I have a wrt54g Linksys router, and recently whenever I type 192.168.1.1 into the internet in order to access the settings/homepage, I get " internet cannot display this webpage"
View 2 RepliesI'm just trying to port forward with this router, and after I'm done entering all my settings, I click save settings, it tells me settings are successful.
But the it goes back to the port forwarding page and all the stuff is at default again as if I didn't make any changes. What the hell is this?
I'm sure it's just a little something I don't know about that's making it not save any changes to port forwarding.
I have a WRT54G router and for some reason I'm unable to receive the media stream at my home, but when I connected to my friends N-type router it works fine. I have no other connectivity issues. The only thing that I remember doing that may have caused this was to upgrade my firmware because my droid phone wouldn't connect.
View 8 Replies View RelatedI suddenly am unable to print the settings on the My Network Settings. When I click on the print sign nothing happens - it does not register on my printer. I used to be able to do this. My router is WRT54G and my printer is HP Officejet J3680 All- in-One.
View 1 Replies View RelatedI changed the router's IP to 192.168.2.1 due to the same situation as this [URL] linksys and now I can't access my settings I have tried the both pips and nothing and I can't seem to get my linksys wrt54gs v7.2 to let two computers be on the internet at the same time both can be on the network but on one on the internet
View 6 Replies View RelatedIt's about a Linksys WRT54G with Firmware: DD-WRT v23 SP2 (09/15/06) std it started resetting it's admin panel settings once every few months, lately it does that every few days, like name of LAN network, name encryption and password of the wireless AP, IP filter setting and so on
View 5 Replies View RelatedI just purchased an E2500 wireless router. I put the Cisco Connect setup disc in and it could not find my router. With excellent Tech Support, I got it to work. I still do not have any Cisco Connect software on my PC to set passwords or preferences. If I try to run the disc again, it gives me a system critical error and shuts down my computer. How can I get software to access my router settings?
View 1 Replies View RelatedI installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
running linksys wrt54g wireless router to two towers and 1 laptop----had short power outage after which i lost connection to router only on one tower---other tower and laptop were unaffected----had green indicator lights for positions 1 and 2 hard wire connected towers before outage---now only position 2----looking for reasons why I lost number 1 and thus connectivity to the router----have tried powering down router etc---but have not reset it---looking for more info first
View 1 Replies View RelatedMy wifi router, Linksys WRT54G v3.1 has been working fine till now. Suddenly my laptop stopped receiving wifi signal. I am unable to access the set up page via 192.168.1.1 either from my laptop or from my desktop that is connected to the modem via the router. I reset the router as well but no luck.
View 5 Replies View RelatedHave a PS3 that will connect to my wrt120n if I unplug the modem and router then plug back in after 2 minutes. if I shut off my PS3 or after approx 1 hour, PS3 drops my connection. I'm trying to access my router page online but after entering the default into my browser, the pop up box will not accept any combo of entries to allow me access. I have an SSID name and my router is password protected. It does not connect me when I use any combo of user name or password or the default "admin".
View 2 Replies View Relatedjust set up my EA6500 in bridge mode, i have the Ethernet cable plugged into the EA6500's yellow WAN port, is that correct, Cisco Article ID: 24583 is not that clear, Cannot also seem to access the EA6500's settings to setup security?
View 2 Replies View RelatedI entered some QoS settings and now when I load the QoS page I get this Javascript error message in Firefox.Error: missing ) after argument list Source File: [URL]. Line: 100, Column: 47 Source Code: QosList[0] = new QosEntry('0','3','0','Kathy's Mac','3', infor);
Basically, the Javascript chokes on any computer name that you enter that has an apostrophe in it. As a result, I don't have access to add or edit any settings on that page. Seems like a major rookie mistake, especially for a major network device manufacture.
So, I restarted my linksys router (WRT54G model) yesterday because of some issues I was having. Right now, I have full bars for connectivity on all my devices (Acer Aspire laptop running Windows 7 starter) when the Ethernet cord is connected from the modem to the router, but I have no internet access. Only when my laptop is connected directly to the modem, I have access to the internet (but ofcourse no wireless).
View 1 Replies View RelatedI had my router settings in a file on my hard drive so I would not lose them. Just my luck, my hard drive took a giant dump and the restore did not restore 100% and guess which file was among the missing?So I've followed about 15 different "reset" instructions which includes holding the reset button for 10-60 seconds; unplugging the router afterwards for anywhere from immediate to 60 seconds. Obviously, none of those sets of "sage" advice had any influence whatsoever on my router. My "server" is of my own creation:
Core2 Quad Q9550;
8 GB PC28500;
Gigabyte GA-EP45-UD3R;
Windows 7 Ultimate 64 bit SP1.
Cable Modem RCA DCM425.
My own sites were down & I can't view them on my computer now.This is the 2nd time this has happened to me with router WRT54G.Every time there's a problem with my hosting company & my sites go down, my router blocks them once the sites are back up & running.When I plug directly into the modem I can access them, but then I can't use my phone, etc.I've recycled & I keep trying to find how you save your settings on your router so I can do a cold reboot, but I can't find the instructions anywhere.Why does it keep doing this & how to save the settings & restore them.
View 2 Replies View RelatedI am using a newer wireless router but would like to use my older wrt54g router as an access point (wired and wireless) at the other end of my house. how to do it, and what the specific settings should be, especially the security settings. I can connect the wrt54g via a homeplug (cannot run a LAN cable). I had previously tried an Aztech wireless homeplug but found the security feature to be worthless and everyone was able to "break-in".
View 3 Replies View RelatedI can't access the router through the IP within the browser. It's an older WRT54G. I've never used the downloaded software that allows you to connect to it, but that's what I was going to try.
View 1 Replies View RelatedI have a E4200 as well as a WRT54G. I'm looking to create two different access points to the same network, one access point being 802.11g (WRT54G) and the other being 802.11n (E4200) I want to do this because I need the extra speed from 802.11n for streaming video to my consoles. The problem is that there are multiple devices that only reach up to 802.11g. Would it be possible to plug the WRT54G into the E4200 in order to give a second access point (probably with different SSID) so that 802.11g devices can connect to the network, without having to destroy my 802.11n network? The WRT54G is currently running DD-WRT.
View 3 Replies View Relatedwrt54g wireless router so we could get Netflix through our Wii. I have a one year old Compaq and am running Windows 7 with a wireless Internet connection through my service provider. I installed the router with no problems and was able to get online with the Wii. However, I am no longer able to get Internet access on my desktop. It shows that my Internet is connected, but it shows "No Network Access". I had gotten on fine at first, then I went to the 192.168.1.1 site to configure my data. I changed my time zone and then went to secure my connection. I cannot remember the exact option I chose, but I think it was something like WAP2 Personal. As soon as I selected that the screen froze and I can no longer access that site or get online through the router.
View 3 Replies View RelatedI upgraded my wrt54g v.2 with a firmware for wrt54gl and now, the power light is continuous blinking and I can't access via web to the device.I tried to reset it and replace the firmware without success.
View 3 Replies View RelatedI can't access a particular website with my Linksys WRT54g router in line, but can do so if I hook my mac directly to the ISP's modem. I have checked the firmware of the router and it is up to date. This is happening with only one website. It happens on multiple browsers. Using an imac with OSX 10.8.
View 4 Replies View RelatedI just got a Linksys router from a moving neighbor. The router is a Linksys WRT54G v5. She didn't have the power adaptor, so I found one that is 12VDC 500mA and it works. The factory resetted the device. I always get a signal, but it has that little error sign on it. It says my internet connection is broken. I believe this is caused by a bad ethernet port, but I have gotten into the internet sometimes. I have another router but it doesn't work either. On the other router I get a signal that as no error sign and says "Internet Access" but I still cannot access the internet. My laptop's network card works.
View 2 Replies View Relatedtarget 192.168.0.21following are rules of access restriction on WRT54G1.rule A- 07:00am~10:00am,internet access allowed, keyword blocked such as Facebook,mail.2.rule B- 10:05am~10:00am,internet access allowed, no keyword blocked.but 192.168.0.21 fails to access internet after rule A expired.
View 1 Replies View RelatedI'm using a Linksys WRT54G in my home and I have it set up to allow me to connect remotely (VPN and RDP) from work. I do this every day and it works perfectly. The problem I'm having, though, is that every morning it doesn't work until my wife wakes up her laptop. After that it works fine, whether her laptop is on or off. It behaves as if the router is "asleep," and when she generates some local network activity, it wakes up, thus allowing me remote access.
