Can't Access Router Settings Page

May 13, 2012

I am having a problem accessing my router settings page. everything was working fine and then all of a sudden my desktop couldn't get internet but all the laptops could so I tried everything power cycling the everything changing the Ethernet cable and I got nothing. So then I hard reset my router and erased all the settings and now it works so I have internet just fine and right away after I hard reset I could access my router settings page and input all of my settings like DNS servers and port forwarding and changing my SSID etc. but now every time I try and go to it it just won't I don't even get the login prompt nothing. So why I can't access this page. Here is a copy of my ipconfig /all. Also when I ping 192.168.0.1 I have no packet loss.

Edit:I have gotten it to work in IE I have to go to HTTPS://192.168.0.1 and then click go to site anyways after it gives me a warning about the certificate being invalid and I have to allow it or whatever otherwise it won't bring up the login prompt. Also the same thing is happening for FF so I need to go to https://192.168.0.1 and click I understand the risks and add exception for it to work.

Windows IP Configuration

Host Name . . . . . . . . . . . . : Andrew-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

[code]....

View 2 Replies


ADVERTISEMENT

Linksys Wireless Router :: Wrt120n Unable To Access Settings Page

Jan 6, 2012

Have a PS3 that will connect to my wrt120n if I unplug the modem and router then plug back in after 2 minutes. if I shut off my PS3 or after approx 1 hour, PS3 drops my connection. I'm trying to access my router page online but after entering the default into my browser, the pop up box will not accept any combo of entries to allow me access. I have an SSID name and my router is password protected. It does not connect me when I use any combo of user name or password or the default "admin".

View 2 Replies View Related

Linksys Wireless Router :: WRT610N No Access To Edit Any Settings On The QOS Page

Mar 11, 2012

I entered some QoS settings and now when I load the QoS page I get this Javascript error message in Firefox.Error: missing ) after argument list Source File: [URL]. Line: 100, Column: 47 Source Code: QosList[0] = new QosEntry('0','3','0','Kathy's Mac','3', infor);

Basically, the Javascript chokes on any computer name that you enter that has an apostrophe in it. As a result, I don't have access to add or edit any settings on that page. Seems like a major rookie mistake, especially for a major network device manufacture.

View 1 Replies View Related

How To Get Settings Page Of Router

Apr 30, 2011

I have a dlink dap-1360 which my computer technician installed for me earlier this year. i would now like to edit the details such as network name etc.how do i get to the settings page of my router.

View 1 Replies View Related

Cannot Access Router WRT54GX Web Page / Setup Page?

Jul 28, 2011

i need to get into the web page because i need to open my XBL nat and when i type in the password to get into the routers page i get a blank screen

View 2 Replies View Related

Linksys Wireless Router :: E3000 - Can't Connect To Router Settings Page

Dec 25, 2012

When I try to go to192.168.1.1 it says connection interrupted.  If i use the Cisco Connect it tells me i am not connected to the internet.  My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly.  I can go online, I just cant get to the router.  

View 9 Replies View Related

Belkin Routers :: Can't Get To Settings Page On N150

Feb 25, 2013

After our ISP had a network outage, our Belkin N150 stopped working properly & now I can't get to the Settings page to fix anything. I have used the Reset feature to no avail. The blue light is on but the "Fixit" feature only comes up with something about the ASDL line.

View 1 Replies View Related

Cisco Routers :: RV042 Firewall Page Settings / Interactions?

Feb 5, 2013

I have an RV042 which is being used as an interface to an ISP.The WAN address (public) is obtained via PPPoE.The LAN address (also public) is entered manually from an assigned block of public addresses.  This is the internet gateway for other publicly-addresses devices like firewalls, VPN devices, etc.
 
I have an RV042 to play with as will as one in production that I can access.Because the accesses are both through public addresses, I want to use https to access the device.  I've generated a number of questions as I'm not sure the behavior is understandable to me and maybe the behavior isn't even  consistent.
 
- If the firewall is Disabled, the https setting is still available.  So, presumably https will work with the firewall enabled or disabled?  Is that right?
 
- I take it that the Remote Management setting and port number are associated with the WAN port.  For example, can one set Remote Management ON with port 443 and still access via the LAN on port 80?  on port 443?
 
