Can't Access Hotel Router Settings
Mar 3, 2013
me and my co-worker bought an xbox and we can connect online but we have no open NAT. I asked the manager if I could take a look and set it, he said that'd be fine but there's one problem; it's seperated by sheet rock in the cieling. I asked if I could take a look on the lobby PC and try to access it there and he said it'd be fine, he understands that I'm not tampering with anything other than just turning the NAT on, he's been trying to access it himself. I went to the cmd prompt and did ipconfig /all, got the default gateway ip and typed it in, but there are no settings just a display from air2data.I can't reset the router.
View 1 Replies
ADVERTISEMENT
Mar 19, 2013
Region : Singapore
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
I travel and connect this device in the hotels. On this occasion, the hotel wired connection is limited to one device with username/password entered through the web page. Is there a way to share this connection using one of the modes to multiple devices (the devices will run in a different subnet than the hotel network). I understand I can do this in WISP mode but only for sharing hotel wireless connection. The hotel wifi has poor reception, hence I want to use wired. Is there a way to do this? I would imagine this would be not an unusual scenario in many top hotels. Mid hotels generally do not have such limitations.
View 4 Replies
View Related
Jan 21, 2013
I'm staying at a hotel where the internet offered is only wired. I can plug in the ethernet cable and no log-in is required. However, when I connect to the router and then try to access the internet from my laptop it does not appear to work.
View 2 Replies
View Related
Dec 28, 2012
Region : Canada
Model : TL-WR700N
Hardware Version : V1
Firmware Version : latest
ISP : various
What would seem to be an ideal way to share a hotel wifi signal with other devices, would be:
Laptop signs into hotel/resort wifi and completes sign-in page. Share wifi signal with TP router via an ethernet cable. TP router acts as hotspot for connection by other devices. This is the method this Apple based article suggests:
[URL]
I have tried this with Windows 7 using a bridge between the laptop wifi and lan adapters. But I must be doing something wrong.
The other option is to use ICS, but not sure then if the hotel's system would see additional devices. (we are limited to 4 where we stay, but exceed that when family visits!)
View 9 Replies
View Related
May 28, 2012
So I used an Url to acess my router but then, it asked for a username and password. I know I havent messed with it because this is the first time I seen this. I tried leaving the username blank and typing in "admin" for password but nothing worked
View 5 Replies
View Related
Jan 14, 2012
I used to have Avanti Satellite broadband but then upgraded to new BET technology with BT which allowed people living very far from their exchange to get up to 2mb phone line broadband. With Avanti, I could access my Buffalo routers settings by just typing in the routers ip.But, now with the new BT Hub we got, whenever I type in ipconfig to cmd, the gateway address is the address to access the settings of the hub. I tried the old bufallo ip but it is not working. I think this is because the hub is a router aswell. Is there anyway I can access the routers settings?
View 13 Replies
View Related
Sep 25, 2012
I just say that I'm not brilliant with pcs but I'm able to follow instructions if they are in the consistency of baby food! XD..Well basically I can't access my wireless modem router's settings (2 in 1 device I believe). I managed it once but haven't been able to do it again. I've tried the following:
-Reset router many times.
-Turn it on and off many times.
-reset router while ethernet cable is connected and without.
-ipconfig/release and renew
notthing works!!! I noticed the ip address changed from the default one of 192.168.2.1 to a completely different one...95.175.138.When I turned on my laptop today after being off overnight (and the router) somehow I did managed to get on the settings page again using 192.168.2.1 but didn't last for long. While I did this there was a warning icon next to the wifi icon, but then when the warning sign went off that's when the router's setting page stoped working again.I need to get to the router setting because currently is set to go off when i turn off my laptop which is a bit pointless and change a password.
View 14 Replies
View Related
Mar 5, 2013
I can't get into my router's settings, when I try, chrome says the page is not available. I checked, the IP is correct, and I can't access it on multiple computersI recently changed a few setting. (I set it to max 300 mbs per second from 54, and one other thing that I don't recall) The problem occurs on three different computers(A mac and two PCs) I've restarted my router several times to no avail. What should I do?
View 1 Replies
View Related
May 13, 2012
I am having a problem accessing my router settings page. everything was working fine and then all of a sudden my desktop couldn't get internet but all the laptops could so I tried everything power cycling the everything changing the Ethernet cable and I got nothing. So then I hard reset my router and erased all the settings and now it works so I have internet just fine and right away after I hard reset I could access my router settings page and input all of my settings like DNS servers and port forwarding and changing my SSID etc. but now every time I try and go to it it just won't I don't even get the login prompt nothing. So why I can't access this page. Here is a copy of my ipconfig /all. Also when I ping 192.168.0.1 I have no packet loss.
Edit:I have gotten it to work in IE I have to go to HTTPS://192.168.0.1 and then click go to site anyways after it gives me a warning about the certificate being invalid and I have to allow it or whatever otherwise it won't bring up the login prompt. Also the same thing is happening for FF so I need to go to https://192.168.0.1 and click I understand the risks and add exception for it to work.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Andrew-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
View 2 Replies
View Related
May 1, 2012
My internet has been very sluggish so after reading the thread about Router security and neighbors who might be stealing my internet connection via WIFI, I decided to check what kind of security I had. Turns out I have WPA and no unknown devices were connected at that time. Would like to get an email whenever a NEW device logs in...if that is possible. But while I was in there "futzing around" I did something terribly wrong. I followed all of these steps. Then I noticed that the router speed section had me listed at 145mbps. I had recently changed cable companies to one that provided faster interenet. So I figured I would bump that up to 300 mbps. I can no longer access any of my router settings. What did I do, and how can I undo it?
View 4 Replies
View Related
Jul 29, 2012
I am trying to change the name of my wireless network but when I go to the 192.168.1.1 and type in my password, it just goes to a blank screen. I've accessed my router a lot of times before this way. It is a lisksys router.
View 1 Replies
View Related
Jun 26, 2011
I bought an Actiontec GT724WGR. I downloaded the latest firmware and went to install it. When it finished, I got the confirmation box and it gave me the click okay to restart option. I clicked okay, and when the router power cycled, the Power light stayed amber. I can't manually reset the setting back to default with the reset button. I can't access the router settings.
View 1 Replies
View Related
Jan 1, 2012
I have a wrt54g Linksys router, and recently whenever I type 192.168.1.1 into the internet in order to access the settings/homepage, I get " internet cannot display this webpage"
View 2 Replies
View Related
Jun 26, 2012
I installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
View 4 Replies
View Related
Jul 8, 2011
I changed the router's IP to 192.168.2.1 due to the same situation as this [URL] linksys and now I can't access my settings I have tried the both pips and nothing and I can't seem to get my linksys wrt54gs v7.2 to let two computers be on the internet at the same time both can be on the network but on one on the internet
View 6 Replies
View Related
Jul 22, 2010
My computer is an XPS 360 with alot of upgrades. After looking at the specs of D-links routers I thought I give it a try. Hooked up, works like a dream. Couple months later my computer was saying I have "limited connectivity." All of the other computers have full access and works great. I tried going to my routers home page, but all I get is "The server at 192.168.0.1 is taking too long to respond." Ive tried renewing the ipconfig, restarting everything, new cables....everything I can imagine. I tried calling my ISP and they told me it wasnt there fault, that its pretty much on my end. I called Dell for support, said my warranty went out and they cant do a thing.
View 14 Replies
View Related
Oct 13, 2012
I just purchased an E2500 wireless router. I put the Cisco Connect setup disc in and it could not find my router. With excellent Tech Support, I got it to work. I still do not have any Cisco Connect software on my PC to set passwords or preferences. If I try to run the disc again, it gives me a system critical error and shuts down my computer. How can I get software to access my router settings?
View 1 Replies
View Related
Jul 6, 2012
I was just recently hired in my company, we have an sf300-24p switch but I cant find the console cable for it, I think it needs a female to female db9 serial cable, all I have is a DB9 serial to rj45 console cable for the 2801 router, also I cant find the IP address of the sf300 switch, it is directly connected to the 2801 router, I issued a show arp to the router but didnt find the switch's IP add for web access, to sum it up I have no way of configuring the switch, is there any way to find the IP address of the switch? It also dosnt show on show cdp neighbors?
View 13 Replies
View Related
Jan 7, 2013
to enable UPNP on a Virgin Media Super Hub, I have tried using both the IP addresses provided by Virgin media (192.168.0.1 and 192.168.100.1) but regardless of which browser I use the page constantly fails to load.
View 2 Replies
View Related
Aug 31, 2011
I have a Buffalo WHR-G125 router which was given to me for free by my ISP for being a loyal client. At home I have a computer, a laptop and a netbook. The router is connected to the computer and I have no trouble accessing the Internet on all three of these devices. I can open pages, download etc.
However: However if I decide to host a server on some game, my friends cannot connect. After doing some research, I found out that certain ports are "closed" (whatever that means) and I need to open them in order for everything to start working again."
Anyway, I checked the infamous site "portforward.com" for instructions on how to open these ports. It was all fine and dandy, until the point where they stated I need to access my router settings page ("default gateway" or whatever, you'll have to excuse my ignorance). I entered "ipconfig" in cmd and it turns out my default gateway is 192.168.1.1. So I entered this in the URL bar of my browser and got a nasty surprise:
"404 Not Found The requested URL was not found"
I am truly stumped. The address is not accessible on neither the computer, nor the laptop or the netbook. I tried some automatic port forwarding software, but it didn't seem to do anything for me.
The only reason for this I can think of is that my ISP is probably blocking the router settings page for some reason (and how unfortunate, I can't even complain, because it's free, after all).
I tried asking on the official Buffalo forums and even tried asking for support and got pretty much the same message: "Try resetting. However, if it's flashed, you can't do anything.".
Not exactly sure what to do right now. My worries:
1.) I'm not even exactly sure how to reset the darn router
2.) I'm scared that reseting won't do a thing and even if it does, I'm not sure I'll be able to reconfigure the entire thing by myself and the worst case scenario, not having internet at all.
Is there any way to access the friggin router settings page?
View 5 Replies
View Related
Jan 6, 2012
Have a PS3 that will connect to my wrt120n if I unplug the modem and router then plug back in after 2 minutes. if I shut off my PS3 or after approx 1 hour, PS3 drops my connection. I'm trying to access my router page online but after entering the default into my browser, the pop up box will not accept any combo of entries to allow me access. I have an SSID name and my router is password protected. It does not connect me when I use any combo of user name or password or the default "admin".
View 2 Replies
View Related
Dec 31, 2012
just set up my EA6500 in bridge mode, i have the Ethernet cable plugged into the EA6500's yellow WAN port, is that correct, Cisco Article ID: 24583 is not that clear, Cannot also seem to access the EA6500's settings to setup security?
View 2 Replies
View Related
Mar 11, 2012
I entered some QoS settings and now when I load the QoS page I get this Javascript error message in Firefox.Error: missing ) after argument list Source File: [URL]. Line: 100, Column: 47 Source Code: QosList[0] = new QosEntry('0','3','0','Kathy's Mac','3', infor);
Basically, the Javascript chokes on any computer name that you enter that has an apostrophe in it. As a result, I don't have access to add or edit any settings on that page. Seems like a major rookie mistake, especially for a major network device manufacture.
View 1 Replies
View Related
Oct 4, 2012
A friend of mine runs a small hotel, and would like to enable Wi-Fi in the guest rooms. (One thing to know is the hotel is an old farm house, the walls of which are made of clay/mud/brick/cow poo/thatch etc etc) url...The pink area is a rough guide to the current Wi-Fi coverage. This is broadcast from a 3 antenna Wi-Fi transmitter. (Mostly happy with it's performance.)The transmitter is attached, via an ethernet, to a Powerline adaptor (Blue dot).The other end of the Powerline system is in an office, above the kitchens (Red dot). This is attached via ethernet to the main router.The Blue area's are the guest rooms. This is where he want's to supply a signal to.
1) Buy 6 or so powerline adaptors, that have built-in WiFi, and sign them out on a requested basis. Something like this: ZyXEL WRE2205 Powerline Wireless-N300 Range Extender | Ebuyer.com
2) Buy 3 or 4 basic Powerline adaptors, connect via ethernet to 3 or 4 dedicated transmitters. Because of the risk of theft, all this would be wired up in the loft space, out of sight. Plug extensions would have to be wired up into the loft areas for the Powerlines to plug in to.
3) Dispense using the Powerline network completely. Run an ethernet from the office to room 5/6, then connect up to 3 or 4 dedicated transmitters set up in loft areas.
View 1 Replies
View Related
Jul 24, 2012
I'm currently staying at a marriott in NYC and at night after work the wireless access becomes awful. As a work around I've plugged the ethernet into my apple airport express and launched my wireless network as usual.Things are all fine and dandy for the first hour or so of browsing or watching netflix. But then it seems to lock up and I lose connection. I haven't seen any caps on data transfer that would explain it but is there something else I should be looking at? The fact that it works (albeit for a limited time), is a good sign I think. I'm mostly using it for my ipad to watch netflix etc.
View 2 Replies
View Related
Aug 12, 2012
I am on travel and my dell inspiron can not connect or recognize the hotel wifi.
View 1 Replies
View Related
Sep 11, 2011
I made a reservation then cancelled it online, but Sheraton Dallas Hotel charged my MC for one night for "No show ". Because they did not send me e-mail confirmation for both reservation and cancellation, I have no way to prove my cancellation. In e-mail they said:
"At the time you booked your reservation online you did not have your email address noted"
I have been traveling for the past 10 years and reserved Hotels online, and I never forgot to give my e-mail address not even once, so how could they said that I forgot this time ? I believe in keeping expenses low, if I don't give my e-mail address, I may end up paying expensive long distance call to communicate, as many hotels have no toll free numbers for dispute solving, so it's impossible that I forgot to gave my e-mail address! Unless someone manually erased my e-mail address for unknown reason. This I see as indication that a computer system error existed at that time What do you advice me to do to solve this problem ? Maybe computer system record ? In that case what particular system file I should ask them to mailed to me. Is there any way I can spot if there was any tampering? Like erased my e-mail entry, erased cancellation request?
View 2 Replies
View Related
Mar 25, 2013
Region : UnitedKingdom
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP :
I am trying to work out how I can use the WR702 to connect to a Hotel's wireless connection. As with most modern hotel setups, the hotel requires the user to access a web browser and enter the room number and select a purchase plan.I believe there must be a way that I can connect the WR702 to the hotel's network and then use a browser on a linked (wireless or ethernet) laptop to launch the browser and log in, however, I have tried every default configuration on the WR702 and cannot find a solution.
Setup:
WR702 router
HP EliteBook 8440p laptop (ethernet and wifi available)
Hotel wifi (multiple identical SSIDs in the survey but shows as a single wifi name on my iPhone)
View 1 Replies
View Related
Apr 28, 2012
Everything was working fine. Changed Nothing on the router. Goes out and now wont broadcast a wireless signal, cant manually reset the router, or get into the settings with 192.168.1.1
Currently I am wired through it with my desktop and its working, but not much else.
View 3 Replies
View Related
Oct 9, 2012
have been trying to access 192.168.1.1 TPLINK Model TD-w8950ND configurations to ensure settings are correct and check password etc.
Have been unable to, I used to access it immediately, but for some reason, now I can;t after changing laptops. Not impressed. May have to reset laptop to factory settings as last resort. Don't know.
View 2 Replies
View Related
Jun 1, 2011
Half of the time i have to stay at hotel due to business trip. The hotel i stay will provide free internet broadband with cable but no WIFI. Can i set up WIFI if i have router?
View 2 Replies
View Related
Jul 23, 2011
Earlier today I put in a password for my Belkin_G_Wireless_CC7A57 router. I had to change something, im not sure what it was. it was like WPA or WAP. now it wont let me go to my router settings 192.168.2.1 in the address bar is how i have been getting to it. now it just takes me to a OOPS google chrome cannot open this web page..... I just want to restore the router to it factory default settings. it will let this laptop on and another one in the house but not an older one we have which runs Windows XP. If i can get to my router settings i will be fine..
View 2 Replies
View Related
May 4, 2010
I try to change the wmm settings to video, but it's always going back to background settings after saving.I already re-uploaded the firmware, but with no result...I noticed that is a newer firmware available for the WET610n where they solved this issue, but they haven't changed it for the WAP610n....
View 9 Replies
View Related