I believe it's a router issue and not a computer issue because not only does it affect VPN and RDP, but even the router's remote management interface is unavailable until this happens.
Some more details about my home setup. I have a fixed IP address assigned to me by my ISP . All computers connect to the router wireless VPN and RDP is routed to a desktop computer running XP SP3 that is always on (it never goes to sleep or hibernates)The router is enabled as a DHCP server (192.168.0.2 thru 11)The desktop computer is set up with a fixed IP address (192.168.0.100)The router is set up to forward VPN and RDP traffic to the desktop . Here's some screenshots that may be useful.
Basic Setup Port Range Forward Management
Pretty much every other setting is defaulted. Like I said at the start, my setup works perfectly and I'm very happy with it. I just can't figure out why every morning it doesn't work until my wife uses her laptop?
When I'm at work, hers is the only computer on the local network getting assigned an IP by the router. Until she turns on her laptop, the DHCP client list is empty. Could it be that the router needs at least one connected device assigned an IP by its DHCP service in order for it to receive external connections?
Is there a way to restrict wireless access to my router from wireless pc's in my home. Two grandsons are off from school now, and are playing online games to the wee hours of the morning. Can I do something to have the routher shut off their connection at a certain time? Is that possible. If I have to go back to dd-wrt to do that, fine. I have lynksis wrt54g with their 4.2.1 firmware.
View 5 Replies View RelatedI need to make my WRT54G an access point only. I tried information contained on Linksys site, but I can't seem to get it to work.
View 9 Replies View RelatedHow to setup WRT54G in router mode
View 9 Replies View RelatedI am trying to get a cell phone to have access to my LAN from 3am to 7am. I gave the policy a name, allowed access, checked everyday and the time 3a to 7a. Under edit list of PCs, I entered the MAC address of the phone, and I have also entered the MAC address of the phone on the wireless>edit mac filter list, though didn't know if I should.
View 2 Replies View RelatedI keep trying to set access restrictions for my wrt54g router for time. There is no 12 for time so I'm selecting 11:55 pm to 6am but I keep getting an error message of, "end time must be bigger then begin time." I get this no matter if I select 9pm, 10pm, etc.
View 3 Replies View RelatedI have a WRT54G router that I have not used for many years, but now I need to use it again. I have connected it between my modem and PC, and I am able to get an internet connection on the PC, but I am unable to connect to the router's configuration page. I have tried resetting the router numerous times (holding the reset button 5 seconds, 10 seconds, even longer) to reset the IP address to the default 192.168.1.1 address, but still cannot access the page. The power LED is on and the WLAN and Internet LEDs are on, and the LED for the port my PC is connected to is on. The hardware version of the router is v3. I tried downloading the latest firmware, but without being anble to communicate with the router at the IP address I cannot update the firmware. How can I go about connectiong to the router's setup page? When using ipconfig, the Default Gateway appears to still point to my ISP's IP address instead of the router's.
View 9 Replies View RelatedI'm unable to access my linksys wireless g broadband router (WRT54G)'s access gateway. (192.168.1.1)The gateway page doesn't load, at all. It doesn't ask for the user or password at all. On any of my internet browsers (firefox, and internet explorer)Anyway of fixing this would be appropriate.
View 2 Replies View RelatedWe have a WRT54G (hardware v6) which we have used for a couple years in conjunction with a cable modem to make a home wifi network. In the past few days, we've been unable to access any sites in the IP range 130.160.x.x (that is, those at The University of Alabama). A particular example is ua.edu (130.160.4.131). The rest of the internet works fine.This is on Ubuntu 12.04, Windows 7, or Android ICS; with Chrome, Firefox, IE9, or SSH. If I connect the modem to an Ubuntu laptop directly by USB, I can get to ua.edu just fine.
I tried resetting the router to factory defaults, upgrading the firmware, connecting via ethernet rather than wifi, and using the Google DNS servers 8.8.8.8 and 8.8.4.4 in the router, but the problem persists. Naturally, UA's helpdesk, Comcast, and Linksys were all either useless or uncooperative. [code]