Wireless N Router / 300 Mbit Transfer Per Connection Or Total?

Jul 29, 2011

I was wondering if I had a Wireless N router, can it do 300Mbit per connection, or can it do 300Mbit transfer across all connections?

View 8 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT54G Receiving High Latency Spikes And Total Connection Loss

Mar 10, 2011

Product: Linksys Wireless-G Broadband Router WRT54G
Version: 6
Firmware: Has Been Updated

I am directly connected to my router. Lately, I have been receiving high latency spikes and total loss of internet. The problem must be related to my router, because when I connect to the internet through my modem I don't have this problem.

View 9 Replies View Related

Dell :: Studio 1555 - WL-351 Connection Speed Wired 98 Mbit But Wireless 12Mbit

Dec 25, 2011

Computer: Laptop Dell Studio 1555 Dual Core:  W 7 64 bit, router Sitecom WL-351. Max. connection 120 Mbit.  Speed normally approx 100 Mbiton the Dell  desktops. Connection speed on the Laptop Studio used to be 60 Mbit wireless . Haven’t checked speed for many week but yesterday foundout that the speed  dropped to 12 MB. Wired the laptop to the router, connection wend up to 98 Mbit.

Wireless again the speed dropped to 12 MBit.  Checked the wireless connection with another laptop and it went up again to 70 Mbit. What could be wrong on the Studio 1555?

Cleaned the computer, no malware, Mode AP, Channel 11, WPA2

The card Broadcom driver 10-01-2008, version 5.30.21.0

The card works but the 12 Mbit should be at least 60 Mbit.

View 6 Replies View Related

Linksys Wireless Router :: EA4500 - Internet Port Speed Is Only 10/100 Mbit?

May 8, 2012

In 'Status' on my router there is a green dot in the field below 10/100 mbps at 'Internet port speed' - shouldn' that dot be below 1 gbps?

View 1 Replies View Related

D-Link DIR-601 :: Router To Communicate Wirelessly At Only 1 Or 2 Mbit / Sec?

Dec 28, 2010

Any way to force the router to communicate wirelessly at only 1 or 2 Mbit/sec?  I am having trouble connecting to another device, not made by Dlink, and their technical support suggested testing at a lower data rate. 

View 1 Replies View Related

Linksys Wireless Router :: Intel 4965agn Client With E4200 - Good Connection / Transfer Rate?

Jul 30, 2011

Which Intel network cards runs well with E4200 (latest FW)?  I mean good connection and transfers rate.  I have two clients with the same cards (Intel 4965agn, latest driver) and I got transfer rates at 144 Mbps with both radios working (2.4 and 5GHZ on the E4200). When I try to use 5Ghz only it drops to 54 Mbps and for 2.4Ghz it drops for 130 Mbps. Could I reach better transfers rate with a Intel 4965agn card (300 or 450 Mbps)?

View 4 Replies View Related

Linksys Wireless Router :: WRT610N Can Set Up Airport Express On A Total Different Frequency

Dec 9, 2011

When it comes to networking and require some advice on setting up my wrt61on router with my airport express. I have managed to get it all connected up and working but am suffering frequent dropouts while streaming music. I have done a little reading and have tried changing a few settings on the router but have found no improvement. My set up is as follows.
 
-Modem connected to WRT610N Router
-Desktop Computer connected to network via wusb600N dongle
-Airport Express connected via wif
-Using Iphone 4 as remote
 
Is there a way where i can set up the airport express on a total different frequency to everything else in the house i.e laptops iphones etc to prevent these cutouts.

View 1 Replies View Related

Cisco Wireless :: Only 5.5 Mbit With Aironet 2600 AP

Apr 16, 2013

we have some (2) HP Notebooks with a Broadcon 4313 b/g/n WLAN Chip and use the latest drivers (2012). This Chip can provide up to 72 mbit/s with 2,4 ghz.
 
If we connect this notebooks to a Aironet 2600 AP (10 feet distance) the Windows 7 WLAN Dialog shows 72 Mbit/s for 3 seconds and than only 5.5 Mbit. Others (newer) Laptops show 450 Mbit. The WLAN works with WPA2/AES and PSK. The speed doesn't go up, if we copy a big file to the laptop.
 
Here is the Linktest from the AP to Client (from the WLC 2504 Webinterface):

View 12 Replies View Related

Slow File Transfer Over Local Wireless Connection?

Nov 7, 2011

I am having incredibly slow connection while transferring files using file sharing.I have the below hardware:

108Mbps TPLINK Wireless Router
TL-WR642G 108Mbps TPLINK Wireless Access Point acting as repeater
Laptops accessing internet and folder sharing enabled for local file transfer

Transfering of files excessively slow (after playing around with the settings was able to get 500KBps). I have set all wireless adapters on the laptops to 802.11g only.Tried setting the router and access point to both 54Mbps and 108Mbps 802.11G only as well as b/g.

View 1 Replies View Related

TG-3269 - Getting Only 100 Mbit/s From Gigabit Ethernet Card

Dec 17, 2012

I have the following problem. I bought two TP-LINK TG-3269 gigabit cards, placed them in two computers and connected them directly. On my Ubuntu system I used iperf tool and measured only 95 Mbit/s. It wont go any faster, I tried many times with different settings.

The indicator lamp shows 1000 Mbit/s.

View 5 Replies View Related

Cisco Wireless :: Mass 10 Total Units Failed In Groups Of 2-4 With AIR-LAP1131 / POE

Apr 16, 2013

We had several AIR-LAP1131AG-N-K9 devices have a peculiar failure recently.About 10 total units failed in groups of 2-4. Each group was on the same 3560 switch, and they failed at the same time.Now all but one of the units will power and work properly with an inline power injector. But they are either intermittent or not at all when connected to the POE Switch. Even when I use a 3ft patch cable to connect directly to the switch. I have certified the cable and they do the same no matter which port or cable used. 'show inline power' command will show these failed units as 'Iee PD'v

View 1 Replies View Related

Cisco Switching/Routing :: 2811 With AIM-SSL2 Produces 100% CPU Load At Only 4 Mbit

Jan 15, 2012

We are using a few Cisco2811's with the AIM-SSL2 hardware encryption module in a private WAN. This WAN is ethernet based and uses private address space.To add security, we are using cisco group-VPN with AES-128 encryption. The IOS version is advanced ip services.Routing is done with OSPF. According several sources on the cisco site this hardware combination should be able to handle a throughput of 30 -90 Mbit/s.In effect, we see that the CPU uses 60% at 2 Mbit/s load and almost flatlines at 100% on 4 Mbit/s load.With a 'show proc cpu' however the biggest individual process uses only 1,5%.The testscenario at which the 30 - 90 Mbit/s load get reached is a point-to-point Ipsec solution encrypted at 3DES.

View 15 Replies View Related

Transfer Files Between Two PCs By Wireless Without Router Or Access Point?

Jul 6, 2011

Can i transfer files between two pc's just by wireless without a router or access point.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Slow Transfer Speed From Usb HDD?

Jun 29, 2011

My transfer speed from HDD which connected to linksys e4200 reach max 2,3MB/s how it is possible to watch fullHD movie if its required minimum 5MB/s? Maybe I should make some adjustments? HDD-WD My Passport 750Gb Also connection speed max reach 144mb/s?? how to make 300mb/s ? wifi adapter is Intel advanced N + WiMax 6250 AGN last driver installed, also E4200 last firmware installed 1.0.0.2 all settings by default Max download speed 75Mb/s by utorrent but provider gives 100Mb/s By cable its ok, max speed 100Mb/s as giving provider

View 9 Replies View Related

Linksys Wireless Router :: 4500EA LAN File Transfer Speed?

May 6, 2012

My XBOX started complaining when I began using Windows Media Center to stream videos from my PC to my XBOX. I found out that I had a wireless G router provided by verizon which wasn't fast enough to stream videos. SO, I went out and purchased a 4500EA router expecting it to be the fastest thing I had ever seen.
 
Now it seems a bit slow when trying to stream video from my laptop to the XBOX and i'm a tad bit confused as to why. So I did a file transfer from a desktop wired directly to the router from a laptop in the same room wirelessly connected to the network and my speed is about 4mbps. 4MBPS!? This device is supposed to be capable of moving packets LAN side at 450MBPS.
 
