I am trying to change the name of my wireless network but when I go to the 192.168.1.1 and type in my password, it just goes to a blank screen. I've accessed my router a lot of times before this way. It is a lisksys router.
View 1 Repliesmy screen goes blank if not used after about 10 mins how do i extend time?
View 1 Replies View Relatedi changed the hd in a nm-cue and configured the router accordingly and i opened a session to it but the screen is blank.
[code]...
When I log into my router I can see the navigation tree on the left, but the rest of the screen is blank. I was at one time able to see the info on my Windows 7 computer and not my Vista, but now all my computers are blank.
View 3 Replies View RelatedI Cannot setup the DHCP on the router, the page has no content.
View 1 Replies View Relatedhave older laptop vista no picture blank screen new laptop window 7 can i hook them together
View 1 Replies View RelatedI'm running a new RV042 with the latest firmware (4.1.1.01). I set it up about 2 weeks ago and have been running it without an issue. Today I tried to go in to the web utility to make some changes. I was prompted for the userid/password, which it appeared to accept (if I typed in the wrong ones it rejected it), and then the screen went blank (normally I would get the status screen now.) Instead the screen I get is the light blue of the log-in screen, but there is nothing on it. The router has switched to the page https://192.168.1.1/home.htm I have tried different browsers and accessing it from different computers - the situation is always the same. I have power cycled the router, and there is no change. I suspect the next step is a manual reset to factory defaults - but of course I would rather not (as I didn't save all my settings of course!)
View 2 Replies View RelatedIf i try to ssh to a 3750 switch on our 4th floor, it ask's me for a username and password.
After entering the password, it doesnt connect. It shows a blank screen with a flashing cursor.
If i connect to the switch directly via console port, i can see port uplink and downlinks but still cant do anything more.
I have a computer that is connected to a linksys wireless router model WRT160NV2. I also have a laptop. I have never set up a lock or anything on my wireless connection and I think other people are using it. When I type the IP address 192.168.1.1 on my laptop, I do not get the screen to pop up to change my settings. Do I need to do this from the computer?
View 1 Replies View Relatedhow i can change WRT160Nv2 settings if i cannot find it with default 192.168.1.1;i'm using it as secondary router connected to FIOS actiontec primary, which has the 192.168.1.1; factory default reset linksys to that same IP, can't get it.cannot get internet without actiontec as its coax connected, and linksys doesn't have coax port.can'ty open configure page without internet connection, i believe.tried to use a neighbor's wireless but that's using 192.168.1.1 as well, can't log in to that.this started with firmware upgrade of linksys which left it invisible; didn't complete the upgrade, i don't think. but i've reset it and still nothing.
View 9 Replies View RelatedI have a WRT120N with Firmware 1.0.06..First peculiarity is that I can't access the web based admin screen from Firefox 7.0.1. The password prompt appears but won't proceed from there.Second, and main issue is that frequently (several times a day) I get a 'Limited Access' error on my wireless connection. On mouse roll over Windows 7 Pro gives the error message 'no internet access'. This problem appears to resolve itself after several minutes or straight away if the router is powercycled. During these 'Limited Access' moments I am unable to connect to the route web based admin page nor ping or tracert. [code]
View 8 Replies View RelatedI tried to log on to my wireless routers IP address but it only gives me a blank page after signing in. the IP address is 192.168.1.1. Is there a problem with this ip address?
View 1 Replies View Relatedis it possible to eliminate the the guest login screen from being displayed/required to acess router from an added device(like a smart tv with a web browser)?router is an e2500,approx.
View 4 Replies View RelatedSo I used an Url to acess my router but then, it asked for a username and password. I know I havent messed with it because this is the first time I seen this. I tried leaving the username blank and typing in "admin" for password but nothing worked
View 5 Replies View RelatedI used to have Avanti Satellite broadband but then upgraded to new BET technology with BT which allowed people living very far from their exchange to get up to 2mb phone line broadband. With Avanti, I could access my Buffalo routers settings by just typing in the routers ip.But, now with the new BT Hub we got, whenever I type in ipconfig to cmd, the gateway address is the address to access the settings of the hub. I tried the old bufallo ip but it is not working. I think this is because the hub is a router aswell. Is there anyway I can access the routers settings?
View 13 Replies View Relatedset up a wireless network connection? i have a wireless router but cannot access it using my browser?
