I currently have a pc, iMac, PS3, a win7 laptop, 3 phones in the household.Till very recently i have been using a dlink dir615 wireless router as i had a wimax connection.I have changed ISPs and now have to get internet through a ADSL modem..i have just bought a Dlink N300 ADSL2+ modem...i need to have all settings exactly the same (or with minimum hassles) to change over the connections.getting all the devices to handshake on the network especially the mac and pc was not the easiest thing so i don't really fancy doing it again...
Got a Belkin wireless modem router some 18 monthes ago, and after a bit of a struggle managed to set it up. It worked fine, aside from the odd depower repower. For some reason, it just stopped working yesterday. I initially checked all my cabling etc and everything seems fine. I next tried resetting my modem/router to factory settings. When I tried to install the Belkin software I fell at the first hurdle with a message saying "The setup assistant is not able to connect to the router". After googling my issue, I followed others advice and running the cmd setting and typing in "ipconfig" only to find that my media state was disconnected.
I've a Shiro DSL805E Modem and to connect to multiple computers, I connected an Encore 5 Port Switch. Now I got laptop and thought of getting a wireless network, so I bought TP-Link TL-MR3420 Wireless Router and connected it to the one of the wires from the Encore Switch. But I'm unable to access the internet through TP-Link Router but the internet works fine for the computers which are directly connected to switch. how to do ip settings for TP-Link Router. But when I connect router directly to modem by bypassing switch, it works fine but not via switch. I have some restrictions due to which I have to strictly following this sort of connection: Modem -Switch - Router
I am very new to port forwarding and firewall issues. I have been told that the software issue that I have probably is a router/modem issue as every other possibility has been ruled out. I have a Westell 7500 modem. How do I access, set or change settings on it? And, which is the better modem, a Westell 7500 or a Westell 327W??
We have a Comcast business class cable modem with a static IP address. There are two devices hardwired to it; a server and a Linksys WRT610N, The server is hardwired to it with port forwarding set for ports 21, 80 and 5900. It works perfectly and can be reached as intended by the outside world but not by our own network. Our Linksys WRT610N is hardwired to the modem. All computers on the wireless network see each other and can access the internet perfectly. So all seems well enough. BUT, no computer on our network can reach our server. Using the domain name or VNC connections from inside our system results in time outs and no connection.
Comcast service went down in our neighborhood and when it came back up my internet was down and all five LED lights on my Linksys router are solid green. Tech support tells me that I have to reset the unit to get it to function again.It's been a very long time since I set up the home network and while I'm pretty sure I can make my way through setting up from scratch (I'm assuming resetting goes back to factory settings) I was hoping there was a way to reconnect the router to the modem while retaining all the current security and settings.
I have RS232 GSM/GPRS modem SIM900,by using this i can send/receive messages, make call.But now my Query is "By using this modem can i able to transfer files between two systems which are located at diffenent places",it is possible or not?
So I have a really neat computer sitting here, 2500K, P8z68-v, samsung 830 64gb ssd, corsair vengeance 16gb, deskstar hdd, firepro v5800
I have a non-descript trendnet 56K v.92 dial up modem installed to pci slot1 on my mobo.The phone company says they can't get a quicker connection than 31.2 Kbps established to dial up users in this area.The real issue is the data transfer rate.I have seen it reach as high as 6.xx Kbps but generally hovers around 2.5 Kbps.Now it is down to 1.xx Kbps and I took the last 48 hours downloading all the updates for windows and several other updates for hard ware etc.Now I need the ATI firepro update and 114 Mb will take over 16 hours at my average speed, and some 32 hours at the new slower speed
I forgot password for my modem settings. I changed the default 'admin' 'password' for security reasons but now I forgot it.Without it I couldn't even change WEP Key to connect wireless. I'm using Compex WRL254G All in One Router/Modem.
i just recently upgraded to Road Runner Extreme which Uses DOCSIS 3.0 SBG6580 Modem and i was wondering what internal settings i should use to maximize my speeds and online gameplay. I'm running a Ethernet line into my Xbox360 and wireless for my laptop. Also, i was told that Road Runner Extreme would get me 35Mbps downstream and 5Mbps Upstream, yet these are the speed test's i'm getting [URL]
I try to change modem speed from 1200 to 19200 on aux 0 interface.But I can't save the settings using "write memory" In show running-config, I can see modem speed successfully changed.
