We have 3 units of computer in our house uses a router and a 8port switch hub. The unit i am using can connect directly to the internet but cannot be mapped in lan. I tried pinging and i already assigned IP addresses in all units but still nothing happen. I already done format and cloned from the other unit.
View 3 RepliesI have an Eee-PC and im trying to connect to the internet via my HUAWEI E173 MOBIEL INTERNET STICKWhen I plug it in it reds it, but only like a mass storage device.
View 3 Replies View RelatedI have a fee pcs at home...all are able to connect to the internet but theres only one thats not able to...the network and connection centre keeps and changing from identifying to not connected. The cable itself is fine.
View 13 Replies View RelatedI can open files, play videos, run programs, etc. Windows installed without a problem.However, I can't connect to the Internet. At all. I can't even register my version of Windows because I can't contact Microsoft for verification, because the connection won't get through. No Internet devices can be detected.That was with a long cable wired directly to our router, which is next to our modem.So, today, I bought a D-Link Xtreme N Desktop PCI adapter to connect. Still no connection... I don't think the PC even detects the adapter, because the drivers coming with the adapter can't detect it, and the light on the adapter doesn't turn on.That shouldn't happen. Both the cable and adapter go directly into the motherboard. My operating system is Windows 7 Ultimate 64-Bit, and my motherboard is an Asus P8Z68-V PRO.My ISP is Cogeco. All other computers and wireless devices in the house work perfectly fine.
View 2 Replies View RelatedI have a Windows 7 based Dell computer and it can connect to the wifi but not the internet. I have 2 android phones and ASUS netbook with Windows 7 Starter that have internet access.I've tried the netsh commands as admin. I did download Xirrus WiFi Inspector but it tells me nothing new. I've tried drivers. I did a system restore to a point prior to updates and it worked fine until I installed the new updates. These are my results from the ipconfig command:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersWhatAJoy>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : OwlAlwaysLoveU
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
My sister has just purchased a custom built desktop computer that will not connect to the household network. We have various other computers and devices that connect to the router (Thompson Gateway TG782T) without any problems. Just to be sure I've tried reseting the router to factory settings to no avail.
I've tried connecting her computer to the network through the TP-Link Wireless Adpater (TL-WN881ND) that came with her computer AND through a Netgear Wireless USB Adapter (WG111v2). In both situations the network is detected, the network password is requested (and accepted) but the result is always that she has 'limited connectivity', cannot access the internet and cannot detect any shared network drives.
I've tried connecting with an Ethernet cable as well, which her computer does not detect at all ('network cable unplugged').When I try to troubleshoot any of these problems I get a message that says 'The Diagnostics Policy Service is not running'.The guys at the shop where my sister had it built are asking her to bring the computer in with the router becuse they are convinced that the machine is fine, and that the router is at fault. Some Specs for her computer
-------------------
Windows 7 Professional
Service Pack 1
Processor: Intel(R) Core(TM) i-7-3770 CPU @3.40GHz 3.90 GHz
RAM: 16.0 GB[code]....
I just got a new laptop. Like, just yesterday, but for some odd reason it can't connect to the internet in the living roomMore Info:Laptop bought yesterday. Absolutely new. Samsung, A6 Vision, Windows 7. It can hold to 480GB I think or at least around and has 6GB Ram. I brought it home, made the default brower Google Chrome and connected it to the home internet and entered in the security key/password, so it's all connected. IN the living room, the connection is really good. All the other laptops there -even my really bad old one can connect fine to the internet. My new one says it's connected, but no internet. But since the other ones get internet, I don't think I need to restart the router -although I did so anyways and it didn't work
View 1 Replies View RelatedAfter pconfig /renew (I get this error) No operation can be performed on pth while it has its media disconnected. An error occurred while renewing interface local area connect an operation was attempted on something that was not a socket.
I am also trying to wipe it but no not have XP disc and no one I know does either so what is the safest way?
i bought a netgear for my laptop and when trying to connect to it,i get through the connections to the setup and then it says that it detects a static ip address.
View 1 Replies View RelatedI have my PC connected to the internet by way of a USB WiFi dongle, tapping into the neighbours internet access (with permission).Obviously, this leaves my RJ45 Ethernet connection on the PC, free and unused.I have a CCTV system also, which, if to get the most out of it, requires an internet connection via RJ45 Ethernet.Is it possible to allow my CCTV system access to the internet via Ethernet, connected to my PC, and then using the WiFi dongle access which the PC is already using, also?If so, how would one do this, after physically connecting the Ethernet cable between the PC and the CCTV system DVR?
View 1 Replies View RelatedI can connect to the internet using my neighbors wireless router but when I try to use my ethernet cable it connects me to "network 16" but the internet doesnt work. Ive tried different cables and different wall ports and that didnt work. It has been working before but I disconnected it to go somewhere and when I came back I had this problem. I use Windows 7 and Im trying to connect using Marvell Yukon 88E8057 PCI-E Gigabit Ethernet Controller.
View 8 Replies View Relatedi reformatted my computer 1 month ago, when i try to connect with ethernet cable it doesn't connect, but when i use the usb cable which i got with my modem it connects.btw i have a acer e389 which runs on XP(media center).
View 9 Replies View RelatedIve been using an Ethernet cable to connect to the Internet for a while now, it was working fine up to yesterday where I left my desktop open for a few hours and came back to find that I have no Internet connection.
I used my laptop to test the cable out and it works fine, the wireless works fine too. There doesnt seem to be anything wrong with the modem since I still have Internet on the PS3. I used a different cable to test the modem again with my laptop and I had internet access. The desktop is still connected to the modem but it only gives me a network connection with no Internet.
I tried restarting the modem but it still wouldnt work and I also tried to disable then enable the connection.
Im using Realtek PCIe GBE Family Controller with the latest driver.
I'm having to use my desktop because my laptop(Toshiba Sattelite...runs on Windows 7) now has NO CONNECTIVITY. It goes from "Limited" to "No" connectivity. I have it hooked directly up the router now and NOTHING. I'm not sure of what to do. The command prompt doesn't work. I typed "ipconfig /all" then the next command was "ipconfig /release" and I got three lines of errors. DHCP is enabled only under the "I-E NIC" Everywhere else it is not enabled. When I hover my mouse over the bars at the far right of the status bar it says my wifi name and under it says "no internet access," HOWEVER, when I click on it...my wifi name is at the top and it says in bold letters CONNECTED.
View 1 Replies View Relatedi have a dell inspiron mini 10 and i put windows xp pro sp2 on it and got all the neccesary drivers for it the problem with it is that it detects my router and everything but when it tries to connect it gets "stuck" on aquiring network adress i tried the winsock fix and everything but nothing seems to work
View 1 Replies View RelatedI am unable to connect to the internet through my wireless router. However, I can connect using neighbor's wireless connection and other laptops in my home are able to connect to the internet using MY wireless connection. The problem started suddenly, I used to be able to connect, then I had the problem so I rebooted and that resolved the issue temporarily. I tried disabling the wireless adapter card then rebooting, this did not work. I also unchecked the TCP/IPv6.
View 4 Replies View Related[code]....
I've been trying for two weeks now to connect to the internet but can't. This suddenly happened on a Monday after I got home from work. Up until that point, I have had no problems. At first I thought it was my cable, but when I plug the cable into my brother's PC, it works. Then thinking it could be my network card, he picked up a wireless card for me, but still no go. I've searched these forums and many forums over the internet and tried many things but I still have no luck. I've scanned for viruses and malware but nothing has turned up.
I have Norton anti virus but installed Adaware per recommendation to double check. I also used Malware Bytes. On Xirrus, I clicked the ping test and everything showed as pass but still, low connectivity. I get that even when I plug in the cable. When I look at my connection status under activity, the bytes sent and received are in the low thousands.I have only a very basic understanding of networks. [code]....
Today I bought a TP-Link 150 Mbps Wireless PCI Express Adapter so I can pick up the internet connection in my house from my home PC. (We use a laptop most of the time which is able to pick it up fine).I've installed the wireless adapter into the computer and installed the drivers however I receive an error message:
"The device may not be present or could have been ejected/unplugged from the system. Insert of Reinsert Now."
have had a new HP G62-234DX laptop for about 4 months now and I'm now having problems connecting to the internet via ethernet. The lights do not come up when I plug it into the port and I have already tried to download the Ethernet driver from HP but it didn't seem to install properly, tells me it only works for Windows Vista which isn't true. I checked my device manager also and saw that I only have my wireless network adapter showing which works fine because I've been connecting wireless but I need a wired connection when I do not have wifi at my university. On device manager I chose 'show hidden devices' and I saw an unnecessary amount of "Microsoft 6to4 adapters" come up which does not seem right.
View 2 Replies View RelatedEverytime i plug the cable into my PC it doesn't detect it and the helper says to insert an ethernet cable.When I go to network sharing centre and check my connections it says network adaptor unplugged.im using wireless at the moment.My pc is a packard bell ipower x9810. it was windows vista but i upgraded to windows 7, i checked the packard bell website and can't find any networking adaptors. I have also checked device manager and it says - Belkin N+ wireless USB adapter #4 NVIDIA nForce 10/100/1000 Mbps Ethernet. there is no yellow exclamation mark.
View 17 Replies View Related1) I had Windows XP 2012 Security virus that I removed. The antivirus software also removed afs.sys and afs.reg file, that I repalced from backup. I also copied and merged afs.reg Doing this got me an ipaddress for my PC.
2) I can not connect my wired desktop to the Internet. I can ping the ip address of google.com but not the url. I can also not ping ip address of netgear.com. My laptop has no problem connecting to the wireless network.
3) I ran Winsockxpfix and flushed dns and no luck. [code]
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
I have network: 20 PC's conected to a switch (ordinary switch), from switch to a router (for DHCP and internet conection), Router is connected to a cable modem.
Lately an issue arised. One PC started having problem witch connection (PC is windows 7, up to date). PC instead of 192 addres is getting 169 (i need to highlight it is a problem with only one PC). That means the PC is connected to the Router but it is not getting proper IP addres. After changig the addres to static the connection ws fine for few days and then in networc connection icon (botom right) it came up with 'unidentified network' message. I changed the patchleeds, even changed the connection with known working line (from outlet to patchpanel) and the connection was coming and going. Then I changed network card with the same resoult. I noticed strange thing: While the IP is 169 or when 'unid net' when I unplug the cable from outlet then plug back and do so couple times in one moment the connection is back and stable but only for some period of time. Cables had been re terminated with new jacks and at the patch panel. Drivers for network card are up to date.
Why is the connection coming and going?
Just had a new wifi usb adapter delivered today and tried to connect my desktop pc from my room to the bt home hub 2.0 in the kitchen. This is only 13meters max to walk and 10m if going through 2 or 3 walls. I installed the ralink drivers and plugged in the adapter which my computer then installed fine. It will pick up some networks including mine which i managed to connect to but only at a very low rate. Not after very long the connection will disappear and so will all the other houses networks. If i then pull it out and plug it in again they appear again for a short while?
I use my parents packard bell netbook in my room and it works fine. It could well be the case that this adapter was pretty cheap from amazon and you get what you pay for..
This and the two attachments contain your required info.
BT Broadband
BT Home Hub 2.0
DSL
[Code]......
I'm using the D-link dir-300 wi-fi router. Cable internet connection. PC is connected to the router by the cable and the laptop via wi-fi. Both machines have the same problem - after some time, although there are no package loss when I'm pinging anything, some services report "connection timeout". Such as PvP.net, EA Online and Turbofilm.tv. Soft reset, hard reset didn't solve anything. Although when PC is connected straight to the main internet cable - there are no problems at all. [code]
View 7 Replies View RelatedI was also struggling with locale area net work.. When i have installed fresh window into my PC. The Locale area plugen showing but no internet conection found. I have restart my PC couple of times while sitting my different internet provider connections. Alteas i have reinstall my window xp so i guess may be its my window problem it have missing some files.
View 1 Replies View RelatedI have a HP nc6120 laptop and I recently switched the hard drive. I installed Windows XP professsional and downloaded drivers from HP homepage (also did a BIOS update)
Local connection via cable is OK (broadcom netxtreme gigabit ethernet) but there isn't wireless connectivity. I downloaded all the wireless drivers, but still HP wireless assistant offers only Bluetooth connection and there isn't a wireless card on the device manager list.
Some time ago, as I formatted my previous drive and downloaded the same drivers from HP homepage, the wireless connection worked like a charm
Well I did something stupid (big surprise) and somehow managed to uninstall something related to the ethernet ports. I get code 28 and a yellow question mark with a little yellow circle with a black,Anyways what do I need to do to fix this, attached details from everest. It's probably something as simple as reinstalling the drivers, but buggered if I can figure out which ones I need.
View 1 Replies View RelatedWhen restarting my PC after a short power failure the D-Link connection wizard autostarts trying to connect to my wlan. After a short while I have a connection and is able to access the internet. The connection wizard, however does not register that a connection has been established and continues to attempt to connect for two minutes, then shuts down and immediately starts for another two-minute try....and so on. If I shut it down it just pops up again.This has never occured before. I run Windows 7 on an HP with an AMD processor.
View 3 Replies View RelatedI have wireless connectivity, but my ethernet local area post will not work. Pinged 198.168.1.1 but got 4 timed out messages. Checked hardware condition and the controller card says it is functioning properly. Running Network Properties shows only the wireless connections, with Local Area Port disconnected.
View 16 Replies View RelatedI recently installed a new SSD and a fresh windows install.After reinstalling everything,I connected my LAN cable and had issues that it would constantly connect and disconnect.Even the lights on the back were flashing on and off.If it stayed on long enough it would establish a connection. I am using my motherboard build in lan adapter.I have a Asus P8P67 Pro, which has the Intel� 82579, 1 x Gigabit LAN Controller. I was able to establish a connection perfectly fine through my wlan stick.I went to the Asus website and downloaded their drivers for the Lan Controller. This did not fix anything.I attempted numerous install and deinstall of the drivers. At that point I went directly to the Intel website and downloaded their most recent drivers. After installing the Intel drivers, I was able to keep a connection, but it was very very slow.Through Lan connection i am barely able to open up Google, but every time I attempt a speed test, the connection is too slow. Though when I connect through Wlan,I get the full connection speeds.The router I am using is a Netgear DG834G v4. Also tested various cable just incase that might be the issue. Also,when i use the same cable and connect it to my Laptop, I get the full connection and no issues.
View 4 Replies View RelatedNetwork Adapter (as displayed in device manager) Realtek PCIe GBE Family Controller (says this device is working properly)I'm running my lan on the integrated network adapter "Realtek PCIe GBE Family Controller" on my motherboard. When I plug in the lan line directly from my router the speed on speedtest.net is around 2 Mbps, i have tested on 2 other computers and they all get around 10 Mbps with the same line. I build this new machine to play games, and sank $800+ on it. I am trying very hard to figure out why my LAN speed is so slow,
View 1 Replies View Relatedok so ive been messing with my aunts desktop trying to get it to run online.
her network adapter SAYS its connected but when i try to actually go online it says its not connected.
i checked the connection and it does say its connected. it is a fresh install and i reinstalled the driver for the internet.
ive unchecked the automatic config for the net options (saw in some suggestions)