Cabling / Cards :: Connected To Network But No Internet Connectivity?
Jun 30, 2011
WOke up this morning and my desktop will connect to the router via LAN and WLAN, but states that there is no external internet connectivty.I know this isn't the case as my MAC will connect via WLAN and LAN (same ethernet cable) and I can access external sites. My router is therefore working correctly and my internet connection is fine.I presume this must be some kind of driver issue, but it states that my drivers are installed, up to date and working correctly
View 11 Replies
ADVERTISEMENT
Aug 24, 2011
I am working on my Mom's computer so I will need to download any files to a flashdrive to transfer. Her Compaq CQ5110Y Vista 32/bit pk 1 has lost it's network. I also just discovered a Trojan Horse Dropper in the BSTQBackA file. Did I mention I know nothing about this tech stuff? Norton states some files cannot be healed?
View 3 Replies
View Related
Jan 25, 2012
I have a client who has 4 computers in the house all running wireless. 2 desktops and 2 laptops. One of the laptops is running XP and after 5-10 minutes of surfing, the internet stops working while all the other computers retain a good internet connection. Repairing the connection via the taskbar icon fixes it temporarily until the issue reoccurs.
View 10 Replies
View Related
Sep 12, 2011
[code]....
I've been trying for two weeks now to connect to the internet but can't. This suddenly happened on a Monday after I got home from work. Up until that point, I have had no problems. At first I thought it was my cable, but when I plug the cable into my brother's PC, it works. Then thinking it could be my network card, he picked up a wireless card for me, but still no go. I've searched these forums and many forums over the internet and tried many things but I still have no luck. I've scanned for viruses and malware but nothing has turned up.
I have Norton anti virus but installed Adaware per recommendation to double check. I also used Malware Bytes. On Xirrus, I clicked the ping test and everything showed as pass but still, low connectivity. I get that even when I plug in the cable. When I look at my connection status under activity, the bytes sent and received are in the low thousands.I have only a very basic understanding of networks. [code]....
View 4 Replies
View Related
Jan 1, 2011
I have the following equipment/software: Acer Aspire One running Windows XP SP3, Artheros AR5007EG wireless network adapter, Realtek RTL8102E PCI NIC, Cisco Linksys E1000 Router.The Wireless Network Connection status says that I'm connected to my network with a full signal strength but I cannot get out to the internet and I cannot ping the router from that computer. I can, however, get to the internet via a wired connection to the router via the Realtek NIC. This has been the only computer that I've been unable to connect to my network and to the internet. It was connected to a different router before and connected easily but that router went bad so I replaced it with the E1000.Don't know if it's the wireless adapter that's bad or something else.
View 1 Replies
View Related
Mar 29, 2012
It is a Dell Inspiron using Windows 7 and the internet has suddenly stopped working on it. It is able to connect to the router fine and says it has a connection but is unable to access anything. And this is accessing the router either wirelessly or wired through an ethernet cable. I know that it is not the router because her roommates are able to access the internet fine and her computer is also unable to access the internet from other networks. Is it possible that the network card in her laptop has died and needs to be replaced? or could it be a corrupted driver? Would using a usb network adapter be a temporary fix? I have searched many forums trying to find an answer but have been unable to.Also a couple times when attempting to see if the wired connection worked I had plugged in the ethernet cable and was able to access google for 5 seconds and then it stopped working, and then unplugging and reconnecting would yield the same results
View 3 Replies
View Related
May 6, 2011
ok so ive been messing with my aunts desktop trying to get it to run online.
her network adapter SAYS its connected but when i try to actually go online it says its not connected.
i checked the connection and it does say its connected. it is a fresh install and i reinstalled the driver for the internet.
ive unchecked the automatic config for the net options (saw in some suggestions)
View 4 Replies
View Related
Aug 30, 2012
I have 300Mbps PCI wireless LAN network card which I installed in my PC and until today I was connected to my Sky router wirelessly. I also have a wireless Brother all in one connected to the same PCI card.