- If Remote Mangement is OFF then I presume that one cannot access the device through the WAN.  Yet, that seems to not be the case.  I wonder if the public addresses on this device affect this?
 
Well, I guess we might forget about the Port number and just ponder the following - Sort of a truth table:
 
 Remote OFF
    http...........WAN access: NO              LAN access:  YES
    https..........WAN access: NO             LAN access:  YES
Remote ON
    http...........WAN access: YES           LAN access:  YES
    https..........WAN access: YES          LAN access:  YES
 
This is what it would seem to me to be but it doesn't seem to work that way.

View 3 Replies View Related

Cisco Routers :: SRP547 Enter Both IP Settings And Username / Password On WAN Configuration Page

Aug 22, 2011

I'm moving from an 1801W to an SRP547.My adsl supplier (BT) has given me a username and password, and also a router IP address, a subnet and an gateway IP address. I have 13 fixed IP addresses. I don't speak cisco, so I'm using the built in interface to configure it.If i choose IPoA I can enter the IP settings. If I choose PPPoA I can enter the username and password.I do not see anyway I can enter both the IP settings and the username + password on the WAN configuration page.

View 9 Replies View Related

DIR-615 - Can't Access Router Page

Aug 17, 2011

It usually consists of installing routers in units. Occasionally I have to change the routers IP address to keep it from conflicting with other routers. To do so, I need to get to the router options to do that. Normally, typing in 192.168.0.1 gets me there with no problems. Sometimes it's a 10.0.10.1. (They have D-Link DIR-615 routers.) To make sure I know which address I need, I use the cmd and ipconfig /all. Some of the routers spit out an IPV6 address instead of the IPV4 that I need to access the router. Even after a factory reset, it still does this. I can't get in to change anything.

View 4 Replies View Related

Can't Access Admin Page Through Router?

Jul 3, 2012

Moved into a new place, set up a connection. Server provider gives only one mac address, they set it on my router. They say that it should be working, make a restart and that's it. I did that but still no connection. Moreover, I cannot connect through the router at all and therefore cannot access router admin page to configure it either. Now what to do? Password for the router is correct. Even when I take down all the security, still I cannot connect.To be more specific, at first I could enter the router admin page, but since I didn't know how to configure it properly, I made some mistake. I think I choose setting "configure wireless network" and changed something there. After that I cannot access the admin page or connect through the router.

View 1 Replies View Related

Can't Access Router Setup Page

Mar 22, 2011

i need to do the following:

-go to routers startup page

-log in

-look for my WAN MAC address

it seems so easy, but i keep getting instruction to do things like type in different numbers into my browser which never work.

View 14 Replies View Related

Can't Access Own Router Configuration Page

Jan 4, 2013

I have a wireless Netgear extender, and can not find set up page..Can't access own router configuration page

View 3 Replies View Related

Linksys Won't Allow Access To Router Page

Apr 17, 2011

I have a linksys router, Its at my sisters house. her son is trying to hook up his Xbox to it. The router will not allow me to access the router page, ( I called them and walked them through it). I reset the linksys router, by holding the reset button in for 45 seconds. Then I access the router page by going to 192.268.1.1 Windows gives me a popup to log in, What I find on the internet for a default login is the user name is blank and the password is admin. OR the both the user name and password is admin. However it still will not let me into the router page.

I am wondering if the login popup is something with the windows settings. As when I had the router here at my house, I think It just went to the webpage of the router and thats where it asked me for the user name and password. I do not recall the popup login window before the router page. Is there something to turn off to set it so that windows does not give a popup to login and goes to the webpage to login?

View 9 Replies View Related

Unable To Access Router Configuration Page?

Aug 8, 2012

I have the issue of being unable to access my router configuration page. My standard gateway IP (83.226.48.1), does not work, resulting in "unable to connect". If I try with my IPv4-adress, it just comes out with a blank page (Mozilla Firefox and Internet Explorer).

