Cabling / Cards :: LAN Only Works When Wireless Connected

Sep 9, 2012

I thought i would clever and make an extension from my Virgin Superhub via Ethernet to a second pc that is currently using Wireless to improve speed.The amazing thing is the ethernet cable I made up actually seems to work but only when my wireless connection is on. If I disable my wireless to use just the ethernet I get no connection showing!If I click on properties it shows I am connected at 100mbps but I presume this is just the connection between the Hub and the pc although my Internet connection dialog also shows 100mbps.In the Services dialog I can add services which I presume would give me access.I have my ip address but do not know the name of the service I should be running (DCHP?) or the Port numbers.In addition to this there doesn't seem to be a network card appearing in device manager other than the wireless dongle.

View 5 Replies


ADVERTISEMENT

Cabling / Cards :: Modem Only Works With Router

May 8, 2011

My problem is that my desk top computer only gets the internet when my modem is plugged into my router and the router plugged into the computer.If i unplug the router and just go modem to computer it tells me its not plugged in.

View 19 Replies View Related

Cabling / Cards :: Network Card Works Only After Reboot?

Jul 19, 2011

I have a desktop pc and my connection to the internet is via a router. I cannot get my nic card to work but only after a reboot! When it first boots up, the card isn't even shown on the device manager. After a reboot, everything works great. Already tried another nic card but it cannot get an ip address and the connection shows a yellow exclamation mark with "no or limited connectivity!"

View 7 Replies View Related

Cabling / Cards :: Seem To Be Connected To Router But Can't Get To Internet

Jan 1, 2011

I have the following equipment/software: Acer Aspire One running Windows XP SP3, Artheros AR5007EG wireless network adapter, Realtek RTL8102E PCI NIC, Cisco Linksys E1000 Router.The Wireless Network Connection status says that I'm connected to my network with a full signal strength but I cannot get out to the internet and I cannot ping the router from that computer. I can, however, get to the internet via a wired connection to the router via the Realtek NIC. This has been the only computer that I've been unable to connect to my network and to the internet. It was connected to a different router before and connected easily but that router went bad so I replaced it with the E1000.Don't know if it's the wireless adapter that's bad or something else.

View 1 Replies View Related

Cabling / Cards :: Connected To Network But No Internet Connectivity?

Jun 30, 2011

WOke up this morning and my desktop will connect to the router via LAN and WLAN, but states that there is no external internet connectivty.I know this isn't the case as my MAC will connect via WLAN and LAN (same ethernet cable) and I can access external sites. My router is therefore working correctly and my internet connection is fine.I presume this must be some kind of driver issue, but it states that my drivers are installed, up to date and working correctly

View 11 Replies View Related

Cabling / Cards :: Connected But Unable To Access Internet?

Mar 29, 2012

It is a Dell Inspiron using Windows 7 and the internet has suddenly stopped working on it. It is able to connect to the router fine and says it has a connection but is unable to access anything. And this is accessing the router either wirelessly or wired through an ethernet cable. I know that it is not the router because her roommates are able to access the internet fine and her computer is also unable to access the internet from other networks. Is it possible that the network card in her laptop has died and needs to be replaced? or could it be a corrupted driver? Would using a usb network adapter be a temporary fix? I have searched many forums trying to find an answer but have been unable to.Also a couple times when attempting to see if the wired connection worked I had plugged in the ethernet cable and was able to access google for 5 seconds and then it stopped working, and then unplugging and reconnecting would yield the same results

View 3 Replies View Related

Cabling / Cards :: Laptop Not Working When Desktop Is Connected

Jul 29, 2011

My Internet connection works completely fine when all I have is my laptop connected to the wifi, but when my desktop also connects to the internet, than my laptop's internet doesn't work at all until i shut the desktop down.

View 2 Replies View Related

Cabling / Cards :: Local Area Connection Not Connected

Apr 24, 2012

I have wireless connectivity, but my ethernet local area post will not work. Pinged 198.168.1.1 but got 4 timed out messages. Checked hardware condition and the controller card says it is functioning properly. Running Network Properties shows only the wireless connections, with Local Area Port disconnected.

View 16 Replies View Related

Cabling / Cards :: Network Adapter Shows Connected But No Connection?

