Cabling / Cards :: D-Link DIR-100 Router - Can't Access Configuration Page From Browser

Feb 5, 2011

I have been using this router for 6 months without problems. However, it hasn't been working since yesterday morning. It receives power but the Internet led doesn't light up. The network leds are blinking faintly and rapidly. I can't access the configuration page from my browser. Is it dead or not?

View 9 Replies


ADVERTISEMENT

Cabling / Cards :: MTS Browser Zte AC8720 Data Card Installation Error In Windows 8

Feb 25, 2013

I have the Mts Mbrowse ZTE AC 8720 data card. it has problem in installing in windows 8 but it works properly in window 7. It has an error fail to install access serial port 0. i didn't understand the error.

View 1 Replies View Related

Cabling / Cards :: D-link Router Keeps Resetting Every Ten Minutes On Its Own

Sep 9, 2011

My D-link router won't give me a break. Every 10 or 20 minutes it resets, severing the internet connection. This is extremely annoying, especially when I'm playing online games or downloading something. Simply put, the three lights suddenly turn off, then they start turning on again one after the other. I don't want any of the automated answering machines with their usual 'help', like "download update", "contact your ISP","disable your firewall".

View 2 Replies View Related

Cabling / Cards :: D-link 524 Router / Wifi Signals Not Detected

Apr 1, 2013

I have D-link 524 router, my problem is that its signals are not being detected previously it was working fine( the devices we connect are ipad 4, htc wildfire S, nokia e-5 . these devices detect other wifi and connect to them.

View 2 Replies View Related

D-Link 254 - Can't Access Modem Configuration Page

Jan 29, 2012

I have been trying to configure some settings on my modem and to do so I must access it from it's ip (192.168.250.1). However, when I load that ip in my browser it does not connect.

My router has a private ip of 192.168.0.1 because of a Double NAT issue which I am trying to fix by going to the modem's configuration page. I am pretty sure that it is 192.168.250.1 because that is what my router ISP Gateway says, along with ipconfig in cmd when I directly connected to the modem from my computer.

By the way, I am currently connected through my D-Link 254 router which is connected to my WiMax modem.

View 2 Replies View Related

Cabling / Cards :: Increasing Wifi Reception On Laptop Without Access To The Router?

Oct 15, 2011

I live in an apartment building that offers free wi-fi. The connection on my laptop is bad and extremely inconsistent. I was wondering how I could improve this. I was wondering if a usb wireless network adapter would improve my connection.

View 2 Replies View Related

Cabling / Cards :: Slow / Spiking Internet Speeds With Wired Connection Through D-link WBR-1310 Router

Sep 18, 2012

I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.

I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.

Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02

[Code]......

View 2 Replies View Related

Cabling / Cards :: TP-LINK WN722N Keeps Disconnecting?

Jan 19, 2013

My previous wireless card was D-Link brand, and worked great. I never ever had trouble with connecting, never had to think about it or mess with any software. It always ran silently in the background, and connected automatically without fail. The card got damaged when I moved my computer, so I bought this T-LINK brand because it had good reviews.First I installed it from the CD the recommended way--with drivers and software. It was able to connect after some fiddling around, but then it would periodically disconnect. The problem seems to happen every 10 minutes or so, or whenever I open a game or program (like Steam), or google chrome/internet explorer, anything that requires internet usage. Sometimes it would give me an error about the settings of the card not being the same as the network settings. I think I fixed that, and still it had the same problem (it should have automatically detected the settings though).

The only way to restart it was to unplug the card, wait 10 seconds, plug it back in, or to restart my computer. However, it would soon DC again. When it does so, its like the card just goes to sleep -- no more blinking green light. Also, I made sure that the drivers that came on the installation CD are current (which they are). Eventually, after playing with settings to no avail, I uninstalled drivers and software and then restarted my computer, then reinstalled just the drivers.At first it was unable to connect, but after moving the stand to a different USB slot, then refreshing my IP through cmd, it did connect. It then DCed once on its own. I was able to get it back up after pulling the card out of the USB stand and plugging it back in. Since then it has not DCed, but I am not holding my breath.

First I have to say, I absolutely hate the program that came with it. Windows does everything the program does, except 100% better. I am not surprised that its not DCing as much with just the drivers.Ah, I spoke too soon. While writing this post, I attempted to open a new tab in google and it temporarily DCed me five times in a row. Specifically, there is a little yellow triangle over a 5-bars good signal. Says it is connected (limited connectivity). This time, the little green light stays blinking. It eventually re-connected itself each time on its own (maybe when the IP refreshed itself?). Each time it happened I was trying to use google searchThe 6th time I was in the middle of watching a video on youtube (not sure it makes a difference). The DCing seems to happen a lot more when I am actually using the connection. Sometimes I cannot load a web page even when it
says I am "connected"[CODE]

View 2 Replies View Related

Cabling / Cards :: D-link Dir-300 Connection Timeout

May 13, 2012

I'm using the D-link dir-300 wi-fi router. Cable internet connection. PC is connected to the router by the cable and the laptop via wi-fi. Both machines have the same problem - after some time, although there are no package loss when I'm pinging anything, some services report "connection timeout". Such as PvP.net, EA Online and Turbofilm.tv. Soft reset, hard reset didn't solve anything. Although when PC is connected straight to the main internet cable - there are no problems at all. [code]

View 7 Replies View Related

Cabling / Cards :: D-Link DWA-125 Connection Wizard Does Not Close

Oct 28, 2011

When restarting my PC after a short power failure the D-Link connection wizard autostarts trying to connect to my wlan. After a short while I have a connection and is able to access the internet. The connection wizard, however does not register that a connection has been established and continues to attempt to connect for two minutes, then shuts down and immediately starts for another two-minute try....and so on. If I shut it down it just pops up again.This has never occured before. I run Windows 7 on an HP with an AMD processor.

View 3 Replies View Related

Cabling / Cards :: D-Link Network Card Not Being Recognized?

Jan 14, 2012

Ive been using a d link network card for one of my desktops. It was working perfectly. But since my computer was starting to slow down I decided to format the harddrive and re install windows xp. Now the Network Card is not being recognized on the pc. Any idea how to make it work? I don't know where the Cd is and what model it is...

View 6 Replies View Related

D-Link DIR-615 :: Can't Connect To Router Configuration Page

Oct 11, 2011

I have a D-Link dsl 2640u, it's a modem but since it has 4 ports im assuming it's also a router. My problem is that when i enter my ip address into the address bar it doesn't recognize it. I can't use Utorrent or anything that requires ports to be opened..and it's a pain in the butt. when I type ipconfig on my command prompt it brings up..172.16.X.X and when i enter it into the address bar nothing is found. I'd like to port forward by accessing the modem's config page.I read on another thread that i could set my own ip address by going to: Control Panel>Network and Sharing center> Local Area Network>Properties of Ipv6 and typing my own ip address but when i do this i lose my internet connection.

View 14 Replies View Related

Can't Access Own Router Configuration Page

Jan 4, 2013

I have a wireless Netgear extender, and can not find set up page..Can't access own router configuration page

View 3 Replies View Related

Cabling / Cards :: WMP45G Link Adapter Setup Crashes

Apr 22, 2012

I recently re-installed windows xp sp1 on my computer when i run the setup in it the program appears for a second then crashes and makes a windows error sound.

View 1 Replies View Related

Cabling / Cards :: Connected But Unable To Access Internet?

Mar 29, 2012

It is a Dell Inspiron using Windows 7 and the internet has suddenly stopped working on it. It is able to connect to the router fine and says it has a connection but is unable to access anything. And this is accessing the router either wirelessly or wired through an ethernet cable. I know that it is not the router because her roommates are able to access the internet fine and her computer is also unable to access the internet from other networks. Is it possible that the network card in her laptop has died and needs to be replaced? or could it be a corrupted driver? Would using a usb network adapter be a temporary fix? I have searched many forums trying to find an answer but have been unable to.Also a couple times when attempting to see if the wired connection worked I had plugged in the ethernet cable and was able to access google for 5 seconds and then it stopped working, and then unplugging and reconnecting would yield the same results

View 3 Replies View Related

Unable To Access Router Configuration Page?

Aug 8, 2012

I have the issue of being unable to access my router configuration page. My standard gateway IP (83.226.48.1), does not work, resulting in "unable to connect". If I try with my IPv4-adress, it just comes out with a blank page (Mozilla Firefox and Internet Explorer).

View 17 Replies View Related

Cabling / Cards :: Losing Connection Using Intel Wifi Link 1000?

Jun 14, 2011

I have the same issue and have been surfing the web for the solution for quite some time. Brand new Sony VAIO laptop with blu-ray has an Intel WiFi bgn 1000 wireless network adapter. It worked fine for couple of days, until i brought it to work. We use wireless connection in our office. Maximum 7 computers are connected at a time. All other 6 laptops connect to our network with no problems (all of them are on win7x64). Now, back to the problem. Wireless works at home and at work in the evening , when no one in the office. I've removed all 3rd party software, uninstalled Intel software. Am using clean driver from the Intel website. Tried different revisions of the driver - issue is still there. I've contacted VAIO support. This is not known issue to them. They offered standard actions (unisntalling the driver, power management options, enabling VAIO Smart Network). No updates of fixes on their support website. I have also checked in the event viewer. There is only one service being enabled and disabled constantly (TCP/IP NetBIOS Helper) - which is happening at the same time with wireless drop. There are about 5-8 drops per minute. Computer browser service disabled. Firewall disabled, antivirus disabled. We assume this could be an interference with mobile diveces. While now, we have disabled all wireless cards on all computers, switched off mobile phones. And... AXAXAXAXA!!! BSOD 0x00000018 (0x000....00, 0xFFFFFA800754A750, 0x00...02, 0xFC01020EFC01020B).

View 5 Replies View Related

Cabling / Cards :: Unable To Connect To Internet With TP-Link Wireless Adapter

Dec 27, 2011

Today I bought a TP-Link 150 Mbps Wireless PCI Express Adapter so I can pick up the internet connection in my house from my home PC. (We use a laptop most of the time which is able to pick it up fine).I've installed the wireless adapter into the computer and installed the drivers however I receive an error message:

"The device may not be present or could have been ejected/unplugged from the system. Insert of Reinsert Now."

View 13 Replies View Related

Cabling / Cards :: Rosewill RNX-N180PCe - Limited Access / Ip Not Valid?

Oct 6, 2012

i have a Rosewill RNX-N180PCe Wireless LAN 802.11n PCI-E NIC and today when i turned my computer on i noticed a cation symbol on my internet access, it said that i have limited access and after going through the troubleshooting it said that my ip address is not valid, however when i connect via Ethernet i dont have any problems, also no other devices that require wireless internet access are having any problems, ive tried everything i can think of; checking for hardware changes, updating drive, disabling/enabling and nothing has worked

View 8 Replies View Related

ARRIS TG862 - Can't Access Own Router Configuration Page

Nov 18, 2012

I have Time Warner[Road Runner] and an ARRIS TG862 router. I have tried cmd->ipconfig->and connected through the address shown[Default Gateway;192.168.0.1] and have tried an ipconfig/ flushdns -> /release ->renew as well to no avail. Is there anything I could do to access the page? P.S. This was all done through a Windows 7 desktop connected directly to the router through an Ethernet cable

View 5 Replies View Related

Cabling / Cards :: TP Link TL-WN722N Wireless Adapter Refuses To Work On Windows 7?

Sep 7, 2012

I have a TP link TL-WN722N wireless adapter and it refuses to work on my win7 machine. I've tried installying the cd driver, all the relevant drivers on the TP link website, and the generic atheros driver. I've also tried manually installing all those drivers using device manager to no avail, and it says "a device attached to your system is not functioning"

But I know the physical adaptor is working because I was able to successfully install it onto another computer (it was a windows 8 preview version).

View 12 Replies View Related

Networking :: Access To Modem Configuration Page Through Router WAG54G2

Nov 4, 2011

I have the next config: PC -> Asus RT-N16 router (192.168.1.1) -> LinkSys WAG54G2 in bridge mode (192.168.0.1),How can I access to modem's config page from my PC ?

View 2 Replies View Related

Cabling / Cards :: Network Of Wifi Access Points With External Server Authentication

Apr 6, 2013

I'm planning to create a network of wifi access points all in different locations. Those locations all have different wifi routers and networks. I'm looking for a easy solution that let easily setup those networks to ask authentication credentials (in a browser page, once a user is inside the wifi and wants access the internet) by an external server possibly without overloading too much that server.

View 1 Replies View Related

Cabling / Cards :: Compaq Presario Cq56 Connects To Network But No Internet Access

Nov 4, 2011

I have a compaq preario running on windows 7 ultimate.It has been working well with the internet connection but recently it stopped connecting to the internet.It recognizes other computers in the network but the internet connection is not available.

View 1 Replies View Related

Protocols / Routing :: Cannot Connect To Router Page On Browser

Jul 28, 2011

I recently am trying to get an open nat type so I can play Playstation network better. I watched a video and they told me to turn off the NAT and I did now it does not let me connect to the router page now, I can connect to the internet and stuff but I can't connect to the router page

View 19 Replies View Related

D-Link DIR-825 :: Access USB Storage Plugged Into Router Other Than Using Internet Browser?

Sep 2, 2012

Is there any way to access the USB storage I plugged into my router other than using an Internet browser?  I was hoping to use it like any other drive on my system.

View 3 Replies View Related

Cabling / Cards :: Patch Box Router To Be Used

Nov 3, 2011

I'm currently volunteering at a children's group near me. They've just moved offices and are wanting a computer network in place. I have quite a bit of experience with hardware and software troubleshooting, but anything past the server is beyond me.They have a telecommunications box, as many places do, and the box has a set of patch boxes that are, according to the telecommunications people, plugged in and good to go. Each office has tunnelling on the wall with network sockets, again the norm.

View 4 Replies View Related

Cabling / Cards :: Linking More Than One Device To Router?

Jan 23, 2012

I don't know if this is the right place to ask but pretty sure you'll be able to answer my Q. I have to have my internet router/modem in the kitchen as its the only phone point in my flat currently working, but my partner has to run an ethernet cable down the hall from there to hook up his xbox 360. however, I want to be able to use ethernet for my laptop occasionally to get a better speed then over wireless as the wireless isn't perfect from the room i'm in and wondered what the best way to go about this was. I could also plug in my PS3 if there was a way to get all my devices connecting to the router without too many cables. I've heard of a switch.. what does this do? Or will a simple ethernet connector work for what I wanna do

View 3 Replies View Related

Cabling / Cards :: Seem To Be Connected To Router But Can't Get To Internet

Jan 1, 2011

I have the following equipment/software: Acer Aspire One running Windows XP SP3, Artheros AR5007EG wireless network adapter, Realtek RTL8102E PCI NIC, Cisco Linksys E1000 Router.The Wireless Network Connection status says that I'm connected to my network with a full signal strength but I cannot get out to the internet and I cannot ping the router from that computer. I can, however, get to the internet via a wired connection to the router via the Realtek NIC. This has been the only computer that I've been unable to connect to my network and to the internet. It was connected to a different router before and connected easily but that router went bad so I replaced it with the E1000.Don't know if it's the wireless adapter that's bad or something else.

View 1 Replies View Related

Cabling / Cards :: Using Dlink 615 As An Extended Router?

Jan 17, 2013

I have received a router from my isp and ive connected that router to my dlink 615 the computer connects to tIhat network but theres "no internet access" and sometimes its taking longer than usual also its showing 2 signals (1 from my og router and the other from the dlink router), also i cannot use my dlink router as the main router cause my phone line is connected to my isps router

View 19 Replies View Related

Cabling / Cards :: Modem Only Works With Router

May 8, 2011

My problem is that my desk top computer only gets the internet when my modem is plugged into my router and the router plugged into the computer.If i unplug the router and just go modem to computer it tells me its not plugged in.

View 19 Replies View Related

TP-Link 150Mbps Wireless :: WR702 Connecting To A Hotel Network With Browser Configuration?

Mar 25, 2013

Region : UnitedKingdom
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP :

I am trying to work out how I can use the WR702 to connect to a Hotel's wireless connection. As with most modern hotel setups, the hotel requires the user to access a web browser and enter the room number and select a purchase plan.I believe there must be a way that I can connect the WR702 to the hotel's network and then use a browser on a linked (wireless or ethernet) laptop to launch the browser and log in, however, I have tried every default configuration on the WR702 and cannot find a solution.

Setup:

WR702 router
HP EliteBook 8440p laptop (ethernet and wifi available)
Hotel wifi (multiple identical SSIDs in the survey but shows as a single wifi name on my iPhone)

View 1 Replies View Related

Linksys Access Point :: Cannot Access Configuration Page For WAP11 Access

Jun 12, 2007

Cannot access configuration page for WAP11 Access

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved