wireless network but when I go to the 192.168.1.1 and type in my password, it just goes to a blank screen. I've accessed my router a lot of times before this way. It is a lisksys router.
View 1 Replies
View Related
Aug 21, 2011
My 7 month old Netgear wireless router suddenly stopped working
The router's power light will not remain on after powering it up. The only lights that remain on after power-up are the (4) "LAN Port" lights (solid green) and the "Internet" light (solid amber).
The owner's manual states that it's a hardware problem if the power light does not remain on and to call tech support. The tech I spoke too said it's a settings issue that they deal with everyday and not a hardware problem.
One of the things I've tried was using a paper clip to reset the router to it's factory settings. It didn't change anything though. Re-running the setup CD didn't yield any results either. It just stopped in the middle because it said there was no ethernet cable connecting the laptop to the router, even though there was.
By the way... My ISP is Century Link and I use an Actiontec DSL Modem.
Not sure how to modify the router's settings if the network is down.
View 3 Replies
View Related
