Cabling / Cards :: Seem To Be Connected To Router But Can't Get To Internet
Jan 1, 2011
I have the following equipment/software: Acer Aspire One running Windows XP SP3, Artheros AR5007EG wireless network adapter, Realtek RTL8102E PCI NIC, Cisco Linksys E1000 Router.The Wireless Network Connection status says that I'm connected to my network with a full signal strength but I cannot get out to the internet and I cannot ping the router from that computer. I can, however, get to the internet via a wired connection to the router via the Realtek NIC. This has been the only computer that I've been unable to connect to my network and to the internet. It was connected to a different router before and connected easily but that router went bad so I replaced it with the E1000.Don't know if it's the wireless adapter that's bad or something else.
View 1 Replies
ADVERTISEMENT
Jun 30, 2011
WOke up this morning and my desktop will connect to the router via LAN and WLAN, but states that there is no external internet connectivty.I know this isn't the case as my MAC will connect via WLAN and LAN (same ethernet cable) and I can access external sites. My router is therefore working correctly and my internet connection is fine.I presume this must be some kind of driver issue, but it states that my drivers are installed, up to date and working correctly
View 11 Replies
View Related
Mar 29, 2012
It is a Dell Inspiron using Windows 7 and the internet has suddenly stopped working on it. It is able to connect to the router fine and says it has a connection but is unable to access anything. And this is accessing the router either wirelessly or wired through an ethernet cable. I know that it is not the router because her roommates are able to access the internet fine and her computer is also unable to access the internet from other networks. Is it possible that the network card in her laptop has died and needs to be replaced? or could it be a corrupted driver? Would using a usb network adapter be a temporary fix? I have searched many forums trying to find an answer but have been unable to.Also a couple times when attempting to see if the wired connection worked I had plugged in the ethernet cable and was able to access google for 5 seconds and then it stopped working, and then unplugging and reconnecting would yield the same results
View 3 Replies
View Related
Sep 9, 2012
I thought i would clever and make an extension from my Virgin Superhub via Ethernet to a second pc that is currently using Wireless to improve speed.The amazing thing is the ethernet cable I made up actually seems to work but only when my wireless connection is on. If I disable my wireless to use just the ethernet I get no connection showing!If I click on properties it shows I am connected at 100mbps but I presume this is just the connection between the Hub and the pc although my Internet connection dialog also shows 100mbps.In the Services dialog I can add services which I presume would give me access.I have my ip address but do not know the name of the service I should be running (DCHP?) or the Port numbers.In addition to this there doesn't seem to be a network card appearing in device manager other than the wireless dongle.
View 5 Replies
View Related
Jul 29, 2011
My Internet connection works completely fine when all I have is my laptop connected to the wifi, but when my desktop also connects to the internet, than my laptop's internet doesn't work at all until i shut the desktop down.
View 2 Replies
View Related
Apr 24, 2012
I have wireless connectivity, but my ethernet local area post will not work. Pinged 198.168.1.1 but got 4 timed out messages. Checked hardware condition and the controller card says it is functioning properly. Running Network Properties shows only the wireless connections, with Local Area Port disconnected.
View 16 Replies
View Related
May 6, 2011
ok so ive been messing with my aunts desktop trying to get it to run online.
her network adapter SAYS its connected but when i try to actually go online it says its not connected.
i checked the connection and it does say its connected. it is a fresh install and i reinstalled the driver for the internet.
ive unchecked the automatic config for the net options (saw in some suggestions)
View 4 Replies
View Related
Jan 19, 2013
I am unable to connect to the internet through my wireless router. However, I can connect using neighbor's wireless connection and other laptops in my home are able to connect to the internet using MY wireless connection. The problem started suddenly, I used to be able to connect, then I had the problem so I rebooted and that resolved the issue temporarily. I tried disabling the wireless adapter card then rebooting, this did not work. I also unchecked the TCP/IPv6.
View 4 Replies
View Related
Jul 7, 2011
I bought I router today, Linksys E2500 and set it up, for some reason its connected with full strength but the internet does not work on my computer, or any other device connected to the network I established on the router.the interenet still is not working. The modem is fine, as when I disable the wireless connection, the internet works. Yes, I have Sp3 installed.
[code]...
View 3 Replies
View Related
Sep 18, 2012
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
View 2 Replies
View Related
Aug 1, 2012
I have an Eee-PC and im trying to connect to the internet via my HUAWEI E173 MOBIEL INTERNET STICKWhen I plug it in it reds it, but only like a mass storage device.
View 3 Replies
View Related
Oct 1, 2011
A few weeks ago, i noticed that my desktop was unable to access the internet, even though it shows that it is connected. i eventually decided taht it must have been a hardware issue, so i bought a new motherboard. after installing the motherboard, an a fresh installation on Windows, i saw after the drivers were installed that the same thing was happening. I pinged sites, and i got no losses on data. i also did a tracer, and it showed me that it is in fact connecting.
I noticed that when I connect the pc to the network(it is always via cable) it recognizes the network as "network", whereas if i use the same connection for my laptop, it brings up the network as "NETGEAR", which is, in fact, my network's name.
View 12 Replies
View Related
Apr 1, 2013
I have a fee pcs at home...all are able to connect to the internet but theres only one thats not able to...the network and connection centre keeps and changing from identifying to not connected. The cable itself is fine.
View 13 Replies
View Related
Dec 30, 2011
I can open files, play videos, run programs, etc. Windows installed without a problem.However, I can't connect to the Internet. At all. I can't even register my version of Windows because I can't contact Microsoft for verification, because the connection won't get through. No Internet devices can be detected.That was with a long cable wired directly to our router, which is next to our modem.So, today, I bought a D-Link Xtreme N Desktop PCI adapter to connect. Still no connection... I don't think the PC even detects the adapter, because the drivers coming with the adapter can't detect it, and the light on the adapter doesn't turn on.That shouldn't happen. Both the cable and adapter go directly into the motherboard. My operating system is Windows 7 Ultimate 64-Bit, and my motherboard is an Asus P8Z68-V PRO.My ISP is Cogeco. All other computers and wireless devices in the house work perfectly fine.
View 2 Replies
View Related
Sep 30, 2012
My acer aspire 4736z can not use anymore internet even tough the wifi icon says its connected. I can use cable. should I download a new wifi adapter? My adapter is Atheros AR928x wireless net work adapter.
View 1 Replies
View Related
Aug 31, 2012
I just got a new laptop. Like, just yesterday, but for some odd reason it can't connect to the internet in the living roomMore Info:Laptop bought yesterday. Absolutely new. Samsung, A6 Vision, Windows 7. It can hold to 480GB I think or at least around and has 6GB Ram. I brought it home, made the default brower Google Chrome and connected it to the home internet and entered in the security key/password, so it's all connected. IN the living room, the connection is really good. All the other laptops there -even my really bad old one can connect fine to the internet. My new one says it's connected, but no internet. But since the other ones get internet, I don't think I need to restart the router -although I did so anyways and it didn't work
View 1 Replies
View Related
Jun 20, 2012
I just bought a used laptop and everything seems to work fine except the wireless. I sometimes can't find networks that I know are there but this can be fixed sometimes by restarting. The biggest problem I have is the internet speeds are really slow. I'm running on an N router and I am only getting about 100kb/s when my other laptop is getting about 600kb/s to 1mb/s. I have no clue what is wrong. I was thinking of trying to change the wireless card but I don't want to be hasty.
View 6 Replies
View Related
Mar 6, 2011
After pconfig /renew (I get this error) No operation can be performed on pth while it has its media disconnected. An error occurred while renewing interface local area connect an operation was attempted on something that was not a socket.
I am also trying to wipe it but no not have XP disc and no one I know does either so what is the safest way?
View 7 Replies
View Related
Jun 29, 2011
We have 3 units of computer in our house uses a router and a 8port switch hub. The unit i am using can connect directly to the internet but cannot be mapped in lan. I tried pinging and i already assigned IP addresses in all units but still nothing happen. I already done format and cloned from the other unit.
View 3 Replies
View Related
Jan 28, 2012
i bought a netgear for my laptop and when trying to connect to it,i get through the connections to the setup and then it says that it detects a static ip address.
View 1 Replies
View Related
Jan 25, 2012
I have a client who has 4 computers in the house all running wireless. 2 desktops and 2 laptops. One of the laptops is running XP and after 5-10 minutes of surfing, the internet stops working while all the other computers retain a good internet connection. Repairing the connection via the taskbar icon fixes it temporarily until the issue reoccurs.
View 10 Replies
View Related
Jul 5, 2011
I have one desktop system and one laptop.In desktop i have Internet Broadband. Now i have installed wifi PCi card into Desktop to share internet to my laptop.But there seems some problem i am not able to share internet.
View 9 Replies
View Related
Apr 3, 2012
I can connect to the internet using my neighbors wireless router but when I try to use my ethernet cable it connects me to "network 16" but the internet doesnt work. Ive tried different cables and different wall ports and that didnt work. It has been working before but I disconnected it to go somewhere and when I came back I had this problem. I use Windows 7 and Im trying to connect using Marvell Yukon 88E8057 PCI-E Gigabit Ethernet Controller.
View 8 Replies
View Related
Aug 20, 2012
I have a Windows 7 based Dell computer and it can connect to the wifi but not the internet. I have 2 android phones and ASUS netbook with Windows 7 Starter that have internet access.I've tried the netsh commands as admin. I did download Xirrus WiFi Inspector but it tells me nothing new. I've tried drivers. I did a system restore to a point prior to updates and it worked fine until I installed the new updates. These are my results from the ipconfig command:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersWhatAJoy>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : OwlAlwaysLoveU
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
View 13 Replies
View Related
Jul 28, 2012
My sister has just purchased a custom built desktop computer that will not connect to the household network. We have various other computers and devices that connect to the router (Thompson Gateway TG782T) without any problems. Just to be sure I've tried reseting the router to factory settings to no avail.
I've tried connecting her computer to the network through the TP-Link Wireless Adpater (TL-WN881ND) that came with her computer AND through a Netgear Wireless USB Adapter (WG111v2). In both situations the network is detected, the network password is requested (and accepted) but the result is always that she has 'limited connectivity', cannot access the internet and cannot detect any shared network drives.
I've tried connecting with an Ethernet cable as well, which her computer does not detect at all ('network cable unplugged').When I try to troubleshoot any of these problems I get a message that says 'The Diagnostics Policy Service is not running'.The guys at the shop where my sister had it built are asking her to bring the computer in with the router becuse they are convinced that the machine is fine, and that the router is at fault. Some Specs for her computer
-------------------
Windows 7 Professional
Service Pack 1
Processor: Intel(R) Core(TM) i-7-3770 CPU @3.40GHz 3.90 GHz
RAM: 16.0 GB[code]....
View 6 Replies
View Related
Jul 24, 2011
i reformatted my computer 1 month ago, when i try to connect with ethernet cable it doesn't connect, but when i use the usb cable which i got with my modem it connects.btw i have a acer e389 which runs on XP(media center).
View 9 Replies
View Related
Dec 12, 2012
Ive been using an Ethernet cable to connect to the Internet for a while now, it was working fine up to yesterday where I left my desktop open for a few hours and came back to find that I have no Internet connection.
I used my laptop to test the cable out and it works fine, the wireless works fine too. There doesnt seem to be anything wrong with the modem since I still have Internet on the PS3. I used a different cable to test the modem again with my laptop and I had internet access. The desktop is still connected to the modem but it only gives me a network connection with no Internet.
I tried restarting the modem but it still wouldnt work and I also tried to disable then enable the connection.