May 6, 2011

ok so ive been messing with my aunts desktop trying to get it to run online.

her network adapter SAYS its connected but when i try to actually go online it says its not connected.

i checked the connection and it does say its connected. it is a fresh install and i reinstalled the driver for the internet.

ive unchecked the automatic config for the net options (saw in some suggestions)

View 4 Replies View Related

Cabling / Cards :: Wireless Usb Drives

Jun 6, 2012

Can I use ONE wireless usb adapter for two computers? Of course not at the same time but I was wondering if it is possible? Also, do I need to have the disc to install it or will the 2nd computer I want to use the wireless usb adapter for prompt me to install the software when I put it in the usb drive? I have misplaced the cd the usb adapter came with which is why I am askinit is a laptop and I know I can use ad hoc but I am trying to set up wireless on that laptop without ad hoc.

View 2 Replies View Related

Cabling / Cards :: 802.11n Wireless LAN Card Update?

Dec 10, 2011

Driver software is from 2009 and it says there are no updates found,. RALINK TECH. CORP is the manufacturer and microsoft is the driver supplier, although neither website has anything for my piece of equipment (i have installed updates from both of them and my driver software is the same as before). How do I find updates for these drivers? When I search online all I get is driver update programs that cost money to use.

View 3 Replies View Related

Cabling / Cards :: Any Point In Getting N Wireless USB Upgrade

Jun 30, 2012

I have a Dell laptop with a Wireless-G modem built in. Is there any point in getting a USB Wireless-N modem to speed up the overall connection? I don't know if my Cox cable modem service is even fast enough for it to matter.

View 4 Replies View Related

Cabling / Cards :: Wireless Not Detecting Networks?

Jan 2, 2012

I have attached screen prints in various formats.The machine is a PB Easynote TM01 laptop running Win 7, using built in wireless and for some time I have been exeriencing hit and miss internet/network wireless connections.With my limited knowledge I have managed to identify that two of the network adapters are not showing in Device Mnaager when there is NO connection but are showing when there IS a connection.I think this indicates a faulty (or knackered) network adapter.I now have no connection whatsoever and haven't for about a week.I have plugged the machine into the modem now and internet is fine, but what is the point of having a laptop that can't sit on your lap when it is plugged in.

View 7 Replies View Related

Cabling / Cards :: Replacing The Wireless Card

Dec 28, 2011

My wireless card on my gateway laptop isn't working anymore.I have already tried uninstalling and all of that. I am just going to replace it. I currently have a Intel 3945ABG network card. Is there another network card I can replace it with that is more efficient and quicker? Not sure what other information is needed to figure out what network cards are compatible.

View 2 Replies View Related

Cabling / Cards :: Wireless Card Not Turning On At All

Nov 1, 2011

My girlfriend's computer has quite suddenly developed the problem that the wireless card simply will not turn on.She has an Asus Notebook G60 Vx Series, which has a switch on the front as well as Fn+F2 for turning wireless on/off. Yesterday, she noticed it wasn't working even though the switch was "on", but was able to use Fn+F2 to enable it. Today, neither will work. It simply won't turn on.Ethernet works fine when connected directly to the router. Device manager detects "Intel(R) WiFi Link 5100 AGN" as working correctly and drivers as up-to-date.I feel like this must be a software/driver problem, but everything seems to be checking out. [code]

View 8 Replies View Related

Cabling / Cards :: Can't Use Wireless Connection (HP Nc6120)

Dec 17, 2011

I have a HP nc6120 laptop and I recently switched the hard drive. I installed Windows XP professsional and downloaded drivers from HP homepage (also did a BIOS update)

Local connection via cable is OK (broadcom netxtreme gigabit ethernet) but there isn't wireless connectivity. I downloaded all the wireless drivers, but still HP wireless assistant offers only Bluetooth connection and there isn't a wireless card on the device manager list.

Some time ago, as I formatted my previous drive and downloaded the same drivers from HP homepage, the wireless connection worked like a charm

View 2 Replies View Related

Cabling / Cards :: Wireless Card Can Only Detect Ad Hoc Networks

Oct 18, 2011

Now my problem started happening after my desktop computer got unplugged. When I booted back up, I was unable to connect to my access point. Or find any of the other networks it can always see. I took my laptop and set up an ad hoc network and it came right up. The wireless access point has not been changed and it is perfectly fine. I've updated the drivers from Ralink, nothing. Uninstalled and rebooted, nothing. Checked the BIOS for any settings, nothing. Made sure the radio was turned on, nothing.

