I found out that I cant access my modem (TP-Link W8901G) config page at 192.168.1.1. I was pretty sure my ID and password is correct since I never changed them. It is also unlikely that the password got changed by other people who are stealing my Wi-Fi as I turned my WLAN on only when I requires the connection then it get turned off afterwards.
View 5 RepliesI'm expanding my home network and the adsl modem router supplied by my ISP has just 1 RJ-45 port and 1 usb port (and an RJ-11 for the Internet). I have zeroed in on TP-Link TD-W8901G having 4 RJ-45 ports, 1 USB port, 1 RJ-11 port and also it is a wireless router. Currently I would be connecting the above modem router to my desktop running Linux and using the same ISP with ADSL. Considering a future scenario where I may decide to use another way to connect to the Internet like maybe 3G or Cable, etc (with their separate modems) I was wondering if my same modem router (TD-W8901G) could be used as a standalone router for connecting the devices on my home network. Basically, what I want to know is whether this modem router would be able to share an Internet connection from some other source, other than the one provided through its own RJ-11 (ADSL) source?
View 1 Replies View RelatedI have a TP link TD-W8901g modem router with 1 wan and 4 LAN. My questions is can i use this modem to receive wifi signals through wan and give out through lan. i currently use internet from telephone cable. But i have got a free hot spot near my home. Currently i Am using a pc without wireless card.
View 1 Replies View RelatedI have been trying to configure some settings on my modem and to do so I must access it from it's ip (192.168.250.1). However, when I load that ip in my browser it does not connect.
My router has a private ip of 192.168.0.1 because of a Double NAT issue which I am trying to fix by going to the modem's configuration page. I am pretty sure that it is 192.168.250.1 because that is what my router ISP Gateway says, along with ipconfig in cmd when I directly connected to the modem from my computer.
By the way, I am currently connected through my D-Link 254 router which is connected to my WiMax modem.
Region : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version :
ISP :
problem with filtering
Region : Syria
Model : TD-W8901G
ver 6.0
54Mbps wireless G ADSL2+:
I used the url filter utility inside the router program. I put some url for example www.google.com, I wanted to try the filtering cababilty, Later I deleted all these adresses , but unfortunatley it keeps telling me the following message: "The system returned: (110) Connection timed out The remote host or network may be down. Your cache administrator is webmaster@proxy1."
I get disconnected from my ADSL2+ connection now and then and it is starting to irritate my a lot so I want to investigate the problem, but I can't access my modem config page. The modem is a Zhone 1511-A1 and the default ip is 192.168.1.1. I tried to reset the modem to isp configs and it did not work. When I ping my address it says "TTL expired in transit". I really don't know what to do next to get into this config[CODE]
View 6 Replies View RelatedI've tried all IP's that could be... 192.168.1.1 ,etc. , etc.Of course I am behind a router but even though I tried the same with connecting directly, it showed my gateway to be 78.56.191.254 which didn't work at all ( but was ping-able ).I restarted router and computer several times as well as switched form router to direct connection which brought no luck as well.
View 9 Replies View RelatedRegion : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version : 6.0.0 Build 120213 Rel.30335
ISP : ETAPA
I am writing in from Cuenca, Ecuador. I have a TD-W8901G Wireless ADSL2+ Modem Router. I have accessed the interface using the default ip address:192.168.1.1.When I select Interface Setup from the menu, it only shows Internet and LAN as the only 2 options. Wireless is no longer there. It just disappeared! The LED indicator light for WLAN is also "OFF." When you try the Quick Start wizard guide, it cannot complete the setup because there is an IP address error.
I have changed the firmware 2x since, trying to remedy this, I have also tried factory resets at least 3x. Nothing has worked up to this point.
I have the next config: PC -> Asus RT-N16 router (192.168.1.1) -> LinkSys WAG54G2 in bridge mode (192.168.0.1),How can I access to modem's config page from my PC ?
View 2 Replies View RelatedRegion : India
Model : TD-W8901G
Hardware Version : V6
Firmware Version : 6.0.0 Build 120418 Rel.34102
ISP :
Everytime, I turn on the ADSL2+ wireless modem router, it connects to the internet and my laptop gets paired with the wireless network but after 30 mins time, wireless ADSL2+ router restarts itself and goins in a loop for nearly 5 times and then it gets connected to internet but then I cannot connect my laptop to the the router using wireless with error DHCP failed to assign IP but DHCP is enabled in the router. This has started since a month and I had tried several network change settings but nothing has given me a solution. I do use Kaspersky IS through which the connection flows in. My internet setting is set to use Automatic DNS discovery and most time, I get RC 102 DHCP error.
Model : TD-W8901G
Hardware Version : V3
Firmware Version : 3.0.1 Build 100901 Rel.23594
ISP : Ttnet
My web browsing/surfing speed decreases when I'm transferring files between other computers which are connected to this modem, and when a torrent client is downloading from 20+ seeds. I want to give the HTTP connections (port 80) the highest priority possible, so that my connection wouldn't delay when non-HTTP connections are active.The interface of the modem related to QoS settings are as below:What QoS settings should I enter (what rule(s) should I define) for giving HTTP protocol higher priority?
Information about my environment:
Modem product ID: TP-LINK TD-8901G
Modem firmware version: 3.0.1 Build 100901 Rel.23594
Modem hardware version: 3.1
My OS: Windows 7 Ultimate x64 SP1 My physical port: Enet1 (Eternet #1)
My local IP: 192.168.1.2
My torrent port: 5002
IP of the computer I'm transferring files between: 192.168.1.4
Physical port of the computer I'm transferring files between: Enet 2 (Eternet #2)
I cannot access my Motorola SB6141 cable modem status page at 192.168.100.1 thru the EA6500 router. I can bypass the router and can connect to the status page with no problem. Is there a setting to change or can I possibly do port forwarding to access it?
View 9 Replies View RelatedI have 60+ website domains to allow on my network using Website Fitering. Is it possible to expand it or is there another router out there that has a large amount of domain allowing or blocking?
View 1 Replies View RelatedI upgraded my router from version 1.2 to 1.35NA, through the Tools / Systems page on the router (uploaded the bin file). I am connected to the router via a wired connection.
During the upgrade, the message said I wouldn't be able to access the webpage until 75 secs. I watched it count down the seconds and then when it refreshed, I could not get to my routers page: 192.168.1.2
The DLink Router is connected as a pass through router to my FIOS router, so that I can use the wired ports and I use the DLink as my wireless router (fios router wireless strength was poor).
All the lights on the router are working as though everything is ok. I am still connected to the Internet, so it appears that the pass through of my wired ports is still working after the firmware upgrade, but wireless is not. Not surprising. I expect I may have to upload my settings (which I did save), but since I cannot get to the routers page, I feel a bit stuck.
two more bits of into. I also tried getting to 192.168.0.1, which might be the default? and I cannot get there either. My Fios router is on 192.168.1.1 (and as mentioned, the DLink should be at 192.168.1.2). Fios Router reports that the 192.168.1.2 port is inactive.
I am using D-Link DIR-615, I need to ask is it possible that i change the error page "Forbidden Web Access" ? I have blocked some websites and i dont want ppl know that it is blocked by router because in D-Link default error msg it is clearly mentioned that " This page is not included in the router's Allowed Web Site List". Is it possible that i redirect error page to some other site? or change error message?
View 2 Replies View RelatedWhenever I enter 192.168.1.1 to access the login page of my router, I cant access it to configure it even after resetting it !I also tried changing TCP/IP settings to static as mentioned in the router's manual but it dint work?
View 4 Replies View RelatedI have been using this router for 6 months without problems. However, it hasn't been working since yesterday morning. It receives power but the Internet led doesn't light up. The network leds are blinking faintly and rapidly. I can't access the configuration page from my browser. Is it dead or not?
View 9 Replies View RelatedRegion : UnitedKingdom
Model : TD-W8980
Hardware Version : V1
Firmware Version : 2013 firmware update
ISP : PlusNet
I changed the local port to 8080 for accessing the web logon page (i.e. 192.168.1.1) instead of its default port 80.
[code]....
Region : UnitedKingdom
Model : TD-W8961ND
Hardware Version : Not Clear
Firmware Version : V.3
ISP : ADSL24
Using windows 7 and 8 on different machines I am unable access my routers web based set up.
I enter the usual "admin" and password in the login box. 3 goes and then get error message. or hangs on waiting.(connected to the router with Ethernet Cable). Could this be a windows based problem. I think it was ok on XP but that is gone now. Router is working fine but I just cant access it to alter any settings.
My 2 other spare routers which are not TP-link also have the same problem.
I'm using my 655 as a WAP, so nothing is connected to the WAN port. Since I run a SBS2008 in my home, I also have the 655's DHCP disabled.If I enable Network Filtering, everything inbound/outbound on the LAN ports works except accessing the Admin page. Even if I put the connecting PC's LAN MAC in the tablet.
View 9 Replies View RelatedIs it possible to configure a Westell 6200 DSL modem to accept access via a remote PC? I have a security camera that can be viewed via remote computer access, but I cannot configure my modem to accept a remote access.
View 3 Replies View Relatedi need to get into the web page because i need to open my XBL nat and when i type in the password to get into the routers page i get a blank screen
View 2 Replies View RelatedHow do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at 192.168.1.245 does not work.
View 1 Replies View RelatedI would like to be able to access my DSL Modem's http setup screens from my networked computers via my DIR-655 (rev B) router - but I do not know how to get the router to route to the WAN port.
At first, I had my DSL Modem's LAN IP at 192.168.0.1 and my DIR-655 at 192.168.1.1 and the rest of my home network at 192.168.1.xxx; because I had read on a forum that having the modem on a different subnet prevented potential routing problems. When I pointed my web browser to 192.168.0.1 - it would just timeout (I kind of expected that).
Now (willing to try anything), I have my DSL Modem's LAN IP at 192.168.0.2 and my DIR-655 at 192.168.0.1 and the rest of my home network at 192.168.0.xxx (DHCP range is set to assign hosts from 64 to 254). When I point my web browser to 192.168.0.2 - it still just times out.
The DSL Modem is setup in transparent bridge mode. And everything else is working well with the home network.
How can I get the DIR-655 to pass/route my http connection to the DSL modem?
I was trying to access the modem router as the admin but AT&T seems to have a pain in the butt security system from me making any changes. I wanted to forward some ports to setup my Synology DS212j Network Attached Storage (NAS). I connected my d-link router to the already setup modem router which I am now connected to. I have to run off to school but I was wondering, would I be able to forward the port off my d-link DIR-601 and be able to host my NAS server off that?
I don't have too much in-depth networking experience besides setting forwarding ports, setting static IPs, but I can't do that since I am not the admin for the AT&T router. I figure the password for the AT&T router is just defaulted to admin or blank but I haven't had time to fully test everything out.
I need to access my modem config page which I could access months ago. In Start, Run, cmd, ipconfig, my default gateway is "192.168.1.1". when I type it in Chrome Browser it says Error 324(when antivirus on) and Error 101(when antivirus off). Tried with explorer (cant connect), Firefox(says done and a blank page) and opera, none working.The last time I could connect to that configuration page was like 4 months ago but I think I did something wrong and can't do it anymore.
View 19 Replies View RelatedMy apartment already has internet provided to all of the rooms, but I'm trying to set up my router as a wireless access point. I tried disabling DHCP on the router, but then I wasn't able to get any internet access at all. Does this device not support bridge mode?
View 5 Replies View RelatedMy desktop recently broke so i bought my first laptop. I have AT&T DSL and i bought a new D-Link DSL-2640B modem/router so i could have wireless internet. I installed it and i was able to use it with the ethernet cable, however when i tried to use wifi, it worked for only about 2 minutes before it disconnected.. Now when i try again it says that it is connected (full 5 bars) but it also says there is no internet access and i cannot use the internet.
Also, before, with the old modem i was able to just connect the ethernet cable to the laptop and just start using the internet. Now i have to connect by putting in my username and password provided by my ISP almost like if it was dial up. I don't know why i have to do this now but not before.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model
[Code].....
The wireless is just beyond my computer's ability to detect. I have a D-Link WBR 1310 Router hooked up to a high gain wireless antenna-yes, clear line of sight. I have no direct access to our community modem or ISP.
View 10 Replies View Relatedi am using a tp link 8817 modem, i can go online normaly but i can not access the default gateway (192.168.1.1, i check it in cmd/ipconfig) it keeps asking me username and password, althought i filled them with the correct username and password.
View 2 Replies View Relatedfirst off I was trying to change my ip address to dynamic from static, turns out I cant manually, anyways I was messing around with the configuration on my modem page (192.168.0.1) trying to enable dhcp because I know that if it shows that its not enabled yet I get my ip address automatically, it means my ip is static. I enabled a few things like netbios over tcpip and such and something to do with dns routing but I cant recall all I did and in what order because I can no longer get into the config. page and I cant connect to the internet and when I use command promp to renew my ip it says "an error occured while renewing interface local area connection... unable to contact your dhcp server and also an error occured while releasing interface loopback psuedo-interface1 : the system cannot find file specified.
View 2 Replies View RelatedHow can I configure my TP-Link router TD-W8950ND act as an access point? I'll be connecting it to a main router which is connected to the ISP.
View 1 Replies View RelatedAt my office we have a wireless modem(D-Link DSL-2750U) and all the clients are connect to it wirelessly with a wireless lan card. at the next floor we have two pc(without wireless lan card) that I want to connect them to this network, I have a switch and a wireless access point(TP-Link TL-WA701ND). my Question is that how can I connect the WAP to Modem? I set the operation mode of WAP to client and add the MAC address of it in the table of wireless modem but the clients cant connect to the network.
View 1 Replies View Related