Im using Realtek PCIe GBE Family Controller with the latest driver.
View 16 Replies
View Related
Jul 16, 2012
We put an addition onto our house about 7 years ago and ran Cat5 throughout it. Now when I talked to the electrician about how to route our internet through it, he said the Cat5 with RJ45 connectors was set-up for phone, not internet. I was looking around the house and could not find a rack or central location to plug a modem into. We have RJ11 ports in each of the wall sockets so I am slightly confused.Is there a way to switch these connectors over to use for internet instead of phone? How would I hook up my modem to these ethernet ports? My plan would be to hook up two wireless routers from these ethernet ports.This problem comes to be because our house is solid plaster walls covered with bookshelves and the router (a nice wireless-n) does not even penetrate half the house.
View 4 Replies
View Related
Aug 22, 2011
I was having a problem with my computer so I did a system restore to fix it.It failed the first time. I also disabled my anti virus first. I tried in safe mode and it worked. So obviously something stopped it from working though I'm not sure. Anyway when I logged back into my account my wireless connection said I had no Internet access and the troubleshooter said the dns server isn't responding. I don't know how to fix it. I've tried updating the driver, uninstalling/reinstalling the adapter, enabling/disabling it, connecting/disconnecting from the connection, trying the connection in another account as well as safe mode and nothing has worked.
View 3 Replies
View Related
Nov 14, 2011
I'm having to use my desktop because my laptop(Toshiba Sattelite...runs on Windows 7) now has NO CONNECTIVITY. It goes from "Limited" to "No" connectivity. I have it hooked directly up the router now and NOTHING. I'm not sure of what to do. The command prompt doesn't work. I typed "ipconfig /all" then the next command was "ipconfig /release" and I got three lines of errors. DHCP is enabled only under the "I-E NIC" Everywhere else it is not enabled. When I hover my mouse over the bars at the far right of the status bar it says my wifi name and under it says "no internet access," HOWEVER, when I click on it...my wifi name is at the top and it says in bold letters CONNECTED.
View 1 Replies
View Related
May 16, 2012
I have my PC connected to the internet by way of a USB WiFi dongle, tapping into the neighbours internet access (with permission).Obviously, this leaves my RJ45 Ethernet connection on the PC, free and unused.I have a CCTV system also, which, if to get the most out of it, requires an internet connection via RJ45 Ethernet.Is it possible to allow my CCTV system access to the internet via Ethernet, connected to my PC, and then using the WiFi dongle access which the PC is already using, also?If so, how would one do this, after physically connecting the Ethernet cable between the PC and the CCTV system DVR?
View 1 Replies
View Related
Sep 12, 2011
[code]....
I've been trying for two weeks now to connect to the internet but can't. This suddenly happened on a Monday after I got home from work. Up until that point, I have had no problems. At first I thought it was my cable, but when I plug the cable into my brother's PC, it works. Then thinking it could be my network card, he picked up a wireless card for me, but still no go. I've searched these forums and many forums over the internet and tried many things but I still have no luck. I've scanned for viruses and malware but nothing has turned up.
I have Norton anti virus but installed Adaware per recommendation to double check. I also used Malware Bytes. On Xirrus, I clicked the ping test and everything showed as pass but still, low connectivity. I get that even when I plug in the cable. When I look at my connection status under activity, the bytes sent and received are in the low thousands.I have only a very basic understanding of networks. [code]....
View 4 Replies
View Related
May 10, 2012
Wireless internet isn't working. The drivers aren't installed, and it never came with a cd so the only way I can install them is if i connect to the internet which i cant. I am thinking i need to download the drivers to a disk drive and then transfer them. Another possibility is, i somehow have a rogue virus on my computer ( probably julia who ruins everything )anyways it's called pc optimizer pro. I don't have an internet so i cant get any programs, but i got hijack this and TFC malware bytes and zone alarm security already on my computer.
View 1 Replies
View Related