Both of my PC's are quad core, newer  model PCs. I've tried moving files now for several hours with the same results. I've toyed around with my wireless adapters, changed power settings, full duplex, half, changed mtu sizes, changed security settings. I'm out of ideas.
 
Is getting about 1% of the advertised bandwidth normal?

View 2 Replies View Related

Linksys Wireless Router :: WAG320n Slow Transfer Rate

Dec 27, 2012

I have a home network running on a Linksys WAG320n and i have attached to it a WD MyBookLive (w Gigabit Ethernet). I am connected on the network via my Dell with a Intel(R) WiFi Link 5300 AGN. I am not able though to connect on N range. I have installed the latest drivers from Intel but nothing changed. When i try to copy a file from my computer to the WD Network drive the transfer rates are very slow. I get Max 2MB/s - 3MB/s while if i connect my computer with a wire the speed goes up by 3-4 times more.

View 5 Replies View Related

Linksys Wireless Router :: WRT310N Could Not Write To Transfer Socket

Sep 28, 2011

I am trying to FTP a 25MB file to a client using FileZilla and my wired WRT310N router. In the past I have never had a problem but now I am getting the following error: Could not write to transfer socket: EPIPE - Local endpoint has been closed.I changed the MTU to manual - 1500 on the router.I am using an almost brand new iMacThe iMac firewall is OFFTimeout in Filezilla is set to 0.The transfer stops at about 12MB everytime I try; which is ~ 35 seconds.

View 6 Replies View Related

Linksys Wireless Router :: E4200 Slow Transfer Rates

May 21, 2011

E4200 with an external hard drive WD My Book (1TB) connected to the router via USB.Desktop PC (Windows 7) connected to router via Ethernet cable.Laptop PC (Windows 7) connected to router via wireless connection.I wanted to create a central media (videos/pictures) file on the external hard drive connected to the router.  However, the transfer rate is terribly slow.  Interestingly, it is 50KB/second when copying from the Desktop (via Ethernet) and 1.6Mbps when copying from the Laptop via wireless.

View 9 Replies View Related

Linksys Wireless Router :: Optimize E3200 Transfer Speeds?

Jan 11, 2012

My E3200 is set up with no encyrption/ security.  The 5GHZ band is set to wireless N, channel width is set to Auto (20 or 40) channel is also set to auto.  I have my 2 laptops connected on the 5GHZ band and both have excellent connection with 300mbps.  I'm transfering some files between the 2 and an only getting 7MB (so ~56mbps).  Both laptops are running windows 7 ultimate.
 
I've tried transfering music, videos, and some ISO's.

View 5 Replies View Related

Linksys Wireless Router :: Slow Wireless Transfer Speeds / Wrt160n V3

Jul 21, 2011

I have a home network with a media center.  I have the hauppauge 1212 HD pvr so that I can record video in HD to my hard drive.  I want to stream this content to the differnet PCs on my home network.  Every TV in my home I have hooked an HTPC to it.  I use them to play dvd's.  Stream netflixs etc. My problem is that I am getting a terrible transer rate wirelessly.  600 -750 kbps.  (tested by transfering large files from pc to pc)  All computers have 300Mbps wireless n cards.  all are recieving max signals.  There are either 3 or 4 pc's connected at a time depending on whether my laptop is connected or not.  Obviously this is way to slow to stream video. Made sure my network name is unique.  changed to wireless channel 1 I do think I have WEP 64bit encription could this be an issue?

View 7 Replies View Related

Cisco :: OID To Show Total MAC Addresses In Use On 6509

Jul 28, 2011

How to identify the OID to show the “total MAC Addresses In Use” on a 6509, This is the value we can see from a show mac-address counters, and I want our Solarwinds system to poll for it.

View 1 Replies View Related

Netgear Dgnd3300 Router - Wireless Network Slow File Transfer

Feb 10, 2011

just bought a WD my book world edition 2 NAS and have been trying to tranfer files wirelessly to it but a 700mb file is taking 25mins to trans. my book is connected by ethernet to netgear dgnd3300 router and my laptop has sitecom 300n usb doongle.is there some sort of setting i've missed or is this speed normal?

View 5 Replies View Related

Linksys Wireless Router :: EA4500 Unable To Transfer Files To USB Storage

Jan 2, 2013

I recently got a ea4500, wireless working fine, can connect to the usb storage from different devices fine, but when i try and copy a file to the usb storage, it initially looks like its transferring and registers a file in the usb storage folder. but when i access the usb storage from other devices i cannot find or access the files that i transferred?

View 5 Replies View Related

Linksys Wireless Router :: E4200 - Incredibly Slow Transfer Speeds?

Oct 18, 2011

Using 1.0.03.
 
I am seeing something pretty bizarre: when trying to copy files between two computers (both Windows 7 SP1 64bit), both physically plugged into the back of the E4200, I see extremely slow transfer speeds: 1.0-1.1 MB/sec.  Both computers are fast (i7-2600K, both using SSDs) and both have gigabit ports (and the 4200's web UI shows both ports in question as operating in gigabit mode).
 
This is so slow as to be sort of funny.  Each of these computers see speeds well in excess of that when transferring between the computer and outside internet sites...so it's kind of funny that two computers plugged into the same switch in the back of the 4200 see 1 MB/second.  

View 6 Replies View Related

Linksys Wireless Router :: E3200 Slow Transfer Rate To Synology NAS

Jun 20, 2012

I just bought a synology NAS ds212j .  I updated to DSM4.0. I purchased 2 Seagate ST2000DM001 Barracuda 7200RPM 2 TB SATA 6 GB/s NCQ 64 MB Cache 3.5-Inch Internal Bare Drive
 
My e3200 has the latest 1.0.04 firmware I'm backing up via time machine(mac book pro) in MAC 10.7.4 which has a wireless N card.
 
in Utilities (activity monitor)I'm only getting 9 megabytes per second , why is it so slow? I feel like it's taking forever. e3200 says it does up to 300 megabytes per second. any possible settings causing this?
 
a backup of 202 gigs has been running for about 4 hours and still going

View 9 Replies View Related

Linksys Wireless Router :: E3000 Wifi Drops During File Transfer?

Nov 3, 2012

This is another E3000 "connection drops" thread. Some background: I have two E3000's that are cascaded. The main router is in my basement connected to my cable modem and is my DHCP server. The second one is on the main floor and provides my wireless signal (no DHCP, and is hard connected to the main router).I have lots of connection drops with the wireless router on the main floor. Lately I have noticed a trend, though. My connection drops mostly when I browse my network (usually browsing pictures on another computer) or when large files or videos are being transferred. If I connect a cable, I have no problems. When wireless, I have signal drops.I have tried every trick and tip that I've seen on this forum or been provided in the Linksys FAQ. I've changed the beacon interval, fragmentation threshold to 2306 and CTS to 2307, I've tried changing channels, I've checked and unchecked boxes for NAT, Filters, etc. I've tried different combinations of WPA2 passwords. I've tried dynamic routing, static routing, blah blah blah...
 
When I set the 5Ghz channel to Auto(DFS) it defaults to channel 36 and 144Mbps. When I use other channels, I get 300Mbps. Either way, my connections still drops.
 
I have the latest firmware 1.0.04 Build 6.I even have the router sitting on top of a laptop cooling pad to keep it cool.No matter what I do, as soon as I start browsing my network the wireless connection drops.I am so frustrated! I upgraded my WRT-160N to this E-300 router to get the faster speed and dual band but have had nothing but trouble. I never had a connection drop with my 160N.
 
EDIT: I notice that when my signal drops, I can see the power LED blinking on the router, like it's going through a reboot cycle.

View 9 Replies View Related

Linksys Wireless Router :: WRT320N - Slow Transfer Through Range Extender

Aug 26, 2011

I have 8mbs down/1 mbs up service through a cable modem (WOW).  We've been using a WRT320N wireless router with great success.  I haven't checked true transfer rates, but when I do a speed test (url...), I pretty consistently get the speeds we are paying for.  There's a room I wanted to use as an office but the signal didn't reach there.  I just set up a WRE54G range expander.  It is talking to the router and my compter.  I have internet access but the speeds are considerably slower (<1mbs down/<0.4 mbs up) than what I get on the other computer that's talking directly to the router.  I've looked for specs on data rates on the WRE54G and can't find them, but I can't image they're that slow.  Can this be because I'm using a G expander with an N router?

View 1 Replies View Related

Linksys Wireless Router :: E4200 1.0.03 Slow Usb Storage Transfer Speed?

Nov 20, 2011

i have a newly formatted (i.e. empty) 2TB WD my book elite which when i connect it to my computers usb port, can transfer a 6gb video file at over 100MB/s according to the win 7 detail box. However, when i connect it to the usb port on the back of the e4200 and try to transfer the same file, it only goes at 8MB/s max ... it appears to be going at usb 1 speed.  i've got the latest firmware on both the e4200 and the my book 1111 and everything seems to be working fine for both, except this transfer rate when connected to the e4200.granted, cisco doesn't specifically list this drive as being tested, but the router does recognize it and shows it as usb 2.0, but yet the transfer speed is just too slow.8MB/s is just not workable...i could just connect the drive directly to the computer and share it that way, but connecting it to the e4200 was one of the reasons i bought the e4200.

View 8 Replies View Related

Linksys Wireless Router :: E3000 Slow Network Transfer Speeds Over N

Jul 11, 2011

I'm having very slow file transfer speeds between the 2 computers on my network. One is a gigabit pc wired (cat6) to the e3000. The other is a wireless N laptop. Both computers running Win7. Speeds are like 1.5 - 2 MB/s. when I connect the laptop to the router with a cable (cat6) I get proper high speed. Trying to figure out if it's a problem with the router or windows or what. Speedtest.net says I'm getting 16 MB/s DL wirelessly to my laptop. Shouldn't wireless N be capable of higher speeds than 1.5 MB/s?? Tests are done approx 10 feet from the router.

View 1 Replies View Related

Cisco Firewall :: Getting ASA5520 Total Configuration Dump?

Oct 9, 2011

We have a pair of ASA5520 firewalls setup in a very inefficient fashion, and I wish to convert them to an active/passive cluster. Trouble is, there are a number of configuration option I will need to re-implement (VPN tunnels, remote users etc), and trying to capture the configuation with a simple "show running-config" or "show running-config all" or even "show startup-config" doesn't get me things like the pre-shared-key from the VPN configurations - and I don't know them all, so I can't simply re-enter them.Is there any way to get a dump of the running (or startup) config which shows the hidden settings like pre-shared keys and OSPF message digest keys?

View 5 Replies View Related

Cisco WAN :: 2960 Switch Total Output Drops?

Jul 4, 2011

I have a 48 port 2960 switch with 2 10/100 ports ( fa0/46-47) setup in an etherchannel with a 2950 48 port switch. I am getting total output drops on port fa0/47. [code]

View 2 Replies View Related

Linksys Wireless Router :: Slow Transfer Speed From USB External HDD Connected To EA4500?

Jul 3, 2012

Transfer speed for sending or receiving files from a USB external HDD connected to the router is slow? Speed ranging from 2MB - 4MB/s. The HDD is definitely capable of at least 80MB/s if plugged directly into the PC. Is it meant to be this slow or there's a fix somewhere which I'm not aware of? Thought it's suppose to be the top of the line products but seems so inferior if I were to compare with other high end routers in the market which performs better, faster and definitely much cheaper.

View 9 Replies View Related

Linksys Wireless Router :: WRT54G To Transfer Admin Control Panel From Old Computer

Dec 30, 2011

When I first installed my wireless router a few years ago, I did it with my old computer which has Windows XP as its operating system.  It is on this computer that the Linksys "admin control panel" is installed, which allows me see what computers are connected through the router, see what the settings of the router are, etc. I recently purchased a new computer which has Windows 7 as the operating system.  As I transfer programs and documents from my old computer to my new computer, I have run into the problem of how to transfer the Linksys "admin control panel" from my old computer to my new computer. The original installation CD for Linksys won't work with Windows 7 so I don't even have that as a starting point.  I tried going to the web-based admin site, but can't access it from either computer.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved