Ive formatted the sd card, enabled video/image recording, but no files show up on the sd management screen. I tried to select a folder to save the files to from the live video screen, but nothing pops up/opens when I click on the folder button. I'm using the google chrome browser w the latest java update on an xp box.
View 4 RepliesI am thinking of buying the DSC-942L, I already have "2" DSC-932L. I wanted to put it in my front door and set it up so it record to mine SD card 24x7. My questions are, when the SD card get full, does it overwrite the old files?
View 1 Replies View RelatedI have just installed two DCS-942L cameras and uses MyDlink. The live video is OK from MyDlink, but when I log on to the cameras from "Advanced Settings" the live video is just a black screen, no matter what video profile I select. Like wise I can't select motion detect area, because there is just a black screen.I have tried on tree different computers. What can be wrong?
View 7 Replies View RelatedI record videos after motion detection on the cameras sd-card. Is there a way to copy all the files from sd-card to the pc? I wasn't able to copy them with the web-interface. I don't just want to delete the videos from time to time. I also want to archive them local.
View 3 Replies View RelatedI am having trouble accessing my DIR-655 remote management screen via ip to my network.To make sure i didnt have any odd settings, i did a hard reset on my router first.I then enabled remote management, and left the default port 8080 I try to access viw the ip address on my status page suffixed by the port 8080 [URL] page cannot be found.I then enabled https and tried to access via:[URL]page cannot be found.I then setup a entry in the virtual server to redirect http requests to my workstation hosting IIS7, if i connect to localhost, the iis welcome screen appears, but if i browse to my ip, i get nothing.I am using Cox residential service, i called them and they informed me that they do not filter or block requests in any way.
View 12 Replies View RelatedI have a DCS 3420 that is connected via CAT5 to may LAN and 2days ago something happened on the laptop, whenever I open the window in internet explorer on Win XP Pro; the camera just show a black screen.If I use any other computer on my LAN I get a clear picture of the Gate that the camera is focused on...I have checked the laptop drivers and updates but ca not see something wrong.
View 1 Replies View Relatedi bought wireless camera dcs942l everything works but my sd card 32 gb is not recording the camera is not recording in my sd card i formated sd card still not recording camera works good quality picture network working but not recording on my sd card and i can not record in my computer
View 5 Replies View RelatedMy DCS-942 is doing everything quite well, except when an SD card is inserted. When connected to the network via ethernet, everything works well. I can set detection zones with snapshot or video modes and it does what I want it to do, however, as soon as I remove the ethernet cable and wish to use the camera over wireless, the unit fails to work at all (red light illuminated). If I then remove the SD card, it will work over wireless again with all the capability except for SD oriented operations. I have performed several hard resets and formatted the card with no success.
View 2 Replies View RelatedI can't get the Video to record to the SD card, nothing happens. Snapshots record fine.
Firmware is 1.01
Is it necessary to remove the card from the camera to manage (view, edit, delete) the recordings?
View 2 Replies View RelatedIt didn't fill it up completely, it stopped at the 200 meg free mark, however I have cyclic checked (which btw is not mentioned anywhere in the manual). I assumed this option would cycle by deleting the oldest file to continue recording.
View 1 Replies View RelatedI have my 942L set up for continuous recording. When I look at the files, the camera will record between 20 and 55 seconds, end that file and start another. The next file then starts between a few seconds and as much as 40 seconds later leaving a gap in the video recoding. The file sizes are all different and the amount of record time is different for each file.
Also, about 80% of the time, the time increments a few seconds on a playback and then stops updating even though the video is longer.
I just got the camera today, looks good, works good, at least so far.. BUT I was SURE this camera had a battery and charge function!? What's the point of having this camera if I can't place it say inside my car or in the garage (where it needs to be hidden, alas I can't use any cords!)?
View 5 Replies View RelatedI have a cisco 1760 with running VIC-2FXO (working fine). I'm now trying to replace that line with an ISDN line through a VIC2-2BRI.
View 4 Replies View RelatedMy first try at configuring my RV042 has had unexpected results. I set a WAN and LAN address, but did not enable remote managment and did not configure any port forwarding. I expected to be able to connect to the router on the LAN and I could. The surprise came when I put in my web address. I got a router login page. How do I suppress than on the WAN side. I have a static address with my ISP.
View 1 Replies View RelatedI'm using a 8GB flash disk formatted as FAT32, under OSX when I copy a 1.51 GB file to the flash drive it completes but the file will not appear in Finder?? I thought this problem was fixed in 1.0.04 firmware??So when I load up a Window 7 PC and access the storage device, I see the file but it's only being reported as 4KB?FAT32 file size limit is 4GB so what the heck is going on with this router? Clearly the E3000 seems to have continued problems with OSX. Doesn't appear to be any fix now or in the near future?
View 1 Replies View RelatedI would like to know if there's a way to show Current-Utilization percentage within the messages generated by the Fault Management Module in LMS 4.0 [code] As you can see above CurrentUtilization percentage is not shown in Event Description section.
View 2 Replies View RelatedI have 1.00 build 0522 and searching the support website I see no link. But reading here I see there is a later version.
View 1 Replies View RelatedI would want to create an inband management (in case of we are a issue on OOB mgmt, i means to have a 2960 HS) on Nx7010 chassis without M1 card (only F1 cards - layer 2). I could create a interfce vlan but the status of the interface is down/down.