View 3 Replies View Relatedi just bought a netgear router. i was able get into routers login screen once. thought every thing is good? everything looked correct? now i cant get into login screen at all again. im confused it should be easy. either use 192.168.1.1 or 192.168.1.2 or 192.168.0.1 and 192.168.1.254. i tried them all with no luck.
View 3 Replies View RelatedSet up a wireless network connection? i have a wireless router but cannot access it using my browser?
View 1 Replies View RelatedI have the Clear Hub Express (Router/Modem combined) and I am trying to connect a separate Belkin Wireless Router (Model F5D8233-4v1) to allow additional "hard wire" connections. Correct settings required for the Clear Hub Express and any additional information that can instruct me on how to access the Belkin set-up screen if required. The standard 192.168.2.1 is not allowoing access to the Belkin Router.
View 1 Replies View RelatedI was setting a static IPs for my PCs, and for the Preferred and Alternate DNS Server addresses I looked on my router's Device Information page. It had "Primary DNS Server: 121.98.0.1", but "Secondary DNS Server:" is reported as "0.0.0.0". Router is a DIR-655:
I looked on my ISP's website and they have "121.98.0.2" listed as the Secondary Name Server/DNS:
Why does the router not report that? Is there something wrong? Should I still set 121.98.0.2 as the Alternate DNS Server in Windows?
EDIT: BTW, my modem reports both primary and secondary DNS servers on it's info page.
I just say that I'm not brilliant with pcs but I'm able to follow instructions if they are in the consistency of baby food! XD..Well basically I can't access my wireless modem router's settings (2 in 1 device I believe). I managed it once but haven't been able to do it again. I've tried the following:
-Reset router many times.
-Turn it on and off many times.
-reset router while ethernet cable is connected and without.
-ipconfig/release and renew
notthing works!!! I noticed the ip address changed from the default one of 192.168.2.1 to a completely different one...95.175.138.When I turned on my laptop today after being off overnight (and the router) somehow I did managed to get on the settings page again using 192.168.2.1 but didn't last for long. While I did this there was a warning icon next to the wifi icon, but then when the warning sign went off that's when the router's setting page stoped working again.I need to get to the router setting because currently is set to go off when i turn off my laptop which is a bit pointless and change a password.
I can't get into my router's settings, when I try, chrome says the page is not available. I checked, the IP is correct, and I can't access it on multiple computersI recently changed a few setting. (I set it to max 300 mbs per second from 54, and one other thing that I don't recall) The problem occurs on three different computers(A mac and two PCs) I've restarted my router several times to no avail. What should I do?
View 1 Replies View RelatedI am having a problem accessing my router settings page. everything was working fine and then all of a sudden my desktop couldn't get internet but all the laptops could so I tried everything power cycling the everything changing the Ethernet cable and I got nothing. So then I hard reset my router and erased all the settings and now it works so I have internet just fine and right away after I hard reset I could access my router settings page and input all of my settings like DNS servers and port forwarding and changing my SSID etc. but now every time I try and go to it it just won't I don't even get the login prompt nothing. So why I can't access this page. Here is a copy of my ipconfig /all. Also when I ping 192.168.0.1 I have no packet loss.
Edit:I have gotten it to work in IE I have to go to HTTPS://192.168.0.1 and then click go to site anyways after it gives me a warning about the certificate being invalid and I have to allow it or whatever otherwise it won't bring up the login prompt. Also the same thing is happening for FF so I need to go to https://192.168.0.1 and click I understand the risks and add exception for it to work.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Andrew-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
me and my co-worker bought an xbox and we can connect online but we have no open NAT. I asked the manager if I could take a look and set it, he said that'd be fine but there's one problem; it's seperated by sheet rock in the cieling. I asked if I could take a look on the lobby PC and try to access it there and he said it'd be fine, he understands that I'm not tampering with anything other than just turning the NAT on, he's been trying to access it himself. I went to the cmd prompt and did ipconfig /all, got the default gateway ip and typed it in, but there are no settings just a display from air2data.I can't reset the router.
