TP-Link ADSL2+ Wireless :: TD-W8901G - Cannot Access Some Url
Jan 12, 2013
Region : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version :
problem with filtering
Region : Syria
Model : TD-W8901G
54Mbps wireless G ADSL2+:
I used the url filter utility inside the router program. I put some url for example www.google.com, I wanted to try the filtering cababilty, Later I deleted all these adresses , but unfortunatley it keeps telling me the following message: "The system returned: (110) Connection timed out The remote host or network may be down. Your cache administrator is webmaster@proxy1."
Region : Others Model : TD-W8901G Hardware Version : V6 Firmware Version : 6.0.0 Build 120213 Rel.30335 ISP : ETAPA
I am writing in from Cuenca, Ecuador. I have a TD-W8901G Wireless ADSL2+ Modem Router. I have accessed the interface using the default ip address:192.168.1.1.When I select Interface Setup from the menu, it only shows Internet and LAN as the only 2 options. Wireless is no longer there. It just disappeared! The LED indicator light for WLAN is also "OFF." When you try the Quick Start wizard guide, it cannot complete the setup because there is an IP address error.
I have changed the firmware 2x since, trying to remedy this, I have also tried factory resets at least 3x. Nothing has worked up to this point.
Region : India Model : TD-W8901G Hardware Version : V6 Firmware Version : 6.0.0 Build 120418 Rel.34102 ISP :
Everytime, I turn on the ADSL2+ wireless modem router, it connects to the internet and my laptop gets paired with the wireless network but after 30 mins time, wireless ADSL2+ router restarts itself and goins in a loop for nearly 5 times and then it gets connected to internet but then I cannot connect my laptop to the the router using wireless with error DHCP failed to assign IP but DHCP is enabled in the router. This has started since a month and I had tried several network change settings but nothing has given me a solution. I do use Kaspersky IS through which the connection flows in. My internet setting is set to use Automatic DNS discovery and most time, I get RC 102 DHCP error.
Model : TD-W8901G Hardware Version : V3 Firmware Version : 3.0.1 Build 100901 Rel.23594 ISP : Ttnet
My web browsing/surfing speed decreases when I'm transferring files between other computers which are connected to this modem, and when a torrent client is downloading from 20+ seeds. I want to give the HTTP connections (port 80) the highest priority possible, so that my connection wouldn't delay when non-HTTP connections are active.The interface of the modem related to QoS settings are as below:What QoS settings should I enter (what rule(s) should I define) for giving HTTP protocol higher priority?
Information about my environment:
Modem product ID: TP-LINK TD-8901G Modem firmware version: 3.0.1 Build 100901 Rel.23594 Modem hardware version: 3.1 My OS: Windows 7 Ultimate x64 SP1 My physical port: Enet1 (Eternet #1) My local IP: 192.168.1.2 My torrent port: 5002 IP of the computer I'm transferring files between: 192.168.1.4 Physical port of the computer I'm transferring files between: Enet 2 (Eternet #2)
I found out that I cant access my modem (TP-Link W8901G) config page at 192.168.1.1. I was pretty sure my ID and password is correct since I never changed them. It is also unlikely that the password got changed by other people who are stealing my Wi-Fi as I turned my WLAN on only when I requires the connection then it get turned off afterwards.
I have a TP link TD-W8901g modem router with 1 wan and 4 LAN. My questions is can i use this modem to receive wifi signals through wan and give out through lan. i currently use internet from telephone cable. But i have got a free hot spot near my home. Currently i Am using a pc without wireless card.
Region : UnitedKingdom Model : TD-W8951ND Hardware Version : V1 Firmware Version : Latest ISP :
In trying to make sure it was NOT wide open to the internet (amongst many other problems of setting it up, which I ,may address later if I can actually connect to the thing ever again) I told it to only accept connections from a range of address inside the LAN. Now it wont accept anything except telnet from the LAN.Short of wiping out 6 hours of trial and error configuration and resetting it, are there any other options I can exercise via the telnet interface?
Region : Others Model : TD-W8961ND Hardware Version : V3 Firmware Version : 3.0.0 ISP :
My router is TDW8961ND The firmware version is 3.0.0 The hardware version is 3.0
I am trying to have a virtual http server at port 80 but when I do this and save, I get this message: "Notice: The WAN HTTP port of CPE will be chaged to 8080 if submit successfully."Then after that I cannot access the server at port 80.