View 17 Replies View Related

Linksys Wrt54g - How To Access Router Set Up Page

Oct 8, 2011

running linksys wrt54g wireless router to two towers and 1 laptop----had short power outage after which i lost connection to router only on one tower---other tower and laptop were unaffected----had green indicator lights for positions 1 and 2 hard wire connected towers before outage---now only position 2----looking for reasons why I lost number 1 and thus connectivity to the router----have tried powering down router etc---but have not reset it---looking for more info first

View 1 Replies View Related

Linksys WRT54G V3.1 - Cannot Access Set Up Page In Router

Sep 18, 2011

My wifi router, Linksys WRT54G v3.1 has been working fine till now. Suddenly my laptop stopped receiving wifi signal. I am unable to access the set up page via 192.168.1.1 either from my laptop or from my desktop that is connected to the modem via the router. I reset the router as well but no luck.

View 5 Replies View Related

TD-W8961NB - Cannot Access Router Internet Page

Sep 28, 2012

I just got a new router and modem in 1:

300Mbps Wireless N ADSL2+ Modem Router (Annex B) TD-W8961NB I use a WIRED connection, not wireless.

When I type in the IP adress into my IE adress bar (192.168.1.1), it says it cannot connect to the internet.

I checked if all cables are correct alot of times, and reset it a ton of times, but no luck.

View 7 Replies View Related

Can't Access Router Settings

May 28, 2012

So I used an Url to acess my router but then, it asked for a username and password. I know I havent messed with it because this is the first time I seen this. I tried leaving the username blank and typing in "admin" for password but nothing worked

View 5 Replies View Related

BT Hub - Can't Access Router Settings?

Jan 14, 2012

I used to have Avanti Satellite broadband but then upgraded to new BET technology with BT which allowed people living very far from their exchange to get up to 2mb phone line broadband. With Avanti, I could access my Buffalo routers settings by just typing in the routers ip.But, now with the new BT Hub we got, whenever I type in ipconfig to cmd, the gateway address is the address to access the settings of the hub. I tried the old bufallo ip but it is not working. I think this is because the hub is a router aswell. Is there anyway I can access the routers settings?

View 13 Replies View Related

Samsung Galaxy Mini Cannot Access My Router Page

Mar 18, 2013

So I was having problems staying connected to the wifi on my samsung galaxy mini. Many fixes for other models in the galaxy series, limited fixes for the 'mini' version. Long story short, I was told to edit the DHCP lease time in my router settings.There I bumped into another problem.No mather what I tried there was no way of accessing the page. Weird thing is I remember having logged in on it before.Usually you just have to give in the standard gateway which should be 192.168.0.1 in my case. I checked it using ipconfig in cmd and my presumption was confirmed.Then I tried resetting the router to set back any settings that might've accidently been changed, in the hope that it would also reset the standard gateway and no succes.Now my knowledge about networking is verry limited.

View 8 Replies View Related

ARRIS TG862 - Can't Access Own Router Configuration Page

Nov 18, 2012

I have Time Warner[Road Runner] and an ARRIS TG862 router. I have tried cmd->ipconfig->and connected through the address shown[Default Gateway;192.168.0.1] and have tried an ipconfig/ flushdns -> /release ->renew as well to no avail. Is there anything I could do to access the page? P.S. This was all done through a Windows 7 desktop connected directly to the router through an Ethernet cable

View 5 Replies View Related

Can't Access Router Takes Me To User Agreement Page

Nov 27, 2011

i need to access my routers settings. i have my default gateway 192.168.21.254 . i enter that into my web browser, and it takes me to a user agreement page. the whole purpose of this is to set my NAT type to open on my xbox 360.

View 3 Replies View Related

Unable To Access Admin Page Of Baitone Router?

May 22, 2012

I was doing some changes in baitone router due to mistake i have disabled something in it.Now i am not able to access its admin page....Before it i was accessing through 192.168.1.1

View 3 Replies View Related

D-Link DIR-655 :: Firmware Upgraded Now Cannot Access Router Page

Dec 27, 2011

I upgraded my router from version 1.2 to 1.35NA, through the Tools / Systems page on the router (uploaded the bin file).  I am connected to the router via a wired connection.

During the upgrade, the message said I wouldn't be able to access the webpage until 75 secs. I watched it count down the seconds and then when it refreshed, I could not get to my routers page:  192.168.1.2

The DLink Router is connected as a pass through router to my FIOS router, so that I can use the wired ports and I use the DLink as my wireless router (fios router wireless strength was poor).