View 1 Replies View RelatedMy internet has been very sluggish so after reading the thread about Router security and neighbors who might be stealing my internet connection via WIFI, I decided to check what kind of security I had. Turns out I have WPA and no unknown devices were connected at that time. Would like to get an email whenever a NEW device logs in...if that is possible. But while I was in there "futzing around" I did something terribly wrong. I followed all of these steps. Then I noticed that the router speed section had me listed at 145mbps. I had recently changed cable companies to one that provided faster interenet. So I figured I would bump that up to 300 mbps. I can no longer access any of my router settings. What did I do, and how can I undo it?
View 4 Replies View RelatedI am having trouble accessing my DIR-655 remote management screen via ip to my network.To make sure i didnt have any odd settings, i did a hard reset on my router first.I then enabled remote management, and left the default port 8080 I try to access viw the ip address on my status page suffixed by the port 8080 [URL] page cannot be found.I then enabled https and tried to access via:[URL]page cannot be found.I then setup a entry in the virtual server to redirect http requests to my workstation hosting IIS7, if i connect to localhost, the iis welcome screen appears, but if i browse to my ip, i get nothing.I am using Cox residential service, i called them and they informed me that they do not filter or block requests in any way.
View 12 Replies View RelatedI bought an Actiontec GT724WGR. I downloaded the latest firmware and went to install it. When it finished, I got the confirmation box and it gave me the click okay to restart option. I clicked okay, and when the router power cycled, the Power light stayed amber. I can't manually reset the setting back to default with the reset button. I can't access the router settings.
View 1 Replies View RelatedI have a wrt54g Linksys router, and recently whenever I type 192.168.1.1 into the internet in order to access the settings/homepage, I get " internet cannot display this webpage"
View 2 Replies View RelatedI have a Netgear WNDR3300 Dual-Band and is setup to use both 2.4Ghz and 5Ghz to achieve 300 Mbps connection.
On the DAP-1522, I use IE (not Firefox or Chrome) for configuration as follow:
- IP address: STATIC
- Wireless config: using Wizard
- Wireless security: WPA2 / AES
- Mac Cloning: disabled
I tested this by connecting a Windows 7 desktop AND laptop via Ethernet cable and both laptop can obtain IP address dynamically, so my DAP-1522 is talking to the WNDR3300 (it has DHCP). Both Win 7 machines can also access the Internet.The problem is, I can NO LONGER access DAP-1522 admin screen, even by typing the static IP address assigned to it. The ONLY way I can re-access it is:
a). Reset DAP-1522
b). Shutdown the WNDR3300 wireless router, assign a static IP to the laptop, connect via cable to DAP-1522
I installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
BEFSR81 v3.1 Current firmware 2.51.4 build 600 (09-4-2009)The Web Admin pages become dysfunctional after the router has been up 3-4 days displaying only a blank white page. Viewing the page source shows that the HTML is incomplete.I am not sure of the exact firmware version where this problem originates, I noticed it after flashing to 2.51.4 build 400 but cannot remember which version was running before the update. Just flashed to 2.51.4 build 600 last week hoping the new version had corrected the problem. Still broken.The router remains completely functional but the Web interface does not work correctly after 3-4 days.I have tried re-flashing the firmware and have gone as far as resetting the router both before and after the flash, even tried 30/30/30 resets but the problem with the Web interface remains.Re-booting the router every 3 days is not the best “solution” as my network is running DHCP. I would rather not fall back to older firmware as ver 2.51.4 build 400 corrected the DHCP errors on my Windows machines and decreased the initial connection time when machines boot up. I have read in this and other forums where others are having the same problem with this router/firmware but have been unable to find a working solution which leads me to believe the actual problem resides in the later firmware builds.
View 9 Replies View RelatedI changed the router's IP to 192.168.2.1 due to the same situation as this [URL] linksys and now I can't access my settings I have tried the both pips and nothing and I can't seem to get my linksys wrt54gs v7.2 to let two computers be on the internet at the same time both can be on the network but on one on the internet
View 6 Replies View RelatedMy computer is an XPS 360 with alot of upgrades. After looking at the specs of D-links routers I thought I give it a try. Hooked up, works like a dream. Couple months later my computer was saying I have "limited connectivity." All of the other computers have full access and works great. I tried going to my routers home page, but all I get is "The server at 192.168.0.1 is taking too long to respond." Ive tried renewing the ipconfig, restarting everything, new cables....everything I can imagine. I tried calling my ISP and they told me it wasnt there fault, that its pretty much on my end. I called Dell for support, said my warranty went out and they cant do a thing.
View 14 Replies View Related