I have an other 2 x Nx7010 pair with M1 card ; for this pair, i can connect the interface ; the inband interfaces is up/up.I have also 2 x Nx5596 pair ; for these boxes, i can connect the interface ; the inband interfaces is up/up.Do you know a solution to get 1 interface vlan up/up on chassis 7010 without M1 card in order to have an inband connexion ?
I have this card installed onmy 3845 running version 12.4(18). But this card fails to show up.
here is what I found in a show tech.
WIC Slot 0:
Unknown WAN daughter card
WIC module not supported/disabled in this slot
Hardware Revision : 2.0
Top Assy. Part Number : 800-27738-02
Part Number : 73-10677-02
Board Revision : B0
Deviation Number : 0
Fab Version : 02
PCB Serial Number : FOC********
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : HWIC-2FE
Version Identifier : V01
CLEI Code : COUIAFUCAA
Base MAC Address : 001a.6c70.260b
MAC Address block size : 2
Connector Type : 01
EEPROM format version 4
EEPROM contents (hex):(code)
The company has a glitch that they are not sure if they will fix so you can't record with mac. I am unable to return my cameras to staples and Im out the money for the memory cards I opened. It says you can record with MAC clearly on the box!!!! Bad business practice for STAPLES and DLINK.
View 3 Replies View Relatediphone and android app but no blackberry.
View 3 Replies View RelatedI just purchased 2 cameras and have one set up.
Firmware V 1.12
Works great on my android phone and connects fairly quick. When I try to see the camera image on my PC with windows 7 64 bit, I log into my d-link and it shows the camera name on left side of screen, then says Java run time environment not installed.I uninstalled java 5 times and re installed both 32 and 64 bit but keeps coming back as not installed. Camera is set up wirelessly through a Belkin router, so far no EZ config
Is there such a possibility in the firmware or through telnet?
View 3 Replies View RelatedAs DCS-942L IP cam is compatible with "NVSCGI APIs" (search this string on a search engine and you will find some useful PDF docs), many features of this IP Cam may be enabled or disabled using any web browsers, for example we can manage the motion detect.
[url]....
I just bought new 942L (HW Rev3, 1.12 FW) and the only profile which is used to stream to iPhone or Web browser in mydlink is profile 3 which is limited to JPEG. Is there some way how to change the profile to be used for streams or is there a way how to make to profile 3 something else then JPEG?
View 1 Replies View RelatedI have 3 DCS cameras on my network all setup WiFi
2 are DCS-932L and 1 DCS-942L
The DCS942 (which is right near but facing the other direction) is about 2 meters away from one of the 932's but the 942 keeps going offline - it comes back on and off probably 4-5 time during a 24hr period.
This is most frustrating - it would look like Wifi signal strength could be the issue but the other 932 right near it doesn't have this issue?
I initially set it up for static IP, which was a mistake for reasons I probably don't need to go into here. Having recognized my mistake, I've been trying to hard reset it so I can convince it to acquire its IP address by DHCP, but each time I reset it and return to the "First, select your camera" screen in the setup wizard, I'm faced with a single choice: the device as I first set it up for static IP. I don't seem to be able to convince it to give up that erroneous static IP address.I have read the FAQ section on hard reset. I've held down the reset button for a lot longer than 6 seconds while the cam was connected to power and ethernet, and I've watched it go through the sequence of flashing blue reset and WPS lights until it settles down, but this doesn't change the situation, evidently.
View 7 Replies View RelatedMy DCS-942L is almost always in night mode with IR on resulting in a B/W picture. Only when the light is very bright it changes to day mode. How to adjust the day/night threshold?
View 11 Replies View RelatedI'm trying to connect to the camera DCS-942L through the Rtsp Protocol.
Link do this : [URL]
But the video signal no. Tried different players. Players determine the model of the camera , but no image and after a couple of minutes is open. What I'm not doing all right?" My link has the correct view ?
Any replacement bracket or some other way to easily mount the 942l in a window? i have a long window next to my front door i want to just stick this someone about shoulder high in that window looking right to the door so will see anyone who comes.
View 5 Replies View RelatedMy Dlink DCS-942Ls had been updated to the latest firmware both 1.12.1608WW and 1.12.1628EU. (I grouped them into two firmware devices). They are all H/W version A1, agent version 2.0.15-b11. If I setup time to automatic time configuration and sync with NTP servers ( all from drop down list and Thailand NTP server time1.nimt.or.th) , they did not work and I must set time manually every times I power off and on these IP cameras. I knew that this issues has been raised for long times and still exist in the current firmware.Simple way to eliminate this problem is specifying NTP server into IP number. ping your national NTP server URL and then get the IP address , e.g. time1.nimt.or.th has IP 203.185.69.60 , or ntp1.dlink.com has IP 61.67.210.241. I have tested many ways and the results can be comfirmed that URL NTP letter cannot sync time but IP number can do. I also has a DAP-1360 Repeater mode and test with its "System Check" ping test, the result are success either URL NTP server name and IP number. NTP protocol is different to ping test. I'm not sure that which parties (ISP, DNS, Router, IP camera device) should fix this error. I decided to specify NTP server with IP number to all network devices from D-Link. Minor risk may occur if a national NTP server change its IP number.
View 1 Replies View Relatedset up a wireless network connection? i have a wireless router but cannot access it using my browser?
View 3 Replies View Related