All the lights on the router are working as though everything is ok. I am still connected to the Internet, so it appears that the pass through of my wired ports is still working after the firmware upgrade, but wireless is not. Not surprising. I expect I may have to upload my settings (which I did save), but since I cannot get to the routers page, I feel a bit stuck.

two more bits of into.  I also tried getting to 192.168.0.1, which might be the default?  and I cannot get there either.  My Fios router is on 192.168.1.1 (and as mentioned, the DLink should be at 192.168.1.2). Fios Router reports that the 192.168.1.2 port is inactive.

View 5 Replies View Related

TD-W8910G - Cannot Access Login Page Of TP-Link Router?

Jan 31, 2013

Whenever I enter 192.168.1.1 to access the login page of my router, I cant access it to configure it even after resetting it !I also tried changing TCP/IP settings to static as mentioned in the router's manual but it dint work?

View 4 Replies View Related

Unable To Access Router Admin Page Haier R800 Router

Dec 13, 2012

Unable to access router admin page for Haier model R800

View 1 Replies View Related

Linksys Wireless Router :: E1200 - How To Access Router Admin Page

Apr 1, 2012

I want access the my E1200 website in order to implement new username and password to secure the network.

View 1 Replies View Related

Can't Access Belkin Router Settings

Sep 25, 2012

I just say that I'm not brilliant with pcs but I'm able to follow instructions if they are in the consistency of baby food! XD..Well basically I can't access my wireless modem router's settings (2 in 1 device I believe). I managed it once but haven't been able to do it again. I've tried the following:

-Reset router many times.
-Turn it on and off many times.
-reset router while ethernet cable is connected and without.
-ipconfig/release and renew

notthing works!!! I noticed the ip address changed from the default one of 192.168.2.1 to a completely different one...95.175.138.When I turned on my laptop today after being off overnight (and the router) somehow I did managed to get on the settings page again using 192.168.2.1 but didn't last for long. While I did this there was a warning icon next to the wifi icon, but then when the warning sign went off that's when the router's setting page stoped working again.I need to get to the router setting because currently is set to go off when i turn off my laptop which is a bit pointless and change a password.

View 14 Replies View Related

Cannot Access Wireless Router Settings?

Mar 5, 2013

I can't get into my router's settings, when I try, chrome says the page is not available. I checked, the IP is correct, and I can't access it on multiple computersI recently changed a few setting. (I set it to max 300 mbs per second from 54, and one other thing that I don't recall) The problem occurs on three different computers(A mac and two PCs) I've restarted my router several times to no avail. What should I do?

View 1 Replies View Related

Can't Access Hotel Router Settings

Mar 3, 2013

me and my co-worker bought an xbox and we can connect online but we have no open NAT. I asked the manager if I could take a look and set it, he said that'd be fine but there's one problem; it's seperated by sheet rock in the cieling. I asked if I could take a look on the lobby PC and try to access it there and he said it'd be fine, he understands that I'm not tampering with anything other than just turning the NAT on, he's been trying to access it himself. I went to the cmd prompt and did ipconfig /all, got the default gateway ip and typed it in, but there are no settings just a display from air2data.I can't reset the router.

View 1 Replies View Related

Can No Longer Access Any Of Router Settings

May 1, 2012

My internet has been very sluggish so after reading the thread about Router security and neighbors who might be stealing my internet connection via WIFI, I decided to check what kind of security I had. Turns out I have WPA and no unknown devices were connected at that time. Would like to get an email whenever a NEW device logs in...if that is possible. But while I was in there "futzing around" I did something terribly wrong. I followed all of these steps. Then I noticed that the router speed section had me listed at 145mbps. I had recently changed cable companies to one that provided faster interenet. So I figured I would bump that up to 300 mbps. I can no longer access any of my router settings. What did I do, and how can I undo it?

View 4 Replies View Related

Reset Motorola SBG901 Router - Now Can't Access Login Page

Feb 21, 2012

I have a Motorola SBG901 router. Typing ipconfig showed that 172.18.8.1 is the Default Gateway and this is the URL I always used to access the router login page.

I reset the router today by holding the reset button. Now typing the URL 172.18.8.1 does not work. The router user guide says to go to 192.168.0.1. I have tried this but it also does not work. For both I just get the "problem loading page" in Firefox.

The Internet works fine both with an ethernet connection and wirelessly. My only issue is that I cannot access the Motorola router login page. I could access it fine this morning before I reset the router.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved