D-Link DIR-655 :: Cannot Access Remote Management Screen Via IP
Apr 26, 2010
I am having trouble accessing my DIR-655 remote management screen via ip to my network.To make sure i didnt have any odd settings, i did a hard reset on my router first.I then enabled remote management, and left the default port 8080 I try to access viw the ip address on my status page suffixed by the port 8080 [URL] page cannot be found.I then enabled https and tried to access via:[URL]page cannot be found.I then setup a entry in the virtual server to redirect http requests to my workstation hosting IIS7, if i connect to localhost, the iis welcome screen appears, but if i browse to my ip, i get nothing.I am using Cox residential service, i called them and they informed me that they do not filter or block requests in any way.
View 12 Replies
ADVERTISEMENT
Aug 28, 2011
My first try at configuring my RV042 has had unexpected results. I set a WAN and LAN address, but did not enable remote managment and did not configure any port forwarding. I expected to be able to connect to the router on the LAN and I could. The surprise came when I put in my web address. I got a router login page. How do I suppress than on the WAN side. I have a static address with my ISP.
View 1 Replies
View Related
Feb 10, 2013
Ive formatted the sd card, enabled video/image recording, but no files show up on the sd management screen. I tried to select a folder to save the files to from the live video screen, but nothing pops up/opens when I click on the folder button. I'm using the google chrome browser w the latest java update on an xp box.
View 4 Replies
View Related
Mar 1, 2011
I can access the admin pages from inside the network.I can access the admin pages remotely from my iphone (safari).If I try and access them from my PC at work (IE6 or Google Chrome), I can access the router, give the password and get the status screen. But if I try and go to any other page on the router, it asks for the password again and takes me back to the status screen.I have Hardware B1 and firmware 2.0 (not upgraded it yet).
View 1 Replies
View Related
May 21, 2012
I have a remote ASA5505 running 8.4(3) with a working site 2 site VPN tunnel to my main office. (The main office is running an ASA 5510 with OS 8.4.3 as well). The encryption domain is all private IP on main site vs. 172.16.10.0/23 on remote site.
Relevant config of the remote ASA:
interface Vlan1
nameif inside
security-level 100
[Code].....
I can manage the ASA on the outside interface (outside of the site 2 site VPN) using the TACACS credentials I can also ping my management station from the ASA using the inside interface, but as stated, the other way around does not work. I have not yet tested if management from the local 172.16.10.0/23 subnet works, but I will try this next.
View 5 Replies
View Related
Sep 12, 2011
set up a wireless network connection? i have a wireless router but cannot access it using my browser?
View 3 Replies
View Related
Sep 12, 2011
Set up a wireless network connection? i have a wireless router but cannot access it using my browser?
View 1 Replies
View Related
Feb 25, 2013
Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : TM
The Remote Management Port is not working correctly. For whatever port I set, it will uses port 80 to access.
View 2 Replies
View Related
Nov 30, 2011
I have a Netgear WNDR3300 Dual-Band and is setup to use both 2.4Ghz and 5Ghz to achieve 300 Mbps connection.
On the DAP-1522, I use IE (not Firefox or Chrome) for configuration as follow:
- IP address: STATIC
- Wireless config: using Wizard
- Wireless security: WPA2 / AES
- Mac Cloning: disabled
I tested this by connecting a Windows 7 desktop AND laptop via Ethernet cable and both laptop can obtain IP address dynamically, so my DAP-1522 is talking to the WNDR3300 (it has DHCP). Both Win 7 machines can also access the Internet.The problem is, I can NO LONGER access DAP-1522 admin screen, even by typing the static IP address assigned to it. The ONLY way I can re-access it is:
a). Reset DAP-1522
b). Shutdown the WNDR3300 wireless router, assign a static IP to the laptop, connect via cable to DAP-1522
View 3 Replies
View Related
Jan 4, 2012
how to setup remote management...
View 4 Replies
View Related
Apr 20, 2012
I have multiple remote sites connected back into my infrastructure via satellite. I'm building a GRE tunnel accross this satellite infrustructure to my user's routers. I'm using EIGRP through these tunnels and everything is working great as far as connectivity to my users is concerned. However, with each of these packages, I would like to be able to remotely manage the satellite modem. My problem is that these modems all have the same web management IP address (192.168.1.1:80) and I can't change them. I thought to myself, "too easy, this sounds like an excellant case for NAT!" Either I'm tackling this thing all wrong or something because I can't seem to get it to work. Here is what I've so far (IPs modified and extra info cut[CODE]
View 3 Replies
View Related
Dec 5, 2011
Any possibility remotely manage cisco 876? Remotelly I mean by connecting to WAN IP (DSL interface) from outside. It could be via CCP, telnet or ssh doesn't matter.
View 4 Replies
View Related
Mar 29, 2012
I do have problems with remote management of a Wireless Accespoint WAP200.The WAP200 is connected to a router RVS4000 and works well..There are several nodes in the LAN, all static IP, all forwarded in the RVS4000..All nodes can be managed in the LAN as well as from outside..Exept the WAP200, from inside in LAN no problem, but from outside gives a 404 return.I build other similar LAN's, but the same, no connection.
View 8 Replies
View Related
Oct 8, 2011
I have set up an access point as per the instructions I found on this site. It works perfectly, holds a wireless signal fine. Now, I have the challenge of trying to remote connect to the home computer that is connected to this access point. I have absolutely no clue as to what changes in settings have to be made.
View 4 Replies
View Related
Aug 24, 2011
I recently purchased a 825 and a WD Mybook Live. I have been going back and forth on the WD board trying to resolve a remote access issue with the mybook and I am being told to do some settings in the router and I am not sure I have dine them correctly> It has not resolved the issue but I would like to make sure I am correct before I claim its not a good fix. The mybook is connected into a network port on the router which is connected to a High Speed modem and then out to the internet. Initially I was told to enable UPnP on the 825, which was already enabled. Then this is what I was told to do by a WD tech. You could try assigning a static IP to the My Book Live, then making sure ports 80 and 443 are assigned to that IP on your router. It is possible that something else is taking one of these ports. We use uPnP to try to open up these ports, and if it fails, we resort to relay mode. In the future, we will allow you to set these ports within the My Book Live to other than 80 and 443.
View 7 Replies
View Related
Oct 4, 2011
i have a WD My Book Live and it's connected to my DIR-825. i'd like to configure the router to allow FTP access to the NAS from the internet. the drive has an option to enable FTP in it's configuration, but i have not done this before and i don't know what to do to create a solid/secure FTP portal so that i can access my files remotely.how do i configure the router for this ? my router is set to DHCP and i have turned MAC filtering on.. in particular i am looking for the ability to transfer/copy files from the drive, and not allow any modification/writing to the drive from the outside.
View 10 Replies
View Related
Dec 22, 2011
I opened the remote management to my Dir 655 but i can't enter it I tried to change port it didn't work, tried to factory defaults or hard reset didn't work what can i do I think it all so stuck my access to my remote desktop (not sure)
View 3 Replies
View Related
Mar 30, 2012
I have a small issue with Remote Management on my E4200v2.I have enabled it , select https and set Allowed Remote IP Address to any on the default port ( 8080 ).After all of this, I cannot connect to my router from my office or any other place. I'm using DDNS and all its ok ( updated at time ). I've tried also connecting to my direct ip address ( dynamic ) but with no result.P.S. no incoming log from port 443 using https.
View 3 Replies
View Related
Aug 22, 2012
unresponsive / lockups with Cisco ASA 5505 remote management ?
I think it happens like this:
1) With ASDM (Java Web Start), add new crypto map (it could be anything, just happens to be what i added the last time this happened)
2) Click apply
3) ASDM hangs (at this point the Java client becomes entirely unresponsive)
4) ASDM.jnlp refuses to connect and eventually timeout dialog appears. However, VPN connections are still accepted.
5) After a few hours (over night), the ASA refuses all incoming traffic including VPN connections.
View 5 Replies
View Related
Mar 21, 2012
I'm attempting to configure remote management (and, sometime soon, SNMP) for a newly-deployed WRVS4400N v.2.At the Basic Settings page, I enabled Remote Management, and left the port # at the default. Remotely I entered the public (static) IP for the router in the address bar of IE8 similar to this: 67.203.???.??:8080. IE8's response is, "The webpage cannot be displayed." I'm using a public wi-fi access point, and don't know how the local router is configured, so it's possible that the local router has a blocking rule in the firewall.I'll try again using another remote router that I manage.
View 3 Replies
View Related
Jun 30, 2011
I'm have serveral issues with my router.First, using port 8090, I'm unagle to get remote management of the router.Port 8090 is forwarded to the router 192.168.1.10 I have other issues too, I think the router is blocking my FTP conenction to my NDAS drives.I wish the router would show the UPnP port that are autoamtically added t othe system.Port 80 works well going to my NDAS drives.Firewall, DoS Blocking WAN are all turned off.
View 4 Replies
View Related
Apr 11, 2013
I have a brand new RV042 v3 that I just updated to the latest firmware (v4.2.1.02) and have stumbled across an anomaly... I can only access the router from the WAN port using port 80. I happen to have it set to port 8080, but that doesn't work; I have to use standard port 80.
I have two other RV042 units running older firmware and they work as expected and follow the port that is filled in. This one has me puzzled and wondering if this is a bug in the firmware.
View 2 Replies
View Related
Mar 4, 2012
I am having cisco 2911-sec-k9 router.
And I got 2 internet connections from isp one is static ip leased line and the other one i dsl dynamic ip one.
What I want is i need to configure internet load balance between these 2 internet and also i need to use static ip for remote access vpna and for my exchange port forwarding.
My dsl line in 100 mps and my leased line 2mb dedicated.
I configured the router as with some example config i got on internet my internet is fine but load balancing not happening and i configured the REMOTE ACCESS VPN . I am able to connect the remote access vpn but no communication through remote access . i cannot reach any device through remote access.
Note: if load balancing is not possible how i can configure for internet traffic use dsl line and for remote access vpn and live exchange port forwarding through leased line.
I am attaching my configuration and also debug crypto isakmp status
View 1 Replies
View Related
Aug 25, 2012
I want to be able to login to a router remotely and foward a port on the router. I thought i saw a spot for remote management but don't know how to use it. I have a dyn account and can create a dns for it.
i setup security dvrs on the internet so clients can see cameras from outside their homes. I would like to be able to login to a router if i need to foward a port or something similar.
View 1 Replies
View Related
Sep 17, 2012
I have a RV082.I need to disable the firewall, since firewalling is done better elsewhere.However disabling firewall Remote management on wan ip is forcefully enabled.I don't need Remote management, keeping it enabled is a security risk for my setup.I don't understand the rationale behind the choice to forcefully enable remote management if firewall is disabled.Is there a way to disable both firewall and remote management?Or at least a workaround?
I'm on firmware 2.0.0.19-tm on a probably v2 hardware. (Cannot find this info in the web configuration).This is not the newest even for v2 hw but I cannot afford to break it trying to upgrade the firmware.Moreover no release notes for firmware releases refers to a correction of firewall/remote management behavior.Is this behavior also in newer firmware releases?
View 2 Replies
View Related
Oct 22, 2009
After I change my router, I recently found out that I cannot access remote network resources after VPN tunnel is established. I use CISCO System VPN client. I can see the connection is successful. I cannot ping server on the remote network
View 2 Replies
View Related
May 16, 2013
I currently have ipV4 as the setting on my DIR-825. Other posts seem to want ipV6 which is more secure but is not possible with a DIR-825 Rev A1. I have two routers, a primary router (DIR-825 Rev B1) capable of ipV6 and a secondary router (DIR-825 Rev A1). If I implement ipV6 on the Rev B1 router but keep ipV4 on the secondary router, will this improve the security, or will it just mess things up so nothing works?Certain devices (cell phones and most Tablets) don't deal with ipV6 very well at all. The ones I have tested flat don't connect to the wireless network if the router is set at ipV6. Is ipV4 adequate for a Home/Small Business Network when trying to implement Remote Access and VPN?
View 2 Replies
View Related
Dec 5, 2012
Region : Ireland
Model : TL-WR740N
Hardware Version : V1
Firmware Version :
ISP :
I am trying to setup my DVR for remote access but my public IP and the routers WAN are not the same?
View 4 Replies
View Related
Aug 21, 2012
I am using a Mac and would like to view the live feed full screen. Is this possible?
View 3 Replies
View Related
May 24, 2011
I am looking to permanently reset the default remote management port of the MODEM DPC3825 to something other than 8080. how to PERMANENTLY change the port from 8080? In the web interface under administration I have several times set it to something else other than the defaulted 8080 but when the modem is rebooted or reset, it goes back to the default 8080.
View 4 Replies
View Related
Nov 5, 2011
The downloadable PDF manual for the WAG160N shows the remote management address as "https://...", while the online support article shows WAG320N screenshots and uses "http://...". The downloadable manuals for the WAG120N & WAG320N don't show either (it's a pretty flimsy manual).point me to, a definitive list of model/firmware combos which do support SSL for remote management?
View 3 Replies
View Related
Nov 20, 2011
My University has free Internet at student homes, but we need to login by PPTP to get an official, public IPv4 and be able to reach the outside world. The network people at the University says that when the PPTP is up, everything should be open (no firewall of any kind).
have my WRT160NL that gets a 10.10.73.0/23 address from DHCP on WAN port. Currently I have 10.10.74.21. My internal network uses 172.17.17.0/24.My PPTP-server is located at 10.192.1.1 and when I connect, I usually get an IP in the 158.37.73.0/24-range. Currently I have 158.37.73.28. I use DynDNS to make sure I always know the public IP by the host binders.dyndns.info ...
So, I have Remote management enabled with HTTP and HTTPS, any IP and default port 8080. But no response from the outside world seems to go through.If I turn of the "filter ICMP" but keep the SPI Firewall on, I get ping reply from external sources towards my router, but still no HTTP or HTTPS response.I also have a Torrent I try to port forward to to be active, this is 23277, and this is the only thing that keeps coming up in the incoming log on my router.
It's not possible to connect to the routers management over the PPTP-tunnel?And why can't I get the port forward to work .. Same reason? PPTP 158.37.73.28 -> 172.17.17.100 (LAN) won't work?
View 1 Replies
View Related
Nov 24, 2011
i was connected to my rv042 via remote management / browser, and tried to add vpn clients. i generated a new certificate and then i clicked on export for clients. by doing this, the remote management disconnected and i cannot access the router anymore.
how can i get the new .pem file from remote? do i have to make somebody turn off and on the unit to get back remote access??
p.s.: after turning off an on i tried the same steps again: everytime i click on "export for admin" or "export for client", this kills the remote management and the unit must be hardreset. now: how do i get the newly created client certificate off that unit ?? otherwise i will have to drive 350 km just to grep that file ?!?!
View 1 Replies
View Related