The engineer who installed my Sky fibre broadband told me in order to achieve maximum speeds I should connect via an ethernet cable to my Sky router as wireless could be a lot slower so I bought one and connected up and disabled the wirelss card. All good so far until I noticed my Brother all in one was complaining about no network ID.
My problem is that I can't seem to run my printer wirelessly as well as run my broadband wired. If I enable the wireless adapter the printer works but my broadband is wireless as well and the wired connection is disabled.
View 5 Replies
View Related
May 18, 2011
I recently purchased a Belkin F5D8053 N Wireless USB Adapter after my 6 year old adapter was unable to see my home network in the network list.
I installed the software but the adapter wouldn't connect to my home network so I reinstalled and updated the driver, still wouldn't work. Finally about 2 hours later it just randomly connected. Now it has been frequently (1-2 times a day) losing connection to my home network for around 3 hours, it can see a dozen networks in the list with full signal strength but won't connect to any at all then connects to my home network again several hours later.
I have switched between the Windows connector and the Belkin one and tried all 6 USB slots with no luck. I contacted Belkin support and they told me to try the device on another computer and see if the problem still happens but I don't have another computer to test it with.
I suspect this is a problem with my Windows installation rather than the hardware or router as my old card would freeze once every couple of days and was only fixed by powering off my computer as Windows was unable to kill the process to restart it.
View 4 Replies
View Related
Oct 8, 2012
i can search for networks. As you can tell i am currently on the internet on my laptop. I can search for the current network i am on through my adapter. I then connect to it. It says im connected to a unidentified network. It will not let me search the internet or anything else.
View 9 Replies
View Related
Sep 9, 2012
I thought i would clever and make an extension from my Virgin Superhub via Ethernet to a second pc that is currently using Wireless to improve speed.The amazing thing is the ethernet cable I made up actually seems to work but only when my wireless connection is on. If I disable my wireless to use just the ethernet I get no connection showing!If I click on properties it shows I am connected at 100mbps but I presume this is just the connection between the Hub and the pc although my Internet connection dialog also shows 100mbps.In the Services dialog I can add services which I presume would give me access.I have my ip address but do not know the name of the service I should be running (DCHP?) or the Port numbers.In addition to this there doesn't seem to be a network card appearing in device manager other than the wireless dongle.
View 5 Replies
View Related
Nov 4, 2011
I have a compaq preario running on windows 7 ultimate.It has been working well with the internet connection but recently it stopped connecting to the internet.It recognizes other computers in the network but the internet connection is not available.
View 1 Replies
View Related
Jul 29, 2011
My Internet connection works completely fine when all I have is my laptop connected to the wifi, but when my desktop also connects to the internet, than my laptop's internet doesn't work at all until i shut the desktop down.
View 2 Replies
View Related
Apr 24, 2012
I have wireless connectivity, but my ethernet local area post will not work. Pinged 198.168.1.1 but got 4 timed out messages. Checked hardware condition and the controller card says it is functioning properly. Running Network Properties shows only the wireless connections, with Local Area Port disconnected.
View 16 Replies
View Related
Oct 26, 2012
so the problem started with the normal limited connectivity, i was given the laptop and tried to rectify the problem using ip resets renew, release, ipvc reset, winsock reset and it wouldnt budge,if i leave the ipv4 settings to automatic it will not display the ssid of the router, it will connect to it but display unidentified network, if i enter the ip address dns e.t.c then it will display the router but it will still not connect to the internet, i have tried updating drivers, removing all drivers and letting windows rediscover and install driver.i have also tried installing an internet dongle, the laptop will pickup the dongle, install the software but then display no connection.
I then tried installing a belkin wirless adapter but since the software is only up to vista i dont believe it has worked. ( everything installed ok but still will not connect to the internet) i am also finding out that it is not getting proxy details either. and on occasions i will get limited connectivity or the adapter will refuse to connect to the router.i have run xirrus wifi inspector on both my laptop (working) and his laptop (not working)the signal strength runs from about -44db too -50db which is strong enough but the automatic ip address differ alot according too xirrus these are the results
My Ip 192.168.1.75
My DNs 192.168.1.254
my gateway 192.168.1.254
His IP 169.254.72.206
His DNs N/a
[code]....
View 10 Replies
View Related
Aug 24, 2011
i have 2 laptop with wifi and ethernet and a pc with ethernet. so can i connet these 3 together in this condition: first laptop to second laptop with wifi, and second laptop to pc with wire. so i can play game 3 together or connect internet all to one internet and etc...can the second laptop be server?i dont have hub, router and adapter. i have only cable.
View 3 Replies
View Related
Aug 1, 2012
I have an Eee-PC and im trying to connect to the internet via my HUAWEI E173 MOBIEL INTERNET STICKWhen I plug it in it reds it, but only like a mass storage device.
View 3 Replies
View Related
Oct 1, 2011
A few weeks ago, i noticed that my desktop was unable to access the internet, even though it shows that it is connected. i eventually decided taht it must have been a hardware issue, so i bought a new motherboard. after installing the motherboard, an a fresh installation on Windows, i saw after the drivers were installed that the same thing was happening. I pinged sites, and i got no losses on data. i also did a tracer, and it showed me that it is in fact connecting.
I noticed that when I connect the pc to the network(it is always via cable) it recognizes the network as "network", whereas if i use the same connection for my laptop, it brings up the network as "NETGEAR", which is, in fact, my network's name.
View 12 Replies
View Related
Apr 1, 2013
I have a fee pcs at home...all are able to connect to the internet but theres only one thats not able to...the network and connection centre keeps and changing from identifying to not connected. The cable itself is fine.
View 13 Replies
View Related
Dec 30, 2011
I can open files, play videos, run programs, etc. Windows installed without a problem.However, I can't connect to the Internet. At all. I can't even register my version of Windows because I can't contact Microsoft for verification, because the connection won't get through. No Internet devices can be detected.That was with a long cable wired directly to our router, which is next to our modem.So, today, I bought a D-Link Xtreme N Desktop PCI adapter to connect. Still no connection... I don't think the PC even detects the adapter, because the drivers coming with the adapter can't detect it, and the light on the adapter doesn't turn on.That shouldn't happen. Both the cable and adapter go directly into the motherboard. My operating system is Windows 7 Ultimate 64-Bit, and my motherboard is an Asus P8Z68-V PRO.My ISP is Cogeco. All other computers and wireless devices in the house work perfectly fine.
View 2 Replies
View Related
Sep 30, 2012
My acer aspire 4736z can not use anymore internet even tough the wifi icon says its connected. I can use cable. should I download a new wifi adapter? My adapter is Atheros AR928x wireless net work adapter.
View 1 Replies
View Related
Apr 6, 2011
I am having this same issues only because mine doesn't show any network devices in device manager under network adapters.
View 3 Replies
View Related
Apr 3, 2012
Three days ago people started complaining that it seemed slow. It's supposed to be 100mbps fully switched, but I'm getting speeds of 2mbps - 12mbps (at most) between two workstations on the same switch (which is just insane). I did happen to notice on a couple of the Mac OS X machines that the send and receive errors are off the charts (50% - 80% error rate)!!! This seems a bit suspicious to me.
View 13 Replies
View Related
Nov 22, 2011
I have just upgraded my pc with a new motherboard and am trying to get it online however when I try to install my D-link router I get "get adaptersinfo failed." I checked device manager and the network adapter says "this device cannot start. (code10) I have been trying really hard to find the driver updates I need but have only come across broken links and false downloads.In device manager It is called Realtek RTL8168/8111 Family PCI-E Ethernet Nic (NDIS 6.0)If i use hardware helper to see the driver that needs updating it is called Realtek GbE & FE Ethernet PCI-E NIC Drivers.
View 7 Replies
View Related
Feb 26, 2012
I was also struggling with locale area net work.. When i have installed fresh window into my PC. The Locale area plugen showing but no internet conection found. I have restart my PC couple of times while sitting my different internet provider connections. Alteas i have reinstall my window xp so i guess may be its my window problem it have missing some files.
View 1 Replies
View Related
Aug 31, 2012
I just got a new laptop. Like, just yesterday, but for some odd reason it can't connect to the internet in the living roomMore Info:Laptop bought yesterday. Absolutely new. Samsung, A6 Vision, Windows 7. It can hold to 480GB I think or at least around and has 6GB Ram. I brought it home, made the default brower Google Chrome and connected it to the home internet and entered in the security key/password, so it's all connected. IN the living room, the connection is really good. All the other laptops there -even my really bad old one can connect fine to the internet. My new one says it's connected, but no internet. But since the other ones get internet, I don't think I need to restart the router -although I did so anyways and it didn't work
View 1 Replies
View Related
Jun 20, 2012
I just bought a used laptop and everything seems to work fine except the wireless. I sometimes can't find networks that I know are there but this can be fixed sometimes by restarting. The biggest problem I have is the internet speeds are really slow. I'm running on an N router and I am only getting about 100kb/s when my other laptop is getting about 600kb/s to 1mb/s. I have no clue what is wrong. I was thinking of trying to change the wireless card but I don't want to be hasty.
View 6 Replies
View Related
Mar 6, 2011
After pconfig /renew (I get this error) No operation can be performed on pth while it has its media disconnected. An error occurred while renewing interface local area connect an operation was attempted on something that was not a socket.
I am also trying to wipe it but no not have XP disc and no one I know does either so what is the safest way?
View 7 Replies
View Related
Jun 29, 2011
We have 3 units of computer in our house uses a router and a 8port switch hub. The unit i am using can connect directly to the internet but cannot be mapped in lan. I tried pinging and i already assigned IP addresses in all units but still nothing happen. I already done format and cloned from the other unit.
View 3 Replies
View Related
Jan 28, 2012
i bought a netgear for my laptop and when trying to connect to it,i get through the connections to the setup and then it says that it detects a static ip address.
View 1 Replies
View Related
Aug 13, 2012
i am having a problem with my desktop right now, just recently i re-installed Windows7, a clean format... but then i suddenly noticed that i cant connect to the internet, no network adapters are detected on the Network Connections, its empty i looked at the Device Manager and saw a yellow warning on realtek rtl8139/810x family fast ethernet nic, i download the driver using my laptop (wireless connection)... and installed that driver on my desktop pc then checked the device manager once again, but it still has a yellow warning.i dont know what to do anymore, and at the last screenshot theres this error message: This device cannot find enough free resources that it can use. (Code 12) If you want to use this device, you will need to disable one of the other devices on this system.i have two lan cards, one at the motherboard(not in use) and the other PCI-E lan card (tp-link ) ...im just wondering if that Realtek i just installed is the lan driver for the motherboard?
View 2 Replies
View Related
Jun 16, 2011
I just moved into a new apartment and I bought a usb wireless adapter so I could make use of the virgin media broadband. I've only ever used the internet on this computer via my ethernet connectionI installed the network adapter with no problem (using the CD included in the box) and it appears in my device manager and is working correctly. However, when I look look at the available networks I can only find BT Openzone (it's a pay as you go service, I'm using it now to try and fix this ), and some random BTHomeHub. I should be able to see a lot more, including my Virgin Media network, but I can't. It was the best 'Dongle'[?] in the store, so I'm guessing it's not an issue of proximity. I'm also certain that the network should be publicly visable. [CODE]
View 7 Replies
View Related
Jun 29, 2012
I have install a new driver for the network card but the card stops working?
View 1 Replies
View Related