Region : UnitedKingdom Model : TD-W8961ND Hardware Version : Not Clear Firmware Version : V.3 ISP : ADSL24
Using windows 7 and 8 on different machines I am unable access my routers web based set up.
I enter the usual "admin" and password in the login box. 3 goes and then get error message. or hangs on waiting.(connected to the router with Ethernet Cable). Could this be a windows based problem. I think it was ok on XP but that is gone now. Router is working fine but I just cant access it to alter any settings.
My 2 other spare routers which are not TP-link also have the same problem.
Region : NewZealand Model : TD-W8960N Hardware Version : V3 Firmware Version : 1.4.0 Build 111130 Rel.56405n ISP :
Just installed my new 8960 and it's working fine. However, I'd like to disable admin access from wireless, and only have that available via the LAN. I can't find anything that looks like it'll do that in any of the setup pages, is it possible? All previous wireless routers I've had have been able to do this.
I'm expanding my home network and the adsl modem router supplied by my ISP has just 1 RJ-45 port and 1 usb port (and an RJ-11 for the Internet). I have zeroed in on TP-Link TD-W8901G having 4 RJ-45 ports, 1 USB port, 1 RJ-11 port and also it is a wireless router. Currently I would be connecting the above modem router to my desktop running Linux and using the same ISP with ADSL. Considering a future scenario where I may decide to use another way to connect to the Internet like maybe 3G or Cable, etc (with their separate modems) I was wondering if my same modem router (TD-W8901G) could be used as a standalone router for connecting the devices on my home network. Basically, what I want to know is whether this modem router would be able to share an Internet connection from some other source, other than the one provided through its own RJ-11 (ADSL) source?
Region : Portugal Model : TD-W8970 Hardware Version : V1 Firmware Version : ISP :
Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.
However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.
I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).
To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.
The router print server is a nice functionality and I really want to use it.
Region : UnitedKingdom Model : TD-W8968 Hardware Version : V1 Firmware Version : latest ISP : french orange
I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.
Region : Australia Model : TD-W8970 Hardware Version : V1 Firmware Version : ISP :
Im having issues setting up port forwarding with my Synology NAS.
My house is all connected via network cable, going to a main 24-port switch, which is connected to a Modem/Router (TP-LINK in this case). I can access the NAS from anywhere on my home network, send and receive is fine. I previously used a Billion modem/router in the same config and it all worked fine.
The problem is that when going through the Synology setup, it fails to see the tp-link. So therefore I cannot run its port forwarding program to setup all my ports. Which in turn the NAS can't access the internet. I have started going through the port-forward setting on the router interface, and manually entered the ports - i realized that I'm limited to the number of ports i'm allowed to open! I have also run a port testing program, some are successfully opened the others are not.
Is there some button i need to check or switch on the modem?
Region : Italy Model : TD-W8970 Hardware Version : V1 Firmware Version : TD-W8970_V1_130201
I just bought online a brand new TD-W8970 modem/router but I'm in trouble with getting ADSL working.I set up a PPPoE connection with the settings from my ISP but the ADSL Led on the device is solid OFF and in the Admin section it says DSL Status: Not Connected.
Region : UnitedKingdom Model : TD-W8970 Hardware Version : V1 Firmware Version : ISP : Virgin
I've just replaced my aging ZyXel Wireless Router with a TD-W8970 which connects to the internet with no problems whatsoever. However, I have an ethernet connected Western Digital MyBookLive NAS which is happily allocated an IP addess but does not show up on my network on my PC (Windows Vista - fully patched). A usb connected pen drive and exactly the same. Am I missing something blindingly obvious? On the ZyXel the NAS worked with no problems whatsoever.
The problem with the NAS was my internet security Bitdefender. For some reason, on installing the TP-W8970, it switched my firewall status to public from home/office. Corrected that and the NAS can now be seen over the network. This does not fix the USB attached pen drive not being seen problem though.