View 6 Replies View Related

Cabling / Cards :: Wireless N Card To Net-gear G Router

Jan 28, 2011

I purchased a computer with a pre-installed wireless card which was stated to be b/g/n compatible. When I go to setup a connection to the wireless network (through a Netgear WGR614 v8 router), it has no problem detecting it with a full five bars. However, when it prompts me to enter the password I do, but immediately afterwords another password box appears prompting me to reenter the password again. After repeatedly doing so, it will eventually say the password is incorrect. I know the it is correct because I've since purchased a Netgear USB adapter for temporary purposes and it connects using the password. I've even accessed the router to ensure the password I was using was correct and it is.

View 2 Replies View Related

Cabling / Cards :: Keeps Wireless Connectivity But Loses Internet?

Jan 25, 2012

I have a client who has 4 computers in the house all running wireless. 2 desktops and 2 laptops. One of the laptops is running XP and after 5-10 minutes of surfing, the internet stops working while all the other computers retain a good internet connection. Repairing the connection via the taskbar icon fixes it temporarily until the issue reoccurs.

View 10 Replies View Related

Cabling / Cards :: Unable To Detect Wireless Network

Jun 16, 2011

I just moved into a new apartment and I bought a usb wireless adapter so I could make use of the virgin media broadband. I've only ever used the internet on this computer via my ethernet connectionI installed the network adapter with no problem (using the CD included in the box) and it appears in my device manager and is working correctly. However, when I look look at the available networks I can only find BT Openzone (it's a pay as you go service, I'm using it now to try and fix this ), and some random BTHomeHub. I should be able to see a lot more, including my Virgin Media network, but I can't. It was the best 'Dongle'[?] in the store, so I'm guessing it's not an issue of proximity. I'm also certain that the network should be publicly visable. [CODE]

View 7 Replies View Related

Cabling / Cards :: No Wired Or Wireless Internet Connection?

Jul 28, 2012

My sister has just purchased a custom built desktop computer that will not connect to the household network. We have various other computers and devices that connect to the router (Thompson Gateway TG782T) without any problems. Just to be sure I've tried reseting the router to factory settings to no avail.

I've tried connecting her computer to the network through the TP-Link Wireless Adpater (TL-WN881ND) that came with her computer AND through a Netgear Wireless USB Adapter (WG111v2). In both situations the network is detected, the network password is requested (and accepted) but the result is always that she has 'limited connectivity', cannot access the internet and cannot detect any shared network drives.

I've tried connecting with an Ethernet cable as well, which her computer does not detect at all ('network cable unplugged').When I try to troubleshoot any of these problems I get a message that says 'The Diagnostics Policy Service is not running'.The guys at the shop where my sister had it built are asking her to bring the computer in with the router becuse they are convinced that the machine is fine, and that the router is at fault. Some Specs for her computer

-------------------
Windows 7 Professional
Service Pack 1

Processor: Intel(R) Core(TM) i-7-3770 CPU @3.40GHz 3.90 GHz
RAM: 16.0 GB[code]....

View 6 Replies View Related

Cabling / Cards :: Wireless Network Adapter Missing

Apr 11, 2012

PC experienced a 2sec power outage today and now the Wireless Network Adapter is missing from device manager. I've tried rebooting several times but no success.All other devices I have in the house can all connect to the router with no problems.

View 11 Replies View Related

Cabling / Cards :: Run Wired And Wireless Connectivity Simultaneously?

Aug 30, 2012

I have 300Mbps PCI wireless LAN network card which I installed in my PC and until today I was connected to my Sky router wirelessly. I also have a wireless Brother all in one connected to the same PCI card.

The engineer who installed my Sky fibre broadband told me in order to achieve maximum speeds I should connect via an ethernet cable to my Sky router as wireless could be a lot slower so I bought one and connected up and disabled the wirelss card. All good so far until I noticed my Brother all in one was complaining about no network ID.

My problem is that I can't seem to run my printer wirelessly as well as run my broadband wired. If I enable the wireless adapter the printer works but my broadband is wireless as well and the wired connection is disabled.