Cisco3825's OS information is here. c3825-spservicesk9-mz.124-25b.bin
I had an WRVS4400 (but didn't use the wireless), it it died. I'm replacing with an RVS4000. I have all the settings from the prior router, but my question has to do with the DSL modem in use in conjunction with the router, because (in my absence) my wife had a conversation with SBC, trying to use the hook to the modem directly and ended up altering settings on the modem that may affect the RVS4000 when I go to install it upon its receipt from Amazon tomorrow.
We have a business that uses a third party software vendor's website; their servers access our data on our server behind the router. So we use a static IP address, and port forwarding. No problem there. But I could have sworn that, with the WRVS4400 we used to have the modem configured as bridged; as of this morning, the modem shows PPPoE, and my wife can't recall what SBC had her do in that regard!
So, for the situation I've described, should I put the modem into bridge mode (and porting it into the RVS4000). Like I said, we have a static WAN IP address, and a range of more static IP addresses.
Recently switched DSL providers and now have Cisco modem DPC3008. Able to connect to internet directly thru modem. Able to connect wired or wireless to router. Unable to get router to connect to internet via modem. Tried restart, reset, and new set-up. Called ISP (Charter) - no way, said contact Belkin.
My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI: VCI: These 2 already came with presets. Should I just leave them? Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
My transfer speed from HDD which connected to linksys e4200 reach max 2,3MB/s how it is possible to watch fullHD movie if its required minimum 5MB/s? Maybe I should make some adjustments? HDD-WD My Passport 750Gb Also connection speed max reach 144mb/s?? how to make 300mb/s ? wifi adapter is Intel advanced N + WiMax 6250 AGN last driver installed, also E4200 last firmware installed 1.0.0.2 all settings by default Max download speed 75Mb/s by utorrent but provider gives 100Mb/s By cable its ok, max speed 100Mb/s as giving provider
Very slow transfer speeds problem with this router. When I put the router in the system, my transfer speeds drop from 12 Mbps to 3 Mbps. I've updated the firmware to the latest version but that doesn't work. The most frequent suggestion is to upgrade the firmware which I have already done.
My XBOX started complaining when I began using Windows Media Center to stream videos from my PC to my XBOX. I found out that I had a wireless G router provided by verizon which wasn't fast enough to stream videos. SO, I went out and purchased a 4500EA router expecting it to be the fastest thing I had ever seen.
Now it seems a bit slow when trying to stream video from my laptop to the XBOX and i'm a tad bit confused as to why. So I did a file transfer from a desktop wired directly to the router from a laptop in the same room wirelessly connected to the network and my speed is about 4mbps. 4MBPS!? This device is supposed to be capable of moving packets LAN side at 450MBPS.
Both of my PC's are quad core, newer model PCs. I've tried moving files now for several hours with the same results. I've toyed around with my wireless adapters, changed power settings, full duplex, half, changed mtu sizes, changed security settings. I'm out of ideas.
Is getting about 1% of the advertised bandwidth normal?
I have a home network running on a Linksys WAG320n and i have attached to it a WD MyBookLive (w Gigabit Ethernet). I am connected on the network via my Dell with a Intel(R) WiFi Link 5300 AGN. I am not able though to connect on N range. I have installed the latest drivers from Intel but nothing changed. When i try to copy a file from my computer to the WD Network drive the transfer rates are very slow. I get Max 2MB/s - 3MB/s while if i connect my computer with a wire the speed goes up by 3-4 times more.
I am trying to FTP a 25MB file to a client using FileZilla and my wired WRT310N router. In the past I have never had a problem but now I am getting the following error: Could not write to transfer socket: EPIPE - Local endpoint has been closed.I changed the MTU to manual - 1500 on the router.I am using an almost brand new iMacThe iMac firewall is OFFTimeout in Filezilla is set to 0.The transfer stops at about 12MB everytime I try; which is ~ 35 seconds.
E4200 with an external hard drive WD My Book (1TB) connected to the router via USB.Desktop PC (Windows 7) connected to router via Ethernet cable.Laptop PC (Windows 7) connected to router via wireless connection.I wanted to create a central media (videos/pictures) file on the external hard drive connected to the router. However, the transfer rate is terribly slow. Interestingly, it is 50KB/second when copying from the Desktop (via Ethernet) and 1.6Mbps when copying from the Laptop via wireless.
My E3200 is set up with no encyrption/ security. The 5GHZ band is set to wireless N, channel width is set to Auto (20 or 40) channel is also set to auto. I have my 2 laptops connected on the 5GHZ band and both have excellent connection with 300mbps. I'm transfering some files between the 2 and an only getting 7MB (so ~56mbps). Both laptops are running windows 7 ultimate.
I've tried transfering music, videos, and some ISO's.
just bought a WD my book world edition 2 NAS and have been trying to tranfer files wirelessly to it but a 700mb file is taking 25mins to trans. my book is connected by ethernet to netgear dgnd3300 router and my laptop has sitecom 300n usb doongle.is there some sort of setting i've missed or is this speed normal?
I recently got a ea4500, wireless working fine, can connect to the usb storage from different devices fine, but when i try and copy a file to the usb storage, it initially looks like its transferring and registers a file in the usb storage folder. but when i access the usb storage from other devices i cannot find or access the files that i transferred?
I am seeing something pretty bizarre: when trying to copy files between two computers (both Windows 7 SP1 64bit), both physically plugged into the back of the E4200, I see extremely slow transfer speeds: 1.0-1.1 MB/sec. Both computers are fast (i7-2600K, both using SSDs) and both have gigabit ports (and the 4200's web UI shows both ports in question as operating in gigabit mode).
This is so slow as to be sort of funny. Each of these computers see speeds well in excess of that when transferring between the computer and outside internet sites...so it's kind of funny that two computers plugged into the same switch in the back of the 4200 see 1 MB/second.
I just bought a synology NAS ds212j . I updated to DSM4.0. I purchased 2 Seagate ST2000DM001 Barracuda 7200RPM 2 TB SATA 6 GB/s NCQ 64 MB Cache 3.5-Inch Internal Bare Drive
My e3200 has the latest 1.0.04 firmware I'm backing up via time machine(mac book pro) in MAC 10.7.4 which has a wireless N card.
in Utilities (activity monitor)I'm only getting 9 megabytes per second , why is it so slow? I feel like it's taking forever. e3200 says it does up to 300 megabytes per second. any possible settings causing this?
a backup of 202 gigs has been running for about 4 hours and still going
This is another E3000 "connection drops" thread. Some background: I have two E3000's that are cascaded. The main router is in my basement connected to my cable modem and is my DHCP server. The second one is on the main floor and provides my wireless signal (no DHCP, and is hard connected to the main router).I have lots of connection drops with the wireless router on the main floor. Lately I have noticed a trend, though. My connection drops mostly when I browse my network (usually browsing pictures on another computer) or when large files or videos are being transferred. If I connect a cable, I have no problems. When wireless, I have signal drops.I have tried every trick and tip that I've seen on this forum or been provided in the Linksys FAQ. I've changed the beacon interval, fragmentation threshold to 2306 and CTS to 2307, I've tried changing channels, I've checked and unchecked boxes for NAT, Filters, etc. I've tried different combinations of WPA2 passwords. I've tried dynamic routing, static routing, blah blah blah...
When I set the 5Ghz channel to Auto(DFS) it defaults to channel 36 and 144Mbps. When I use other channels, I get 300Mbps. Either way, my connections still drops.
I have the latest firmware 1.0.04 Build 6.I even have the router sitting on top of a laptop cooling pad to keep it cool.No matter what I do, as soon as I start browsing my network the wireless connection drops.I am so frustrated! I upgraded my WRT-160N to this E-300 router to get the faster speed and dual band but have had nothing but trouble. I never had a connection drop with my 160N.
EDIT: I notice that when my signal drops, I can see the power LED blinking on the router, like it's going through a reboot cycle.
I have 8mbs down/1 mbs up service through a cable modem (WOW). We've been using a WRT320N wireless router with great success. I haven't checked true transfer rates, but when I do a speed test (url...), I pretty consistently get the speeds we are paying for. There's a room I wanted to use as an office but the signal didn't reach there. I just set up a WRE54G range expander. It is talking to the router and my compter. I have internet access but the speeds are considerably slower (<1mbs down/<0.4 mbs up) than what I get on the other computer that's talking directly to the router. I've looked for specs on data rates on the WRE54G and can't find them, but I can't image they're that slow. Can this be because I'm using a G expander with an N router?
i have a newly formatted (i.e. empty) 2TB WD my book elite which when i connect it to my computers usb port, can transfer a 6gb video file at over 100MB/s according to the win 7 detail box. However, when i connect it to the usb port on the back of the e4200 and try to transfer the same file, it only goes at 8MB/s max ... it appears to be going at usb 1 speed. i've got the latest firmware on both the e4200 and the my book 1111 and everything seems to be working fine for both, except this transfer rate when connected to the e4200.granted, cisco doesn't specifically list this drive as being tested, but the router does recognize it and shows it as usb 2.0, but yet the transfer speed is just too slow.8MB/s is just not workable...i could just connect the drive directly to the computer and share it that way, but connecting it to the e4200 was one of the reasons i bought the e4200.