Region : UnitedKingdom Model : TD-W8960N Hardware Version : V3 Firmware Version : 1.4.0 Build 111130 Rel.55990n ISP : BT Broadband
Just got myself a new Modem/Router (TD-W8960N), and it wasn't until I had it all up and running that I realised it didn't have USB port on the back.Anyways, I was wondering how I could go about fixing this? I stumbled upon this (TP-Link TD-8817) on Amazon and wasn't sure if I could attach this to it in bridged mode or something. This has the USB socket I need. If this was all I needed, how do they connect together? I have a BT connection btw.Also, I have a Justop Android 4.0 TV Box (media player). Would this be able to see the HDD for streaming movies.
I use a wired network connection to my neighbours Vodafone Modem (We share his monthly cost). I also have a TP-LINK 54M Wireless ADSL2+ Router from a previous broadband contract with a landline phone company. Is it possible to reset and configure the TP-LINK Router to act as a relay unit, connected to the network cable, so I can then use my laptop elsewhere in the house?
Region : Spain Model : TD-W8961ND Hardware Version : V3 Firmware Version : 3.0.0 Build 120524 Rel.05221 ISP : linksys1.jpg I have wifi at home this link installed. 192.168.1.1 is a TD-W8961ND 192.168.1.4 is a linksys wrtt54gl
And I have two problems.
1) I can not see any desktops in my local net, and with old router I could see all, for example (diskstation, dm800, etc...) In my macbook air I can not see my NAS Synology and with old router I do.
2) All PCs that are conected to 192.168.1.4 have not IP. and DHCP in TD-W8961ND is activated.
Region : Argentina Model : TD-W8968 Hardware Version : V1 Region : UnitedKingdom Firmware Version : 101029 ISP : TalkTalk
I have version 1.1 and d/l'd firmware 111125. The upgrade ran successfully to 100% and then I got the login screen again. However after checking, then restarting to factory default the version displayed was still the old one
Model : TD-W8960N Hardware Version : V1 Firmware Version : 1.4.0 Build 111108 Rel.40398n ISP : TPG URL Filter not working Region : Australia Model : TD-W8960N Hardware Version : V1 Firmware Version : 1.4.0 Build 111108 Rel.40398n ISP : TPG
Cannot get the URL filter to work Just upgraded to latest Firmware but that didn't work?
URL List Type: Deny Allow Disable Address Port Remove
Model : TD-W8951ND Hardware Version : Not Clear Firmware Version : ISP : Metronet BPL
I connect to the internet by BPL modem on electricity , for using my modem's wireless feature ı have to close DHCP and use modem in bridge mode, otherwise I can't use wireless, And my problem is connecting to the internet with my LG 42LM640S smart tv using wireless, When I talk with LG techinal service they came and try to connect tv to the internet with using their android phone's hotspot feature, my tv connect with phone's hotspot feature to the internet,So they said that "you have to change tp link modem's encoding system?Now it's encoding mode in WPA enconding system :S But whwen ı shut down encoding wireless tv didn't connect again?
Region : Others Model : TD-W8961ND Hardware Version : V2 Firmware Version : 2.0.0 Build 120427 Rel.09135 ISP : True
I just bought the wireless router as stated in the subject and I cant get 2 of our PC�s to connect wirelessly for some reason. 4 other PC's are fineAll machines running windows 7, but when the authentication type on WPA2-PSK the 2 computers ask for a password which we put in but keeps saying its wrong, but infact its right.I can connect them on WPA-PSK, but then all the computers drop out after 30 seconds.
Region : Italy Model : TD-W8970 Hardware Version : V1 Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n ISP : Infostrada
My TD-W8970 freezes randomly, sometimes several times a day, sometimes less, but now the problem it's more frequent and I suppose it could be generated by some internal component that could have a abnormal behavior.Anyway, this happens in different situations, either using all the functionalist, or being only on and in idle state. Last time was few minutes ago, when all the system were shuttled down and only router was on.
Region : India Model : TD-W8951ND Hardware Version : V4 Firmware Version : ISP :
The product manual of TD-W8951ND V4 states that it's supports MAC spoofing. But in the product itself, it is nowhere to be found. I tried contacting the customer care via email but they are too lazy to respond. If they disabled this feature then why in the world they mentioned in the manual. I double checked the manual before buying this model. Now I stuck with it.