View 5 Replies View Related

Cabling / Cards :: AR5007EG Not Detecting Wireless Networks

Apr 19, 2012

url...My wife was using her Toshiba A215-S5837 and all of a sudden, wireless goes out. No networks to be found. I've tried any number of drivers I could find. I have also tried using the driver as suggested by many places (including the previous thread), found on the CZ site. No luck. I just tried safe mode and updating to no avail. Though Windows 7 is not kind about letting you install a driver initially. I uninstalled, and plug and play took over so I was forced to do it via update.

View 13 Replies View Related

Cabling / Cards :: Wireless Card Only Working On Second Boot Up

May 5, 2012

I built a computer a while ago, from a reasonably low budget. Ever since the very first boot up, the wireless card (TP-Link, unable to find model currently, will add later) only works on the second consecutive boot up. I have no idea why, I have not found anything relating to a problem like this, the computer doesn't even appear to know that there is a wireless card in it. Instead the icon shows a cable, suggesting that the computer isn't connecting with the card.

View 5 Replies View Related

Cabling / Cards :: MSI Laptop - Turn On Wireless Capability?

Mar 10, 2013

I have a MSI laptop and I turned on Wireless from the button and the led is now green but when I try to connect it says it is off? Btw, there is a X on the Wireless Connection in Control Panel > Network and Internet > Network Connections.

View 19 Replies View Related

Cabling / Cards :: IEEE 802.11g Wireless PCI Adapter Not Working

Jun 19, 2011

I just purchased a wireless PCI Adapter and I cannot seem to get it to work. The box states it is an Excel IEEE 802.11g Wireless PCI Adapter. I have inserted it into the appropriate slot and when I start up Windows the device driver states that it has not installed correctly.The device driver is: Marvell Libertas 802.11b/g Wireless LAN Client Adapter. On my device manager list it has an error tag and when opened it comes up with the following message:This device cannot start (Code 10)I have tried to update the device, but I still get this error message and I have attempted to download new drivers off the internet but am unsure about what I am doing.

View 7 Replies View Related

Cabling / Cards :: Vista Not Recognizing New PCI Wireless Network Adapter?

Jan 1, 2011

I am having similar problems on Vista. How is the driver installation different in Vista?

View 1 Replies View Related

Cabling / Cards :: Have To Re-boot Computer For Wireless Card To Be Recognized?

Dec 10, 2011

Have to re-boot computer for wireless card to be recognized

View 19 Replies View Related

Cabling / Cards :: No Wireless Network Adapter Installed And Configured

Apr 28, 2011

We moved to a different city and trying to access any available network but can't connect. Says no network found. I click diagnose and it says "This computer does not have a wireless network adapter installed and configured"

View 1 Replies View Related

Cabling / Cards :: Wireless - Have Very Good Signal But Slow Speeds

Nov 20, 2011

I've been having the same issue. I'll start my laptop and it will start connecting to my home network (comcast docsis 3.0 modem to dlink dir 655 router) and be cool upstairs next to the router, but when I move downstairs the speed jumps down from 130 to 117 to 78 to 5.5 mbps. Its holding steady at 117mbps right now. I'm thinking of upgrading my router to a DIR 827 hd media router 2000 so I can get dual coverage and less interference.

View 1 Replies View Related

Cabling / Cards :: Unable To Connect To The Internet Through Wireless Router

Jan 19, 2013

I am unable to connect to the internet through my wireless router. However, I can connect using neighbor's wireless connection and other laptops in my home are able to connect to the internet using MY wireless connection. The problem started suddenly, I used to be able to connect, then I had the problem so I rebooted and that resolved the issue temporarily. I tried disabling the wireless adapter card then rebooting, this did not work. I also unchecked the TCP/IPv6.

View 4 Replies View Related

Cabling / Cards :: Wireless Card Suddenly Dropping Signal?

Jan 24, 2012

I have a pci wireless card that I have been using with the same router for some time. All of a sudden in the last couple of weeks it suddenly developed some habbit of dropping the signal from the router on random intervals. During the times that it does it, it will do it over and over again for hours sometimes.It will connect, then drop off less than a minute later, then reconnect again. It will just suddenly say "No Connections available",when normally there are at least 3 connections displayed in the list(2 neighbors and 1 mine).

I am using Windows 7 64 bit and I just now did a fresh reformat on the hard drive an hour or so ago to try and rule out the option of conflicting software/drivers/malware and so on. The problem seems to be persisting still.I have the latest drivers that I can find for my card and updated firmware on the router(same exact setup I have always used).

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved